Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
XC95108-10PC84C by Xilinx is a 108 macrocell FLASH PLD with 10 ns propagation delay, operating at 4.75-5.25 V. Ideal for applications requiring in-system programmability and JTAG boundary scan test, it features 69 I/O lines and operates b/w 0-70°C.
Median Price
$23.080
Lifecycle Status
Suppliers In-Stock
11
In-Stock Inventory
1k+
VNN
1+ parts
100+ parts
-
1k+ parts
10k+ parts
Component Electronics Inc.
$17.310
$15.000
Vyrian
Digiode
Vectronix, Inc
Nova Conductors
Bristol Electronics
Inventory MP
Whistler Technology
Specialty Parts & Electronic Components, Inc. (S.P.E.C.)
PC Components Company LLC
AZTECH Wire
$5.175
Semicontronic
$6.000
$5.850
$5.820
Ampacity Inc.
$7.000
One Stop Electronics
$21.000
Corohmni
$23.280
Modulus Dynamics
$38.548
MARBEL Systems
$82.375
$79.080
$76.609
Texas Native Microelectronics
$94.684
$90.897
$88.056
Component Stockers USA
$99.990
Kenton Components
$113.621
$99.986
Microchip USA
$135.948
Lixinc
A-Z Elektronik GmbH
Argo Parts USA
Supply Digital
Continental Prestige Electronics
Aranea Global
Qasali Group International
$245.421
$224.969
Kepictronics
Corphita
Plastic/epoxy material provides durability and protects the internal components of the PLD from external elements, increasing the product's lifespan.
Low propagation delay ensures fast processing and response times, making this PLD suitable for applications requiring quick data processing.
Higher maximum supply voltage allows for flexibility in power supply options and compatibility with a wide range of systems.
Having a larger number of macro cells provides greater flexibility in designing and implementing complex logic functions within the PLD.
CMOS technology offers low power consumption and high noise immunity, making the PLD energy-efficient and reliable in various operating conditions.
In-system programmability allows for easy reconfiguration of the PLD, enabling quick updates and modifications to the logic functions without removing the device from the system.
JTAG boundary scan test capability ensures easy testing and debugging of the PLD, simplifying the verification process during development and production stages.
Programmable Logic Devices (PLD) XC95108-10PC84C attributes and parameters. Explore more Programmable Logic Devices (PLD) devices from Xilinx
Programmable IC Type:
In-System Programmable:
Organization:
Output Function:
No. of Macro Cells:
No. of Dedicated Inputs:
No. of I/O Lines:
Propagation Delay:
Technology:
Sub-Category:
Nominal Supply Voltage:
Minimum Supply Voltage:
Maximum Supply Voltage:
Power Supplies (V):
Maximum Operating Temperature:
Minimum Operating Temperature:
Temprature Grade:
Peak Reflow Temperature:
Moisture Sensitivity Level (MSL):
Maximum Time At Peak Reflow Temperature:
Package Body Material:
Package Style (Meter):
Package Code:
Package Shape:
Package Equivalence Code:
Width:
Length:
Maximum Seated Height:
Terminal Position:
Terminal Form:
No. of Terminals:
Terminal Pitch:
Terminal Finish:
JESD-30 Code:
JESD-609 Code:
JTAG Boundary Scan Test:
Qualified:
XC95108-10PC84C Programmable ICs trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Obsolescence/ EOL - Spartan, XC9500, CoolRunner 26/Oct/2011
Xilinx, Inc. (XIlinx) in February 2022 acquired by AMD
DS18B20U+
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: SQUARE; Housing: PLASTIC; Minimum Supply Voltage: 3 V;
LM358AN
Samsung
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
1N4148WT
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Silicon Standard
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM555CM
Texas Instruments
LM555CM by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V and max operating temperature of 70°C. It comes in a small outline package, suitable for applications requiring pulse generation or rectangular waveform outputs. With surface mount capability and low supply current of 15mA, it is ideal for commercial-grade electronic circuits.
BSS123LT1G
Onsemi
BSS123LT1G by Onsemi is a N-CHANNEL FET with 100V DS breakdown voltage, 0.17A drain current, and 6 ohm on resistance. Ideal for switching applications, it operates in enhancement mode with a max power dissipation of 0.225W. It comes in a small outline package with gull wing terminals and can withstand temperatures from -55 to 150°C.
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
BAV99
Promax-johnton
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
MS3V-T1R32.768KHZ+/-20PPM12.5PF
Golledge Electronics
MS3V-T1R32.768KHZ+/-20PPM12.5PF by Golledge Electronics is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 12.5 pF load capacitance. It is ideal for applications requiring precise timing in temperature-sensitive environments due to its -40 to 85 °C operating range.
Formosa Microsemi
2N7002
North American Philips Discrete Products Div
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Operating Mode: ENHANCEMENT MODE; Maximum Drain Current (ID): .115 A;
2N2222A
Crystalonics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
ESD5Z5.0T1G
ESD5Z5.0T1G by Onsemi is a unidirectional Trans Voltage Suppressor Diode with 5V reverse test voltage and 174W peak power dissipation. It is used for transient suppression in electronic circuits, meeting IEC-61000-4-2, 4-4 standards and UL recognized for reliability.
LM358MX
Fairchild Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
Grande Electronics
Diodes Incorporated
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Terminal Form: GULL WING; JESD-30 Code: R-PDSO-G3;
Semitron
RECTIFIER DIODE; Surface Mount: NO; JESD-609 Code: e0; Maximum Output Current: .15 A; Maximum Operating Temperature: 200 Cel; Maximum Reverse Recovery Time: .004 us;
M39029/58-360
Fct Electronic
CONNECTOR ACCESSORY; IEC Conformity: NO; Alternate Contact Sources: MILITARY; MIL Conformity: YES; Contact Gender: MALE; MIL-Connector Accessory Name: CONTACT;
BSS123NH6327XTSA1
Infineon Technologies
Infineon BSS123NH6327XTSA1 is a N-CHANNEL FET with 100V DS breakdown voltage, 0.19A ID, and 6 ohm RDS(on). Ideal for small outline applications requiring high drain current and low on-resistance. AEC-Q101 compliant for automotive use.
Toshiba
EPM240T100I3
Altera
The EPM240T100I3 by Altera is a programmable logic device with 192 macro cells. It has a propagation delay of 4.7 ns and uses CMOS technology. This surface mount device comes in a QFP package with 100 terminals and is in-system programmable. Its features include JTAG boundary scan test and a peak reflow temperature of 220°C.
SLG46855VTR
Renesas Electronics
SLG46855VTR by Renesas Electronics is a 15-cell OT PLD with 11 inputs/outputs, operating at 2.3-5.5 V and -40 to 85°C. It comes in a rectangular chip carrier package, suitable for applications requiring macrocell output functions in compact designs.
EPM7256SRI208-10N
The EPM7256SRI208-10N by Altera is a programmable logic device with 256 macro cells, a propagation delay of 10 ns, and a maximum clock frequency of 125 MHz. It can be surface mounted and has a package shape of a square. This device is commonly used in industrial applications due to its wide temperature range and JTAG boundary scan test capability.
M4A5-64/32-7VNC
Lattice Semiconductor
M4A5-64/32-7VNC by Lattice Semiconductor is a 64 macrocell EE PLD with 34 inputs, 32 I/O lines, and a clock frequency of 76.9 MHz. It is used in PAL-type architecture for programmable logic applications requiring fast propagation delay of 7.5 ns and operating temperature range from 0 to 70°C.
ATF1508AS-7AX100
Atmel
EE PLD; Grading Of Temperature: COMMERCIAL; Form Of Terminal: GULL WING; No. of Terminals: 100; Package Code: TFQFP; Package Shape: SQUARE;
EPM7160ELC84-15
EE PLD; Grading Of Temperature: COMMERCIAL; Form Of Terminal: J BEND; No. of Terminals: 84; Package Code: QCCJ; Package Shape: SQUARE;
EPM2210F324I5N
The EPM2210F324I5N by Altera is a programmable logic device with 1700 macro cells and a maximum supply voltage of 2.625V. It is used in applications such as flash PLD, featuring a square package shape with a grid array style. The device has a propagation delay of 11.2ns and can operate at 3.3V.
EPM7064STC44-10N
The EPM7064STC44-10N by Altera is a Programmable Logic Device (PLD) with 64 macro cells. It has a maximum clock frequency of 125 MHz and a propagation delay of 10 ns. This PLD is surface mountable and operates at a nominal supply voltage of 5V. It is commonly used for in-system programmable applications.
EPM570F256I5N
FLASH PLD; Form Of Terminal: BALL; No. of Terminals: 256; Package Code: BGA; Package Shape: SQUARE; Nominal Supply Voltage (V): 2.5;
XC9536XL-10VQG64C
Xilinx
XC9536XL-10VQG64C by Xilinx is a programmable logic device with 36 macro cells and 36 inputs/outputs. It operates at a max clock frequency of 138.88 MHz and has a propagation delay of 10 ns. This PLD is commonly used in applications requiring in-system programmability and high-speed data processing.
ATF1504AS-10AU44-T
Microchip Technology
Microchip Technology's ATF1504AS-10AU44-T is a 32 I/O EE PLD with 10 ns propagation delay and 125 MHz clock frequency. Ideal for industrial applications, this PLD features a max supply voltage of 5.5 V and operates in temperatures ranging from -40 to 85 °C.
ATF22V10C-10NM/883
FLASH PLD; Grading Of Temperature: MILITARY; Form Of Terminal: NO LEAD; No. of Terminals: 28; Package Code: QCCN; Package Shape: SQUARE;
XC2C64A-7VQ100I
XC2C64A-7VQ100I by Xilinx is a 64 macrocell FLASH PLD with 7.5 ns propagation delay, operating at up to 200 MHz. Ideal for industrial applications, it features in-system programmability and 64 I/O lines, packaged in a thin profile square shape with gull wing terminals.
EP20K100EQC240-2N
Intel
LOADABLE PLD; Grading Of Temperature: OTHER; Form Of Terminal: GULL WING; No. of Terminals: 240; Package Code: FQFP; Package Shape: SQUARE;
LC4256V-3TN100C
LC4256V-3TN100C by Lattice Semiconductor is a 256 macrocell EE PLD with 74 inputs and 64 I/O lines. It has a propagation delay of 3 ns, operates at a max frequency of 212 MHz, and supports JTAG boundary scan testing. Ideal for applications requiring fast processing speeds and high I/O capabilities in compact designs.
ATF22V10CQZ-20JC
EE PLD; Grading Of Temperature: COMMERCIAL; Form Of Terminal: J BEND; No. of Terminals: 28; Package Code: QCCJ; Package Shape: SQUARE;
ATF16LV8C-10JU
FLASH PLD; Grading Of Temperature: INDUSTRIAL; Form Of Terminal: J BEND; No. of Terminals: 20; Package Code: QCCJ; Package Shape: SQUARE;
ATF22V10C-15PC
Atmel's ATF22V10C-15PC is a 5.25V PLD with 15ns propagation delay, ideal for PAL-type applications. Featuring 132 product terms, 10 dedicated inputs/outputs, and a clock frequency of 55.5MHz, this CMOS device operates b/w 0-70°C in commercial settings.
EPM7128SQC100-7N
EE PLD; Grading Of Temperature: COMMERCIAL; Form Of Terminal: GULL WING; No. of Terminals: 100; Package Code: QFP; Package Shape: RECTANGULAR;
ATF16V8B-15JU
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
XC9572XL-10VQG44C
The Xilinx XC9572XL-10VQG44C is a 3.3V programmable logic device with 72 macro cells and 34 I/O lines. It features a propagation delay of 10ns, operates at a max clock frequency of 100MHz, and supports in-system programmability. Ideal for applications requiring high-speed processing and flexibility in design configurations.
XC95144XL-10TQG144C
XC95144XL-10TQG144C by Xilinx is a 3.3V FLASH PLD with 117 I/O lines, 144 macro cells, and 138.88 MHz clock frequency. Ideal for applications requiring in-system programmability, it features a propagation delay of 10 ns and operates at temperatures from 0 to 70°C.
XC95144XL-10TQG100C
Xilinx XC95144XL-10TQG100C is a 144 macrocell CMOS PLD with 81 I/O lines, 138.88 MHz clock frequency, and 10 ns propagation delay. Ideal for applications requiring in-system programmability, such as flash-based designs needing fast processing speeds and versatile I/O configurations.
XC9536XL-10VQG44C
Xilinx XC9536XL-10VQG44C is a 36 macrocell FLASH PLD with 34 I/O lines, operating at max 138.88 MHz clock frequency and 10 ns propagation delay. Ideal for applications requiring in-system programmability, such as digital signal processing and control systems.
XC9572XL-10TQG100C
XC9572XL-10TQG100C by Xilinx is a programmable logic device with 72 macro cells and CMOS technology. It has a max clock frequency of 100 MHz and can be used for in-system programming, making it suitable for various applications requiring high-speed processing and flexibility.
XC9572XL-10VQG64C
XC9572XL-10VQG64C by Xilinx is a 3.3V FLASH PLD with 72 macro cells, 36 inputs/outputs, and 100 MHz clock frequency. Ideal for applications requiring in-system programmability, it features a propagation delay of 10 ns and operates b/w -40 to +85°C.
XC95144XL-10TQG100I
The Xilinx XC95144XL-10TQG100I is a 144 macrocell FLASH PLD with 81 I/O lines. It operates at a max clock frequency of 138.88 MHz, has propagation delay of 10 ns, and supports JTAG boundary scan test. Ideal for industrial applications requiring high-speed programmable logic devices in compact form factors.
XC9536XL-10VQG44I
Xilinx XC9536XL-10VQG44I is a 36 macrocell FLASH PLD with 34 I/O lines, operating at max 138.88 MHz clock frequency. It features 10 ns propagation delay and supports in-system programmability. Ideal for industrial applications requiring high-speed logic processing within temperature range of -40 to 85°C.
XC9572XL-10VQG44I
Xilinx XC9572XL-10VQG44I is a 3.3V CMOS PLD with 72 macro cells, 34 I/O lines, and 100MHz clock frequency. Ideal for industrial applications, it offers in-system programmability, JTAG boundary scan test support, and propagation delay of 10ns.
XC9572XL-10TQG100I
Xilinx XC9572XL-10TQG100I is a 3.3V CMOS PLD with 72 macro cells, 72 I/O lines, and 100 terminals. It offers a propagation delay of 10ns, operates at up to 100MHz clock frequency, and supports JTAG boundary scan testing. Ideal for industrial applications requiring in-system programmability and high-speed processing within the temperature range of -40°C to 85°C.
XC95288XL-10TQG144C
The Xilinx XC95288XL-10TQG144C is a FLASH PLD with 288 macro cells, 117 I/O lines, and 100 MHz clock frequency. It operates at a max supply voltage of 3.6V and has a propagation delay of 10ns. Ideal for applications requiring programmable logic devices in commercial temperature environments.
XC9572XL-10VQG64I
FLASH PLD; Grading Of Temperature: INDUSTRIAL; Form Of Terminal: GULL WING; No. of Terminals: 64; Package Code: TFQFP; Package Shape: SQUARE;
XC9572XL-10TQ100I
FLASH PLD; Grading Of Temperature: INDUSTRIAL; Form Of Terminal: GULL WING; No. of Terminals: 100; Package Code: LFQFP; Package Shape: SQUARE;
XC95288XL-10TQG144I
XC95288XL-10TQG144I by Xilinx is a PLD with 288 macro cells, 117 inputs/outputs, and 100 MHz clock frequency. Ideal for industrial applications, it features in-system programmability, JTAG boundary scan test support, and operates b/w -40 to 85°C.
XC9572XL-10VQ64I
Xilinx XC9572XL-10VQ64I is a 3.6V PLD with 72 macro cells, 36 inputs/outputs, and 100MHz clock frequency. Ideal for industrial applications, it offers in-system programmability and JTAG boundary scan testing capabilities. With a compact form factor of 10x10mm, this CMOS technology-based device suits projects requiring high-speed processing and flexibility.
XC9572XL-7VQG44C
Xilinx XC9572XL-7VQG44C is a 3.3V CMOS PLD with 72 macro cells, 34 I/O lines, and 125MHz clock frequency. Ideal for applications requiring in-system programmability, such as digital signal processing and telecommunications equipment. Package: PLASTIC/EPOXY, Surface Mount: YES, Propagation Delay: 7.5ns.
XC9536XL-10VQ44C
The Xilinx XC9536XL-10VQ44C is a 36 macrocell FLASH PLD with 34 I/O lines, operating at a max clock frequency of 138.88 MHz. It features a propagation delay of 10 ns and can be used for applications requiring programmable logic devices in commercial-grade environments.
XC9572XL-7VQG44I
The Xilinx XC9572XL-7VQG44I is a 72 macrocell FLASH PLD with 34 I/O lines, operating at up to 125 MHz. It features a propagation delay of 7.5 ns and can be in-system programmable. Ideal for industrial applications requiring high-speed processing and versatile I/O capabilities in a compact form factor.
XC95144XL-10TQG144I
XC95144XL-10TQG144I by Xilinx is a PLD with 117 I/O lines, 144 macro cells, and 138.88 MHz clock frequency. Ideal for industrial applications, it offers in-system programmability and JTAG boundary scan testing capabilities. With a compact form factor of 20x20 mm and low profile design, it operates b/w -40 to 85°C temperatures.
XC9536XL-10VQG64I
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved