Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TELECOM CIRCUIT;
Median Price
$12.225
Lifecycle Status
Suppliers In-Stock
5
In-Stock Inventory
1k+
Nova Conductors
1+ parts
$11.330
100+ parts
-
1k+ parts
10k+ parts
Vyrian
NAC Semi
$13.120
$12.110
Cyclops Electronics Ltd
Bristol Electronics
Corohmni
$9.840
Aranea Global
$11.103
$10.659
Aztec Data Supply Inc.
$11.130
Continental Prestige Electronics
Component Connect
Argo Parts USA
Futuretech Components
Other Function Telecom Interface ICs BMD-380-A-R attributes and parameters. Explore more Other Function Telecom Interface ICs devices from U-blox Ag
Telecom IC Type:
BMD-380-A-R Telecommunications trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
Our world is moving fast, soon your car will drive itself and you will carry your doctor in your pocket. Your home will power the grid and you will be connected like never before. At u-blox we are setting the beat delivering the core technology to locate and wirelessly connect people, machines and everything else making us the agile and reliable partner that will take you beyond expectations. With our innovative products and services, we empower customers to locate their devices and connect them from silicon to cloud. Ever since three bright ETH doctorate students and their professor founded u-blox in 1997, two things have driven everything we do: a desire to innovate and a constant focus on giving our customers a real competitive edge.
2N7002-7-F
SPC TECHNOLOGY/ MULTICOMP
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Terminal Form: GULL WING; Package Shape: RECTANGULAR;
2N7002
STMicroelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Drain Current (ID): .2 A; Transistor Application: SWITCHING;
2N2222A
General Diode
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148
Pro-an Electronic
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
ULN2803A
Onsemi
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified;
LM317LMX/NOPB
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Seated Height: 1.75 mm; Nominal Dropout Voltage-1: 3 V;
LM317AEMP/NOPB
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: SOP; Terminal Form: GULL WING; Qualification Status: Not Qualified; Width: 3.56 mm;
SMBJ18CA
Yageo
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
1N4148WS
Cheng-yi Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM555CN
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
MBR0520LT1
MBR0520LT1 by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, making it suitable for applications requiring low power consumption in compact electronic devices. This single-configured diode is surface mountable and has a max repetitive peak reverse voltage of 20V, ideal for small outline package designs.
KSZ9031RNXIC
Microchip Technology
KSZ9031RNXIC by Microchip Technology is a network interface chip with 1 transceiver. It operates at a data rate of 1000 Mbps and has a nominal voltage of 1.2V. This chip is commonly used in industrial applications requiring Ethernet connectivity.
Capar Components
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Forward Voltage (VF): 1 V; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Output Current: .15 A;
EU2B-YS3203F
Idec
ROTARY SWITCH;
C0603C104K5RACTU
KEMET Corporation
KEMET C0603C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
NC7WZ07P6X
The Onsemi NC7WZ07P6X is a logic gate with 2 functions, featuring a propagation delay of 4.8 ns at 1.8V supply voltage. With open-drain output characteristics, it operates in industrial temperatures from -40 to 85°C. Ideal for applications requiring fast signal processing and low power consumption in compact designs.
ULN-2803A
Vishay Sprague
Vishay Sprague's ULN-2803A is an 8-bit peripheral driver with a max supply voltage of 3V. Featuring open-collector output characteristics, it offers built-in transient protections and operates b/w -20°C to 85°C. Ideal for applications requiring sink current flow direction, this rectangular-shaped driver has a terminal pitch of 2.54mm and turn-on/off time of 1us.
LM358N
Samsung
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
BAV99
Promax-johnton
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SAM-M8Q-0
U-blox Ag
TELECOM CIRCUIT; Peak Reflow Temperature (C): NOT SPECIFIED; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED;
SX1308IMLTRT
Semtech
TELECOM CIRCUIT; Moisture Sensitivity Level (MSL): 1; Peak Reflow Temperature (C): 260; Terminal Finish: MATTE TIN; JESD-609 Code: e3;
450-0177C
Laird Technologies
TELECOM CIRCUIT; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Peak Reflow Temperature (C): NOT SPECIFIED;
ADRV9008BBCZ-1
Analog Devices
ADRV9008BBCZ-1 by Analog Devices is a telecom IC with 196 terminals in a low profile, fine pitch grid array package. It operates b/w -40 to 85°C, with a nominal voltage of 1.3V. Ideal for telecom applications requiring precise signal processing and connectivity in industrial environments.
ST25R3916-BWLT
WFM200S022XNA3R
Silicon Labs
TELECOM CIRCUIT; Maximum Time At Peak Reflow Temperature (s): 40; Peak Reflow Temperature (C): 260; Moisture Sensitivity Level (MSL): 3;
453-00060R
TELECOM CIRCUIT; Maximum Time At Peak Reflow Temperature (s): 30; Peak Reflow Temperature (C): 260;
PN5120A0HN1/C2,151
NXP Semiconductors
NXP Semiconductors PN5120A0HN1/C2,151 is a telecom IC with 32 terminals and operates at -30 to 85°C. It has a supply voltage of 3V and terminal pitch of 0.5mm. This chip carrier package is suitable for telecom circuits requiring low-profile components.
ZED-F9R-02B
FUSB340TMX
Fairchild Semiconductor
TELECOM CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 18; Package Code: HVQCCN; Package Shape: RECTANGULAR;
TGA2975-SM
Qorvo
Qorvo's TGA2975-SM is a 24-terminal telecom IC with a nominal voltage of 28V. It features a chip carrier package style, 0.65mm terminal pitch, and 0.9mm max seated height. Ideal for telecom circuit applications due to its compact size and surface-mount capability.
WT32I-E-AI6IAP
Silicon Labs' WT32I-E-AI6IAP is a telecom IC with 50 terminals, operating from -40 to 85°C. Its compact rectangular package measures 15.9mm x 23.9mm with a low profile of 2.55mm, suitable for industrial applications requiring surface mount technology.
AD9874ABST
AD9874ABST by Analog Devices is a telecom interface IC with 48 terminals in a square package. It operates at -40 to 85°C, with power supplies of 3/3.3V and 3/5V. This BICMOS technology IC is ideal for telecom circuits requiring low profile, fine pitch components.
SIM7020E
Simcom Wireless Solutions
SIM7020E by Simcom Wireless Solutions is a telecom IC with 42 terminals, operating from -40 to 85°C. It has a data rate of 0.0625 Mbps and nominal voltage of 3V. Ideal for industrial applications requiring low-power telecom circuitry in compact microelectronic assemblies.
BQ51013ARHLR
Texas Instruments
BQ51013ARHLR by Texas Instruments is a telecom interface IC with 20 terminals in a chip carrier package. It operates b/w 0-125°C, has a supply voltage of 5V, and data rate of 0.002 Mbps. Ideal for telecom circuits, it features nickel/palladium/gold terminal finish and very thin profile package style.
450-0178C
Ls Research
ZOE-M8Q
TMS3705EDRQ1
TMS3705EDRQ1 by Texas Instruments is a telecom IC with 16 terminals, operating b/w -40 to 85°C. It has a supply voltage of 5V and terminal pitch of 1.27mm. Ideal for industrial applications requiring AEC-Q100 screening level in a small outline package.
XB3-24Z8UT
Digi International
The Digi International XB3-24Z8UT is an industrial-grade telecom circuit with 20 terminals in a through-hole package. It operates b/w -40°C to 85°C, making it suitable for various telecom interface applications. This MICROELECTRONIC ASSEMBLY offers reliable performance in harsh environments.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
BMD-350-A-R
Rigado
TELECOM CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 47; Package Shape: RECTANGULAR; Maximum Operating Temperature: 85 Cel;
The U-blox Ag BMD-350-A-R is a telecom IC with 2 Mbps data rate, suitable for industrial applications. It operates b/w -40°C to 85°C, with peak reflow temperature of 250°C. This surface mount rectangular package has MSL level of 3 and is ideal for telecom circuit designs.
BMD-340-A-R
BMD-340-A-R by U-blox Ag is a surface mount telecom IC with a data rate of 2 Mbps. It operates in industrial temperature range (-40 to 85°C) and has MSL level 3. Ideal for applications requiring high-speed data transmission in harsh environments.
BMD-300-A-R
The U-blox Ag BMD-300-A-R is a surface mount telecom IC with a data rate of 2 Mbps. Operating temperature ranges from -40 to 85°C, suitable for industrial applications. Its package style is microelectronic assembly, making it ideal for various telecom circuit designs.
BMD-350-A-R-00
BMD-350-A-R-00 by U-blox Ag is a telecom IC with 47 terminals, operating at -40 to 85°C. It has a data rate of 2 Mbps and nominal voltage of 3V. This surface-mount IC in rectangular package is ideal for industrial applications requiring high-speed telecom circuit integration.
BMD-340-A-R-00
BMD-340-A-R-00 by U-blox Ag is a surface mount telecom interface IC with 1 function. It has a rectangular package shape, 68 terminals, and a max seated height of 1.9 mm. With a data rate of 2 Mbps, it is suitable for industrial applications requiring reliable communication at temperatures ranging from -40 to 85 °C.
BMD-330-A-R
TELECOM CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; Package Code: XMA; Package Shape: RECTANGULAR; Data Rate: 2 Mbps;
BMD-300-A-R-10
The U-blox Ag BMD-300-A-R-10 is a surface mount telecom IC with 47 terminals. It operates in industrial temperature range (-40 to 85 °C) and has a nominal voltage of 3V. With a data rate of 2 Mbps, it's ideal for applications requiring high-speed telecommunications functionality.
BMD-300-A-R-00
BMD-300-A-R-00 by U-blox Ag is a surface mount telecom IC with 47 terminals. It operates in industrial temperature range (-40 to 85°C) and has a nominal voltage of 3V. With a data rate of 2 Mbps, it is ideal for applications requiring high-speed telecommunications functionality.
BMD-360-A-R
BMD-360-A-R by U-blox Ag is a surface mount telecom IC with 47 terminals. It operates in industrial temperature range (-40 to 85°C) and has a nominal voltage of 3V. With a data rate of 2 Mbps, it is suitable for various telecom circuit applications.
BMD-330-A-R-00
TELECOM CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 47; Package Code: XMA; Package Shape: RECTANGULAR;
BMD-340-A-R-10
TELECOM CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 68; Package Code: XMA; Package Shape: RECTANGULAR;
BMD-345-A-R
BMD-360-A-R-00
BMD-360-A-R-00 by U-blox Ag is a surface mount telecom IC with 47 terminals. It operates in industrial temperature range (-40 to 85°C) and has a data rate of 2 Mbps. With a compact rectangular package style, it's ideal for telecom circuit applications.
BMD-301-A-R
BMD-301-A-R by U-blox Ag is a surface mount telecom IC with 2 Mbps data rate. Operating temperature range from -40 to 85°C makes it suitable for industrial applications. Its rectangular package style and no lead terminal form enhance its microelectronic assembly capabilities.
TELECOM CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 47; Package Shape: RECTANGULAR; Surface Mount: YES;
BMD-341-A-R-00
BMD-380-A-R-00
TELECOM CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 63; Package Code: XMA; Package Shape: RECTANGULAR;
BMD-380-A-R-10
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved