Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Headers and edge type connectors are a type of electrical connector used to make connections between printed circuit boards (PCBs) and other electronic devices. They are commonly used in a wide range of applications, including computers, consumer electronics, and industrial equipment.Headers and edge type connectors typically consist of two or more rows of pins or contacts, which are inserted into corresponding sockets or holes on a PCB or other electronic device. They may include features such as polarization, locking mechanisms, or keying to ensure proper alignment and prevent accidental disconnection.Headers and edge type connectors are available in a variety of configurations, with different pitch sizes, pin counts, and orientations. They may be straight or right-angled, and may be designed for surface mount or through-hole mounting.One advantage of headers and edge type connectors is their ability to provide a reliable and secure connection between PCBs and other electronic devices. They are designed to maintain a stable connection, even when subjected to vibration or other environmental factors that can affect other types of connectors.Headers and edge type connectors are also relatively easy to install and remove, making them a convenient option for use in a wide range of applications. They may include features such as shrouding or other protective features to prevent damage to the pins or contacts during handling or use.
Add filters
All
Selected
FTE-135-01-G-DV-ES-A-P
Samtec
Samtec's FTE-135-01-G-DV-ES-A-P header connector features 70 contacts, gold-plated phosphor bronze material, and liquid crystal polymer insulator. With a mating contact pitch of 0.031", it is ideal for board mounting applications in commercial environments with an operating temperature range from -65°C to 125°C.
W/ALIGNMENT PIN,PICK&PLACE PAD
POSITIONING PIN
.164 inch
.055 inch
1.164 inch
RECEPTACLE
BOARD CONNECTOR
GOLD FLASH OVER NICKEL (50)
Gold (Au) - with Nickel (Ni) barrier
MALE
PHOSPHOR BRONZE
RECTANGULAR
SQ PIN-SKT
BLACK
LIQUID CRYSTAL POLYMER
e4
0.031
0.047
STRAIGHT
BOARD
ONE
2
125
-65 Cel
3.302
10u
POLARIZED HOUSING
.75 A
UL
COMMERCIAL
Headers and Edge Type Connectors
.7874
SURFACE MOUNT
70
4.448
FTE-135-01-G-DV-ES-P
Samtec's FTE-135-01-G-DV-ES-P is a 70-contact board connector with gold-plated phosphor bronze contacts. It has a mating contact pitch of 0.032", liquid crystal polymer insulator, and operates b/w -55°C to 125°C. Ideal for commercial applications requiring high reliability and surface mount termination.
PLASTIC PICK&PLACE PAD
0.032
-55 Cel
2.7 A
FTE-135-01-G-DV-P-TR
Samtec's FTE-135-01-G-DV-P-TR is a 70-contact board connector with gold finish, suitable for commercial applications. Featuring a mating contact pitch of 0.031", it has a body length of 1.103" and operates b/w -55°C to 125°C. Ideal for surface mount termination on PCBs with rectangular contact pattern spacing at 3.302mm.
PLASTIC PICK&PLACE PAD,T&R PKG
.12 inch
.07 inch
1.103 inch
FTE
LOCKING
FTE-140-01-G-DH-K-TR
Samtec's FTE-140-01-G-DH-K-TR header connector features 80 contacts, gold finish with nickel barrier, and liquid crystal polymer insulator. With a mating contact pitch of 0.032", it is ideal for board-to-board connections in commercial applications requiring a rated current of 2.7A at temperatures ranging from -55 to 125°C.
.255 inch
1.26 inch
GOLD (10)
NO
RIGHT ANGLE
GENERAL PURPOSE
2.54
0.8
80
94V-0
2.22
FTE-140-01-G-DH-K
Samtec FTE-140-01-G-DH-K is a 80-contact board connector with gold over nickel finish. Featuring 2 rows, it has a mating contact pitch of 0.032" and operates b/w -55°C to 125°C. Ideal for commercial applications requiring high reliability and signal current up to 2.7A.
GOLD OVER NICKEL
FTE-140-03-G-DH-K
Samtec's FTE-140-03-G-DH-K header connector features 80 contacts, gold finish with nickel barrier, and liquid crystal polymer insulator. With a mating contact pitch of 0.032", it is ideal for board-to-board connections in commercial applications requiring a rated current of 2.7A at temperatures ranging from -55 to 125°C.
BCS-110-L-S-TE-002
Samtec BCS-110-L-S-TE-002 is a 10-contact board connector with 0.1" pitch, ideal for commercial applications. Featuring gold mating contact finish over nickel, it offers high durability with 500 cycles and operates b/w -65°C to 125°C temperature range. The connector has a polarization key for easy installation and boasts an insulation resistance of 5Gohm.
2ND PIN POLARIZED
.1 inch
.29 inch
1 inch
PLUG
GOLD (10) OVER NICKEL (50)
Tin (Sn) - with Nickel (Ni) barrier
FEMALE
10 mohm
375VAC
500 Cycles
1.39
5000000000 ohm
e3
BCS
0.1
1
POLAR PIN POSITION
3 A
UL, CSA
SOLDER
10
.834
BCS-125-L-D-TE-003
BOARD CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 375VAC; No. of Connectors: ONE; PCB Contact Row Spacing (mm): 2.54;
3RD PIN POLARIZED
.2 inch
2.5 inch
Matte Tin (Sn) - with Nickel (Ni) barrier
50
BCS-125-L-S-TE-002
Samtec BCS-125-L-S-TE-002 is a 24-contact board connector with 0.1" pitch, ideal for applications requiring -65 to 125°C operating range. Featuring liquid crystal polymer insulator, matte tin finish, and gold mating contacts over nickel barrier for durability and reliability in commercial settings.
SOCKET
24
CLE-108-01-G-DV-K-TR
Samtec CLE-108-01-G-DV-K-TR is a 16-contact board connector with 0.031" pitch, 375VAC voltage rating, and -65 to 125°C operating range. Ideal for commercial applications requiring high durability and polarization key feature.
PICK&PLACE PAD, TAPE&REEL PKG
.125 inch
.123 inch
.252 inch
AU ON NI
BERYLLIUM COPPER
15 mohm
100 Cycles
.556
3.9624
16
.3336
CLE-109-01-G-DV-A-K-TR
Samtec CLE-109-01-G-DV-A-K-TR is a 18-contact board connector with 0.031" pitch, 375VAC voltage rating, and gold finish. Ideal for commercial applications, it features liquid crystal polymer insulator and operates b/w -65 to 125°C. With durability of 100 cycles, it offers high insulation resistance at 5Gohm.
.284 inch
18
CLE-110-01-G-DV-A-K-TR
Samtec CLE-110-01-G-DV-A-K-TR is a 20-contact board connector with 0.031" pitch, 375VAC voltage rating, and gold finish. Ideal for commercial applications, it features liquid crystal polymer insulator, -65 to 125°C operating range, and polarization key for secure mating.
.315 inch
20
CLE-116-01-G-DV-K-TR
Samtec CLE-116-01-G-DV-K-TR is a 32-contact board connector with 0.031" pitch, suitable for commercial applications. It features gold termination finish, 375VAC dielectric voltage, and -65 to 125°C operating temperature range. Ideal for PCB connections requiring durability and high insulation resistance of 5Gohm.
.504 inch
32
CLE-120-01-G-DV-A-K-TR
Samtec's CLE-120-01-G-DV-A-K-TR is a 40-contact board connector with 0.031" pitch, LIQUID CRYSTAL POLYMER insulator, and gold-plated BERYLLIUM COPPER contacts. It operates b/w -65°C to 125°C, has 375VAC dielectric voltage, and offers high durability for commercial applications.
.63 inch
MULTIPLE MATING PARTS AVAILABLE
.8
40
CLE-121-01-G-DV-A-K-TR
Samtec CLE-121-01-G-DV-A-K-TR is a 42-contact board connector with 0.031" pitch, 375VAC voltage rating, and gold over nickel finish. Ideal for commercial applications, it features liquid crystal polymer insulator, -65 to 125°C operating range, and polarization key for secure mating.
.661 inch
42
CLE-121-01-G-DV-A-K
Samtec's CLE-121-01-G-DV-A-K header connector features 42 contacts, 0.031" pitch, and 375VAC dielectric voltage. Ideal for board mounting with liquid crystal polymer insulator, it offers gold finish contact material and operates b/w -65 to 125°C.
PICK & PLACE PAD
CLM-140-02-F-D-P
The Samtec CLM-140-02-F-D-P is a 2-row board connector with a mating contact pitch of 0.039". Featuring liquid crystal polymer insulator material, it has a durability of 100 cycles and can handle up to 1.5A signal current. Ideal for commercial applications requiring reliable connections in temperatures ranging from -65°C to 125°C.
.084 inch
1.592 inch
TIN OVER NICKEL
NOT SPECIFIED
.417
0.039
3.175
FLASH
1.5 A
.9906
.2085
CLP-106-02-G-D-BE-P
Samtec's CLP-106-02-G-D-BE-P is a 2-row, 12-contact board connector with gold-plated phosphor bronze contacts. Featuring a mating contact pitch of 0.05", it is ideal for surface mount applications in commercial settings. The connector has a body length of 0.317", width of 0.12", and depth of 0.09", with insulator made from liquid crystal polymer for durability.
BOTTOM ENTRY, PICK & PLACE PAD
.09 inch
.317 inch
1.112
0.05
20u
1.27
12
CLP-123-02-L-D-P-TR
Samtec's CLP-123-02-L-D-P-TR is a 46-contact board connector with liquid crystal polymer insulator, phosphor bronze contacts, and tin finish. It has a mating contact pitch of 0.05", operates b/w -65 to 125°C, and is ideal for commercial applications requiring high durability and reliability in PCB connections.
PICK&PLACE PAD,TAPE&REEL PKG
1.167 inch
3.7338
1.8 A
46
CLP-128-02-L-D-TR
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE;
1.417 inch
3.23
3.4 A
56
ESQT-130-03-F-D-380
ESQT-130-03-F-D-380 by Samtec is a 30-contact board stacking connector with 0.079" pitch, ideal for commercial applications. Features include 600VAC dielectric voltage, -65 to 105°C operating temp range, and liquid crystal polymer insulator material.
.158 inch
.25 inch
1.185 inch
BOARD STACKING CONNECTOR
600VAC
0.079
105
2.0066
.38 inch
WIRE WRAP
30
FTSH-110-01-F-DV-EJ-A
Samtec's FTSH-110-01-F-DV-EJ-A is a 20-contact board connector with 0.05" mating contact pitch and liquid crystal polymer insulator. Featuring phosphor bronze contacts with gold flash finish, it operates b/w -65 to 125°C. Ideal for commercial applications requiring reliable signal transmission on PCBs with 1.27mm terminal pitch.
.222 inch
1.121 inch
LATCH & EJECT
4.064
CENTER
FTSH-110-01-L-DV-EJ-A
Samtec's FTSH-110-01-L-DV-EJ-A is a 20-contact board connector with 0.05" pitch, ideal for commercial applications. Features include liquid crystal polymer insulator, gold mating contact finish over nickel, and phosphor bronze contact material. Suitable for PCB mounting with straight male contacts in a rectangular pattern.
EJECTOR SHROUD
.135 inch
.44 inch
.5 inch
FTSH-110-01-L-DV-EJ-P
Samtec's FTSH-110-01-L-DV-EJ-P is a 20-contact board connector with a 0.05" mating contact pitch and liquid crystal polymer insulator. It features gold over nickel finish, operates b/w -55 to 125°C, and is ideal for commercial applications requiring reliable surface mount connections on PCBs.
PICK AND PLACE PAD
FTSH-113-01-F-DV-EJ
Samtec's FTSH-113-01-F-DV-EJ is a 26-contact board connector with 0.05" pitch, ideal for commercial applications. Featuring gold flash over nickel finish, it has a max operating temp of 125°C and min of -65°C. With liquid crystal polymer insulator, it offers reliable signal current up to 1.8A.
1.271 inch
26
FTSH-113-01-L-DV-EJ
Samtec's FTSH-113-01-L-DV-EJ is a 26-contact board connector with a mating contact pitch of 0.05". Featuring liquid crystal polymer insulator, it has a max operating temp of 125°C and min of -55°C. Ideal for commercial applications requiring reliable surface mount termination.
.65 inch
FTSH-115-01-F-DV-EJ
FTSH-115-01-F-DV-EJ by Samtec is a 2-row board connector with a mating contact pitch of 0.05 inches. It has a body length of 0.75 inch and a body width of 0.135 inch. This connector is commonly used in commercial applications and can withstand temperatures ranging from -55 to 125°C.
.75 inch
3u
FTSH-120-01-L-DV-EJ-P
Samtec's FTSH-120-01-L-DV-EJ-P is a 40-contact board connector with 0.05" pitch, ideal for commercial applications. Featuring gold over nickel mating contact finish and phosphor bronze contact material, it offers reliable performance at temperatures ranging from -55 to 125°C. With liquid crystal polymer insulator and surface mount termination, this header connector is designed for high-density PCB layouts.
FTSH-120-01-L-DV-EJ
Samtec's FTSH-120-01-L-DV-EJ is a 40-contact board connector with 0.05" mating contact pitch, suitable for commercial applications. Featuring liquid crystal polymer insulator material and gold over nickel finish, it operates b/w -55°C to 125°C temperature range. With a terminal pitch of 1.27mm, this male connector has a rectangular PCB contact pattern for surface mount termination.
FTSH-125-01-F-D-EJ
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Plating Thickness (inch): 3u;
1.247 inch
.11 inch
LTMM-110-01-F-D-SM
LTMM-110-01-F-D-SM by Samtec is a 20-contact board connector with a 0.079" mating contact pitch and liquid crystal polymer insulator. It features tin termination finish, operates b/w -65 to 105°C, and has a dielectric voltage of 600VAC. Ideal for commercial applications requiring reliable male connectors with rectangular PCB contact pattern.
HIGH TEMPERATURE
.237 inch
.19 inch
.884 inch
SFM-105-02-S-D-A-P
SFM-105-02-S-D-A-P by Samtec is a 2-row, 10-contact board connector with a mating contact pitch of 0.05 inches. It features a liquid crystal polymer insulator and has a max operating temperature of 125°C. This connector is commonly used in commercial applications requiring durability and reliable surface mount termination.
ROHS COMPLIANT
.145 inch
.185 inch
.375 inch
GOLD (30) OVER NICKEL (50)
10000 Cycles
.695
2.7432
30u
SFM-107-02-L-D-A-TR
SFM-107-02-L-D-A-TR by Samtec is a 14-contact board connector with 0.05" pitch, suitable for commercial applications. Features Beryllium Copper contacts with Gold over Nickel finish, operating temperature range of -55 to 125°C. Ideal for PCB mounting with straight socket style and polarization key for secure connection.
.475 inch
14
SFM-110-02-S-D-A-P
SFM-110-02-S-D-A-P by Samtec is a 20-contact board connector with 0.05" pitch, suitable for commercial applications. It features liquid crystal polymer insulator, tin finish with nickel barrier, and operates b/w -55°C to 125°C. Ideal for PCB mounting with positioning pin option and straight socket style.
.625 inch
SFM-115-02-S-S-A-TR
SFM-115-02-S-S-A-TR by Samtec is a 15-contact board connector with a 0.05" pitch, suitable for commercial applications. Featuring a liquid crystal polymer insulator and tin finish with nickel barrier, it offers durability up to 10,000 cycles. With a temperature range of -55°C to 125°C, this straight-mount connector is ideal for PCBs requiring reliable surface mount connections.
.095 inch
.875 inch
STAGGERED
15
SFM-115-L2-S-D-A
SFM-115-L2-S-D-A by Samtec is a 30-contact board connector with 0.05" pitch, suitable for commercial applications. Features include Beryllium Copper contacts, Liquid Crystal Polymer insulator, and Tin finish with Nickel barrier. Ideal for PCB mounting with straight socket style and polarization key for secure connection.
.18 inch
.3892
.278
SFM-135-L2-L-D-A-K-TR
SFM-135-L2-L-D-A-K-TR by Samtec is a 70-contact board connector with 0.05" mating contact pitch, suitable for commercial applications. It features liquid crystal polymer insulator material, matte tin termination finish, and beryllium copper contacts. With a max operating temperature of 125°C and UL flammability rating of 94V-0, it offers reliable performance in various PCB mounting scenarios.
1.875 inch
SFM-135-L2-L-D-A-K
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Maximum Operating Temperature (Cel): 125;
SFM-135-L2-L-D-A-P
SFM-135-L2-L-D-A-P by Samtec is a 70-contact board connector with 0.05" pitch, ideal for commercial applications. Features include Beryllium Copper contacts, Liquid Crystal Polymer insulator, and Matte Tin finish with Nickel barrier. Suitable for PCB mounting with a temperature range of -55 to 125°C.
SFM-135-L2-L-D-A-TR
SFM-135-L2-L-D-A-TR by Samtec is a 70-contact board connector with 0.05" pitch, ideal for commercial applications. Features include Beryllium Copper contacts, Matte Tin finish, and Liquid Crystal Polymer insulator. With a temperature range of -55 to 125°C, it offers reliable performance in various environments.
SFM-140-02-L-D-A-K-TR
SFM-140-02-L-D-A-K-TR by Samtec is a 2-row board connector with 80 contacts, featuring Beryllium Copper contacts and Liquid Crystal Polymer insulator. With a mating contact pitch of 0.05", it has a max operating temperature of 125°C and min withdrawal force of 0.556N. Ideal for commercial applications requiring high reliability in PCB connections.
2.125 inch
SFM-140-T2-S-S-A-TR
SFM-140-T2-S-S-A-TR by Samtec is a 40-contact board connector with 0.05" pitch, suitable for commercial applications. It features liquid crystal polymer insulator, tin finish with nickel barrier, and operates b/w -55°C to 125°C. Ideal for PCB mounting with staggered contact pattern and surface mount termination.
SFM-150-02-L-D-A-K-TR
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Insulator Color: BLACK;
2.625 inch
100
SFM-150-02-L-D-A-P-TR
SFM-150-02-L-D-A-P-TR by Samtec is a 2-row, 100-contact board connector with a contact pitch of 1.27mm and body length of 2.625". Featuring Beryllium Copper contacts plated with Gold over Nickel, it offers high reliability for commercial applications. With a temperature range from -55 to 125°C, it is ideal for surface mount termination on PCBs.
SFM-150-02-L-D-A-TR
SFM-150-02-L-D-A-TR by Samtec is a 2-row, 100-contact board connector with a mating contact pitch of 0.05". Featuring Beryllium Copper contacts plated with Gold over Nickel, it has a temperature range of -55 to 125°C. Ideal for commercial applications requiring high reliability and UL certification.
SMM-110-02-S-S-LC
SMM-110-02-S-S-LC by Samtec is a board connector with 10 gold contacts, 0.079" pitch, and 600VAC dielectric voltage. Ideal for commercial applications, it features liquid crystal polymer insulation and operates b/w -65°C to 125°C temperature range. With a split board lock mounting option, this header connector offers reliable performance in various electronic systems.
NONE
SPLIT BOARD LOCK
.079 inch
.14 inch
.79 inch
1.251
SMM
SMM-122-02-S-S-LC
Samtec's SMM-122-02-S-S-LC header connector features 22 contacts with a pitch of 2.0066mm and insulation resistance of 5Gohm. With a body length of 1.738", it is ideal for commercial applications requiring a dielectric voltage withstand of 600VAC and operating temperatures from -65°C to 125°C.
1.738 inch
22
SMM-124-02-S-D-LC
BOARD CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; No. of Rows Loaded: 2; JESD-609 Code: e3;
1.889 inch
4.5466
3.2 A
48
© 2023 All rights reserved
