Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
ARRAY/NETWORK RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 100000 ohm; Rated Power Dissipation (P): .1 W; Maximum Operating Temperature: 155 Cel; Tolerance: .5 %;
Median Price
-
Lifecycle Status
Suppliers In-Stock
1
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Resistor Networks & Arrays PRA100I2-100KDBNTF attributes and parameters. Explore more Resistor Networks & Arrays devices from Vishay Intertechnology
Additional Features:
Construction:
Element Power Dissipation:
First Element Resistance:
JESD-609 Code:
Mounting Type:
Network Type:
No. of Elements:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Height (Package):
Length (Package):
Package Style (Meter):
Width (Package):
Packing Method:
Rated Power Dissipation (P):
Rated Temperature:
Resistance:
Resistor Type:
Second or Last Element Resistance:
Size Code:
Technology:
Temperature Coef (ppm/Cel):
Temperature Coef Tracking:
Terminal Finish:
Terminal Shape:
Tolerance:
Operating Voltage:
PRA100I2-100KDBNTF Resistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8533.21.00.20
SB
8533.21.00.25
Vishay Intertechnology, Inc. is a renowned American manufacturer of discrete semiconductors and passive electronic components that have been used in many consumer products and industrial applications worldwide. Founded by Polish-born businessman Felix Zandman in 1962, Vishay has grown to become one of the world's largest manufacturers of these components, with a strong presence in every major market around the globe. The company also offers value-added solutions such as its patented passive components, replacing a number of legacy parts with more reliable, cost effective solutions.
Executive Chairman of the Board, Chief Business Development Officer
Marc Zandman
Chief Executive Officer, President, and Director
Joel Smejkal
Executive Vice President and Chief Financial Officer
Lori Lipcaman
Itzehoe - Fab Phase 1
Fabrication
Fab Initiation
2025
Germany
Itzehoe
Wafer Capacity
US - Fab 3
1986
USA
Santa Clara
24,500
US - Fab 2
1972
8,000
Austria
1984
Vöcklabruck
25,000
Taiwan
1967
Hsintien
12,000
Italy - Fab 8
1961
Canada
Torino
15,000
Israel
2000
Yokneam Illit
400
SS14
Rugao Dachang Electronic
RECTIFIER DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 40 V; Maximum Forward Voltage (VF): .55 V; No. of Elements: 1; Technology: SCHOTTKY;
ULN2803A
Onsemi
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
E8WSDC12-32.768KTR
Abracon
Abracon's E8WSDC12-32.768KTR crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and communication systems.
DS18B20+
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Package Shape or Style: RECTANGULAR; Maximum Operating Current: 1.5 mA; Package Equivalence Code: SIP3,.1,50;
LL4148
Temic Semiconductors
RECTIFIER DIODE; Terminal Position: END; Terminal Form: NO LEAD; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1N4148WT
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M24308/2-1F
Souriau
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Body or Shell Style: RECEPTACLE; MIL Conformity: YES;
NC7WZ17P6X
The Onsemi NC7WZ17P6X is a logic gate with 2 functions, featuring a propagation delay of 13.1 ns at 1.8V supply voltage. Ideal for industrial applications, it operates b/w -40 to 85°C and has a max power supply current of 100mA. With Schmitt Trigger technology and small outline packaging, it suits compact electronic designs requiring fast signal processing.
BSS138-TP
Micro Commercial Components
BSS138-TP by Micro Commercial Components is a N-channel small signal FET with a min DS breakdown voltage of 50V and max drain current of 0.22A. It is commonly used in applications requiring enhancement mode operation, such as power management and switching circuits.
2N2222A
Dionics-usa
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM7805CT
Silicon Group
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Package Body Material: PLASTIC/EPOXY; Maximum Load Regulation: .05 %;
DS18B20U+
Analog Devices
DS18B20U+ by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
BSS138W-7-F
Diodes Incorporated
Diodes Inc.'s BSS138W-7-F is a N-channel FET with 50V DS breakdown voltage, ideal for switching applications. It features single configuration with built-in diode, Gull Wing terminals, and operates in enhancement mode. With 0.2A max drain current and 3.5 ohm RDS(on), it's UL recognized and suitable for small outline packages at temperatures ranging from -55 to 150°C.
1N4148WT-7
1N4148WT-7 by Diodes Inc. is a fast recovery rectifier diode with a max reverse recovery time of 0.004 us and a max forward voltage of 1.25 V. It has a package style of small outline, making it suitable for surface mount applications where high-speed switching is required at temperatures ranging from -65 to 150 °C.
SMBJ18CA
Jgd Semiconductors
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.2 V; Maximum Repetitive Peak Reverse Voltage: 18 V;
1N4148WT by Onsemi is a single rectifier diode with a max output current of 0.3A and forward voltage of 0.72V. It has a small outline package style, matte tin terminal finish, and operates at temperatures up to 150°C. Ideal for applications requiring fast reverse recovery time such as power supplies and signal demodulation circuits.
Surge Components
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
STM32H743ZIT6
STMicroelectronics
STM32H743ZIT6 by STMicroelectronics is a 32-bit microcontroller with integrated cache and a max supply voltage of 3.6V. It is commonly used in industrial applications, offering features such as 21 timers, CAN and USB connectivity, and low power mode.
C0603X104K5RACAUTO
KEMET Corporation
C0603X104K5RACAUTO by KEMET Corp is a ceramic capacitor with capacitance of 0.1 uF and rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate b/w -55 to 125 °C. This SMT package is commonly used in automotive applications due to its AEC-Q200 reference standard.
LT5400BIMS8E-3#PBF
LT5400BIMS8E-3#PBF by Analog Devices is a 4-function isolated resistor array with 0.8W power dissipation, 1 ppm/°C temperature coef tracking, and -40 to 85 °C operating range. Ideal for precision applications requiring high resistance values and low temperature coefficient.
BCN164ABI1823F7
Tt Electronics Plc
BCN164ABI1823F7 by Tt Electronics Plc is a SMT resistor array with 4 functions, 182000 ohm resistance, and 0.063 W power dissipation. Ideal for applications requiring isolated network types in compact electronic devices due to its small package size and surface mounting type.
RM2012A103/603PBVW10
Thin Film Technology
RM2012A103/603PBVW10 by Thin Film Technology is a 0.1W resistor array with two elements, 10000 ohm and 60000 ohm resistance. It has a tolerance of 0.1% and temperature coefficient tracking of 5 ppm/°C. Ideal for surface mount applications requiring precise resistance values in compact designs.
752091103G
Cts
The Cts 752091103G is a resistor network with 8 elements and a power dissipation of 0.12W. It has a rated temperature of 25°C and can operate at temperatures ranging from -55°C to 125°C. This surface mount device is commonly used in electronic circuits for its high resistance and low power consumption.
LT5400BIMS8E-4#PBF
LT5400BIMS8E-4#PBF by Analog Devices is a 4-function isolated resistor network with 0.8W power dissipation. Featuring 1 ppm/°C temperature coef tracking, it has a resistance of 1000 ohm and operates b/w -40 to 85 °C. Ideal for precision applications requiring high accuracy in temperature-varying environments.
CN2A4TTE471J
Koa Speer Electronics
CN2A4TTE471J by Koa Speer Electronics is a resistor network with 4 functions, each with a resistance of 470 ohm and a power dissipation of 0.1 W. It operates b/w -55 to 155 °C and has an operating voltage of 100 V. This SMT package is ideal for applications requiring isolated resistor networks in compact spaces.
TC164-FR-073K3L
Yageo
The Yageo TC164-FR-073K3L is a rectangular resistor network with 4 functions and a resistance of 3300 ohm. It operates at temperatures ranging from -55 to 155 °C and is commonly used in surface mount applications.
EXB2HV470JV
Panasonic
The Panasonic EXB2HV470JV is a resistor network with 8 functions, each with 47 ohm resistance. It has a power dissipation of 0.063W and operates b/w -55 to 125 °C. Ideal for surface mount applications requiring isolated networks with a tolerance of 5%.
766165191APTR13
The Cts 766165191APTR13 is a resistor network with a power dissipation of 0.12W and a resistance of 194 ohm. It is used in applications requiring surface mount mounting type and has a max operating temperature of 125 °C.
YC164-JR-0768KL
YC164-JR-0768KL by Yageo is a 4-function resistor network with resistance of 68000 ohm, operating voltage of 50V, and tolerance of 5%. It is used in AEC-Q200 standard applications for surface mounting type with a max operating temperature of 155°C.
Y1747V0019QT0R
Vishay Intertechnology
Vishay Intertechnology's Y1747V0019QT0R is a DIP resistor network with 5000 ohm resistance, 0.02% tolerance, and 0.2 ppm/°C temperature coefficient. Ideal for applications requiring precise resistance values in a compact package, such as precision instrumentation and medical devices.
RM2012B103/103PBVW10
RM2012B103/103PBVW10 by Thin Film Technology is a 0.1W resistor array with two 10000 ohm elements, each having a tolerance of 0.1%. It features thin film technology and offers temperature coefficient tracking of 5 ppm/°C, making it ideal for surface mount applications requiring precise resistance values.
TC164-FR-07470RL
Yageo's TC164-FR-07470RL resistor network features 470 ohm resistance, 1% tolerance, and 155°C max operating temp. Ideal for automotive applications due to AEC-Q200 compliance and surface mount package style. With 4 functions in a compact 0612 size code, it suits various electronic designs.
EXB38V100JV
Panasonic EXB38V100JV is a 10 ohm resistor array with 4 functions, rated for 70-125 °C. METAL GLAZE/THICK FILM tech in SMT package makes it ideal for automotive applications due to AEC-Q200 standard compliance and 50 V operating voltage.
LT5400BIMS8E-1#PBF
Linear Technology
ARRAY/NETWORK RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Maximum Operating Temperature: 85 Cel; No. of Functions: 4; Network Type: Isolated;
GUS-QSCBLF-01-2701-J
GUS-QSCBLF-01-2701-J by Tt Electronics Plc is a 23-element resistor array with 2700 ohm resistance, 5% tolerance, and 1W power dissipation. It operates b/w -55 to 125 °C and has a temperature coefficient of 5 ppm/°C. Ideal for surface mount applications requiring precise resistance values in compact spaces.
Y0094V0010AA0L
Vishay Foil Resistors
ARRAY/NETWORK RESISTOR; Resistance: 20000 ohm; Rated Power Dissipation (P): .2 W; Maximum Operating Temperature: 125 Cel; Tolerance: .05 %; Spacing (Lead): 2.54 mm;
Y5076V0314QV0L
Vishay Precision Group
Vishay Precision Group's Y5076V0314QV0L resistor network features 2 elements with 0.02% tolerance, METAL FOIL tech, and 3 terminals. Ideal for precision applications requiring high temp stability, such as industrial sensors or medical devices. With a temperature coef of 0.1 ppm/°C and operating voltage of 200 V, it ensures accurate performance in extreme conditions.
RM2012A-103/503-PBVW10
Susumu
The Susumu RM2012A-103/503-PBVW10 is a thin film resistor array with 0.05 W power dissipation, 10000 ohm first element resistance, and 50000 ohm second element resistance. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard compliance and high temperature coefficient tracking of 5 ppm/°C.
RM2012B-103/203-PBVW10
The Susumu RM2012B-103/203-PBVW10 is a thin film resistor array with 2 functions, 10000 ohm and 20000 ohm resistances. It has a tolerance of 0.1%, operates b/w -55 to 155 °C, and features temperature coefficient tracking of 5 ppm/°C. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved