Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Vishay Intertechnology's MPMT10019001AT1 is a thin film resistor array with 0.1W power dissipation, 70°C rated temperature, and 2 ppm/°C temperature coefficient tracking. Ideal for divider applications in electronics, it features a SOT-23 package style, surface mounting type, and operates at voltages up to 100V.
Median Price
$5.331
Lifecycle Status
Suppliers In-Stock
13
In-Stock Inventory
1k+
Arrow
1+ parts
$3.272
100+ parts
-
1k+ parts
10k+ parts
Element14
$4.940
$3.259
Farnell
$3.502
$3.074
Verical
$5.748
$3.045
$2.495
$2.309
Chip1Stop
$6.050
Newark
$6.470
$3.220
$2.710
$2.660
Mouser Electronics
$6.830
$3.310
$2.840
New Yorker Electronics
$2.130
$1.965
DigiKey
$2.522
$2.301
Nova Conductors
$3.578
Vyrian
NAC Semi
$3.360
IBS Electronics
$3.010
Corohmni
$0.154
Aztec Data Supply Inc.
$0.422
Argo Parts USA
$2.360
Advanced Electronics
$2.415
$2.295
Netroflash
$3.506
Continental Prestige Electronics
$3.730
$2.500
Semicontronic
$3.940
$3.842
$3.822
Perfect Parts
GreenTree Electronics
This resistor network has a low power dissipation rating, making it suitable for applications where energy efficiency is important.
With a rated temperature of 70°C, this resistor network can operate efficiently in moderate temperature environments.
Utilizing thin film technology, this product offers high precision and stability in resistor values.
The rectangular package design makes this resistor network easy to integrate into circuit boards, saving space.
With two elements in the network, this product provides flexibility in circuit design and configuration options.
The rectangular construction ensures uniformity and consistency in performance across the network.
This resistor network is packed using Tape and Reel method, which simplifies the manufacturing and assembly process.
The 1206 size code indicates the physical dimensions of the resistor network, making it compatible with standard mounting options.
As a divider network, this product is ideal for voltage division applications and signal processing tasks.
With three terminals, this resistor network offers additional connectivity options for complex circuit configurations.
The low temperature coefficient tracking ensures stable and accurate resistance values over a wide temperature range.
The SOT-23 package style offers compact size and efficient heat dissipation for this resistor network.
The gull wing terminal shape provides secure and reliable connections in surface mount applications.
This resistor network can withstand high temperatures up to 150°C, expanding its usability in various environments.
The first element resistance of 1000 ohms provides precise control over resistance values in the network.
With a minimum operating temperature of -55°C, this product is suitable for use in cold environments.
The temperature coefficient of 25 ppm/°C ensures minimal resistance variation with temperature changes.
The tin terminal finish offers corrosion resistance and solderability for reliable connections in the network.
The second or last element resistance of 9000 ohms complements the first element, providing a wide range of resistance values.
With a low profile height of 1.02mm, this resistor network is suitable for space-constrained applications.
As an array/network resistor, this product combines multiple resistors in a single package for enhanced performance and convenience.
With an operating voltage of 100 volts, this resistor network can handle moderate voltage levels in circuits.
The tight tolerance of 0.1% ensures accurate and consistent resistance values for precision applications.
The 3.05mm package length provides compatibility with standard mounting configurations for easy integration.
The surface mounting type offers quick and efficient assembly of this resistor network on circuit boards.
With a rated power dissipation of 0.2 watts, this product can handle higher power loads for robust performance.
The 1.4mm package width ensures compatibility with standard mounting layouts and efficient use of space on circuit boards.
Resistor Networks & Arrays MPMT10019001AT1 attributes and parameters. Explore more Resistor Networks & Arrays devices from Vishay Intertechnology
Construction:
Element Power Dissipation:
First Element Resistance:
JESD-609 Code:
Mounting Type:
Network Type:
No. of Elements:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Height (Package):
Length (Package):
Shape (Package):
Package Style (Meter):
Width (Package):
Packing Method:
Rated Power Dissipation (P):
Rated Temperature:
Resistor Type:
Second or Last Element Resistance:
Size Code:
Sub-Category:
Technology:
Temperature Coef (ppm/Cel):
Temperature Coef Tracking:
Terminal Finish:
Terminal Shape:
Tolerance:
Operating Voltage:
MPMT10019001AT1 Resistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8533.21.00.20
SB
8533.21.00.25
Vishay Intertechnology, Inc. is a renowned American manufacturer of discrete semiconductors and passive electronic components that have been used in many consumer products and industrial applications worldwide. Founded by Polish-born businessman Felix Zandman in 1962, Vishay has grown to become one of the world's largest manufacturers of these components, with a strong presence in every major market around the globe. The company also offers value-added solutions such as its patented passive components, replacing a number of legacy parts with more reliable, cost effective solutions.
Executive Chairman of the Board, Chief Business Development Officer
Marc Zandman
Chief Executive Officer, President, and Director
Joel Smejkal
Executive Vice President and Chief Financial Officer
Lori Lipcaman
Itzehoe - Fab Phase 1
Fabrication
Fab Initiation
2025
Germany
Itzehoe
Wafer Capacity
US - Fab 3
1986
USA
Santa Clara
24,500
US - Fab 2
1972
8,000
Austria
1984
Vöcklabruck
25,000
Taiwan
1967
Hsintien
12,000
Italy - Fab 8
1961
Canada
Torino
15,000
Israel
2000
Yokneam Illit
400
1N4148
Itt Components
RECTIFIER DIODE; Surface Mount: NO; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Output Current: .15 A;
2N2222A
Solid State Devices
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM107H
Intersil
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Nominal Common Mode Reject Ratio: 96 dB;
BAV99
Onsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
M39029/56351
Souriau
CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Gender: FEMALE; Insertion Tools: M81969/14-10; Tool Settings: M22520/2-10; DIN Conformity: NO;
CDSOT23-SM712
Bourns
Bourns CDSOT23-SM712 is a bidirectional Transient Voltage Suppressor diode with 400W peak power dissipation and 20uA reverse current. Ideal for surge protection in applications requiring a max clamping voltage of 14V, such as IEC-61000-4-2 compliant systems. Operates b/w -55°C to 150°C with matte tin finish and Gull Wing terminals.
ULN2803A
Motorola
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Terminal Position: DUAL; JESD-30 Code: R-PDIP-T18;
2N7002
Micro Commercial Components
Small Signal Field-Effect Transistors; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Transistor Application: SWITCHING; Maximum Drain Current (ID): .34 A; Package Style (Meter): SMALL OUTLINE;
LL4148
Taitron Components
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
DS18B20Z
Maxim Integrated
DS18B20Z by Maxim Integrated is a 12-bit digital temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Suitable for applications requiring precise temperature monitoring in compact spaces.
BSS123-7-F
Diodes Incorporated
BSS123-7-F by Diodes Inc. is a N-channel FET with 100V DS breakdown voltage and 0.17A drain current. Ideal for switching applications, it features a single configuration with built-in diode, operates in enhancement mode, and has a max power dissipation of 0.3W.
LM7805CT
Comset Semiconductors
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Operating Temperature (TJ-Min): 0 Cel; Technology: BIPOLAR;
ERJ2RKF1002X
Panasonic
Panasonic's ERJ2RKF1002X is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and operating temperature range of -55 to 155 °C.
Panjit International
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM358N
Harris Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
FDD5614P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 42 W; Terminal Position: SINGLE; Terminal Form: GULL WING;
Tak Cheong Electronics Holdings
USB2514BI-AEZG
Standard Microsystems
BUS CONTROLLER, UNIVERSAL SERIAL BUS; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 36; Package Code: HVQCCN; Package Shape: SQUARE;
First Components International
TC164-JR-0710KL
Yageo
Yageo's TC164-JR-0710KL resistor network features 4 functions with 10000 ohm resistance, 5% tolerance, and 155°C max operating temp. Ideal for AEC-Q200 compliant applications requiring a compact SMT package with isolated network type and surface mounting.
4608X-102-473LF
Bourns 4608X-102-473LF resistor network features 4 functions with 47000 ohm resistance, 2% tolerance, and 0.3 W power dissipation. Ideal for applications requiring isolated networks in through-hole mounting with a temperature range of -55 to 125 °C.
TC164-JR-07220RL
Yageo's TC164-JR-07220RL is a 4-function resistor array with 220 ohm resistance, 5% tolerance, and 50V operating voltage. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance and -55 to 155 °C temperature range. Features metal glaze/thick film tech in a compact SMT package.
CAY16-1000F4LF
Bourns CAY16-1000F4LF is a 100 ohm resistor network with 1% tolerance, 0.0625 W power dissipation, and 70°C rated temperature. Ideal for surface mount applications in electronics requiring isolated networks with 4 functions.
770103272P
Cts
Cts 770103272P resistor network has 5 functions with 2700 ohm resistance, rated for 25-125 °C. Technology: CERMET, Package: SIP, suitable for applications requiring isolated networks with 2% tolerance and 50V operating voltage.
752161221GPTR13
The Cts 752161221GPTR13 resistor network has a power dissipation of 1.4W, resistance of 220 ohm, and operating voltage of 25V. It is used in applications requiring surface mount technology for bus-based networks with a tolerance of 2%.
ACASN1002S1002P1AT
Vishay Intertechnology
Vishay Intertechnology's ACASN1002S1002P1AT is a thin film resistor array with 0.1W power dissipation, 10k ohm resistance, and 0.1% tolerance. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and isolated network type.
742C083333JP
742C083333JP by Cts is a resistor network with a power dissipation of 0.063 W and a resistance of 33000 ohm. It is commonly used in surface mount applications for its compact size (3.2mm x 1.6mm) and high operating temperature range (-55 to 125 °C).
4606X-102-203LF
Bourns 4606X-102-203LF resistor network features 20000 ohm resistance, 0.3 W power dissipation, and 2.54 mm lead spacing. Ideal for applications requiring a high level of precision in temperature-sensitive environments such as automotive electronics and industrial control systems.
ACASA1001S2001P1AT
ARRAY/NETWORK RESISTOR; Terminal Finish: TIN OVER NICKEL; JESD-609 Code: e3; Manufacturer Series: ACAS0612AT;
L071S472LF
Tt Electronics Plc
L071S472LF by Tt Electronics Plc is a resistor network with 6 elements, each having a resistance of 4700 ohm. It has a power dissipation of 0.125 W and operates within a temperature range of -55 to 125 °C. This rectangular package resistor is ideal for applications requiring precise resistance values in bussed network configurations.
MNR04M0APJ330
ROHM
ROHM's MNR04M0APJ330 resistor network features 4 functions with 33 ohm resistance, 5% tolerance, and 0.063 W power dissipation. Ideal for surface mount applications in electronics requiring isolated networks with a temperature range of -55 to 155 °C.
PFC-D1206LF-03-1002-1002-BA
Tt Electronics Plc's PFC-D1206LF-03-1002-1002-BA is a 0.125W resistor array with two 10k ohm elements, 0.1% tolerance, and 100V operating voltage. It is a surface mount device suitable for divider network applications with an operating temperature range of -65 to 150°C.
CAY10-330J4LF
Bourns CAY10-330J4LF resistor network features 4 functions with 33 ohm resistance, 5% tolerance, and 0.25 W power dissipation. Ideal for surface mount applications in electronics requiring isolated networks with operating voltage up to 25 V. With a temperature coefficient of 200 ppm/°C, it can operate b/w -55 °C to 125 °C efficiently.
RM2012A103/903PBVW10
Thin Film Technology
RM2012A103/903PBVW10 by Thin Film Technology is a 0.1W resistor array with two elements: 10kΩ and 90kΩ, offering 0.1% tolerance and 5ppm/°C temperature coef tracking. Ideal for surface mount applications requiring precise resistance values in compact designs.
ACASA5002S5002P100
Vishay Intertechnology's ACASA5002S5002P100 is a thin film resistor array with 4 functions, each with 50k ohm resistance. It has a power dissipation of 0.1W and operates b/w -55°C to 125°C. Ideal for applications requiring isolated network resistors in surface mount configurations at up to 75V voltage and 0.1% tolerance.
YC122-JR-0722RL
YC122-JR-0722RL by Yageo is a 22 ohm resistor network with 4 terminals, rated for 70 to 155 °C. It features METAL GLAZE/THICK FILM tech and is ideal for SMT applications in automotive electronics due to AEC-Q200 compliance and 50 V operating voltage.
CAT16-223J4LF
CAT16-223J4LF by Bourns is a resistor network with 4 functions, 22000 ohm resistance, and 0.0625 W power dissipation. Ideal for surface mount applications in electronics requiring isolated networks with 5% tolerance and operating voltage of 50 V.
RM2012B-103/303-PBVW10
Susumu
The Susumu RM2012B-103/303-PBVW10 is a thin film resistor array with 2 functions, 10000 ohm and 30000 ohm resistances. It has a tolerance of 0.1%, rated power dissipation of 0.1 W, and operates b/w -55 to 155 °C. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance.
RM2012A103/203PBVW10
RM2012A103/203PBVW10 by Thin Film Technology is a resistor network with 2 elements, 10000 ohm and 20000 ohm resistance. It has 0.1% tolerance, 0.05 W power dissipation, and 5 ppm/°C temperature coef tracking. Ideal for surface mount applications requiring precise resistance values in compact spaces.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
MPMT2002ATS
Vishay Intertechnology's MPMT2002ATS is a thin film resistor network with 0.1W power dissipation and 70°C rated temperature. Ideal for divider applications, it features two elements with 10k ohm resistance each, tracking at 2 ppm/°C. With a compact SOT-23 package, it operates b/w -55 to 150°C and tolerates up to 100V voltage.
MPMT2001AT1
Vishay Intertechnology's MPMT2001AT1 is a thin film resistor array with 2 elements, each at 1000 ohm. It has a power dissipation of 0.1W and tolerance of 0.1%. Ideal for divider networks, it operates b/w -55 to 150 °C with a tracking coefficient of 2 ppm/°C.
MPMT50011002AT5
ARRAY/NETWORK RESISTOR; Mounting Type: SURFACE MOUNT; Rated Power Dissipation (P): .2 W; Maximum Operating Temperature: 150 Cel; Tolerance: .1 %; No. of Functions: 1;
MPMT2002AT1
ARRAY/NETWORK RESISTOR; Mounting Type: SURFACE MOUNT; Rated Power Dissipation (P): .2 W; Maximum Operating Temperature: 150 Cel; Tolerance: .1 %; Temperature Coef (ppm/Cel): 25;
MPMT20011002AT1
ARRAY/NETWORK RESISTOR; Mounting Type: SURFACE MOUNT; Rated Power Dissipation (P): .2 W; Maximum Operating Temperature: 150 Cel; Tolerance: .1 %; JESD-609 Code: e3;
MPMT20018001AT1
Vishay Intertechnology's MPMT20018001AT1 is a thin film resistor array with 2 elements, resistance of 2000 ohm and 8000 ohm. It has a power dissipation of 0.1 W, operating voltage of 100 V, and tolerance of 0.1%. Ideal for precision voltage divider applications due to its low temperature coefficient tracking at 2 ppm/°C.
MPMT10015001ATS
Vishay Intertechnology's MPMT10015001ATS is a thin film resistor array with 2 elements, offering 1000 ohm and 5000 ohm resistances. It has a power dissipation of 0.1 W, operating voltage of 100 V, and tolerance of 0.1%. Ideal for precision voltage divider applications due to its low temperature coefficient tracking of 2 ppm/°C.
MPMT20011002ATS
ARRAY/NETWORK RESISTOR; Mounting Type: SURFACE MOUNT; Rated Power Dissipation (P): .2 W; Maximum Operating Temperature: 150 Cel; Tolerance: .1 %; Rated Temperature: 70 Cel;
MPMT10011002ATS
ARRAY/NETWORK RESISTOR; Mounting Type: SURFACE MOUNT; Rated Power Dissipation (P): .2 W; Maximum Operating Temperature: 150 Cel; Tolerance: .1 %; Size Code: 1206;
MPMT1002AT1
Vishay Intertechnology's MPMT1002AT1 is a thin film resistor array with 0.1W power dissipation, 70°C rated temperature, and 2 ppm/°C temperature coefficient tracking. Ideal for applications requiring precise resistance values in compact SOT-23 packages for surface mounting type.
MPMT10011002AT5
ARRAY/NETWORK RESISTOR; Mounting Type: SURFACE MOUNT; Rated Power Dissipation (P): .2 W; Maximum Operating Temperature: 150 Cel; Tolerance: .1 %; First Element Resistance: 1000 ohm;
MPMT20018001AT5
ARRAY/NETWORK RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 2000 ohm; Rated Power Dissipation (P): .2 W; Maximum Operating Temperature: 150 Cel; Tolerance: .1 %;
MPMT20012002ATS
ARRAY/NETWORK RESISTOR; Mounting Type: SURFACE MOUNT; Rated Power Dissipation (P): .2 W; Maximum Operating Temperature: 150 Cel; Tolerance: .1 %; Element Power Dissipation: .1 W;
MPMT10012002AT1
ARRAY/NETWORK RESISTOR; Mounting Type: SURFACE MOUNT; Rated Power Dissipation (P): .2 W; Maximum Operating Temperature: 150 Cel; Tolerance: .1 %; Height (Package): 1.02 mm;
MPMT10019001AT5
Vishay Intertechnology's MPMT10019001AT5 is a thin film resistor network with 0.1W power dissipation and 70°C rated temperature, suitable for divider applications. Featuring two elements with resistances of 1000 ohm and 9000 ohm, it has a tolerance of 0.1% and operates at voltages up to 100V in surface mount configurations.
MPMT2002AT5
Vishay Intertechnology's MPMT2002AT5 is a thin film resistor network with 2 elements, each at 10000 ohm resistance. It has a power dissipation of 0.1 W and operates b/w -55 to 150 °C. Ideal for voltage division applications due to its low tolerance of 0.1% and tracking coefficient of 2 ppm/°C.
MPMT10019001DT1
Vishay Intertechnology's MPMT10019001DT1 is a thin film resistor array with 0.1W power dissipation, 70°C rated temperature, and 2 ppm/°C temp coef tracking. Ideal for divider network applications, it features a SOT-23 package style, gull wing terminals, and operates b/w -55 to 150°C with a tolerance of 0.5%.
MPMT10011002AT1
Vishay Intertechnology's MPMT10011002AT1 is a thin film resistor array with 0.1W power dissipation and 70°C rated temperature, suitable for divider networks. Featuring two elements with resistances of 1000 ohm and 10000 ohm, it operates b/w -55°C to 150°C and has a tolerance of 0.1%.
MPMT10012002AT5
ARRAY/NETWORK RESISTOR; Mounting Type: SURFACE MOUNT; Rated Power Dissipation (P): .2 W; Maximum Operating Temperature: 150 Cel; Tolerance: .1 %; No. of Terminals: 3;
MPMT10019001CTS
ARRAY/NETWORK RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 1000 ohm; Rated Power Dissipation (P): .2 W; Maximum Operating Temperature: 150 Cel; Tolerance: .25 %;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved