Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Wurth Elektronik's 749119550 SMPS Transformer has primary inductance of 48uH, secondary winding of 2, and operates b/w -40 to 125 °C. With output voltages at 5V each, it is ideal for surface mount applications requiring input voltage range of 33-57V.
Median Price
$7.390
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
< 1k
Mouser Electronics
1+ parts
100+ parts
$6.900
1k+ parts
$3.850
10k+ parts
-
DigiKey
$6.984
$4.298
ComSIT Distribution GmbH
Higher inductance helps in providing a stable output voltage by reducing fluctuations and noise.
Having multiple secondary windings allows for multiple output voltages, increasing the versatility of the transformer.
With a high maximum operating temperature, this transformer can withstand demanding environmental conditions.
Provides a stable 5V output voltage, suitable for powering various electronic devices.
Provides a stable 15V output voltage, suitable for powering a wide range of electronic devices.
With a low minimum operating temperature, this transformer can function reliably in cold environments.
Compact height makes it suitable for applications where space is limited.
Narrow width allows for easy integration into compact electronic designs.
Can accept a wide range of input voltages, providing flexibility in power supply designs.
Switched mode power supply transformer design offers high efficiency and compact size.
Surface mountable design makes it easy to mount onto PCBs for streamlined manufacturing processes.
Compact length allows for easy placement in tight spaces within electronic devices.
Can handle a high maximum input voltage, providing protection against voltage spikes.
SMPS Transformers 749119550 attributes and parameters. Explore more SMPS Transformers devices from Wurth Elektronik
Additional Features:
Height:
Maximum Input Voltage (V):
Minimum Input Voltage (V):
Length:
Mounting Feature:
No. of Winding (Primary):
No. of Winding (Secondary):
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Voltage-1:
Output Voltage-2:
Inductance (Primary):
Transformer Type:
Width:
749119550 Transformers trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Würth Elektronik is one of the most successful companies within the Würth Group. The Würth Elektronik Group is the preferred partner of many developers and manufacturers from a wide range of industries. With its electronic and electromechanical components, printed circuit boards, and intelligent power and control systems, Würth Elektronik stands for innovative solutions, top quality, and outstanding service that goes far beyond the ordinary – in line with our motto: “more than you expect!”.
INA826AIDGKR
Texas Instruments
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
CRCW080510R0FKEA
Vishay Intertechnology
Vishay Intertechnology's CRCW080510R0FKEA is a fixed resistor with 10 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard and operating voltage of 150 V. Operating temperature range from -55 to 155 °C ensures reliability in various environments.
LL4148
Microsemi
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
OPA2227UA
OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.
MBRS340T3G
Onsemi
MBRS340T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.5V and output current of 4A. It operates b/w -65°C to 150°C, making it suitable for various applications requiring high-speed switching and low power loss in a small outline package. The diode's matte tin terminal finish and dual position make it ideal for surface mount PCB designs.
NE555D
Philips Semiconductors
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Kec
LM358DR2G
LM358DR2G by Onsemi is a dual operational amplifier with 7000uV max input offset voltage and 70dB nominal CMRR. Ideal for applications requiring low bias current such as sensor interfaces, signal conditioning circuits, and audio amplifiers. Package style: Small Outline, Technology: Bipolar, Unity Gain Bandwidth: 1000 kHz.
2N2222A
Baneasa S A
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; Qualification: Not Qualified;
FDN306P
FDN306P by Onsemi is a P-CHANNEL FET with 12V DS Breakdown Voltage, ideal for SWITCHING applications. It features SINGLE configuration with BUILT-IN DIODE and GULL WING terminals. Operating in ENHANCEMENT MODE, it has a max ID of 2.6A and 0.04 ohm RDS(on), suitable for small outline packages at temperatures ranging from -55 to 150°C.
BSS138
Diodes Incorporated
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Minimum DS Breakdown Voltage: 50 V; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
Secos
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .6 A; JEDEC-95 Code: TO-92;
SS14
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
OPA2277UA/2K5
OPA2277UA/2K5 by Texas Instruments is a dual operational amplifier with low offset voltage of 100 uV and micropower consumption of 0.004 uA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1 MHz. With a compact rectangular package style, it is suitable for surface mount designs in various electronic systems.
MBR0520LT1
MBR0520LT1 by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, making it suitable for applications requiring low power consumption in compact electronic devices. This single-configured diode is surface mountable and has a max repetitive peak reverse voltage of 20V, ideal for small outline package designs.
EEAGA1H4R7
Panasonic
Panasonic EEAGA1H4R7 is a 4.7uF, 50V Aluminum Electrolytic Capacitor with 0.1 Tan Delta and 0.003mA Leakage Current. Ideal for applications requiring high ripple current handling in temperatures ranging from -55 to 105°C.
1N4148
Philips Components
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM317AEMP/NOPB
LM317AEMP/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and a max output current of 1.5A. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring precise voltage regulation in a compact package.
SMBJ18CA
Jgd Semiconductors
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.2 V; Maximum Repetitive Peak Reverse Voltage: 18 V;
LM358MX
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
PH0259NL
Pulse Electronics
PH0259NL by Pulse Electronics is a SMPS transformer with primary inductance of 1800 uH. It operates b/w -40 to 125 °C and outputs 24 V. Ideal for applications requiring THROUGH HOLE MOUNTED transformers due to its compact size (18x16x18.3 mm).
FA2636-ALD
Coilcraft
Coilcraft's FA2636-ALD is a SMPS transformer with primary inductance of 160uH. It has 2 secondary windings and operates b/w -40°C to 85°C. With output voltage of 5V, it is ideal for surface mount applications in power supplies and converters.
PA1836NL
PA1836NL by Pulse Electronics is a SMPS transformer with 2 primary windings, inductance of 4.5uH, and dimensions L29.21xB21.84xH11.43 mm. It operates b/w -40 to 125°C, outputs 5V at max frequency of 200KHz, suitable for surface mount applications in power supplies with input voltage range of 9-36V.
FL2015-5LB
Coilcraft FL2015-5LB is a 6W SMPS transformer with primary inductance of 20uH. Operating at -40 to 85°C, it outputs 1600V at max input voltage of 12V. Ideal for surface mount applications up to 100 KHz frequency.
PL300-100L
Coilcraft's PL300-100L is a 300W SMPS transformer with 2 primary windings and an inductance of 287uH. It operates b/w -40 to 125°C, suitable for AEC-Q200 applications. With dimensions of L29.46xB26.67xH10.4mm, it is designed for surface mounting in high-frequency circuits up to 700KHz.
750311715
Wuerth Elektronik & Kg
The Wurth Elektronik 750311715 is a SMPS transformer with 2 primary windings and an inductance of 280 uH. It has 3 secondary windings, with output voltages of 15 V each. This surface mount transformer is suitable for applications requiring a min input voltage of 60V and a max input voltage of 600V.
CTX02-14659
Cooper Industries
SMPS TRANSFORMER; Mounting Feature: SURFACE MOUNT; Dimensions: L10.0XB12.0XH6.2 (mm); Inductance (Primary): 547 uH; No. of Winding (Secondary): 2; No. of Winding (Primary): 1;
JA4456-DLD
Coilcraft's JA4456-DLD is a 25W SMPS Transformer with primary inductance of 70uH. It has 2 primary windings and 3 secondary windings, operating b/w -40°C to 125°C. Ideal for surface mount applications in power supplies with input voltage range of 36V to 57V.
CTX02-15835
SMPS TRANSFORMER; Mounting Feature: SURFACE MOUNT; Manufacturer Series: CTX02-15835; Width: 14.4 mm; Dimensions: L14.1XB14.4XH10.6 (mm); No. of Winding (Primary): 2;
PL160-104L
Coilcraft PL160-104L is a 160W SMPS transformer with 2 primary windings, inductance of 534uH, and AEC-Q200 approval. Ideal for applications requiring a nominal input voltage of 48V, operating at frequencies b/w 200kHz to 700kHz. Suitable for surface mounting with temperature range from -40°C to 125°C.
7491196212
7491196212 by Wuerth Elektronik & Kg is a SMPS transformer with an inductance of 128 uH. It has two secondary windings and can operate at temperatures ranging from -40 to 125 °C. This transformer is suitable for applications requiring a 12 V output voltage.
760390013
Wurth Elektronik 760390013 is an AEC-Q200 approved SMPS Transformer with primary inductance of 475uH. Operating b/w -40 to 125 °C, it outputs 5V at a frequency range of 250-550 KHz. Ideal for surface mount applications in electronics requiring a compact transformer design.
760871135
Wurth Elektronik 760871135 SMPS Transformer with inductance of 1250 uH, operating temperature range -40 to 125 °C, and output voltages of 12V. Ideal for surface mount applications requiring compact dimensions and input voltage range of 85-265V.
PA5130.003NLT
PA5130.003NLT by Pulse Electronics is a 25W SMPS transformer with 2 primary windings and an inductance of 80uH. It has a max operating temperature of 125°C and is suitable for applications requiring a min input voltage of 33V, such as power supplies and converters.
POE300F-12LD
Coilcraft's POE300F-12LD is a 30W SMPS transformer with 3 primary windings at 42uH. It operates b/w -40°C to 125°C, outputting 12V. Ideal for surface mount applications in power over Ethernet systems with input voltage range of 36V to 72V.
PH0812CNL
PH0812CNL by Pulse Electronics is a 160W SMPS Transformer with primary inductance of 183uH. It has 3 primary windings and 2 secondary windings, suitable for applications requiring a power rating up to 160W. With a compact size of 24.65mm x 21.59mm x 10.1mm, it is ideal for surface mounting in high-frequency circuits operating b/w -40°C to 125°C.
FA2900-ALD
FA2900-ALD by Coilcraft is a 25W SMPS transformer with primary inductance of 50uH. It features 2 primary windings and 3 secondary windings, suitable for applications requiring a max operating temperature of 125°C. With dimensions of L30.0xB20.57xH11.43 mm, it is designed for surface mounting in power supplies with an output voltage of 12V.
WA8515-ALD
Coilcraft's WA8515-ALD is a 25W SMPS transformer with 2 primary windings at 90uH. It operates b/w -40°C to 85°C, suitable for applications requiring a 5V output voltage and up to 57V input voltage. Ideal for surface mounting in power supply designs up to 250 KHz frequency.
DCT15EFD-U44S003
TDK
DCT15EFD-U44S003 by TDK is a SMPS transformer with primary inductance of 10uH. It features dimensions of 8.5mm x 16.5mm x 22.5mm, suitable for surface mount applications. Ideal for power supply designs requiring compact and efficient transformers.
PA6582-AL
Coilcraft's PA6582-AL is a 30W SMPS transformer with 2 primary windings, 9uH inductance, and output voltage of 54V. Ideal for surface mount applications, it operates b/w -40°C to 85°C and supports input voltages from 6V to 32V.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Wurth Elektronik
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved