Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Add filters
All
Selected
R141306000
Radiall S A
Radiall S A's R141306000 BNC Connector features 0.13 dB insertion loss, 1.22 VSWR, and 50 ohm impedance. Ideal for RF applications up to 5 GHz, it has a bayonet coupling type and gold over nickel termination for reliable signal transmission in cable and panel mounting setups.
APPLICABLE CABLES: RG 174, RG 316; CAPTIVE CENTER CONTACT
JACK
50 ohm
RF BNC CONNECTOR
NOT SPECIFIED
GOLD OVER NICKEL
FEMALE
BAYONET
NO
.13 dB
POLYTETRAFLUOROETHYLENE
e4
MULTIPLE MATING PARTS AVAILABLE
STRAIGHT
CABLE AND PANEL
5 GHz
GENERAL PURPOSE
YES
CRIMP
1.22
R141308000
Radiall S A's R141308000 BNC Connector features 0.13 dB insertion loss, 1.22 VSWR, and 50 ohm impedance. Ideal for RF applications up to 5 GHz, it has a bayonet coupling type and gold-plated contacts with nickel barrier for reliable signal transmission in cable and panel installations.
APPLICABLE CABLES: RG 58, RG 141; CAPTIVE CENTER CONTACT
Gold (Au) - with Nickel (Ni) barrier
R141327000
Radiall S A's R141327000 BNC Connector features 0.13 dB insertion loss, 1.22 VSWR, and 50 ohm impedance. Ideal for RF applications up to 5 GHz, with bayonet coupling, gold termination finish, and PTFE insulator.
APPLICABLE CABLES: RG 58, RG 141, RG 142, RG 223, RG 400
POLYTETRAFLUORO ETHYLENE
CLAMP
R142004000
R142004000 by Radiall S A is a BNC Connector with 0.2 dB Insertion Loss, Gold (Au) - Nickel (Ni) Termination, and 1.3 VSWR. Ideal for RF applications up to 1.5 GHz, featuring Bayonet Coupling and PTFE Insulator for MIL and IEC conformity. Suitable for 75 ohm systems requiring male contact gender and cable mounting with clamp termination.
STANDARDS: MIL-C-39012; IEC 169-8, APPLICABLE CABLE: RG 179, VSWR MAX AT 1 GHZ
PLUG
75 ohm
MALE
.2 dB
CABLE
1
1.5 GHz
1.3
R142016000
R142016000 by Radiall S A is a RF BNC connector with 75 ohm impedance and 1.5 GHz operating frequency, featuring 0.2 dB insertion loss and 1.3 VSWR. Ideal for applications requiring MIL and IEC conformity, it has a bayonet coupling type, gold termination finish, PTFE insulator, male contact gender, and plug body style for cable mounting.
STANDARDS: MIL-C-39012; IEC 169-8, APPLICABLE CABLE: RG 59, VSWR MAX AT 1 GHZ
GOLD
R142017000
R142017000 by Radiall S A is a BNC connector with 0.2 dB insertion loss, 1.3 VSWR, and 75 ohm characteristic impedance. It is used for RF applications up to 1.5 GHz, featuring bayonet coupling and clamp termination.
STANDARDS: MIL-C-39012; IEC 169-8, APPLICABLE CABLE: RG 6A/U, VSWR MAX AT 1 GHZ
NOT APPLICABLE
R316257000
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body or Shell Style: JACK; Characteristic Impedance: 50 ohm; Termination Contact Finish: NOT APPLICABLE;
APPLICABLE CABLES: RG 58C/U; RG 141A/U; RG 142B/U; RG 223/U; RG 303/U; RG 400/U
2 GHz
1.6
R316405000
R316405000 by Radiall S A is a BNC Connector with Bayonet coupling, 50 ohm impedance, and 2 GHz operating frequency. It features silver termination finish for RF applications. Ideal for panel and cable mounting in high-frequency systems requiring low VSWR.
RECEPTACLE
Silver (Ag)
SOLDER
R141007000
R141007000 by Radiall S A is a BNC Connector with 0.2 dB Insertion Loss, 1.3 VSWR, and 75 ohm Impedance. It is ideal for RF applications up to 1 GHz, featuring Bayonet Coupling and Gold/Nickel Termination for MIL and IEC conformity.
STANDARDS: MIL-C-39012; IEC-169-8
1 GHz
R141008000
R141008000 by Radiall S A is a BNC connector with an insertion loss of 0.13 dB and a voltage standing wave ratio of 1.22. It is commonly used in RF applications up to 4 GHz, featuring a bayonet coupling type and a 50 ohm characteristic impedance.
APPLICABLE CABLES: RG 58; RG 141; RG 142
4 GHz
1-1478031-0
TE Connectivity
TE Connectivity 1-1478031-0 is a BNC Connector with panel mount, bayonet coupling, and 75 ohm impedance. Ideal for RF applications up to 2 GHz, it features polyethylene insulation, solder termination, and zinc alloy shell for durability in commercial settings.
LOW PROFILE
.518 inch
.579 inch
RG Coax Cable
COAX
50 Cycles
5000000000 ohm
WHITE
POLYETHYLENE
LOCKING
RIGHT ANGLE
BOARD AND PANEL
ONE
85
-55 Cel
COMMERCIAL
NICKEL
ZINC ALLOY
RF BNC Connectors
.169 inch
5-1634506-1
TE Connectivity's 5-1634506-1 BNC Connector features 50 ohm impedance, POLYMETHYLPENTENE insulator, and 4 GHz operating frequency. Ideal for RF applications, this connector has a durable zinc alloy shell with nickel finish and female coax contact gender.
.657 inch
3 mohm
POLYMETHYLPENTENE
115/230VAC
BOARD
.125 inch
5-1634506-2
TE Connectivity's 5-1634506-2 BNC Connector features insulation resistance of 5000000000 ohm, body depth of 0.657 inch, and bayonet coupling type. Ideal for RF applications with a characteristic impedance of 75 ohm, this connector is durable with 50 cycles and operates b/w -55 to 85 °C.
1-1337541-0
TE Connectivity BNC Connector 1-1337541-0 features 50 ohm impedance, 4 GHz frequency, and 165°C max temp. Ideal for RF applications, it has a bayonet coupling type and polyethylene insulator. With female coax contact style and solder termination, this nickel-finished connector is durable for commercial use.
ROHS COMPLIANT
.581 inch
1.374 inch
.622 inch
165
-65 Cel
.228 inch
1-1337543-0
TE Connectivity 1-1337543-0 is a BNC Connector with panel mount, bayonet coupling, and 50 ohm impedance. Ideal for RF applications up to 4 GHz, it features a durable zinc alloy shell and PE insulator for reliable performance in commercial settings.
PE
.193 inch
1-1478032-0
TE Connectivity 1-1478032-0 is a BNC Connector with panel mount, suitable for RG Coax Cable. Features include 75 ohm impedance, 2 GHz frequency, and polyethylene insulator material. Ideal for RF applications in commercial settings due to its durability and reliability.
1-1478033-0
TE Connectivity's 1-1478033-0 is a BNC connector with a body length of 0.622 inch, body width of 0.581 inch, and body depth of 1.374 inch. It is commonly used in RF applications with RG Coax Cable and has a max operating frequency of 2 GHz.
1-1634612-0
TE Connectivity's 1-1634612-0 BNC Connector features panel mount, bayonet coupling, and polyethylene insulator. With a characteristic impedance of 50 ohm and max operating frequency of 4 GHz, it is ideal for RF applications requiring durable connections in commercial settings.
BLACK
.173 inch
5-1634500-0
TE Connectivity's 5-1634500-0 BNC Connector features a body diameter of 0.539", insulation resistance of 5000000000 ohm, and max operating frequency of 4 GHz. Ideal for RF applications, this connector has a bayonet coupling type, polymethylpentene insulator material, and is suitable for RG-174A/U cable termination.
APPLICABLE CABLES: RG 174A/U; RG 188A/U; RG 316/U
.677 inch
.539 inch
RG-174A/U
5-1634500-2
TE Connectivity's 5-1634500-2 BNC Connector features a body diameter of 0.539", insulation resistance of 5000000000 ohm, and max operating frequency of 4 GHz. Ideal for RF applications, this connector has a bayonet coupling type, polymethylpentene insulator material, and is suitable for RG-58C/U cable termination.
APPLICABLE CABLES: RG 58C/U; RG 141A/U; RG 303/U
RG-58C/U
5-1634503-1
TE Connectivity's 5-1634503-1 BNC Connector features 50 ohm impedance, 0.2 dB insertion loss, and 5000000000 ohm insulation resistance. Ideal for RF applications up to 4 GHz with a max operating temperature of 85°C. The connector is durable with a shell made of zinc alloy and termination via soldering.
.177 inch
5-1634503-3
TE Connectivity's 5-1634503-3 BNC Connector features Insulation Resistance of 5000000000 ohm, Body Depth of 0.539 inch, and Coupling Type: BAYONET. Ideal for RF applications with a max operating frequency of 2 GHz, this connector is durable with a durability of 50 cycles and suitable for commercial use.
5-1634504-1
TE Connectivity's 5-1634504-1 BNC Connector features Bayonet coupling, PBT-Polyester insulator, and 50 ohm impedance. Ideal for RF applications up to 4 GHz, this female jack connector with solder termination operates b/w -55°C to 85°C.
PBT-POLYESTER
PANEL
5-1634504-2
TE Connectivity's 5-1634504-2 BNC Connector features insulation resistance of 5000000000 ohm, body depth of 0.421 inch, and bayonet coupling type. Ideal for RF applications with characteristic impedance of 75 ohm and max operating frequency of 2 GHz. Suitable for commercial use with durability of 50 cycles and operating temperature range from -55 to 85 °C.
.421 inch
.192 inch
5-1634511-2
TE Connectivity's 5-1634511-2 BNC Connector features Bayonet coupling, Polymethylpentene insulator, and 50 ohm impedance. Ideal for RF applications up to 4 GHz, it has a female contact gender and straight mounting style for cable termination. Operating temperatures range from -55°C to 85°C.
APPLICABLE CABLES: RG 58C/U; RG 141A/U
5-1634513-1
5-1634513-1 by TE Connectivity is a BNC Connector with 0.378" body diameter, 5000000000 ohm insulation resistance, and 0.433" body depth. It is used in RF applications at up to 4 GHz frequency, featuring POLYTETRAFLUOROETHYLENE insulator material and FEMALE contact gender for durability of 50 cycles.
.433 inch
.378 inch
.137 inch
5-1634514-0
TE Connectivity's 5-1634514-0 is a BNC Connector with Bayonet coupling, Polymethylpentene insulator, and 75 ohm impedance. Ideal for RF applications up to 2 GHz, it features a female crimp termination and nickel-finished zinc alloy shell for cable mounting.
APPLICABLE CABLES: RG 59B/U; RG 62A/U; RG 140/U; RG 210/U
5-1634516-1
TE Connectivity 5-1634516-1 is a BNC Connector with Bayonet coupling, Polyphthalamide insulator, and 50 ohm impedance. Ideal for RF applications up to 4 GHz, it features a female crimp termination in a zinc alloy shell for panel mounting.
POLYPHTALAMIDE
5-1634516-5
TE Connectivity 5-1634516-5 is a BNC Connector with Bayonet coupling, Polyphthalamide insulator, and 75 ohm impedance. Ideal for RF applications up to 2 GHz, featuring female crimp termination and nickel-finished zinc alloy shell for panel mounting. Operating temperature ranges from -55 to 85°C.
5-1634523-1
TE Connectivity 5-1634523-1 is a BNC Connector with Bayonet coupling, Polymethylpentene insulator, and 50 ohm impedance. Ideal for RF applications up to 4 GHz, it features a female solder termination in a straight jack style for panel mounting.
5-1634556-0
5-1634556-0 by TE Connectivity is a BNC Connector with 50 ohm impedance, PTFE insulator, and zinc alloy shell. Ideal for RF applications up to 4 GHz, it features bayonet coupling, female contact gender, and solder termination. Operating from -55°C to 85°C, this connector offers high durability with 50 cycles.
75 OHM ALSO AVAILABLE
.431 inch
.131 inch
1-1337542-0
TE Connectivity 1-1337542-0 is a BNC Connector with panel mount, ideal for RF applications. Featuring 50 ohm impedance, it has a max frequency of 4 GHz and insulation resistance of 5 Gohm. With a durable design for commercial use, this connector offers reliable performance in temperatures ranging from -55 to 85°C.
Tin (Sn)
BRASS
e3
1.15
1-1634613-0
TE Connectivity BNC Connector 1-1634613-0 features panel mount, 50 ohm impedance, and 4 GHz operating frequency. Ideal for RF applications requiring durable, right angle mounting with solder termination on RG Coax Cable.
1-1634622-0
TE Connectivity 1-1634622-0 is a BNC Connector with body dimensions of 0.579" x 0.622" x 0.622". It has an insulation resistance of 5G ohm, operates b/w -55°C to 85°C, and supports RG Coax Cable. Ideal for RF applications up to 2GHz, it features a bayonet coupling type and polyethylene insulator material.
105-1171-1
Trompeter Electronics
105-1171-1 by Trompeter Electronics is a BNC Connector with Nickel finish, Bayonet coupling, and 50 ohm impedance. Ideal for RF applications, it features male gender, crimp termination, and straight mounting on cables.
220
5413524-2
TE Connectivity's 5413524-2 BNC Connector features a panel mount design with dimensions of 0.76" x 0.625" x 0.625". With an insulation resistance of 5G ohm, it is ideal for RF applications up to 1GHz. The connector has a bayonet coupling type and can withstand temperatures from -55°C to 85°C.
.625 inch
.76 inch
12 mohm
500 Cycles
1500 V
.135 inch
5413524-5
TE Connectivity's 5413524-5 BNC Connector features a body depth of 0.625", rated voltage of 1500V, and bayonet coupling type. Ideal for RF applications, this connector has a characteristic impedance of 50Ω, max operating frequency of 1GHz, and insulator material made from polymethylpentene.
COMPLIANT BOARDLOCK
5413558-1
TE Connectivity's 5413558-1 BNC Connector features a body diameter of 0.414", insulation resistance of 5G ohm, and max operating frequency of 2GHz. Ideal for RF applications, this right-angle jack connector with bayonet coupling is durable with a zinc alloy shell and polymethylpentene insulator.
.432 inch
.414 inch
16 mohm
15.568
.17 inch
.278
6747
Pomona Electronics
Pomona Electronics' 6747 BNC Connector features gold termination, bayonet coupling, and PTFE insulator. Ideal for RF applications with 75 ohm impedance, 3 GHz frequency, and solder termination on a board mount for high-quality signal transmission.
CAPTIVE CENTER CONTACT
Gold (Au)
BERYLLIUM COPPER
3 GHz
1.35
1058016-1
TE Connectivity's 1058016-1 is a BNC connector with panel mount capability. It has a body depth of 0.59 inch and a bayonet coupling type. With a max operating frequency of 4 GHz, it is commonly used in RF applications for its 50 ohm characteristic impedance and solder termination type.
.59 inch
TFE FLUOROCARBON
R142334700
Radiall S A's R142334700 is a BNC Connector with Bayonet coupling, PTFE insulator, and 75 ohm impedance. Ideal for RF applications up to 6 GHz, it features panel mount capability and crimp termination for female contacts in straight mounting style.
6 GHz
1.08
1-5227161-7
TE Connectivity 1-5227161-7 is a BNC Connector with 0.581" body length, 50 ohm impedance, and 4 GHz max frequency. Ideal for RF applications, it features bayonet coupling, PBT-POLYESTER insulator, and zinc alloy shell material.
.162 inch
BNC7T-P-C-GN-ST-CA3
Samtec
Samtec BNC7T-P-C-GN-ST-CA3 is a RF BNC connector with bayonet coupling, gold over nickel termination, and brass contact material. Ideal for 4 GHz applications with 75 ohm impedance, it features a VSWR of 1.3 and male gender plug suitable for cable mounting using crimp solder termination.
APPLICABLE CABLE: RG 179
GOLD (10) OVER NICKEL (50)
BNC7T
CRIMP SOLDER
31-70261
Amphenol
Amphenol 31-70261 is a BNC connector with gold termination, bayonet coupling, and male contact gender. It is used for RF applications requiring crimp solder termination on cable mounts.
APPLICABLE CABLES: RG 179/U, RG 187A/U
GOLD (30)
456E-717
The Amphenol 456E-717 is a BNC connector with panel mount and filter feature. It has termination contact finish in TIN, mating contact finish in gold over nickel, and phosphor bronze contact material. Ideal for RF applications requiring female right angle mounting on board or panel.
GOLD (10) OVER NICKEL
TIN
PHOSPHOR BRONZE
112587
Amphenol 112587 is a BNC connector with gold termination for RF applications. It features bayonet coupling, PTFE insulator, and panel mount capability. Ideal for connecting cables in straight configurations requiring reliable signal transmission.
2-331350-1
TE Connectivity's 2-331350-1 BNC Connector features 0.2 dB insertion loss, bayonet coupling, and PTFE insulator. Ideal for RF applications with 50 ohm impedance, it operates b/w -65 to 165 °C and supports cable mounting with crimp termination up to 4 GHz frequency.
AMP
RG 58B, RG 58C, RG 58A, RG 58
SILVER
R141075000W
R141075000W by Radiall S A is a RF BNC connector with 50 ohm impedance, 0.13 dB insertion loss, and 1.22 VSWR. It features bayonet coupling, PTFE insulator, and crimp termination for applications up to 4 GHz in military and IEC compliant setups.
© 2023 All rights reserved
