Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Radiall S A's R141306000 BNC Connector features 0.13 dB insertion loss, 1.22 VSWR, and 50 ohm impedance. Ideal for RF applications up to 5 GHz, it has a bayonet coupling type and gold over nickel termination for reliable signal transmission in cable and panel mounting setups.
Median Price
$9.845
Lifecycle Status
Suppliers In-Stock
18
In-Stock Inventory
1k+
Powell Electronics
1+ parts
$4.110
100+ parts
-
1k+ parts
$3.510
10k+ parts
Richardson RFPD
$5.320
$4.860
Farnell
$10.090
$7.160
$6.440
DigiKey
$12.030
$8.689
$7.387
Mouser Electronics
$12.350
$9.540
$7.460
Element14
$16.330
$11.790
$10.060
Newark
$16.500
$13.050
$11.600
TTI Europe
$4.257
$3.468
Chip1Stop
Heilind Electronics
$9.600
Interstate Connecting
$8.688
DF Sales Co.
$7.250
R&J Components
Vyrian
Nova Conductors
ACDS - Activité Composants Distribution Service
Right Parts Inc.
Continental Prestige Electronics
$9.500
$6.690
$6.020
Corohmni
$10.637
Argo Parts USA
Perfect Parts
Aranea Global
The panel mount feature allows for easy and secure installation onto a panel, ensuring a stable connection.
Low insertion loss of 0.13 dB ensures minimal signal degradation, making this connector ideal for high-frequency applications.
The gold over nickel finish provides excellent conductivity and corrosion resistance, ensuring reliable performance over time.
The bayonet coupling design allows for quick and secure connections, making it easy to install and remove the connector.
The PTFE insulator material offers superior electrical properties and high temperature resistance, ensuring stable signal transmission.
The RF BNC connector is compatible with a wide range of RF applications, making it a versatile choice for various setups.
A low VSWR of 1.22 indicates efficient power transfer and minimal signal reflections, improving overall system performance.
This connector can be mounted on both cables and panels, offering flexibility in installation options.
The 50 ohm characteristic impedance matches common RF systems, ensuring optimal signal transfer and minimal signal loss.
The crimp termination allows for secure and reliable connections, reducing the risk of signal interference or loss.
The female contact gender allows for easy mating with male connectors, providing a secure and reliable connection.
The jack style body or shell design is commonly used in RF applications, making it a suitable choice for various setups.
The straight mounting style offers a simple and easy installation process, ensuring a secure connection without added complications.
With a high maximum operating frequency of 5 GHz, this connector is suitable for high-speed data transmission and RF applications.
BNC Connectors R141306000 attributes and parameters. Explore more BNC Connectors devices from Radiall S A
Additional Features:
Body or Shell Style:
Characteristic Impedance:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Coupling Type:
DIN Conformance:
Filter Feature:
IEC Conformity:
Insertion Loss:
Insulator Material:
JESD-609 Code:
MIL Conformity:
Mating Info.:
Mounting Style:
Mounting Type:
Maximum Operating Frequency:
Option:
Panel Mount:
Termination Type:
Voltage Standing Wave Ratio:
R141306000 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.10
SB
NSN
5935-01-351-2906, 5935013512906
NIIN
013512906
Since 1952, we have been enabling the future and collaborating with our customers to succeed. We have developed an award winning reputation and established strong relationships with our customers by providing innovative solutions. Part of being the best is supplying products that customers can trust for unrivaled repeatability and reliable performance. That’s why we’ve invested in facilities around the world that specialize in manufacturing capabilities critical to manufacturing the finest interconnect components to support your most demanding applications. Our commitment is to continue to be the market leader you rely on – in every region around the world – so that you can be the leader in your field.
BAV99LT1G
Onsemi
BAV99LT1G by Onsemi is a series connected diode with 2 elements in a small outline package. It has a max reverse recovery time of 0.006 us and can handle up to 100V repetitive peak reverse voltage. Ideal for rectification applications, this diode operates b/w -65°C to 150°C temperature range.
SS14
General Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Vishay Intertechnology
2N7002 by Vishay Intertechnology is a N-CHANNEL FET with 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. Ideal for SWITCHING applications due to its SINGLE configuration with BUILT-IN DIODE. Operates in ENHANCEMENT MODE, suitable for surface mount with GULL WING terminals.
SMBJ18CA
Thinking Electronic Industrial
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Config: SINGLE; No. of Phases: 1; No. of Elements: 1;
M39029/56351
Esterline Technologies
CONNECTOR ACCESSORY; IEC Conformity: NO; Contact Gender: FEMALE; DIN Conformity: NO; MIL-Connector Accessory Name: CONTACT; Tool Settings: M22520/2-10;
LM107H
Advanced Micro Devices
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Maximum Bias Current (IIB) @25C: .075 uA;
BSS138LT3G
BSS138LT3G by Onsemi is a N-CHANNEL FET with a min DS breakdown voltage of 50V. It is used for switching applications and has a max drain current of 0.2A and max drain-source on resistance of 3.5 ohm.
CRCW06031K00FKEAHP
Vishay Intertechnology's CRCW06031K00FKEAHP is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.33 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance and operating voltage of 75 V.
Weitron Technology
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Terminal Finish: TIN LEAD; Maximum Operating Temperature: 150 Cel;
CRGCQ0805F10R
TE Connectivity
TE Connectivity's CRGCQ0805F10R is a 10 ohm fixed resistor with 1% tolerance and 400 ppm/°C temperature coefficient. It is a surface mount thick film resistor in an 0805 package, suitable for applications requiring precise resistance values in compact electronic circuits.
Diodes Incorporated
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
NC7WZ17P6X
The Onsemi NC7WZ17P6X is a logic gate with 2 functions, featuring a propagation delay of 13.1 ns at 1.8V supply voltage. Ideal for industrial applications, it operates b/w -40 to 85°C and has a max power supply current of 100mA. With Schmitt Trigger technology and small outline packaging, it suits compact electronic designs requiring fast signal processing.
ULN2803A
Rochester Electronics
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Additional Features: LOGIC LEVEL COMPATIBLE; Qualification: Not Qualified;
BAV99
Allegro MicroSystems
RECTIFIER DIODE; Terminal Position: END; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Iskra Semic Capacitors Industry
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Operating Temperature: 200 Cel; JESD-609 Code: e0; Maximum Non Repetitive Peak Forward Current: 2 A;
DS18B20
Maxim Integrated
DS18B20 by Maxim Integrated is a 12-bit digital temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Commonly used in applications requiring precise temperature monitoring like HVAC systems and industrial automation.
BSS138
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Terminal Finish: Matte Tin (Sn) - annealed;
LM358M
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
Wuxi Xuyang Electronic
5413194-1
TE Connectivity's 5413194-1 BNC Connector features bayonet coupling, polymethylpentene insulator, and 75 ohm impedance. Ideal for RF applications up to 4 GHz, this right-angle jack connector with solder termination is UL certified for commercial use.
31-5637
Amphenol
Amphenol 31-5637 BNC Connector has a body length of 0.567", insertion loss of 0.2 dB, and dielectric voltage withstand of 1500VAC. Ideal for RF applications up to 4 GHz, this panel-mount connector features a bayonet coupling type and polypropylene insulator material. With a temperature range from -65°C to 165°C, it offers reliable performance in commercial settings.
M39012/16-0503
Amphenol's M39012/16-0503 BNC Connector features 0.563" body diameter, 0.2 dB insertion loss, and 1.11" body depth. Ideal for RF applications with 50 ohm impedance, it supports RG-142/U and RG-400/U cables, operating up to 4 GHz frequency range.
R142016000
Radiall S A
R142016000 by Radiall S A is a RF BNC connector with 75 ohm impedance and 1.5 GHz operating frequency, featuring 0.2 dB insertion loss and 1.3 VSWR. Ideal for applications requiring MIL and IEC conformity, it has a bayonet coupling type, gold termination finish, PTFE insulator, male contact gender, and plug body style for cable mounting.
5228980-7
TE Connectivity's 5228980-7 BNC Connector features Bayonet coupling, Polypropylene insulator, and 50 ohm impedance. Ideal for RF applications up to 4 GHz, it supports cable types RG 174, RG 316, and RG 188 with a nickel-finished zinc alloy shell.
R142.016.000
Radiall S A's R142.016.000 BNC Connector features 5000000000 ohm Insulation Resistance, 0.2 dB Insertion Loss, and 1500VAC Dielectric Withstanding Voltage. Ideal for RF applications with RG-59 cables, this connector has a characteristic impedance of 75 ohm and operates up to 1.5 GHz frequency.
R141007000
R141007000 by Radiall S A is a BNC Connector with 0.2 dB Insertion Loss, 1.3 VSWR, and 75 ohm Impedance. It is ideal for RF applications up to 1 GHz, featuring Bayonet Coupling and Gold/Nickel Termination for MIL and IEC conformity.
5-225395-6
TE Connectivity's 5-225395-6 BNC Connector features 0.2 dB insertion loss, 1.3 VSWR, and 50 ohm impedance. Ideal for RF applications up to 4 GHz, it is MIL compliant with bayonet coupling and PTFE insulator for reliable performance in cable installations.
31-5329
Amphenol 31-5329 BNC Connector features 0.2 dB Insertion Loss, 2100VAC Dielectric Withstanding Voltage, and 50 ohm Characteristic Impedance. Ideal for RF applications up to 4 GHz with FEMALE contact gender and SOLDER termination in COMMERCIAL settings.
R142.016.000W
R142.016.000W by Radiall S A is a RF BNC connector with 75 ohm impedance, 0.115 dB insertion loss, and 1.5 GHz operating frequency. Ideal for RG-59 cables in commercial applications due to its durability, 500 cycle lifespan, and nickel finish for reliable signal transmission at temperatures ranging from -65 to 165°C.
5414460-1
TE Connectivity's 5414460-1 BNC Connector features gold termination, 50 ohm impedance, and 4 GHz operating frequency. Ideal for RF applications with a temperature range of -55 to 85°C, it offers high durability with 500 cycles.
KC-19-250
Winchester Interconnect
KC-19-250 by Winchester Interconnect is a BNC Connector with Bayonet coupling, suitable for panel mounting. It features RF BNC connector type with crimp termination and female contact gender. Ideal for applications requiring straight mounting on cable and panel setups.
11_BNC-50-2-13/133_NE
Huber+suhner Ag
11_BNC-50-2-13/133_NE by Huber+suhner Ag is a BNC Connector with gold-plated brass contacts, suitable for RG-174/U, RG-188A/U, and RG-316/U cables. It has a characteristic impedance of 50 ohms and operates up to 4 GHz. Ideal for commercial applications requiring reliable RF connections in the temperature range of -65°C to 165°C.
5-1634516-5
TE Connectivity 5-1634516-5 is a BNC Connector with Bayonet coupling, Polyphthalamide insulator, and 75 ohm impedance. Ideal for RF applications up to 2 GHz, featuring female crimp termination and nickel-finished zinc alloy shell for panel mounting. Operating temperature ranges from -55 to 85°C.
112288
Amphenol 112288 is a BNC RF connector with gold finish, bayonet coupling, and brass shell. Ideal for RG-174/U cable termination on panels due to its panel mount feature. Offers reliable commercial-grade performance in various applications requiring coaxial connections.
1274571-1
TE Connectivity's 1274571-1 is a BNC Connector with insulator resistance of 1000000000 ohm, operating temperature range from -40 to 85 °C, and characteristic impedance of 75 ohm. Ideal for RF applications due to its bayonet coupling type, POLYTETRAFLUOROETHYLENE insulator material, and brass shell construction.
2-330002-1
Tyco Electronics Amp
The Tyco Electronics Amp 2-330002-1 is a BNC Connector with Bayonet coupling, PTFE insulator, and 50 ohm impedance. Ideal for RF applications up to 2.5 GHz, it features a VSWR of 1.35 and supports panel or cable mounting with crimp termination for female contacts.
M39012/24-0001
Delta Electronics Manufacturing
RF BNC CONNECTOR; Option: HERMETIC; Contact Gender: FEMALE; Mating Contact Finish: GOLD; Additional Features: STANDARD: MIL-PRF-39012, CAPTIVE CONTACT; Body or Shell Style: RECEPTACLE;
73137-5003
Molex
Molex 73137-5003 RF BNC Connector features 50 ohm impedance, 0.2 dB insertion loss, and 1.3 VSWR for high-frequency applications up to 4 GHz. With a durable zinc alloy shell and polypropylene insulator, it is ideal for board and panel mounting in industrial settings requiring reliable signal transmission. This female coax connector meets UL and CSA standards with a bayonet coupling type for secure connections in harsh environments.
15875
The Amphenol 15875 BNC Connector features a 0.571" body diameter, 0.2 dB insertion loss, and 2100VAC dielectric voltage. Ideal for RF applications up to 4 GHz, this connector has a silver termination finish and PTFE insulator material. With a bayonet coupling type and brass shell material, it offers durability with 500 cycles.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
R141.008.000
R141.008.000 by Radiall S A is a BNC connector with 0.563" body diameter, 5000000000 ohm insulation resistance, and 0.23 dB insertion loss. Ideal for RF applications up to 4 GHz, it features gold over nickel termination contact finish and PTFE insulator material for durability in commercial settings.
R141008000
R141008000 by Radiall S A is a BNC connector with an insertion loss of 0.13 dB and a voltage standing wave ratio of 1.22. It is commonly used in RF applications up to 4 GHz, featuring a bayonet coupling type and a 50 ohm characteristic impedance.
R141009000
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Panel Mount: NO; MIL Conformity: NO; Filter Feature: NO;
R141.009.000
R141.009.000 BNC Connector by Radiall S A is a male plug with a 50 ohm characteristic impedance, suitable for RG-141 cables. It has an insulation resistance of 5GΩ, insertion loss of 0.23 dB, and can withstand voltages up to 1500VAC. This connector is commonly used in RF applications up to 4 GHz.
R141.007.161
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; IEC Conformity: NO; Maximum Operating Frequency: 4 GHz; Additional Features: APPLICABLE CABLES: RG 58; RG 141;
R141007161
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Contact Material: NOT SPECIFIED; Insertion Loss: .13 dB; Insulator Material: POLYTETRAFLUOROETHYLENE;
R141426161
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Body or Shell Style: RECEPTACLE; MIL Conformity: NO;
R141.426.161
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1500VAC; Mounting Style: STRAIGHT;
R141.018.000
R141.018.000 BNC Connector by Radiall S A is a male plug connector with a 50 ohm characteristic impedance and a max operating frequency of 4 GHz. It features a bayonet coupling type, gold termination contact finish with nickel barrier, and is suitable for RF applications requiring low insertion loss (0.23 dB) and high voltage standing wave ratio (1.1).
R141.665.161
R141.665.161 by Radiall S A is a BNC connector with panel mount capability. It has an insertion loss of 0.04 dB and a voltage standing wave ratio of 1.08, making it suitable for RF applications up to 1.5 GHz.
R141018000
Radiall S A's R141018000 BNC Connector features 0.13 dB insertion loss, 1.22 VSWR, and 50 ohm impedance. Ideal for RF applications up to 4 GHz, it has a bayonet coupling type and gold-plated contacts with nickel barrier for reliable signal transmission in cable installations.
R141665161
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Coupling Type: BAYONET; Mounting Type: BOARD; Total No. of Contacts: 1;
R141665161W
R141665161W by Radiall S A is a BNC Connector with Bayonet coupling, Polypropylene insulator, and 50 ohm impedance. Ideal for RF applications up to 1.5 GHz, it features a female contact gender, solder termination, and right-angle mounting on boards. Operating temperatures range from -35°C to 70°C.
R141.007.000
Radiall S A's R141.007.000 BNC Connector features 0.23 dB insertion loss, 1.2 VSWR, and 50 ohm impedance. Ideal for RF applications up to 4 GHz, with gold over nickel termination for male connectors in cable mounting setups.
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Insulator Material: POLYTETRAFLUOROETHYLENE; Mating Contact Finish: NOT SPECIFIED; IEC Conformity: YES;
R141665200
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Body or Shell Style: RECEPTACLE; Coupling Type: BAYONET;
R141.665.200
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Mating Contact Finish: NOT SPECIFIED; Insulation Resistance: 5000000000 ohm; Mounting Type: BOARD;
R141308000
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Termination Contact Finish: Gold (Au) - with Nickel (Ni) barrier; Voltage Standing Wave Ratio: 1.22; Filter Feature: NO;
R141.082.161
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; MIL Conformity: NO; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Mounting Style: STRAIGHT;
R141075000W
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mounting Type: CABLE; Voltage Standing Wave Ratio: 1.22; Characteristic Impedance: 50 ohm;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved