Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Samtec's CLP-123-02-L-D-P-TR is a 46-contact board connector with liquid crystal polymer insulator, phosphor bronze contacts, and tin finish. It has a mating contact pitch of 0.05", operates b/w -65 to 125°C, and is ideal for commercial applications requiring high durability and reliability in PCB connections.
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Nova Conductors
AZTECH Wire
$21.800
Continental Prestige Electronics
Argo Parts USA
Netroflash
Having a low mating contact pitch of 0.05 inch allows for high density connections, making this product suitable for applications requiring compact designs.
The specific body length of 1.167 inch ensures compatibility with standard connectors and provides a stable and secure connection.
The use of Tin with Nickel barrier as termination contact finish offers good conductivity and corrosion resistance, ensuring reliable and durable connections.
The insulator material being Liquid Crystal Polymer provides excellent electrical insulation properties and high-temperature resistance, making the product suitable for demanding environments.
With a rated current of 1.8 A, this connector can handle moderate power levels, making it suitable for signal transmission in various electronic devices.
The mounting type of BOARD ensures easy and secure installation onto circuit boards, enhancing the overall reliability of the connection.
Headers & Edge Type Connectors CLP-123-02-L-D-P-TR attributes and parameters. Explore more Headers & Edge Type Connectors devices from Samtec
Additional Features:
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Pattern:
Contact Resistance:
Contact Style:
Durability:
Maximum Insertion Force (N):
Insulator Color:
Insulator Material:
JESD-609 Code:
Mating Contact Pitch (inch):
Mating Contact Row Spacing (inch):
Mounting Style:
Mounting Type:
No. of Connectors:
No. of PCB Rows:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
PCB Contact Pattern:
PCB Contact Row Spacing (mm):
Plating Thickness (inch):
Rated Current - Signal:
Reference Standard:
Reliability:
Sub-Category:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
Minimum Withdrawal Force (N):
CLP-123-02-L-D-P-TR Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.40
SB
Founded in 1976, Samtec is much more than just another connector company. We put people first, along with a commitment to exceptional service, quality products and innovative technologies that take the industry further faster. This is enabled by our unique, fully integrated business model, which allows for true collaboration and innovation without the limits of traditional business models. This unique approach allows us to serve customers in 125+ countries with revenues exceeding $1 billion in 2022. We believe that taking care of our customers and our employees is paramount in how we approach our business, and this belief is deeply ingrained throughout Samtec worldwide.
2N7002
Vishay Intertechnology
2N7002 by Vishay Intertechnology is a N-CHANNEL FET with 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. Ideal for SWITCHING applications due to its SINGLE configuration with BUILT-IN DIODE. Operates in ENHANCEMENT MODE, suitable for surface mount with GULL WING terminals.
ATMEGA328P-AU
Microchip Technology
ATMEGA328P-AU by Microchip: 8-bit RISC CPU, 20 MHz clock, 23 I/O lines. Ideal for industrial applications with SPI, TWI, USART connectivity and low power mode. Features include 2048 RAM bytes, 1024 EEPROM size, and 16384 ROM words.
BAV99
Comchip Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Infineon Technologies
06035C103KAT2A
KYOCERA AVX
06035C103KAT2A by KYOCERA AVX is a SMT ceramic capacitor with 0.01uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and 10% tolerance. Ideal for applications requiring compact surface mount capacitors with stable performance in a wide temperature range.
LL4148
Synsemi
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Good-ark Electronics
SMBJ18CA
Vishay Semiconductors
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
Tak Cheong Electronics Holdings
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
CRCW06031K00FKEAHP
Vishay Intertechnology's CRCW06031K00FKEAHP is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.33 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance and operating voltage of 75 V.
FDD5614P
Onsemi
FDD5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 45A IDM and 0.1 ohm RDS(ON), operating in ENHANCEMENT MODE at up to 175°C. The PLASTIC/EPOXY package with GULL WING terminals ensures efficient heat dissipation and reliable performance.
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM555CN
Rochester Electronics
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Shape: RECTANGULAR; Surface Mount: NO; No. of Functions: 1;
M39029/58-360
Itt Cannon
CONNECTOR ACCESSORY; Alternate Contacts: 030-2042-000; DIN Conformity: NO; Contact Gender: MALE; Terminal Type: WIRE; MIL-Connector Accessory Name: CONTACT;
2N2222A
Swampscott Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
SS14
Rugao Dachang Electronic
RECTIFIER DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 40 V; Maximum Forward Voltage (VF): .55 V; No. of Elements: 1; Technology: SCHOTTKY;
Bytesonic Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Terminal Position: DUAL; Minimum Operating Temperature: -55 Cel;
OPA2227UA
Burr-Brown Corporation
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
SN65HVD234DR
Texas Instruments
SN65HVD234DR by Texas Instruments is an 8-terminal interface circuit with a data rate of 1 Mbps. Operating temperature ranges from -40 to 125 °C, making it ideal for automotive applications. With a supply voltage of 3.3 V and low current draw of 6 mA, it's suitable for network interfaces in compact designs.
Siliconix
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain Current (ID): .115 A; Operating Mode: ENHANCEMENT MODE;
FTSH-105-01-F-DV-K-P
Samtec
Samtec's FTSH-105-01-F-DV-K-P is a 2-row, 10-contact board connector with a mating contact pitch of 0.05". It features phosphor bronze contacts with gold flash over nickel finish and liquid crystal polymer insulator material. Ideal for commercial applications requiring reliable connections in temperatures ranging from -55°C to 125°C.
1-640456-3
Tyco Electronics Amp
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; DIN Conformance: NO; Mixed Contacts: NO; JESD-609 Code: e3;
B4P-VH-FB-B(LF)(SN)
J S T Mfg
B4P-VH-FB-B(LF)(SN) by J S T Mfg is a 4-contact board connector with 0.156" mating contact pitch, 0.698" body length, and 0.382" body width. It features tin (Sn) termination contact finish and glass-filled polybutylene terephthalate insulator material. Ideal for applications requiring a male straight mounting style connector with solder termination type.
09061486901
Harting Electronics & Kg
09061486901 by Harting Electronics & Kg is a Headers & Edge Type Connector with Mating Contact Pitch of 0.2", Insulation Resistance of 1TΩ, and Dielectric Withstanding Voltage of 1550VAC. Ideal for board connections in applications requiring durability, reliability, and high current signal transmission at temperatures ranging from -65 to 125°C.
502
Keystone Electronics
PCB CONNECTOR; Option: GENERAL PURPOSE; Contact Material: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE; DIN Conformance: NO; MIL Conformity: NO;
BM04B-SRSS-TBT(LF)(SN)
BM04B-SRSS-TBT(LF)(SN) by J S T Mfg is a 4-contact BOARD CONNECTOR with TIN finish. It features COPPER ALLOY contacts, UL 94V-0 flammability rating, and SURFACE MOUNT termination. Ideal for applications requiring reliable male connectors in straight mounting style on circuit boards.
53398-0471
Molex
53398-0471 by Molex is a board connector with 0.049" mating contact pitch, 100M ohm insulation resistance, and 250VAC dielectric voltage. Ideal for applications requiring a male blade pin-skt contact style, this connector has a natural insulator color and operates b/w -40 to 85°C.
518-64-2
W+p Products
518-64-2 by W+p Products is a BOARD CONNECTOR with 64 contacts, rated at 1A signal current. Featuring POLYETHYLENE insulation material, it has a dielectric voltage of 800VAC and operates b/w -25 to 85°C. Ideal for cable mounting applications requiring a crimp termination type with female contact gender.
306-022-520-102
Edac
Edac 306-022-520-102 is a 22-contact card edge connector with 0.156" pitch, rated at 5A power. With POLYETHYLENE POLYESTER insulator and UL94V-0 flammability, it operates b/w -40 to 105°C. Ideal for board mounting applications requiring high insulation resistance and dielectric voltage withstand capabilities.
B2B-PH-SM4-TB
B2B-PH-SM4-TB by J S T Mfg is a BOARD CONNECTOR with 0.079" pitch, suitable for applications requiring 2A signal current. Featuring POLYAMIDE insulator and COPPER ALLOY contacts, it has an operating temperature range of -25 to 85°C and dielectric voltage of 800VAC.
2-640456-3
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; UL Flammability Code: 94V-0; Terminal Pitch (mm): 2.54;
7-188275-4
TE Connectivity
TE Connectivity 7-188275-4 is a FFC/FPC connector with 0.05" contact pitch, rated for 1.5A signal current at 100V. With POLYAMIDE46 insulator and UL94V-0 flammability rating, it's ideal for board mounting applications requiring high reliability in commercial settings.
B03B-PASK-1(LF)(SN)
B03B-PASK-1(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 3A signal current rating, 0.079" contact pitch, and 800VAC dielectric voltage. Ideal for board mounting applications, it features GLASS FILLED POLYBUTYLENE TEREPHTHALATE insulator material and tin over copper mating finish. Operating b/w -25 to 85 °C, this UL-rated connector offers high insulation resistance of 1000000000 ohm.
FTSH-105-01-F-DV-K-TR
Samtec's FTSH-105-01-F-DV-K-TR is a 2-row, 10-contact board connector with a contact pitch of 0.05". It features phosphor bronze contacts with gold flash over nickel finish and liquid crystal polymer insulator. Ideal for commercial applications requiring reliable connections in temperatures ranging from -55°C to 125°C.
8-5353189-0
TE Connectivity 8-5353189-0 is a board stacking connector with 140 contacts, 2 rows, and 0.024" mating pitch. Ideal for commercial applications, it features a 200VAC dielectric voltage rating and polyethylene insulation material. Operating b/w -40°C to 85°C, this female connector offers durability with a 50-cycle lifespan.
62684-401100ALF
Amphenol Communications Solutions
62684-401100ALF by Amphenol: FFC/FPC connector with 40 contacts, 0.020" pitch, gold finish. Ideal for board mounting in applications requiring high reliability and signal integrity.
S2B-PH-SM4-TB
S2B-PH-SM4-TB by J S T Mfg is a BOARD CONNECTOR with 2 contacts, COPPER ALLOY material, and TIN finish. It has a terminal pitch of 2mm for SURFACE MOUNT applications in headers & edge type connectors. The connector is UL 94V-0 rated and suitable for RIGHT ANGLE mounting on boards.
1761606-3
TE Connectivity's 1761606-3 is a board connector with 10 contacts, 2 rows, and a mating contact pitch of 0.1". It features a body length of 0.8", insulation resistance of 5G ohm, and operates b/w -65°C to 105°C. Ideal for commercial applications requiring reliable signal connections on PCBs.
FTSH-105-01-L-DV
The Samtec FTSH-105-01-L-DV is a 2-row, 10-contact board connector with a contact pitch of 0.05". Featuring phosphor bronze contacts plated with gold over nickel, it operates b/w -55°C to 125°C. Ideal for commercial applications requiring a reliable, surface-mountable connector with a UL94V-0 flammability rating.
2-1761603-5
TE Connectivity 2-1761603-5 is a dual-row board connector with 14 contacts, rated at 1A. It features a contact pitch of 0.1", insulation resistance of 5G ohm, and operates b/w -65 to 105°C. Ideal for commercial applications requiring reliable male connectors with solder termination in blue color.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
CLP-103-02-L-DH-TR
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Reference Standard: UL;
CLP-103-02-L-D-TR
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Contact Pattern: RECTANGULAR;
CLP-110-02-L-D
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Mixed Contacts: NO;
CLP-103-02-L-DH
The Samtec CLP-103-02-L-DH is a 2-row board connector with a mating contact pitch of 0.05". It features phosphor bronze contacts with gold finish, suitable for commercial applications. With a body length of 0.167" and termination type as surface mount, it offers reliable connections in PCB designs.
CLP-103-02-L-D
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; PCB Contact Row Spacing (mm): 3.23;
CLP-103-02-L-D-BE
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; PCB Contact Row Spacing (mm): 3.74;
CLP-103-02-L-D-A
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Plating Thickness (inch): 10u;
CLP-103-02-L-D-A-TR
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; DIN Conformance: NO;
CLP-105-02-F-D-A-P-FR
BOARD CONNECTOR; JESD-609 Code: e3; Termination Contact Finish: TIN OVER NICKEL;
CLP-105-02-F-DH-TR
Samtec's CLP-105-02-F-DH-TR is a 2-row board connector with 10 contacts, featuring a mating contact pitch of 0.05" and termination finish of Tin (Sn) with Nickel (Ni). Ideal for surface mount applications on PCBs, this header connector has a body length of 0.267", width of 0.135", and depth of 0.12".
CLP-105-02-F-D-P-TR
Samtec's CLP-105-02-F-D-P-TR is a 2-row, 10-contact board connector with a mating contact pitch of 0.05". It features liquid crystal polymer insulator, phosphor bronze contacts with gold flash finish, and surface mount termination. Ideal for commercial applications requiring high reliability and straight mounting style.
CLP-105-02-F-DH-A
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; PCB Contact Pattern: RECTANGULAR;
CLP-103-02-L-D-BE-TR
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE;
CLP-105-02-F-D-A-K-FR
Samtec's CLP-105-02-F-D-A-K-FR is a 2-row, 10-contact board connector with Tin (Sn) finish. It has a pitch of 1.27mm and UL94V-0 flammability rating. Ideal for surface mount applications in various electronic devices.
CLP-105-02-F-D-BE
CLP-107-02-F-D
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Filter Feature: NO;
CLP-103-02-L-D-BE-A
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Insulator Material: LIQUID CRYSTAL POLYMER;
CLP-103-02-L-D-BE-A-TR
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Body Width: .12 inch;
CLP-105-02-F-D-K-TR
Samtec's CLP-105-02-F-D-K-TR is a 2-row, 10-contact board connector with a mating contact pitch of 0.05". It features a liquid crystal polymer insulator, phosphor bronze contacts with gold flash finish, and surface mount termination. Ideal for commercial applications requiring reliable connections on PCBs.
CLP-107-02-L-DH
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Additional Features: LOW PROFILE, E.L.P.;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved