Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Other RF Connectors; Reliability: COMMERCIAL; Contact Gender: FEMALE; Body or Shell Style: PLUG; Total No. of Contacts: 1; Termination Type: CRIMP;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
Other Function RF Connectors PL3455ACP-217 attributes and parameters. Explore more Other Function RF Connectors devices from Vertiv
Body Depth:
Body or Shell Style:
Contact Gender:
Contact Style:
Manufacturer Series:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of Ports:
Maximum Operating Frequency:
Reliability:
Shell Finish:
Shell Material:
Sub-Category:
Termination Type:
Total No. of Contacts:
PL3455ACP-217 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.10
SB
World’s Leading Critical Digital Infrastructure Provider Today’s networks have become more distributed and more complex, making availability and connectivity symbiotic. You can’t have one without the other. Vertiv connects and protects your network with core-to-edge solutions and expertise that is unmatched anywhere in the world
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
M39029/56-351
Itt Cannon
CONNECTOR ACCESSORY; MIL Conformity: YES; Terminal Type: WIRE; IEC Conformity: NO; Alternate Contact Sources: ITT CANNON; Associated Military - Specifications: MIL-C-38999;
1N4148
Rfe International
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Forward Voltage (VF): 1 V; Config: SINGLE;
DS18B20U
Maxim Integrated
DS18B20U by Maxim Integrated is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
ULN2803A
Onsemi
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified;
2N2222A
Semiconductor Technology
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BAV99
Allegro MicroSystems
RECTIFIER DIODE; Terminal Position: END; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Texas Instruments
1N4148 by Texas Instruments is a rectifier diode with max reverse recovery time of 0.004 us and max forward voltage of 1V. Ideal for applications requiring low reverse current such as signal demodulation circuits. Operates at max temp of 200°C, making it suitable for high-temperature environments.
IRLML6401TRPBF
Infineon Technologies
IRLML6401TRPBF by Infineon is a P-CHANNEL FET for SWITCHING applications. It features a 12V DS Breakdown Voltage, 34A IDM, and 0.05ohm RDS(on). With a small outline package style, it operates in an ambient temperature range of -55 to 150 °C.
Won-top Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SZNUP2105LT1G
SZNUP2105LT1G by Onsemi is a Transient Suppression Device with 2 elements in a common anode configuration. It has a max non-repetitive peak reverse power dissipation of 350W and breakdown voltage of 29.1V. Ideal for applications requiring bidirectional polarity protection, such as automotive electronics and industrial equipment due to its AEC-Q101 compliance and high clamping voltage of 44V.
2N7002
Micro Commercial Components
Small Signal Field-Effect Transistors; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Transistor Application: SWITCHING; Maximum Drain Current (ID): .34 A; Package Style (Meter): SMALL OUTLINE;
261
Micronetics
Other Interface ICs; Temperature Grade: MILITARY; Terminal Form: FLAT; No. of Terminals: 14; Package Code: DFP; Package Shape: SQUARE;
SS14
Goodwork Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ULN-2803A
Vishay Sprague
Vishay Sprague's ULN-2803A is an 8-bit peripheral driver with a max supply voltage of 3V. Featuring open-collector output characteristics, it offers built-in transient protections and operates b/w -20°C to 85°C. Ideal for applications requiring sink current flow direction, this rectangular-shaped driver has a terminal pitch of 2.54mm and turn-on/off time of 1us.
AMS1117-3.3
Advanced Monolithic Systems
AMS1117-3.3 by Advanced Monolithic Systems is a fixed positive single output LDO regulator with 1A max output current, 3% voltage tolerance, and 1.3V dropout voltage. Ideal for applications requiring stable 3.3V supply in compact designs due to its small outline package and excellent load regulation of 0.025%.
PAP-06V-S
J S T Mfg
PAP-06V-S by J S T Mfg is a 6-contact BOARD CONNECTOR with 94V-0 UL Flammability Code. It has FEMALE contacts, CRIMP termination, and comes WITH CABLE ASSEMBLY for CABLE mounting applications.
ABS25-32.768KHZ-1-T
Abracon's ABS25-32.768KHZ-1-T crystal oscillator offers 10 ppm frequency tolerance, 126% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal operating frequency, such as IoT devices and precision timing systems.
Forward International Electronics
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Maximum Operating Temperature: 200 Cel; No. of Phases: 1;
1N4148WS
Multicomp Pro
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
7-1532004-0
TE Connectivity
TE Connectivity 7-1532004-0 is a threaded RF connector with PTFE insulator. It has a VSWR of 1.2, impedance of 50 ohm, and operates up to 2 GHz. Ideal for applications requiring right angle mounting on cables with male contact gender.
R110.081.020
Radiall S A
Radiall S A R110.081.020 RF MMCX Connector features 50 ohm impedance, 6 GHz frequency, and 500VAC dielectric voltage for high-performance RF applications. With POLYTETRAFLUOROETHYLENE insulator and GOLD finish, it ensures durability in temperatures ranging from -55 to 155 °C. Ideal for RG-178 cable termination with FEMALE contact gender in straight plug style.
R223435000
R223435000 RF connector by Radiall S A features a low insertion loss of 0.42 dB and a VSWR of 1.08, suitable for applications up to 12.4 GHz. With a snap coupling type and solder termination, this male connector with 50 ohm impedance is ideal for board mounting in high-frequency RF systems.
1055692-1
TE Connectivity's 1055692-1 RF Connector features 0.15 dB Insertion Loss, SNAP Coupling Type, and POLYPHENYLENE SULFIDE Insulator. With a max operating frequency of 6 GHz, it is ideal for board mounting in applications requiring a 50 ohm characteristic impedance and male contact gender.
81_MMBX-S50-0-1/111_NH
Huber+suhner Ag
81_MMBX-S50-0-1/111_NH by Huber+suhner Ag is a RF MMBX CONNECTOR with characteristic impedance of 50 ohm, operating up to 12.4 GHz. It features SNAP coupling, LCP/PFA insulator, and brass shell material. Ideal for board mounting in commercial applications due to its durability of 100 cycles and temperature range from -55 to 155 °C.
SMP-MSLD-PCS-2
Amphenol
RF SMP CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED;
5415322-2
TE Connectivity's 5415322-2 RF Connector features a body length of 0.75", insulation resistance of 5x10^9 ohm, and max operating frequency of 1 GHz. Ideal for board mounting applications, this female jack connector with a characteristic impedance of 75 ohm is designed for commercial reliability in electronic systems.
R222.680.000
Radiall S A R222.680.000 RF Connector features 0.42 dB Insertion Loss, 1.25 VSWR, and 12 GHz Max Operating Frequency. Ideal for board and panel mounting in applications requiring high-frequency signal transmission with a characteristic impedance of 50 ohm.
7325-1512-060
Radiall S A 7325-1512-060 RF SSLB Connector features 0.187" body diameter, 0.3 dB insertion loss, and gold termination. Ideal for board mounting in applications requiring 50 ohm impedance up to 12.4 GHz frequency range. MIL conformity ensures reliable performance in extreme temperatures from -65°C to 165°C.
3202-6000
Sv Microwave
3202-6000 RF SMPM Connector by Sv Microwave features a 0.156" body diameter and 0.08" body depth, with a max operating frequency of 40 GHz. It has a characteristic impedance of 50 ohm, suitable for panel mount applications in high-frequency environments. The connector is designed with stainless steel shell material and PTFE insulator for durability and reliable performance.
FSNS59U-25
Belden
Belden FSNS59U-25 RF F CONNECTOR has Insertion Loss of -0.2 dB, VSWR of -1.07, and 75 ohm Impedance. It operates b/w -40 to 60 °C and supports up to 1 GHz frequency. Ideal for cable applications requiring threaded coupling in CE standard environments.
1052075-1
TE Connectivity's 1052075-1 RF Connector features 0.665" body length, 0.07 dB insertion loss, and 10000000000 ohm insulation resistance. Ideal for commercial applications with a frequency up to 26 GHz, this threaded connector has PTFE insulator material and operates b/w -65°C to 125°C.
1075-1
Winchester Interconnect
1075-1 by Winchester Interconnect is a RF CONNECTOR with GOLD finish, suitable for 50 ohm systems. It features CRIMP termination and PLUG body style, ideal for CABLE mounting applications in Other Function RF Connectors category.
PL155-32
Vertiv
RF TRB CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Body or Shell Style: PLUG; Total No. of Contacts: 1; Termination Type: CRIMP;
3211-60298
RF SMPM CONNECTOR;
19S102-40ML5
Rosenberger Hochfrequenztechnik & Kg
19S102-40ML5 RF SMP connector by Rosenberger features 0.63 dB insertion loss, 1.5 VSWR, and operates up to 40 GHz. With MIL conformity, GOLD finish, and SNAP coupling, it is ideal for high-frequency applications requiring a characteristic impedance of 50 ohm.
BJ77FL
RF TRB CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Body or Shell Style: JACK; Maximum Operating Frequency: .5 GHz; Mounting Option-1: LOCKING;
Kings Electronics
RF CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Termination Type: CRIMP; Mounting Type: CABLE; MIL Conformity: NO;
920-265J-51P
RF CONNECTOR; Manufacturer Series: 920-265J-51P;
SF1521-60061-2S
RF CONNECTOR;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
1+ parts
$106.00
100+ parts
$54.25
1k+ parts
$11.90
10k+ parts
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved