Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SFM-115-L2-S-D-A by Samtec is a 30-contact board connector with 0.05" pitch, suitable for commercial applications. Features include Beryllium Copper contacts, Liquid Crystal Polymer insulator, and Tin finish with Nickel barrier. Ideal for PCB mounting with straight socket style and polarization key for secure connection.
Median Price
$5.750
Lifecycle Status
Suppliers In-Stock
8
In-Stock Inventory
1k+
DigiKey
1+ parts
100+ parts
$4.184
1k+ parts
-
10k+ parts
Chip1Stop
Mouser Electronics
$6.440
$4.420
$3.790
$3.450
Arrow
$3.990
Verical
Component Electronics Inc.
$8.460
$6.350
$5.500
Vyrian
Nova Conductors
AZTECH Wire
$3.560
$3.420
$3.350
$3.280
Netroflash
The close mating contact pitch allows for high density connections, making this product ideal for applications requiring a compact design.
The high maximum operating temperature ensures reliable performance in various environmental conditions, making this product suitable for a wide range of applications.
With a durability of 10000 cycles, this product offers long-lasting performance and reliability, making it a cost-effective choice for applications requiring frequent connections/disconnections.
The low contact resistance of 15 mohm ensures efficient electrical conductivity, minimizing power loss and signal distortion, making this product ideal for high-performance electronics.
Headers & Edge Type Connectors SFM-115-L2-S-D-A attributes and parameters. Explore more Headers & Edge Type Connectors devices from Samtec
Additional Features:
Board Mounting Option:
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Pattern:
Contact Resistance:
Contact Style:
DIN Conformance:
Durability:
Filter Feature:
IEC Conformity:
Maximum Insertion Force (N):
Insulator Color:
Insulator Material:
JESD-609 Code:
MIL Conformity:
Mating Contact Pitch (inch):
Mating Contact Row Spacing (inch):
Mixed Contacts:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of Connectors:
No. of PCB Rows:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
PCB Contact Pattern:
PCB Contact Row Spacing (mm):
Plating Thickness (inch):
Polarization Key:
Reference Standard:
Reliability:
Sub-Category:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
UL Flammability Code:
Minimum Withdrawal Force (N):
SFM-115-L2-S-D-A Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.40
SB
Founded in 1976, Samtec is much more than just another connector company. We put people first, along with a commitment to exceptional service, quality products and innovative technologies that take the industry further faster. This is enabled by our unique, fully integrated business model, which allows for true collaboration and innovation without the limits of traditional business models. This unique approach allows us to serve customers in 125+ countries with revenues exceeding $1 billion in 2022. We believe that taking care of our customers and our employees is paramount in how we approach our business, and this belief is deeply ingrained throughout Samtec worldwide.
OHN3140U
Tt Electronics Plc
OHN3140U by Tt Electronics Plc is a magnetic field sensor with a max supply voltage of 24V and hysteresis of 2mT. It features an output range of 25mA and operates b/w -20 to 85°C. Ideal for applications requiring precise detection and measurement of magnetic fields in various industries.
LM555CN
Harris Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
2N2222A
Tesla Elektronicke Soucastky
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
INA826AIDGKR
Texas Instruments
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
1N4148
Grande Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SMBJ18CA
Sensitron Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
CRCW080510K0FKEA
Vishay Intertechnology
Vishay Intertechnology's CRCW080510K0FKEA is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 reference standard compliance and -55 to 155 °C operating temperature range.
Continental Device India
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BAV99
Comchip Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
Sinyork
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1 V; No. of Elements: 1; Maximum Output Current: .2 A; Config: SINGLE;
Diodes Incorporated
Vishay Telefunken
Bytesonic Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; No. of Elements: 1;
Baneasa S A
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; Qualification: Not Qualified;
LM358N
Onsemi
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Minilogic Device
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .625 W; Maximum Collector Current (IC): .001 A;
Weitron Technology
BSS138LT1G
BSS138LT1G by Onsemi is a N-CHANNEL FET with 50V DS Breakdown Voltage, 0.2A Drain Current, and 3.5 ohm On Resistance. Ideal for SWITCHING applications due to its ENHANCEMENT MODE operation and built-in DIODE. Operates b/w -55 to 150 °C with small outline package style for surface mount assembly.
5055960601
Molex
BOARD CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE;
70107-0001
Molex 70107-0001 is a board connector with 0.1" pitch, ideal for cable mounting. Featuring polyester insulator material, it has 2 contacts and UL94V-0 flammability rating. This rectangular connector uses crimp termination and male SQ pin-skt contact style, suitable for various edge type applications.
2-640456-4
TE Connectivity
TE Connectivity 2-640456-4 is a 24-contact board connector with 0.1" pitch, suitable for commercial applications. Featuring tin finish, it has a rated current of 5A and operates b/w -55 to 105°C. Ideal for PCBs, this male plug connector offers reliable performance with UL94V-0 flammability rating.
BM05B-SRSS-TB(LF)(SN)
J S T Mfg
BM05B-SRSS-TB(LF)(SN) by J S T Mfg is a 5-contact BOARD CONNECTOR with 0.039" pitch, 100000000 ohm insulation resistance, and 500VAC dielectric voltage. Ideal for PCBs, it features POLYAMIDE insulator, COPPER ALLOY contacts, and operates b/w -25 to 85 °C.
M80-5401042
Harwin Plc
M80-5401042 by Harwin PLC is a 10-contact board connector with 0.079" mating contact pitch, suitable for PCB mounting with a temperature range of -55 to 125°C. Featuring tin finish contacts and glass-filled polyphenylene sulfide insulator, it offers high durability with 500 cycles and UL94V-0 flammability rating. Ideal for commercial applications requiring reliable right-angle mounting in black color housing.
MTSW-102-07-G-S-240
Samtec
Samtec's MTSW-102-07-G-S-240 is a board stacking connector with 0.1" pitch, gold-plated contacts, and glass-filled polyester insulator. Ideal for commercial applications, it features 2.54mm terminal pitch, solder termination, and male contact gender for reliable PCB connections.
TMM-110-01-S-D-SM-TR
The Samtec TMM-110-01-S-D-SM-TR is a 2-row, 20-contact board connector with a mating contact pitch of 0.079". It features tin termination with nickel barrier, gold finish, and phosphor bronze contacts. Ideal for commercial applications requiring a reliable connection in temperatures ranging from -55°C to 125°C.
640456-5
TE Connectivity 640456-5 is a BOARD CONNECTOR with 0.1" pitch, suitable for commercial applications. It features POLYBUTYLENE TEREPHTHALATE insulator, tin finish, and 5A signal current rating. Ideal for PCB mounting with RECTANGULAR contact pattern and FRICTION LOCK option.
1712961105
Molex 1712961105 header connector features 0.075" mating contact pitch, matte tin over nickel termination finish, and polyethylene insulator. With 15 loaded rows and 150 contacts, it is ideal for board connections in commercial applications with a rated signal current of 0.75A.
SF56S006V4BR2000
Japan Aviation Electronics Industry
PCB CONNECTOR; Option: GENERAL PURPOSE; JESD-609 Code: e4; MIL Conformity: NO; Mating Contact Finish: GOLD OVER NICKEL; DIN Conformance: NO;
78171-0004
Molex 78171-0004 is a board connector with 0.047" pitch, suitable for applications requiring 1.5A signal current. Featuring gold nickel finish and liquid crystal polymer insulator, it offers durability of 10 cycles. With a temperature range of -25 to 85°C, this male connector has a total of 4 contacts and is UL certified for reliability in commercial settings.
39-53-2165
Molex 39-53-2165 FFC/FPC Connector features 16 contacts with 0.049" pitch, 0.197" body width, and 0.386" depth. Ideal for PCB applications requiring a 1.9812mm row spacing, this UL-certified connector offers reliable solder termination in commercial settings.
51021-0800
The Molex 51021-0800 is a board connector with 8 contacts, 0.049" pitch, and 0.463" body length. It has an insulation resistance of 100M ohm and operates b/w -40 to 85°C. Ideal for commercial applications requiring a female crimp termination in a locking receptacle design.
09031646921
Harting Electronics & Kg
09031646921 by Harting Electronics & Kg is a Headers & Edge Type Connector with Mating Contact Pitch of 0.1", Body Length of 3.701", and Insulation Resistance of 1000000000000 ohm. Ideal for board connections in applications requiring high durability, it features a PCB Contact Row Spacing of 2.54mm, UL Flammability Code of 94V-0, and Rated Current - Signal at 2A.
1-826656-0
TE Connectivity 1-826656-0 is a board connector with 20 contacts, rated at 5A. It features tin termination finish, PBT insulator, and phosphor bronze contact material. With UL certification and green insulator color, it is ideal for applications requiring high insulation resistance and operating temperatures from -65 to 105°C.
35572-0300
Molex 35572-0300 is a board connector with 3 contacts, 0.098" pitch, and 1000VAC voltage rating. Ideal for commercial applications, it features tin finish contacts, operates b/w -40 to 105°C temperatures, and has UL94V-0 flammability rating.
FFSD-25-01-N
Samtec's FFSD-25-01-N is a 2-row BOARD CONNECTOR with 50 contacts made of BERYLLIUM COPPER. It features IDC termination and FEMALE contact gender, suitable for CABLE mounting applications.
74441-0010
Molex 74441-0010 is a board connector with 20 contacts, 0.031" mating pitch, and 0.433" body length. Ideal for commercial applications, it has a matte tin finish, operates b/w -40 to 85°C, and features a glass-filled polyethylene insulator.
1-640456-3
TE Connectivity 1-640456-3 is a board connector with 13 contacts, 0.1" pitch, and 5A signal current rating. It features tin finish, glass-filled polyester insulator, and operates b/w -55 to 105°C. Ideal for commercial applications requiring reliable connections on PCBs.
357-074-422-212
Edac
Edac 357-074-422-212 is a 74-contact card edge connector with 0.156" pitch, suitable for PCBs with 5A signal current. Featuring a dielectric voltage of 2545VAC and insulation resistance of 5000000000 ohm, it operates b/w -40 to +105°C. Ideal for applications requiring high reliability and durability in electrical connections.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SFM-105-02-S-D
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Contact Style: SQ PIN-SKT;
SFM-120-01-L-D-A
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Body Width: .145 inch;
SFM-110-02-L-D-A-K-TR
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Body or Shell Style: SOCKET;
SFM-110-02-L-D-A
SFM-110-02-L-D-A by Samtec is a 20-contact board connector with 0.05" pitch, ideal for commercial applications. Features include liquid crystal polymer insulator, tin over nickel finish, and straight socket mounting style. With a temperature range of -55 to 125°C, it offers reliable performance in various PCB setups.
SFM-105-02-L-D-A-K-TR
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; IEC Conformity: NO;
SFM-105-02-S-D-A-K-TR
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Termination Type: SURFACE MOUNT;
SFM-110-02-L-D-A-K
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Contact Pattern: RECTANGULAR;
SFM-110-02-L-D-A-TR
SFM-110-02-L-D-A-TR by Samtec is a 20-contact board connector with 0.05" pitch, featuring gold mating contact finish and black insulator color. It uses liquid crystal polymer insulator material and beryllium copper contact material for commercial applications requiring surface mount termination.
SFM-130-02-L-D-A
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Body Depth: .185 inch;
SFM-105-02-S-D-A-P-TR
SFM-105-02-S-D-A-P-TR by Samtec is a 2-row board connector with 10 contacts, featuring Beryllium Copper contact material and Gold over Nickel finish. With a mating contact pitch of 0.05 inch, it has a durability of 10000 cycles and operates b/w -55 to 125°C. Ideal for commercial applications requiring reliable surface mount termination on PCBs.
SFM-110-01-L-D-DS
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Total No. of Contacts: 20;
SFM-120-02-L-DH-TR
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Termination Contact Finish: Tin (Sn) - with Nickel (Ni) barrier; Filter Feature: NO; DIN Conformance: NO;
SFM-108-02-L-D-A-K-TR
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Minimum Operating Temperature: -55 Cel;
SFM-105-02-S-D-A-P
SFM-105-02-S-D-A-P by Samtec is a 2-row, 10-contact board connector with a mating contact pitch of 0.05 inches. It features a liquid crystal polymer insulator and has a max operating temperature of 125°C. This connector is commonly used in commercial applications requiring durability and reliable surface mount termination.
SFM-108-02-L-D-A
SFM-108-02-L-D-A by Samtec is a 16-contact, 2-row board connector with Tin (Sn) finish. It has a terminal pitch of 1.27mm and UL Flammability Code of 94V-0. Ideal for surface mount applications in headers & edge type connectors.
SFM-108-02-L-D-A-N
SFM-108-02-L-D-A-N by Samtec is a 16-contact, 2-row board connector with Tin (Sn) finish. It has a terminal pitch of 1.27mm and UL94V-0 flammability rating. Ideal for surface mount applications in electronics for reliable female socket connections.
SFM-120-02-S-D
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; DIN Conformance: NO;
SFM-105-L2-S-D-A
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Maximum Insertion Force (N): .3892;
SFM-107-02-L-D-A-K-TR
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Polarization Key: POLARIZED HOUSING;
SFM-110-02-L-D-A-K-FR
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Connectors: ONE; Mating Contact Row Spacing (inch): 0.05; Filter Feature: NO;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved