Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Vishay Intertechnology's 150D106X0020B2GE3 is a TANTALUM CAPACITOR with a capacitance of 10 uF and rated DC voltage of 20 V. It has a low Tan Delta of 0.06 and leakage current of 0.001 mA, making it suitable for applications requiring high reliability and stability in temperatures ranging from -55 to 125 °C.
Median Price
$2.663
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
Nova Conductors
1+ parts
100+ parts
-
1k+ parts
10k+ parts
VNN
Vyrian
Ampacity Inc.
$0.010
Continental Prestige Electronics
$2.609
Netroflash
$2.530
$2.476
Argo Parts USA
AZTECH Wire
$16.827
Tantalum is known for its high reliability and stability, making this capacitor suitable for critical applications where consistent performance is required.
Low tan delta indicates low dissipation factor, leading to high efficiency and minimal energy loss in the capacitor.
Low leakage current ensures that the capacitor retains its charge for longer periods, contributing to reliable operation.
Ammo pack packaging provides easy handling and organization, making it convenient for mass production and assembly.
Having only 2 terminals simplifies the installation process and reduces chances of error during assembly.
Axial package style allows for easy insertion and soldering on a circuit board, ensuring secure and stable connection.
Wire terminals offer good conductivity and mechanical strength, enhancing the durability and performance of the capacitor.
A wider negative tolerance range provides flexibility in circuit design, accommodating variations in capacitance values.
High maximum operating temperature ensures that the capacitor can withstand harsh environmental conditions, improving its reliability.
Low minimum operating temperature range allows for usage in a wide range of environments, making it versatile for different applications.
Tin terminal finish provides good solderability and corrosion resistance, ensuring a strong and stable connection in the circuit.
Polarized design prevents incorrect insertion and ensures proper orientation, reducing the risk of damage to the capacitor.
Compact diameter size allows for space-efficient placement on the PCB, especially in applications with limited space.
Through hole mounting offers secure attachment to the circuit board, providing mechanical stability and ease of soldering.
Optimal length dimension ensures compatibility with standard PCB layouts and facilitates proper positioning during installation.
Similar to negative tolerance, a wider positive tolerance range allows for flexibility in design and accommodates variations in capacitance values.
High capacitance value of 10 uF offers good energy storage capability, suitable for filtering and decoupling applications in electronic circuits.
Rated DC voltage of 20 V ensures that the capacitor can handle moderate voltage levels, making it suitable for various electronic devices and circuits.
Fixed Capacitors 150D106X0020B2GE3 attributes and parameters. Explore more Fixed Capacitors devices from Vishay Intertechnology
Capacitance:
Capacitor Type:
Diameter:
Dielectric Material:
JESD-609 Code:
Leakage Current (mA):
Length:
Mounting Feature:
Negative Tolerance:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Style (Meter):
Packing Method:
Polarity:
Positive Tolerance:
Rated DC Voltage (URdc):
Tan Delta:
Terminal Finish:
Terminal Shape:
150D106X0020B2GE3 Capacitors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8532.21.00.20
SB
Vishay Intertechnology, Inc. is a renowned American manufacturer of discrete semiconductors and passive electronic components that have been used in many consumer products and industrial applications worldwide. Founded by Polish-born businessman Felix Zandman in 1962, Vishay has grown to become one of the world's largest manufacturers of these components, with a strong presence in every major market around the globe. The company also offers value-added solutions such as its patented passive components, replacing a number of legacy parts with more reliable, cost effective solutions.
Executive Chairman of the Board, Chief Business Development Officer
Marc Zandman
Chief Executive Officer, President, and Director
Joel Smejkal
Executive Vice President and Chief Financial Officer
Lori Lipcaman
Itzehoe - Fab Phase 1
Fabrication
Fab Initiation
2025
Germany
Itzehoe
Wafer Capacity
US - Fab 3
1986
USA
Santa Clara
24,500
US - Fab 2
1972
8,000
Austria
1984
Vöcklabruck
25,000
Taiwan
1967
Hsintien
12,000
Italy - Fab 8
1961
Canada
Torino
15,000
Israel
2000
Yokneam Illit
400
LL4148
Itt Components
RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .005 us; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Non Repetitive Peak Forward Current: 1 A;
2N2222A
Crystalonics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BSS138
NXP Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; No. of Terminals: 3; Maximum Drain Current (ID): .2 A; Operating Mode: ENHANCEMENT MODE;
2N7002DWH6327XTSA1
Infineon Technologies
2N7002DWH6327XTSA1 by Infineon: N-CHANNEL FET with 60V DS Breakdown Voltage, 0.3A ID, and 3ohm RDS. Ideal for SWITCHING applications in small outline packages with GULL WING terminals.
AT90CAN128-16AU
Microchip Technology
AT90CAN128-16AU by Microchip Technology is a microcontroller with 8-bit data RAM and 16-bit address bus width. It operates at a max clock frequency of 16 MHz, making it suitable for industrial applications requiring low power mode and connectivity options like CAN, SPI, and USART. With 53 I/O lines and 8-channel 10-bit ADCs, this microcontroller offers versatile peripheral support for various embedded systems.
1N4148
Leshan Radio
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BAV99
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138K-13
Diodes Incorporated
BSS138K-13 by Diodes Inc. is a N-channel FET with 50V DS breakdown voltage, ideal for switching applications. It features single configuration with built-in diode, operating in enhancement mode. With 3 terminals and 0.31A max drain current, it offers high performance in small outline package style.
Excel (Suzhou) Semiconductor
LL4148GS08
Temic Semiconductors
LL4148GS08 by Temic Semiconductors is a glass diode with a max reverse recovery time of 0.008 us and max forward voltage of 1 V. It is a rectifier diode with a max output current of 0.15 A, ideal for applications requiring fast switching speeds and low power dissipation in electronic circuits.
Dionics-usa
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM358DT
STMicroelectronics
LM358DT by STMicroelectronics is a dual operational amplifier with a max input offset voltage of 9000 uV. It operates at a nominal voltage of 5V and has a min voltage gain of 25000. This amplifier is commonly used in applications requiring high precision and low power consumption.
ECA2DHG4R7
Panasonic
ECA2DHG4R7 by Panasonic is a 4.7uF aluminum electrolytic capacitor with 200V rated DC voltage. It features tan delta of 0.15, leakage current of 0.0664mA, and ripple current of 50mA, making it ideal for applications requiring high capacitance stability and low leakage in through-hole mounting setups at temperatures ranging from -25 to 105°C.
Bytesonic Electronics
SS14
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
General Semiconductor
LL4148-GS08
Vishay Intertechnology
The Vishay Intertechnology LL4148-GS08 is a glass diode with fast recovery time of 0.008 us and max reverse current of 5 uA. Ideal for applications requiring rectification, it has a breakdown voltage of 100 V and can handle a peak forward current of 2 A.
OHN3140U
Optek Technology
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Output Type: ANALOG CURRENT; Package Shape or Style: RECTANGULAR; Output Range: 25mA;
LM317LMX/NOPB
Texas Instruments
LM317LMX/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max input-output voltage differential of 40V. It operates in temperatures ranging from -40°C to 125°C and has a max output current of 0.1A, making it suitable for various applications requiring precise voltage regulation.
STM32F405RGT6
STM32F405RGT6 by STMicroelectronics is a 32-bit microcontroller with 2/3.3V power supplies, 16 external interrupts, and 196608 RAM bytes. Ideal for industrial applications, it features CAN(2), I2C(3), SPI(3) connectivity options and operates at a max clock frequency of 26 MHz. With low power mode and DMA support, it offers versatile performance in compact dimensions.
940C8W2P2K-F
Cornell Dubilier Electronics
The Cornell Dubilier Electronics 940C8W2P2K-F is a film capacitor with 2.2uF capacitance, rated for 850V DC and 450V AC. It features a ripple current of 18400mA, ESR of 3mohm, and operates b/w -55°C to 105°C. Ideal for applications requiring high voltage tolerance and reliability in through-hole mounting setups.
C0402C100J5GACTU
KEMET Corporation
KEMET C0402C100J5GACTU is a ceramic capacitor with 0.00001uF capacitance, 50V URdc, and ±5% tolerance. Ideal for surface mount applications in electronics requiring stable performance over -55 to 125°C temperature range.
0402B104K160CT
Fenghua Advanced Technology
CERAMIC CAPACITOR; Capacitance: .1 uF; Rated DC Voltage (URdc): 16 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC; Series: SIZE(X7R);
CC0603KRX7R9BB101
Yageo
Yageo CC0603KRX7R9BB101 is a SMT ceramic capacitor with 0.0001uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for applications requiring compact size, high reliability, and stable performance in various electronic circuits.
C1210C475K8RACTU
The KEMET Corporation C1210C475K8RACTU is a ceramic capacitor with 4.7uF capacitance and 10V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance over a wide temperature range.
VJ0805Y104KXATW1BC
Vishay Bc Components
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: .1 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
CL10B104KB8NNNC
Samsung Electro-mechanics
CL10B104KB8NNNC by Samsung Electro-mechanics is a ceramic capacitor with capacitance of 0.1uF and rated DC voltage of 50V. It has a negative tolerance of 10% and temperature coefficient of 15ppm/°C, suitable for surface mount applications in various electronic devices. With dimensions of 1.6mm x 0.8mm x 0.9mm, it operates b/w -55 to 125 °C providing stable performance in compact designs.
08055C103K4T2A
KYOCERA AVX
08055C103K4T2A by KYOCERA AVX is a SMT ceramic capacitor with 0.01uF capacitance, 10% tolerance, and X7R temperature coefficient. Ideal for AEC-Q200 applications requiring compact design and reliable performance in temperatures ranging from -55 to 125°C.
M39006/22-0350
Defense Logistics Agency
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 47 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 85 Cel; Dielectric Material: TANTALUM (WET);
12103D476MAT2A
12103D476MAT2A by KYOCERA AVX is a ceramic capacitor with 47uF capacitance and 25V rated DC voltage. It has X5R temperature characteristics, -55 to 85 °C operating range, and 20% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic devices.
GRM188R61E106KA73D
Murata Manufacturing
Murata Manufacturing's GRM188R61E106KA73D is a ceramic capacitor with 10uF capacitance and 25V rated DC voltage. Featuring X5R temperature characteristics, it operates b/w -55 to 85 °C, with ±10% tolerance. Ideal for surface mount applications in electronics requiring compact, high-performance capacitors.
GRM155R71C103KA01D
The Murata Manufacturing GRM155R71C103KA01D is a ceramic capacitor with capacitance of 0.01uF and rated DC voltage of 16V. It has a temperature coefficient of 15ppm/°C, suitable for surface mount applications in electronics requiring stable performance at temperatures ranging from -55 to 125 °C.
C0603C104K5RECAUTO
KEMET C0603C104K5RECAUTO is a ceramic capacitor with 0.1uF capacitance, rated for 50V DC voltage. It has X7R temperature characteristics and -55 to 125°C operating range. Ideal for automotive applications meeting AEC-Q200 standard, it features SMT mounting in a compact 1.6x0.8x0.8mm package.
CL31B106KBHNNNE
Samsung Electro-mechanics CL31B106KBHNNNE is a ceramic capacitor with 10uF capacitance and 50V rated DC voltage. With X7R temperature characteristics, it operates b/w -55 to 125 °C, making it ideal for SMT applications requiring compact size and high reliability.
CL21B103KBANNNC
CL21B103KBANNNC by Samsung Electro-mechanics is a ceramic capacitor with 0.01uF capacitance and 50V rated DC voltage. With X7R temperature characteristics, it operates b/w -55 to 125 °C, making it ideal for surface mount applications requiring high reliability and stability in various electronic circuits.
M39006/22-0345
Vishay Sprague
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 10 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (WET);
C5750X7S2A106M230KB
TDK
The TDK C5750X7S2A106M230KB is a ceramic capacitor with 10uF capacitance and 100V rated DC voltage. With X7S temperature characteristics, it operates b/w -55 to 125°C. Ideal for surface mount applications due to its rectangular package shape and wraparound terminals.
EMK107B7105KA-T
Taiyo Yuden
EMK107B7105KA-T by Taiyo Yuden is a ceramic capacitor with 1uF capacitance and 16V rated DC voltage. It has a temperature coefficient of 15% and operates b/w -55°C to 125°C, making it suitable for various electronic applications requiring stable performance in a compact SMT package.
GRM155R71H104KE14J
The Murata Manufacturing GRM155R71H104KE14J is a ceramic capacitor with capacitance of 0.1uF, rated at 50V URdc. It has a temperature coefficient of 15% and operates b/w -55°C to 125°C. Ideal for surface mount applications in various electronic devices requiring stable capacitance under changing temperatures.
CL05A104KA5NNNC
CL05A104KA5NNNC by Samsung Electro-mechanics is a ceramic capacitor with 0.1uF capacitance and 25V rated DC voltage. It features X5R temperature characteristics, -55 to 85 °C operating range, and 10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic devices.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
150D107X9020S2BE3
Vishay Intertechnology's 150D107X9020S2BE3 is a TANTALUM CAPACITOR with 100uF capacitance, 20V URdc, and 0.06 Tan Delta. Ideal for applications requiring reliable performance in temperatures ranging from -55°C to 125°C.
150D105X0035A2GE3
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 1 uF; Rated DC Voltage (URdc): 35 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (DRY/SOLID);
150D106X0050R2GE3
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 10 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (DRY/SOLID);
150D335X9075B2GE3
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 3.3 uF; Rated DC Voltage (URdc): 75 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (DRY/SOLID);
150D396X9010B2BE3
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 39 uF; Rated DC Voltage (URdc): 10 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (DRY/SOLID);
150D106X9035R2BE3
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 10 uF; Rated DC Voltage (URdc): 35 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (DRY/SOLID);
150D157X9015S2B
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 150 uF; Rated DC Voltage (URdc): 15 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (DRY/SOLID);
150D396X9035S2B
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 39 uF; Rated DC Voltage (URdc): 35 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (DRY/SOLID);
150D476X9035S2B
Vishay Intertechnology's 150D476X9035S2B is a TANTALUM CAPACITOR with 47uF capacitance and 35V rated DC voltage. It has low Tan Delta of 0.04, leakage current of 0.01mA, and operates b/w -55 to 125 °C. Ideal for applications requiring polarized capacitors in through-hole mounting setups.
150D396X9035S2T
150D476X9035S2BE3
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 47 uF; Rated DC Voltage (URdc): 35 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (DRY/SOLID);
150D106X9075R2B
Vishay Intertechnology's 150D106X9075R2B is a TANTALUM CAPACITOR with 10uF capacitance and 75V URdc. It has low Tan Delta of 0.04, leakage current of 0.008mA, and operates b/w -55 to 125 °C. Ideal for applications requiring high reliability in harsh environments like automotive electronics and industrial control systems.
150D157X9015S2BE3
150D156X9020B2BE3
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 15 uF; Rated DC Voltage (URdc): 20 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (DRY/SOLID);
150D105X9035A2BE3
150D106X9050R2BE3
150D106X0020B0B
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 10 uF; Rated DC Voltage (URdc): 20 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (DRY/SOLID);
150D106X0020B0T
150D106X0020B2BE3
150D106X0020B2TE3
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved