Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Wurth Elektronik 885012107011 is an 0805 SMT ceramic capacitor with 22uF capacitance and 10V URdc. It has X5R temperature characteristics, -55 to 85 °C operating range, and wraparound terminals. Ideal for applications requiring compact surface mount capacitors with high capacitance and voltage ratings.
Median Price
$0.422
Lifecycle Status
Suppliers In-Stock
9
In-Stock Inventory
1k+
DigiKey
1+ parts
$0.390
100+ parts
$0.152
1k+ parts
$0.111
10k+ parts
$0.090
Mouser Electronics
$0.410
$0.160
$0.117
$0.104
Newark
$0.433
$0.339
$0.284
-
Bürklin Elektronik
$0.580
$0.474
$0.419
Farnell
$0.406
$0.294
$0.233
Element14
$0.829
$0.691
$0.568
Distrelec
RS (Exports)
$0.532
$0.417
Chip1Stop
$0.147
Argo Parts USA
$0.451
$0.437
Netroflash
$0.442
Continental Prestige Electronics
$0.440
$0.389
Provides high stability and reliability, making it ideal for long-term use.
Allows for easy compatibility with various PCB layouts and designs.
Offers increased capacitance in a compact size, saving space on the board.
Ensures safe transportation and storage of the capacitors.
Standard size for easy replacement and compatibility with other components.
Simplifies installation and reduces chances of wiring errors.
Suitable for automated assembly, improving production efficiency.
Provides secure and reliable connections to the circuit board.
Offers a margin of safety and tolerance for variations in capacitance.
Provides stable capacitance over a wide temperature range.
Allows for use in high-temperature environments without performance degradation.
Known for high reliability, low losses, and long lifespan.
Can operate in extreme cold conditions without impact on performance.
Ensures consistency of capacitance over varying temperatures.
Provides good conductivity and corrosion resistance for long-term performance.
Compact size for dense PCB layouts and space-constrained applications.
Suitable for automated assembly and compact designs.
Provides the required amount of capacitance for optimal circuit performance.
Suitable for low-voltage applications and circuits.
Fixed Capacitors 885012107011 attributes and parameters. Explore more Fixed Capacitors devices from Wurth Elektronik
Capacitance:
Capacitor Type:
Dielectric Material:
Height:
JESD-609 Code:
Length:
Mounting Feature:
Multi-layer:
Negative Tolerance:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Shape:
Package Style (Meter):
Packing Method:
Positive Tolerance:
Rated DC Voltage (URdc):
Size Code:
Temperature Characteristics Code:
Temperature Coef (ppm/Cel):
Terminal Finish:
Terminal Shape:
Width:
885012107011 Capacitors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Würth Elektronik is one of the most successful companies within the Würth Group. The Würth Elektronik Group is the preferred partner of many developers and manufacturers from a wide range of industries. With its electronic and electromechanical components, printed circuit boards, and intelligent power and control systems, Würth Elektronik stands for innovative solutions, top quality, and outstanding service that goes far beyond the ordinary – in line with our motto: “more than you expect!”.
BAV99
Infineon Technologies
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SN6505BDBVR
Texas Instruments
SN6505BDBVR by Texas Instruments is a small outline, low profile interface IC with 6 terminals. It operates b/w -55 to 125°C and supports a max output current of 1.5A at supply voltages ranging from 2.25V to 5.5V. Ideal for military-grade applications requiring compact design and high reliability.
CRG0805F10K
Tyco Electronics Components
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
KSZ9031RNXIC
Microchip Technology
KSZ9031RNXIC by Microchip Technology is a network interface chip with 1 transceiver. It operates at a data rate of 1000 Mbps and has a nominal voltage of 1.2V. This chip is commonly used in industrial applications requiring Ethernet connectivity.
M39029/56-351
Itt Cannon
CONNECTOR ACCESSORY; MIL Conformity: YES; Terminal Type: WIRE; IEC Conformity: NO; Alternate Contact Sources: ITT CANNON; Associated Military - Specifications: MIL-C-38999;
SMBJ18CA
Jgd Semiconductors
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.2 V; Maximum Repetitive Peak Reverse Voltage: 18 V;
Fairchild Semiconductor
Kingwell Technonlogy
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
MMBF170LT1G
Rochester Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Package Style (Meter): SMALL OUTLINE; No. of Terminals: 3;
EEAGA1H4R7
Panasonic
Panasonic EEAGA1H4R7 is a 4.7uF, 50V Aluminum Electrolytic Capacitor with 0.1 Tan Delta and 0.003mA Leakage Current. Ideal for applications requiring high ripple current handling in temperatures ranging from -55 to 105°C.
261
New England Microwave
Other Interface ICs; No. of Terminals: 14; Package Equivalence Code: FL14(UNSPEC); Power Supplies (V): +-5,-15; Package Body Material: PLASTIC/EPOXY; Surface Mount: YES;
NE555D
Philips Semiconductors
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
2N7002
Weitron Technology
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Terminal Finish: TIN LEAD; Maximum Operating Temperature: 150 Cel;
LM107H/883C
General Electric Solid State
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Wideband: NO;
SS14
Rugao Dachang Electronic
RECTIFIER DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 40 V; Maximum Forward Voltage (VF): .55 V; No. of Elements: 1; Technology: SCHOTTKY;
1N4148
NXP Semiconductors
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
ABS10-32.768KHZ-T
Abracon
Abracon's ABS10-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and wearables due to its compact size and low power consumption.
PIC18F4550-I/ML
The Microchip Technology PIC18F4550-I/ML is an 8-bit microcontroller with a max clock frequency of 48 MHz. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it ideal for industrial applications requiring high-speed data processing and analog-to-digital conversion. With low power mode and flash ROM programmability, this chip offers efficient performance in compact designs.
AT90CAN128-16AUR
AT90CAN128-16AUR by Microchip: 16 MHz clock, 8-bit data RAM, and 131072 ROM words. Ideal for industrial applications with CAN, SPI, TWI connectivity and low power mode. Contains 4 timers, 8 ADC channels, and supports up to 10-bit analog to digital conversion.
M39006/25-0248
KYOCERA AVX
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 220 uF; Rated DC Voltage (URdc): 75 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (WET);
C1210C475K8RACTU
KEMET Corporation
The KEMET Corporation C1210C475K8RACTU is a ceramic capacitor with 4.7uF capacitance and 10V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance over a wide temperature range.
940C8W2P2K-F
Cornell Dubilier Electronics
The Cornell Dubilier Electronics 940C8W2P2K-F is a film capacitor with 2.2uF capacitance, rated for 850V DC and 450V AC. It features a ripple current of 18400mA, ESR of 3mohm, and operates b/w -55°C to 105°C. Ideal for applications requiring high voltage tolerance and reliability in through-hole mounting setups.
CC0603KRX7R9BB473
Yageo
Yageo CC0603KRX7R9BB473 is a SMT ceramic capacitor with 0.047uF capacitance, 50V URdc, X7R temp code. Ideal for applications requiring compact design and high reliability in temperature-sensitive environments. Features include 10% neg/pos tolerance, -55 to 125°C operating range, and multi-layer construction.
GRM188C81C106MA73D
Murata Manufacturing
GRM188C81C106MA73D by Murata is a ceramic capacitor with 10uF capacitance and 16V rated DC voltage. With X6S temp characteristics, it operates b/w -55 to 105 °C, making it ideal for SMT applications requiring compact size and high reliability.
GRM21BR61C106KE15L
GRM21BR61C106KE15L by Murata Manufacturing is a ceramic capacitor with a capacitance of 10 uF and a rated DC voltage of 16 V. It has a temperature coefficient of 15% and can operate in temperatures ranging from -55 to 85 °C. This capacitor is commonly used in surface mount applications.
CC0402KRX5R9BB104
Yageo CC0402KRX5R9BB104 is a SMT ceramic capacitor with 0.1uF capacitance, 50V URdc, and X5R temp characteristics. Ideal for surface mount applications in electronics due to its compact size and high temperature range from -55°C to 85°C.
C0603X104K5RACAUTO
C0603X104K5RACAUTO by KEMET Corp is a ceramic capacitor with capacitance of 0.1 uF and rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate b/w -55 to 125 °C. This SMT package is commonly used in automotive applications due to its AEC-Q200 reference standard.
EEEFT1H221AP
Panasonic EEEFT1H221AP is a 220uF aluminum electrolytic capacitor with 50V URdc. It features tan delta of 0.1, leakage current of 0.11mA, and ripple current of 435.5mA, suitable for SMT applications in automotive electronics due to AEC-Q200 compliance.
UWX1E4R7MCL2GB
Nichicon
Nichicon UWX1E4R7MCL2GB is a 4.7uF, 25V aluminum electrolytic capacitor with low tan delta of 0.14 and leakage current of 0.003mA. Ideal for SMT applications, it offers high ripple current capacity of 12mA making it suitable for various electronic devices requiring compact and efficient power storage solutions.
C0603C103K5RACAUTO7411
KEMET Corporation's C0603C103K5RACAUTO7411 is a ceramic capacitor with 10% negative tolerance, X7R temperature characteristics, and 0.01 uF capacitance. Ideal for automotive applications due to AEC-Q200 standard compliance, rated at 50V DC voltage, and compact SMT package style for surface mounting feature.
C1210C107M9PACTU
C1210C107M9PACTU by KEMET is a rectangular ceramic capacitor with a capacitance of 100 uF and rated DC voltage of 6.3 V. It has a temperature coefficient of 15% and can operate b/w -55 to 85 °C. This surface mount capacitor is commonly used in electronic circuits for power supply filtering and decoupling applications.
C1608X5R1H104K080AA
TDK
The TDK C1608X5R1H104K080AA is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X5R temperature characteristics, -55 to 85°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact size and reliable performance.
CGA4J3X7R1C475K125AB
TDK's CGA4J3X7R1C475K125AB is a ceramic capacitor with 4.7uF capacitance, X7R temperature characteristics, and 16V rated DC voltage. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and compact 0805 size.
CL21B105KBFNNNE
Samsung Electro-mechanics
Samsung Electro-mechanics' CL21B105KBFNNNE is a ceramic capacitor with 1uF capacitance and 50V URdc. It features X7R temperature characteristics, -55 to 125 °C operating range, and 10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
EEEFK1V4R7AR
Panasonic EEEFK1V4R7AR is a 4.7uF aluminum electrolytic capacitor with 35V URdc, suitable for AEC-Q200 standards. It features tan delta of 0.12 and leakage current of 0.003mA, ideal for automotive applications due to its compact SMT package and high ripple current capability of 58.5mA.
CKG57NX7S2A226M500JJ
CKG57NX7S2A226M500JJ by TDK is a ceramic capacitor with 22uF capacitance, rated for 100V. With X7S temperature characteristics and -55 to 125°C operating range, it's ideal for automotive applications meeting AEC-Q200 standard. Its compact size of 5x5x6mm and J bend terminals make it suitable for surface mount installations.
GCM21BR71C475KA73L
Murata Manufacturing's GCM21BR71C475KA73L is a ceramic capacitor with 4.7uF capacitance, rated at 16V. It has X7R temperature characteristics and operates b/w -55 to 125 °C. Ideal for automotive applications meeting AEC-Q200 standard.
C0603C103K5RAC
The KEMET C0603C103K5RAC is a ceramic capacitor with 0.01uF capacitance and 50V rated DC voltage. It has a temperature coefficient of 15% and operates b/w -55 to 125°C. Ideal for surface mount applications in various electronic circuits requiring stable capacitance at different temperatures.
0402YC104KAT2A
0402YC104KAT2A by KYOCERA AVX is a SMT ceramic capacitor with capacitance of 0.1uF, rated at 16V. It has X7R temperature characteristics and operates b/w -55 to 125°C. Ideal for applications requiring compact, high-performance capacitors in electronic circuits.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
885012206095R
Wurth Elektronik
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: .1 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
885012205050
CERAMIC CAPACITOR; Dielectric Material: CERAMIC; JESD-609 Code: e3; Terminal Finish: TIN OVER NICKEL; No. of Terminals: 2;
885012205055
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: .0001 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
885012206095
885012206052
Wurth Elektronik 885012206052 is a ceramic capacitor with 1uF capacitance and 16V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications in electronics requiring compact size and stable performance.
885012208094
CERAMIC CAPACITOR; Dielectric Material: CERAMIC; JESD-609 Code: e3; No. of Terminals: 2; Terminal Finish: Tin (Sn) - with Nickel (Ni) barrier;
885012106012
CERAMIC CAPACITOR; Dielectric Material: CERAMIC; No. of Terminals: 2; Terminal Finish: Tin (Sn) - with Nickel (Ni) barrier; JESD-609 Code: e3;
885012106006
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 10 uF; Rated DC Voltage (URdc): 6.3 V; Maximum Operating Temperature: 85 Cel; Dielectric Material: CERAMIC;
885012208038
CERAMIC CAPACITOR; Dielectric Material: CERAMIC; Terminal Finish: TIN OVER NICKEL; No. of Terminals: 2; JESD-609 Code: e3;
885012207103R
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 1 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
885012107006
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 47 uF; Rated DC Voltage (URdc): 6.3 V; Maximum Operating Temperature: 85 Cel; Dielectric Material: CERAMIC;
885012206046
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: .1 uF; Rated DC Voltage (URdc): 16 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
885012107014
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 10 uF; Rated DC Voltage (URdc): 16 V; Maximum Operating Temperature: 85 Cel; Dielectric Material: CERAMIC;
885012206071R
885012206071R by Wurth Elektronik is a 0603 SMT ceramic capacitor with 0.1uF capacitance and 25V URdc. It has X7R temp characteristics, -55 to 125 °C operating range, and 10% tolerance. Ideal for applications requiring compact surface mount fixed capacitors in electronic circuits.
885012206065
CERAMIC CAPACITOR; Dielectric Material: CERAMIC; No. of Terminals: 2;
885012207072
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: .1 uF; Rated DC Voltage (URdc): 25 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
885012205052
CERAMIC CAPACITOR; Dielectric Material: CERAMIC; Terminal Finish: Tin (Sn) - with Nickel (Ni) barrier; JESD-609 Code: e3; No. of Terminals: 2;
885012109011
885012106018
CERAMIC CAPACITOR; Dielectric Material: CERAMIC; No. of Terminals: 2; Terminal Finish: TIN OVER NICKEL; JESD-609 Code: e3;
885012107016
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 2.2 uF; Rated DC Voltage (URdc): 25 V; Maximum Operating Temperature: 85 Cel; Dielectric Material: CERAMIC;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved