Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Wurth Elektronik 742792640 is a multi-layer data line filter with FERRITE CHIP construction. It operates b/w -55 to 125 °C, has a DC resistance of 0.35 ohm, and output impedance of 300 OHM. Ideal for surface mount applications in electronics to filter frequencies from 100 MHz to 250 MHz.
Median Price
$0.150
Lifecycle Status
Suppliers In-Stock
15
In-Stock Inventory
1k+
Distrelec
1+ parts
$0.098
100+ parts
-
1k+ parts
$0.087
10k+ parts
Bürklin Elektronik
$0.138
$0.123
$0.117
Mouser Electronics
$0.119
$0.096
Farnell
$0.160
$0.126
Element14
$0.232
$0.200
$0.184
$0.181
DigiKey
Newark
$0.161
$0.149
$0.139
Greenchips
$0.104
$0.099
$0.095
$0.085
Nova Conductors
Bristol Electronics
Vyrian
SIE Connect GmbH - GreenChips
LIBRA Elektronik GmbH
VNN
Bas Electronics GmbH & Co. KG
XScomponents
$0.010
Semicontronic
$0.083
$0.081
Bastille Electronics
$0.120
$0.114
$0.112
Continental Prestige Electronics
Argo Parts USA
$0.122
Advanced Electronics
$0.129
Aztec Data Supply Inc.
$2.340
Corohmni
$3.212
Perfect Parts
The multi-layer construction provides better filtering capabilities and ensures effective noise suppression.
The compact 0603 case size makes it suitable for use in small electronic devices where space is limited.
Ferrite chip filters are known for their high attenuation of high frequency noise, making this product ideal for applications requiring noise reduction.
With a high maximum operating temperature, this filter can withstand demanding environmental conditions.
The low minimum operating temperature ensures the filter can perform effectively even in extremely cold conditions.
The terminal finish with nickel barrier provides excellent conductivity and corrosion resistance, ensuring long-term reliability.
The narrow width of 0.8mm enables easy integration into circuit designs with limited space.
Capable of filtering out noise at frequencies as low as 100 MHz, making it suitable for a wide range of applications.
The low DC resistance minimizes power loss and ensures efficient filtering performance.
Compact length of 1.6mm allows for space-saving installation on circuit boards.
Effective filtering up to 250 MHz makes this filter versatile for different frequency ranges.
The output impedance of 300 ohms indicates compatibility with various electronic devices and circuits.
Convenient tape and reel packaging makes handling and installation of the filters easier in high-volume production.
Surface mount installation allows for quick and secure attachment to PCBs, saving assembly time.
The compact dimensions make this filter suitable for compact electronic devices and PCB layouts.
With a rated current of 0.3 A, this filter can handle moderate power loads in various applications.
Low profile height of 0.8mm allows for slim and compact design integration.
Ferrite material provides high magnetic permeability and excellent noise suppression capabilities, making it an ideal choice for filtering applications.
Data Line Filters 742792640 attributes and parameters. Explore more Data Line Filters devices from Wurth Elektronik
Case Code:
Construction:
Maximum DC Resistance:
Filter Type:
Maximum Frequency:
Minimum Frequency:
Height:
JESD-609 Code:
Length:
Material:
Mounting Type:
No. of Functions:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Impedance (ohm):
Packing Method:
Dimensions:
Rated Current:
Sub-Category:
Terminal Finish:
Width (mm):
742792640 Filters trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
Würth Elektronik is one of the most successful companies within the Würth Group. The Würth Elektronik Group is the preferred partner of many developers and manufacturers from a wide range of industries. With its electronic and electromechanical components, printed circuit boards, and intelligent power and control systems, Würth Elektronik stands for innovative solutions, top quality, and outstanding service that goes far beyond the ordinary – in line with our motto: “more than you expect!”.
1N4148WT
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FDC5614P
MSKSEMI SEMICONDUCTOR
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2 W; Transistor Element Material: SILICON; Minimum DS Breakdown Voltage: 60 V;
BSS138
Sipex
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Moisture Sensitivity Level (MSL): 1; Peak Reflow Temperature (C): 240;
FDN5618P
Onsemi
FDN5618P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage. It features a single configuration with built-in diode, suitable for switching applications. With 10A IDM and 0.17 ohm RDS(on), it operates in the temperature range of -55 to 150 °C, making it ideal for various electronic devices.
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
BAV99
Gec Plessey Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
ATMEGA328P-AU
Microchip Technology
ATMEGA328P-AU by Microchip: 8-bit RISC CPU, 20 MHz clock, 23 I/O lines. Ideal for industrial applications with SPI, TWI, USART connectivity and low power mode. Features include 2048 RAM bytes, 1024 EEPROM size, and 16384 ROM words.
SS14
Changzhou Starsea Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Cheng-yi Electronic
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LL4148
Secos
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
ERJ3EKF1002V
Panasonic
Panasonic's ERJ3EKF1002V is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance.
National Semiconductor
Shanghai Lunsure Electronic Technology
EEAGA1H4R7
Panasonic EEAGA1H4R7 is a 4.7uF, 50V Aluminum Electrolytic Capacitor with 0.1 Tan Delta and 0.003mA Leakage Current. Ideal for applications requiring high ripple current handling in temperatures ranging from -55 to 105°C.
2N7002
Philips Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Moisture Sensitivity Level (MSL): 1; Maximum Operating Temperature: 150 Cel;
ERJ2RKF1002X
Panasonic's ERJ2RKF1002X is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and operating temperature range of -55 to 155 °C.
Weitron Technology
ULN2803A
YOUTAI SEMICONDUCTOR CO LTD
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 18; Package Code: SOP; Package Shape: RECTANGULAR; JESD-30 Code: R-PDSO-G18;
STM32H753IIT6
STMicroelectronics
STM32H753IIT6 by STMicroelectronics is a 32-bit microcontroller with 176 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs and 2-Ch 12-Bit DACs, suitable for industrial applications requiring high-speed data processing and connectivity via CAN, ETHERNET, USB, and more.
LM358AN
Samsung
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
MMZ2012R301ATD25
TDK
MMZ2012R301ATD25 by TDK is a chip bead data line filter with AEC-Q200 screening. Featuring FERRITE CHIP technology, it has 2 terminals and operates b/w -55 to 125 °C. With dimensions of L2.0xB1.25xH0.85 (mm), it's ideal for automotive electronics and industrial applications due to its 300 OHM output impedance and 0.6A rated current capacity.
74279206
Wuerth Elektronik & Kg
Wurth Elektronik 74279206 is a multi-layer FERRITE CHIP filter with 2 terminals, suitable for data line applications. It has a max operating temperature of 125°C and min frequency of 100 MHz. With dimensions of L2.0XB1.2XH0.9 (mm), it offers an output impedance of 30 OHM and rated current of 3 A, making it ideal for surface mount installations in electronic circuits.
FBMH3225HM202NT
Taiyo Yuden
Taiyo Yuden's FBMH3225HM202NT is a chip bead data line filter with 2 terminals, ideal for suppressing noise in circuits. Featuring a ferrite chip construction, it offers a max operating temperature of 85°C and DC resistance of 0.13 ohm. With dimensions of L3.2xB2.5xH2.5 mm, this surface mount filter is suitable for applications requiring impedance control at frequencies up to 100 MHz.
744232222
Wurth Elektronik 744232222 is a Data Line Filter with 2 functions, rated at 50V. It has 4 terminals and operates b/w -40 to 125°C. With dimensions of L3.2xB1.6xH1.9 (mm), it offers an output impedance of 2200Ω and max DC resistance of 1.2Ω, suitable for surface mount applications in various electronic devices.
HI2220R301R-10
Laird Technologies
HI2220R301R-10 by Laird Technologies is a chip bead data line filter with 2 terminals, operating b/w -40 to 125 °C. With dimensions of L5.59XB5.08XH3.45 mm, it offers a frequency range from 25 MHz to 1000 MHz and an output impedance of 300 ohm. Ideal for surface mount applications, it has a max DC resistance of 0.02 ohm and can handle up to 5 A current rating.
MMZ1608R102ATA00
TDK MMZ1608R102ATA00 is a 0603 chip bead filter with 2 terminals. It offers max operating temp of 125°C and min of -55°C, with width of 0.8mm and length of 1.6mm. Ideal for data line filtering applications due to its ferrite construction, output impedance of 1000Ω, and rated current of 0.4A.
DLW31SN222SQ2L
Murata Manufacturing
Murata Manufacturing's DLW31SN222SQ2L is a Data Line Filter with 2 functions, rated at 50V. It offers a max DC resistance of 1.2 ohm and an output impedance of 2200 ohm. This surface mount filter operates b/w -40 to 85 °C and is ideal for applications requiring high insulation resistance.
744212331
Wurth Elektronik 744212331 is a UL-approved data line filter with 2 functions, rated at 80V. With inductance of 330uH and max DC resistance of 0.3 ohm, it operates b/w -40 to 105 °C. Ideal for surface mount applications, dimensions are L6.5xB3.6xH1.65 mm, suitable for filtering data lines with an output impedance of 2000 OHM.
MPZ1608S600ATAH0
TDK's MPZ1608S600ATAH0 is a 0603 chip bead data line filter with FERRITE CHIP technology. It offers a max operating temperature of 125°C, DC resistance of 0.02 ohm, and output impedance of 60 OHM. Ideal for applications requiring noise suppression in circuits up to 100 MHz frequency range.
BLM18AG102SN1
Murata Manufacturing's BLM18AG102SN1 is a FERRITE CHIP filter with 2 terminals, rated for 0.4A current and 1000Ω output impedance. Operating b/w -55°C to 125°C, it has dimensions of L1.6xB0.8xH0.8 (mm) and is ideal for data line filtering in surface mount applications.
BLM18HE152SN1J
Murata Manufacturing's BLM18HE152SN1J is a chip bead data line filter with 2 terminals, operating b/w -55 to 125 °C. With dimensions of 1.6x0.8x0.8 mm, it offers a frequency range from 100 MHz to 1000 MHz and an output impedance of 1500 ohm. Ideal for surface mount applications in electronic devices requiring noise suppression on data lines.
ACM4520V-142-2P-T00
ACM4520V-142-2P-T00 by TDK is a data line filter with 2 functions, rated voltage of 50V, and max operating temp of 125°C. Ideal for applications requiring high output impedance and insulation resistance in compact surface mount design.
FLT007A0-SRZ
Ge Power Electronics
DATA LINE FILTER MODULE; Rated Current: 7 A; Approvals (V): UL; CSA; VDE; Packing Method: BAG; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 85 Cel;
BK1608HS601-TV
BK1608HS601-TV by Taiyo Yuden is a FERRITE CHIP Data Line Filter with 2 terminals. It has a max operating temperature of 125°C and min of -55°C. With dimensions of L1.6xB0.8xH0.8 (mm), it's ideal for applications requiring an output impedance of 600 ohm, rated current of 0.35A, and surface mounting type.
742792093
Wurth Elektronik 742792093 is a multi-layer FERRITE CHIP filter with 2 terminals, suitable for data line applications. It operates b/w -55 to 125 °C and has a DC resistance of 0.6 ohm. With dimensions of L2.0XB1.2XH0.9 (mm), it offers an output impedance of 2200 OHM at frequencies ranging from 80-100 MHz.
FBMJ3216HM600-T
Taiyo Yuden's FBMJ3216HM600-T is a chip bead data line filter with 2 terminals, rated for 4A current. Featuring ferrite chip construction, it offers 60 ohm output impedance and operates b/w -40 to 85°C. Ideal for surface mount applications in filtering frequencies up to 100 MHz.
ILHB1206ER601V
Vishay Dale
FERRITE CHIP; Maximum DC Resistance: .1 ohm; Rated Current: 2.5 A; Approvals (V): IEC; Width (mm): 1.6; Output Impedance (ohm): 600 OHM;
MPZ1608S601A
TDK's MPZ1608S601A is a FERRITE CHIP filter with 2 terminals, rated for 1A current. It offers low DC resistance of 0.15 ohm and output impedance of 600 ohm. Ideal for data line filtering in applications requiring compact surface mount components.
BLM15HD182SN1D
Murata Manufacturing's BLM15HD182SN1D is a chip bead data line filter with 2 terminals, rated for 0.2A current. With dimensions of L1.0xB0.5xH0.5 (mm), it operates b/w -55 to 125°C and offers an output impedance of 1800 ohm. Ideal for surface mount applications, this ferrite chip filter has a frequency range from 100MHz to 1000MHz.
MMZ1608S102ATA00
The TDK MMZ1608S102ATA00 is a chip bead data line filter with 2 terminals, FERRITE CHIP construction, and 0.5 ohm max DC resistance. It operates b/w -55 to 125 °C and has an output impedance of 1000 OHM. Ideal for surface mount applications in electronics for noise suppression and signal filtering.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
742792040
Wurth Elektronik
Wurth Elektronik 742792040 is a multi-layer data line filter with FERRITE CHIP construction. It has 2 terminals, operates b/w -55 to 125 °C, and offers a DC resistance of 0.15 ohm. Ideal for applications requiring noise suppression in circuits operating at frequencies ranging from 100 MHz to 150 MHz.
742792651
Wurth Elektronik 742792651 is a surface mount data line filter with AEC-Q200 screening. Featuring multi-layer construction, it has 2 terminals and FERRITE BEAD filter type. With dimensions of L1.6xB0.8xH0.8 mm, it operates b/w -55 to 125°C and offers an output impedance of 600 ohm for applications requiring noise suppression in automotive electronics.
742792031
Wurth Elektronik 742792031 is a FERRITE CHIP filter with 2 terminals, rated for 3A current. With dimensions of L2.0XB1.25XH0.9 (mm), it operates b/w -55 to 125 °C and has an output impedance of 300 OHM. Ideal for data line filtering applications due to its surface mount construction and frequency range of 100-200 MHz.
742792662
Wurth Elektronik 742792662 is a FERRITE CHIP data line filter with max operating temp of 125°C and min of -55°C. It has a width of 0.8mm, length of 1.6mm, and height of 0.8mm. With an output impedance of 1000Ω, it's ideal for surface mount applications in electronics to reduce electromagnetic interference.
742792641
Wurth Elektronik 742792641 is a multi-layer ferrite chip filter with AEC-Q200 approval. It operates b/w -55 to 125 °C, has 2 terminals, and offers an output impedance of 300 ohm. Ideal for data line filtering applications in automotive electronics due to its compact size (1.6x0.8x0.8 mm) and high frequency range (100-250 MHz).
742792141
Wurth Elektronik 742792141 is a multi-layer data line filter with FERRITE CHIP construction. Operating b/w -55 to 125 °C, it offers 90-100 MHz frequency range and 1 A rated current. Ideal for surface mount applications, providing 1000 OHM output impedance for noise suppression in electronic circuits.
742792664
Wurth Elektronik 742792664 is a multi-layer FERRITE CHIP filter with 2 terminals, suitable for data line applications. With dimensions of 1.6x0.8x0.8 mm and operating temperatures from -55 to 125 °C, it offers a max frequency of 120 MHz and DC resistance of 0.6 ohm, making it ideal for surface mount installations in high-frequency circuits.
742792097
Wuerth Elektronik & Kg 742792097 is an AEC-Q200 rated FERRITE CHIP filter with 2 terminals, suitable for data line applications. With dimensions of L2.0XB1.2XH0.9 (mm), it operates b/w -55 to 125 °C and has a DC resistance of 0.3 ohm at a frequency range of 70-100 MHz. Ideal for surface mounting, it offers an output impedance of 1500 OHM and can handle a rated current of 1 A efficiently.
74279266
Wurth Elektronik 74279266 is a AEC-Q200 compliant data line filter with multi-layer construction. Featuring FERRITE CHIP technology, it operates b/w -55 to 125 °C and has a DC resistance of 0.6 ohm. With dimensions of L1.6XB0.8XH0.8 (mm), it is ideal for surface mount applications in automotive electronics requiring high impedance filtering up to 140 MHz.
742792663
Wurth Elektronik 742792663 is a 0603 multi-layer FERRITE CHIP filter with dimensions L1.6XB0.8XH0.8 (mm). It operates b/w -55 to 125 °C, has a max frequency of 150 MHz, and DC resistance of 0.85 ohm. Ideal for data line filtering applications due to its surface mount design and output impedance of 1000 OHM.
742792116
Wuerth Elektronik & Kg 742792116 is a FERRITE CHIP filter with 2 terminals, rated for 2.5A current and output impedance of 500 ohm. Ideal for data line filtering applications, it operates b/w -55 to 125 °C, with dimensions L3.2xB1.6xH1.1 mm and surface mounting type.
742792022
Wurth Elektronik 742792022 is a multi-layer FERRITE CHIP filter with 2 terminals, suitable for data line applications. With dimensions of L2.0XB1.2XH0.9 (mm), it has a max operating temperature of 125 °C and output impedance of 220 OHM at a frequency range from 100 MHz to 300 MHz. Ideal for surface mounting type, it offers low DC resistance (0.05 ohm) and rated current of 2 A in TAPE AND REEL packing method.
742792023
Wurth Elektronik 742792023 is a multi-layer FERRITE CHIP filter with 2 terminals, suitable for data line applications. It has a width of 1.2mm, length of 2mm, and height of 0.9mm. With an output impedance of 120 ohm, it operates b/w -55 to 125 °C and supports frequencies from 100 MHz to 250 MHz.
7427927311
FERRITE CHIP; Maximum DC Resistance: .09 ohm; Rated Current: 1.2 A; Maximum Operating Temperature: 125 Cel; Length: 1 mm; Minimum Operating Temperature: -55 Cel;
74279226101
Wurth Elektronik 74279226101 is a chip bead data line filter with FERRITE CHIP construction. It operates b/w -55 to 125 °C, has 2 terminals, and measures L4.5XB3.2XH2.3 (mm). With a max frequency of 1100 MHz and output impedance of 100 OHM, it's ideal for surface mount applications in electronics requiring noise suppression at frequencies up to 100 MHz.
74279218
Wurth Elektronik 74279218 is a multi-layer FERRITE CHIP filter with dimensions L3.2XB1.6XH1.1 (mm). It has a max operating temperature of 125°C and min frequency of 90 MHz, suitable for data line filtering applications in surface mount configurations.
742792602
Wurth Elektronik 742792602 is a multi-layer FERRITE CHIP filter with 2 terminals, suitable for data line applications. It operates b/w -55 to 125 °C, with dimensions of L1.6xB0.8xH0.8 mm and output impedance of 60 ohm at frequencies ranging from 100 MHz to 600 MHz.
742792653
FERRITE CHIP; Construction: Multi-Layer; Maximum DC Resistance: .65 ohm; Maximum Frequency: 200 MHz; Material: Ferrite; Rated Current: .5 A;
742792625
Wurth Elektronik 742792625 is a FERRITE CHIP Data Line Filter with 2 terminals, rated for 2A current. It has dimensions of L1.6xB0.8xH0.8 mm and operates b/w -55°C to 125°C. Ideal for surface mount applications requiring output impedance of 120 ohm.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved