Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SMPS TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Terminal Finish: Tin/Silver (Sn/Ag); Maximum Operating Temperature: 125 Cel; Inductance (Primary): 770 uH; Maximum Operating Frequency: 120 KHz;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
SMPS Transformers 750811512 attributes and parameters. Explore more SMPS Transformers devices from Wurth Elektronik
Height:
Maximum Input Voltage (V):
Minimum Input Voltage (V):
JESD-609 Code:
Length:
Mounting Feature:
No. of Winding (Primary):
No. of Winding (Secondary):
Maximum Operating Frequency:
Minimum Operating Frequency:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Voltage-1:
Output Voltage-2:
Packing Method:
Inductance (Primary):
Terminal Finish:
Transformer Type:
Width:
750811512 Transformers trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Würth Elektronik is one of the most successful companies within the Würth Group. The Würth Elektronik Group is the preferred partner of many developers and manufacturers from a wide range of industries. With its electronic and electromechanical components, printed circuit boards, and intelligent power and control systems, Würth Elektronik stands for innovative solutions, top quality, and outstanding service that goes far beyond the ordinary – in line with our motto: “more than you expect!”.
LM317TG
Onsemi
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Minimum Input-Output Voltage Differential: 3 V; Qualification Status: Not Qualified; No. of Functions: 1;
2N7002
Fairchild Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Time At Peak Reflow Temperature (s): 30; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
BAV99WT1G
BAV99WT1G by Onsemi is a series connected diode with 0.006 us reverse recovery time. It is a small outline rectifier diode with 70V peak reverse voltage, ideal for surface mount applications in electronics requiring fast switching and low forward voltage drop.
BSS138
National Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Feedback Capacitance (Crss): 10 pF; JEDEC-95 Code: TO-236AB;
FT232RL-TUBE
FTDI
FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.
CRCW06030000Z0EAHP
Vishay Intertechnology
Vishay Intertechnology's CRCW06030000Z0EAHP is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating temp range -55 to 155 °C, it's SMT package style makes it ideal for automotive applications meeting AEC-Q200 standard.
DP83848IVVX/NOPB
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 48; Package Code: QFP; Package Shape: SQUARE;
IRLML6402TRPBF
Infineon Technologies
IRLML6402TRPBF by Infineon is a P-CHANNEL FET for SWITCHING applications. It features a 20V DS Breakdown Voltage, 22A IDM, and 0.065 ohm RDS(on). With a small outline package and matte tin finish, it operates in temperatures from -55 to 150 °C.
OPA2277UA/2K5
Texas Instruments
OPA2277UA/2K5 by Texas Instruments is a dual operational amplifier with low offset voltage of 100 uV and micropower consumption of 0.004 uA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1 MHz. With a compact rectangular package style, it is suitable for surface mount designs in various electronic systems.
BAV99
Lite-on Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317D2TG
LM317D2TG by Onsemi is an adjustable positive single output standard regulator with a max output current of 1.5A and a max output voltage of 37V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
SMBJ18CA
Diodes Incorporated
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358AN
LM358AN by Texas Instruments is an Operational Amplifier with 2 functions. It has a Max Input Offset Voltage of 5000 uV and Nominal Common Mode Reject Ratio of 85 dB. Widely used in voltage-feedback applications due to its high Min Voltage Gain of 15000 and Unity Gain Bandwidth of 1000 kHz.
LL4148
Continental Device India
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM2931AZ-5.0RAG
LM2931AZ-5.0RAG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V nominal output voltage, 0.1A max output current, and 0.6V max dropout voltage. Ideal for applications requiring stable voltage regulation in temperature-sensitive environments up to 150°C.
DRV5053VAQLPG
Texas Instruments DRV5053VAQLPG is a magnetic field sensor with 2.5-38V supply voltage range, -40 to 125°C operating temperature, and 0-2V output. Ideal for applications requiring Hall effect sensors like automotive, industrial automation, and robotics due to its compact size (1.52" x 4mm) and high output current capability of 2.3A.
2N2222A
Crimson Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM555CM
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
BAV99-7-F
Diodes Inc. BAV99-7-F is a series-connected, center tap diode with 2 elements in a small outline package. It has a max reverse recovery time of 0.004 us and can handle up to 0.3A output current. Ideal for rectification applications requiring fast switching and low reverse current requirements.
SS14
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FA2677-ALD
Coilcraft
Coilcraft FA2677-ALD is a 25W SMPS transformer with primary inductance of 50uH. It has 2 primary windings and 3 secondary windings, suitable for applications requiring output voltage of 3.3V. With dimensions of 30mm x 20.57mm x 11.43mm, it operates b/w -40°C to 125°C temperature range, making it ideal for surface mount power supply designs.
TA7788-ALD
Coilcraft's TA7788-ALD is an AEC-Q200 approved SMPS transformer with primary inductance of 25uH. It has two secondary windings producing output voltages of 15V and 9V, suitable for automotive applications. With a temperature range from -40 to 125°C, it is designed for surface mounting in compact spaces.
750310617
Wuerth Elektronik & Kg
The Wurth Elektronik 750310617 is a SMPS transformer with 1 primary winding and an inductance of 4.5 uH. It has dimensions of L29.08XB23.11XH11.43 (mm) and can operate at temperatures ranging from -40 to 125 °C. This transformer is suitable for applications requiring a min input voltage of 9V and an output voltage of 12V, making it ideal for use in surface mount installations.
78250JC
Murata Manufacturing
Murata Manufacturing's 78250JC is a SMPS Transformer with dimensions of 6.35mm x 9mm x 12.7mm, suitable for surface mount applications. It offers efficient power conversion in compact spaces, making it ideal for various electronic devices requiring high-performance transformers.
HA00-10043BLFTR
Tt Electronics Plc
HA00-10043BLFTR by Tt Electronics Plc is a SMPS transformer with 1 primary winding and an inductance of 51 uH. It has a max operating temperature of 155 °C and an output voltage of 22 V. This transformer is suitable for applications requiring surface mounting and AEC-Q200 approvals.
LPR6235-253PMLC
Coilcraft's LPR6235-253PMLC is a 25uH SMPS transformer with dimensions of 6.0x6.0x3.5mm, suitable for surface mount applications. It operates b/w -40°C to 85°C, featuring silver palladium platinum terminal finish and comes in tape & reel packaging, ideal for power supply designs.
FA2924-ALD
FA2924-ALD by Coilcraft is a 15W SMPS transformer with primary inductance of 40uH. It has 2 secondary windings, output current of 4.5A, and output voltage of 3.3V, suitable for power applications. Operating temperature ranges from -40 to 85°C, with dimensions L17.75xB13.46xH12.32mm for surface mounting method.
78253/55MVC-R
Murata Manufacturing's 78253/55MVC-R is a 1W SMPS Transformer with primary inductance of 600uH. It operates b/w -40 to 85°C, outputs 5V, and has a max frequency of 500KHz. Ideal for surface mount applications in power supplies.
FCT1-33M22SLD
Coilcraft's FCT1-33M22SLD is a 25W SMPS transformer with primary inductance of 95uH. It has two secondary windings, output voltage of 3.3V, and operates b/w -40 to 85°C. Ideal for surface mount applications requiring input voltage range of 33-57V.
PLA51LA32
Vishay Intertechnology's PLA51LA32 is a 2000W SMPS Transformer with primary inductance of 128uH. Ideal for applications requiring output voltage of 30V, it operates b/w -55°C to 125°C. With dimensions of 22x53x70mm, it is designed for chassis mounting and supports frequencies up to 100KHz.
PA0806NL
Pulse Electronics
PA0806NL by Pulse Electronics is a 140W SMPS Transformer with primary inductance of 153uH. It has two windings for both primary and secondary, operating at frequencies from 200KHz to 700KHz. Ideal for surface mount applications in power supplies, it operates b/w -40°C to 125°C temperature range.
782485/35C
Murata Manufacturing's 782485/35C is a SMPS transformer with dimensions of 6.35mm x 9.14mm x 9.77mm for through-hole mounting. Ideal for power supply applications due to its compact size and efficient design, packed in tubes for easy handling and storage.
HA3803-BLD
Coilcraft's HA3803-BLD is a 10W SMPS transformer with primary inductance of 166.5uH, suitable for applications requiring 12V output voltage. With TR packing and dimensions L17.2xB14.98xH8.626 (mm), it operates b/w -40 to 125 °C, ideal for surface mounting in compact electronic devices.
GA3460-BL
Coilcraft GA3460-BL is a SMPS transformer with 4 primary windings, 2.5uH inductance, and max operating temp of 125°C. Ideal for applications requiring 500V output voltage, it has dimensions of L26.75xB26.0xH14.0mm and supports input voltages from 12V to 24V.
PA2398NL
PA2398NL by Pulse Electronics is a SMPS transformer with 2 primary windings, 100uH inductance, and dimensions of L29.21xB21.84xH11.43 mm. It operates b/w -40 to 130 °C and has an output voltage of 12V. Ideal for applications requiring a max input voltage of 72V and operating frequency up to 250 KHz.
74030
Power Integrations
The Power Integrations 74030 is a SMPS transformer with a power rating of 22W. It has one primary winding with an inductance of 750uH and two secondary windings. The transformer is suitable for applications requiring output voltages of 6V and 4.6V, and it can handle input voltages ranging from 90V to 120V.
PL160-104L
Coilcraft PL160-104L is a 160W SMPS transformer with 2 primary windings, inductance of 534uH, and AEC-Q200 approval. Ideal for applications requiring a nominal input voltage of 48V, operating at frequencies b/w 200kHz to 700kHz. Suitable for surface mounting with temperature range from -40°C to 125°C.
POE30P-50LB
Coilcraft's POE30P-50LB is a 3W SMPS transformer with primary inductance of 310000uH. It has two windings for both primary and secondary, outputting 12V and 5V. Ideal for surface mount applications with operating temperatures ranging from -40 to 85°C.
POE26W3.3VS5-R
Eaton Corporation
Eaton Corporation's POE26W3.3VS5-R is a 26W SMPS Transformer with primary inductance of 160uH, output voltage of 3.3V, and operating frequency up to 300KHz. Ideal for surface mount applications requiring compact dimensions and high efficiency power conversion.
78253/55MVC
Murata Manufacturing's 78253/55MVC is a 1W SMPS Transformer with primary inductance of 600uH. It operates b/w -40 to 85°C, outputting 5V at a frequency of up to 500KHz. Ideal for surface mount applications requiring compact dimensions and reliable power conversion.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Wurth Elektronik
Supply Digital Components
1+ parts
$106.00
100+ parts
$54.25
1k+ parts
$11.90
10k+ parts
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved