Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SMPS TRANSFORMER; Mounting Feature: SURFACE MOUNT; Output Voltage-1: 24 V; Minimum Operating Temperature: -40 Cel; Maximum Operating Temperature: 125 Cel; Additional Features: LENGTH AND HEIGHT DIMENSION INCLUDE TERMINAL ALSO;
Median Price
$9.060
Lifecycle Status
Suppliers In-Stock
1
In-Stock Inventory
< 1k
Newark
1+ parts
100+ parts
$7.860
1k+ parts
$6.640
10k+ parts
$5.370
SMPS Transformers 7491195224 attributes and parameters. Explore more SMPS Transformers devices from Wurth Elektronik
Additional Features:
Height:
Maximum Input Voltage (V):
Minimum Input Voltage (V):
Length:
Mounting Feature:
No. of Winding (Primary):
No. of Winding (Secondary):
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Voltage-1:
Output Voltage-2:
Inductance (Primary):
Transformer Type:
Width:
7491195224 Transformers trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Würth Elektronik is one of the most successful companies within the Würth Group. The Würth Elektronik Group is the preferred partner of many developers and manufacturers from a wide range of industries. With its electronic and electromechanical components, printed circuit boards, and intelligent power and control systems, Würth Elektronik stands for innovative solutions, top quality, and outstanding service that goes far beyond the ordinary – in line with our motto: “more than you expect!”.
2N2222A
Taitron Components
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; No. of Terminals: 3;
LM358M
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
SMBJ18CA
Forward International Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Nominal Breakdown Voltage: 21.05 V; Maximum Clamping Voltage: 29.2 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
CRCW06031K00FKEAHP
Vishay Intertechnology
Vishay Intertechnology's CRCW06031K00FKEAHP is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.33 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance and operating voltage of 75 V.
LM107H
Advanced Micro Devices
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Maximum Bias Current (IIB) @25C: .075 uA;
Fagor Electronica S Coop
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM7805CT
Onsemi
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
ECA2DHG4R7
Panasonic
ECA2DHG4R7 by Panasonic is a 4.7uF aluminum electrolytic capacitor with 200V rated DC voltage. It features tan delta of 0.15, leakage current of 0.0664mA, and ripple current of 50mA, making it ideal for applications requiring high capacitance stability and low leakage in through-hole mounting setups at temperatures ranging from -25 to 105°C.
LM358MX
M24308/2-1F
Souriau-sunbank Connection Technologies
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body Length: 1.228 inch; Mounting Type: CABLE AND PANEL; Termination Type: CRIMP;
NE555D
Philips Semiconductors
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
MBR0530T1G
MBR0530T1G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.375V and output current of 0.5A. It operates b/w -65°C to 125°C, making it suitable for applications requiring high-speed switching in compact electronic devices like smartphones and tablets. The package style is small outline with gull wing terminals for surface mount assembly.
FDLL4148
FDLL4148 by Onsemi is a single rectifier diode with a max reverse recovery time of 0.004 us. With a max forward voltage of 1V and output current of 0.2A, it is ideal for applications requiring fast switching speeds in electronic circuits. The diode's glass package body material and isolated case connection make it suitable for surface mount designs operating at temperatures up to 175°C.
FDD5614P
FDD5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 45A IDM and 0.1 ohm RDS(ON), operating in ENHANCEMENT MODE at up to 175°C. The PLASTIC/EPOXY package with GULL WING terminals ensures efficient heat dissipation and reliable performance.
2N7002
Changzhou Galaxy Century Microelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Minimum DS Breakdown Voltage: 60 V; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; No. of Terminals: 3;
M39029/56351
Souriau
CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Gender: FEMALE; Insertion Tools: M81969/14-10; Tool Settings: M22520/2-10; DIN Conformity: NO;
87832-1420
Molex
87832-1420 by Molex is a 14-contact board connector with 0.079" pitch, suitable for commercial applications. It features matte tin over nickel finish, glass-filled polyamide insulator, and polarization key for easy assembly. Withstanding voltage of 1400VAC and operating temperature range from -55 to 105°C make it reliable for various electronic devices.
1N4148WS
General Instrument
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MBRM140T1G
MBRM140T1G by Onsemi is a Schottky rectifier diode with 40V max repetitive peak reverse voltage, 1A max output current, and 0.3V max forward voltage. It is used in applications requiring small outline surface mount diodes for efficient power management.
2N7002-T1-E3
Vishay Intertechnology's 2N7002-T1-E3 is a N-CHANNEL FET for SWITCHING applications. Features include 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. With ENHANCEMENT MODE operation, this GULL WING transistor is ideal for small outline surface mount designs up to 150°C.
PA2047NL
Pulse Electronics
PA2047NL by Pulse Electronics is a SMPS transformer with 2 primary windings and an inductance of 7.2 uH. It has a max operating temperature of 130°C and output voltages of 5V and 3.3V. This transformer is suitable for surface mount applications in power supply systems with input voltages ranging from 9V to 36V.
750032052
Wuerth Elektronik & Kg
750032052 by Wurth Elektronik is a SMPS Transformer with primary inductance of 10uH. Its compact dimensions of 28.7mm x 21.97mm x 11.43mm make it suitable for surface mount applications in various electronic devices requiring efficient power conversion.
HA00-10043BLFTR
Tt Electronics Plc
HA00-10043BLFTR by Tt Electronics Plc is a SMPS transformer with 1 primary winding and an inductance of 51 uH. It has a max operating temperature of 155 °C and an output voltage of 22 V. This transformer is suitable for applications requiring surface mounting and AEC-Q200 approvals.
PH0814CNL
PH0814CNL by Pulse Electronics is a 160W SMPS Transformer with 3 primary windings and inductance of 275uH. It operates b/w -40 to 125°C, suitable for high-frequency applications (200-700 KHz) requiring surface mounting. With dimensions of 24.65x21.59x10.1mm, it's ideal for compact power supply designs.
VGT15SEFD-250S4A7
TDK
VGT15SEFD-250S4A7 by TDK is an AEC-Q200 approved SMPS transformer with 2 primary windings at 2.6uH inductance and 4 secondary windings. Operating b/w -40°C to 130°C, it's a surface mount type transformer measuring 23mm x 15.4mm x 12mm, ideal for automotive and industrial applications.
PH9185.011NLT
PH9185.011NLT by Pulse Electronics is a 3W SMPS Transformer with primary inductance of 750uH. It operates b/w -40 to 125°C, suitable for surface mount applications. With dimensions of 12.5x10x13mm, it's ideal for compact power supply designs.
750316033
Wurth Elektronik 750316033 is a SMPS transformer with inductance of 370uH. It has approvals from AEC-Q200, CSA, EN, IEC, UL and operates b/w -40 to 125°C. Ideal for applications requiring output voltage of 3.3V and min input voltage of 4.5V in compact dimensions of L12.32xB10.41xH11.43mm for surface mounting method.
750310617
The Wurth Elektronik 750310617 is a SMPS transformer with 1 primary winding and an inductance of 4.5 uH. It has dimensions of L29.08XB23.11XH11.43 (mm) and can operate at temperatures ranging from -40 to 125 °C. This transformer is suitable for applications requiring a min input voltage of 9V and an output voltage of 12V, making it ideal for use in surface mount installations.
PA5131.004NLT
PA5131.004NLT by Pulse Electronics is a 35W SMPS Transformer with primary inductance of 13uH, operating at -40 to 130°C. It has two windings for both primary and secondary outputs of 3.3V, suitable for surface mount applications in power supplies up to 200KHz frequency.
PL160-104L
Coilcraft
Coilcraft PL160-104L is a 160W SMPS transformer with 2 primary windings, inductance of 534uH, and AEC-Q200 approval. Ideal for applications requiring a nominal input voltage of 48V, operating at frequencies b/w 200kHz to 700kHz. Suitable for surface mounting with temperature range from -40°C to 125°C.
POE51Q-12ED
Coilcraft's POE51Q-12ED is a 51W SMPS transformer with 22.2uH primary inductance, AEC-Q200 approval, and 2 secondary windings. Ideal for automotive applications, it operates b/w -40°C to 125°C, with output voltage of 12V.
PH0801CNLT
PH0801CNLT by Pulse Electronics is a 160W SMPS Transformer with 3 primary windings and inductance of 153uH. Ideal for applications requiring a transformer with surface mounting feature, operating at frequencies ranging from 200KHz to 700KHz. Operating temperatures range from -40°C to 125°C.
PA5100.006NLT
PA5100.006NLT by Pulse Electronics is a 27W SMPS Transformer with 2 primary windings at 11uH inductance. It operates b/w -40 to 125°C, outputs 12V, and supports up to 200KHz frequency. Ideal for surface mount applications requiring a compact transformer solution.
PA1836NL
PA1836NL by Pulse Electronics is a SMPS transformer with 2 primary windings, inductance of 4.5uH, and dimensions L29.21xB21.84xH11.43 mm. It operates b/w -40 to 125°C, outputs 5V at max frequency of 200KHz, suitable for surface mount applications in power supplies with input voltage range of 9-36V.
750313970
750313970 by Wurth Elektronik is a SMPS Transformer with inductance of 40uH. It has approvals from IEC and operates b/w -40 to 125°C. With output voltages of 3.3V, it is ideal for applications requiring a min input voltage of 18V and operating frequency range of 200-300 KHz.
ZA9672-BED
ZA9672-BED by Coilcraft is a 12W SMPS Transformer with primary inductance of 7uH, operating at -40 to 85°C. It has 2 windings for both primary and secondary, outputting 12V at max frequency of 300KHz. Ideal for surface mount applications requiring AEC-Q200 approval.
749196111
Wurth Elektronik 749196111 is a SMPS transformer with 3 primary windings, inductance of 27.4uH, and dimensions L12.9xB9.2xH6.2 (mm). It operates b/w -40 to 125°C, has TIN SILVER COPPER terminal finish, and is surface mountable. Ideal for power supply applications requiring compact and efficient transformers.
FCT1-33M22SLD
Coilcraft's FCT1-33M22SLD is a 25W SMPS transformer with primary inductance of 95uH. It has two secondary windings, output voltage of 3.3V, and operates b/w -40 to 85°C. Ideal for surface mount applications requiring input voltage range of 33-57V.
CTX02-15835
Cooper Industries
SMPS TRANSFORMER; Mounting Feature: SURFACE MOUNT; Manufacturer Series: CTX02-15835; Width: 14.4 mm; Dimensions: L14.1XB14.4XH10.6 (mm); No. of Winding (Primary): 2;
POE30P-50LB
Coilcraft's POE30P-50LB is a 3W SMPS transformer with primary inductance of 310000uH. It has two windings for both primary and secondary, outputting 12V and 5V. Ideal for surface mount applications with operating temperatures ranging from -40 to 85°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Wurth Elektronik
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved