Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; UL Flammability Code: 94V-2; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Manufacturer Series: 480708;
Median Price
$0.325
Lifecycle Status
Suppliers In-Stock
70
In-Stock Inventory
1k+
Sager
1+ parts
$0.212
100+ parts
-
1k+ parts
10k+ parts
Arrow
$0.233
Boersig
$0.276
Powell Electronics
$0.316
$0.310
Interstate Connecting
$0.320
$0.280
$0.253
Bürklin Elektronik
$0.360
Misumi USA
$0.400
Distrelec
$0.419
RS Americas
$0.444
$0.338
$0.271
Conrad
$0.505
Mouser Electronics
$0.530
$0.363
$0.292
RS (Exports)
$0.580
$0.494
$0.418
TE Connectivity
$0.630
$0.300
PEI Genesis
Verical
Farnell
$0.340
Heilind Electronics
$0.258
$0.242
TTI
$0.251
$0.244
$0.237
Chip1Stop
$0.154
Element14
$0.345
$0.283
$0.281
Future Electronics
$0.240
$0.230
$0.220
Master Electronics
$0.229
$0.213
TTI Europe
$0.225
$0.214
NEP Electronics
DigiKey
$0.330
$0.261
Newark
$0.455
$0.323
$0.289
Adafruit Industries
Tomark Electronics Ltd
$0.070
Freelance Electronics
$0.130
DF Sales Co.
$0.150
Digiode
$0.209
Nova Conductors
$0.293
Hutch & Son
$0.390
CustomConnectorKits
$0.450
$0.380
Carlton-Bates
TME
$0.560
$0.377
$0.358
Rapid Electronics
$0.268
IBS Electronics
$0.350
$0.331
Electro Sonic
$0.375
$0.254
$0.248
Vyrian
Q Components
NAC Semi
$0.436
Lakeview Electronics
Chip Stock
Bristol Electronics
Sensible Micro Corp
A&K Electronics
Rotakorn
VNN
Cyclops Electronics Ltd
LWI Electronics Inc
Manoshevitz Elec. Sales
Microwave Components, LLC
Semi Source
R&J Components
Diverse Electronics
ACDS - Activité Composants Distribution Service
Holdelec - ElecDif-Pro
EMSNET
Electronic Treasures
Resion
Standard Data Resources
American Connector Supply Corp
Prism Electronics
Masline Electronics Inc.
A2Z Electronics, Inc.
Century Electronics Ltd.
Elcom Components
Classic Components Corporation
Semicontronic
$0.157
$0.153
$0.152
Corphita
$0.198
Argo Parts USA
$0.284
Ampacity Inc.
$0.346
Allen Electronics Distributors
$0.510
CoreStaff
$0.555
$0.264
$0.217
J3
$3.124
Aztec Data Supply Inc.
$10.391
Perfect Parts
Assy Fe
EMSNET (Excess)
GreenTree Electronics
$0.307
Abacus Technologies
Kepictronics
Authorized Procurement Solutions
Eastek
Futuretech Components
Continental Prestige Electronics
Netroflash
$0.287
$0.278
$0.272
Robosynatics
$9.400
$9.208
Lucentia Tech
Lee Johnson Sales, Inc.
Advanced Electronics
Standard Data Resources (Excess)
Combination Line Connectors 1-480708-0 attributes and parameters. Explore more Combination Line Connectors devices from Tyco Electronics Amp
Additional Features:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Contact Gender:
Contact Material:
DIN Conformance:
Empty Shell:
Filter Feature:
IEC Conformity:
Insulator Material:
MIL Conformity:
Manufacturer Series:
Mating Info.:
Mixed Contacts:
Mounting Type:
Option:
Termination Type:
Total No. of Contacts:
UL Flammability Code:
1-480708-0 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
SMBJ18CA
Onsemi
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Vishay Semiconductors
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SN6505BDBVR
Texas Instruments
SN6505BDBVR by Texas Instruments is a small outline, low profile interface IC with 6 terminals. It operates b/w -55 to 125°C and supports a max output current of 1.5A at supply voltages ranging from 2.25V to 5.5V. Ideal for military-grade applications requiring compact design and high reliability.
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
BSS138
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3 ohm; Minimum DS Breakdown Voltage: 50 V; Terminal Form: GULL WING;
MBR0520LT1G
MBR0520LT1G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, has a peak reflow temperature of 260°C, and a repetitive peak reverse voltage of 20V. This diode is ideal for applications requiring high-speed switching in compact electronic devices.
06035C103KAT2A
KYOCERA AVX
06035C103KAT2A by KYOCERA AVX is a SMT ceramic capacitor with 0.01uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and 10% tolerance. Ideal for applications requiring compact surface mount capacitors with stable performance in a wide temperature range.
ULN2803ADW
ULN2803ADW by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates b/w -40 to 85 °C and has a max supply voltage of 3 V. Ideal for applications requiring buffer or inverter-based peripheral drivers with sink current flow direction.
LL4148
Taitron Components
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM107H
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Code: TO-99; Package Shape: ROUND;
LM358M
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
C1206C104K5RACTU
KEMET Corporation
KEMET C1206C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications due to its rectangular package shape and wraparound terminals.
Infineon Technologies
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Drain Current (Abs) (ID): .2 A; Maximum Feedback Capacitance (Crss): 8 pF;
RN41N-I/RM
Microchip Technology
Microchip Technology's RN41N-I/RM is a telecom IC with 35 terminals, operating from -40 to 85°C. It has a supply voltage of 3.3V and is surface mountable in industrial applications. The package style is rectangular, measuring 13.2mm x 20.1mm with a seated height of 2.2mm, suitable for telecom interface functions.
Eic Semiconductor
SS14
General Instrument
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MMBT3906LT1G
MMBT3906LT1G by Onsemi is a PNP BJT with VCEsat of 0.4V, hFE of 30, and fT of 250MHz. Ideal for small signal applications in electronics due to its low power dissipation, high transition frequency, and compact SOT-23 package. Suitable for use in temperature-sensitive environments with an operating range from -65°C to 150°C.
DS18B20Z
Maxim Integrated
DS18B20Z by Maxim Integrated is a 12-bit digital temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Suitable for applications requiring precise temperature monitoring in compact spaces.
Leshan Radio
RECTIFIER DIODE; Surface Mount: YES; Config: SINGLE; No. of Phases: 1; No. of Elements: 1; Maximum Forward Voltage (VF): .5 V;
1N4148
Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Forward Voltage (VF): 1 V; Maximum Operating Temperature: 200 Cel; No. of Elements: 1;
2286003-3
TE Connectivity's 2286003-3 is a Combination Line Connector with dimensions of 1.244" x 0.591" x 0.622". It has a rated voltage of 48V, operating temperature range from -55 to 125°C, and UL flammability rating of 94V-0. Ideal for applications requiring a polarized connector with a signal current rating of 13A.
AT06-2S-OMGRY
Amphenol
The Amphenol AT06-2S-OMGRY is a Combination Line Connector with 2 contacts, rated at 13A. Featuring POLYETHYLENE insulator material, it operates b/w -55 to 125°C. Ideal for cable mounting applications, this connector has a compact body size of 0.728" x 0.713" x 1.72", making it suitable for various electronic devices.
AT04-12PA-RD01
The Amphenol AT04-12PA-RD01 is a Combination Line Connector with 12 contacts, rated at 13A. Featuring POLYETHYLENE insulator material, it operates b/w -55°C to 125°C. Ideal for cable mounting applications, this connector has a body size of 1.598" x 0.882" x 1.996".
1-480708-0
Tyco Electronics Amp
13795018
Delphi Connection Systems
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Empty Shell: NO; Maximum Operating Temperature (Cel): 125; Insulator Material: GLASS FILLED POLYBUTYLENE TEREPHTHALATE;
366380003
Molex
Molex 366380003 is a Combination Line Connector with 48 contacts, rated at 6A signal current. It features male contact gender, SQ pin-skt style, and matte tin over nickel finish. Ideal for board mounting applications in environments ranging from -40°C to 100°C.
ATP04-4P-KIT01
The Amphenol ATP04-4P-KIT01 is a Combination Line Connector with 4 contacts, rated at 25A. It features POLYETHYLENE insulator material and operates b/w -55°C to 125°C. Ideal for cable mounting applications requiring male contact gender and crimp termination.
33472-0601
Molex 33472-0601 is a Combination Line Connector with 0.138" Mating Contact Pitch, GLASS FILLED POLYAMIDE Insulator, and 22A Rated Current. It is used for commercial applications, featuring a polarized housing and crimp termination for secure cable mounting.
1-480702-0
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; UL Flammability Code: 94V-2; Additional Features: MATE-N-LOK; Mounting Type: CABLE AND PANEL;
DT06-4S-CE02
TE Connectivity's DT06-4S-CE02 is a 4-contact combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125 °C. Ideal for cable mounting applications, featuring a polarized design and UL certification.
12015791
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; MIL Conformity: NO; DIN Conformance: NO; Contact Material: NOT SPECIFIED;
AT04-2P
The Amphenol AT04-2P is a combination line connector with 2 contacts, rated for 13A signal current. It features a polyethylene insulator and operates b/w -55°C to 125°C. Ideal for cable mounting applications, mating with AT04-2S connectors, using crimp termination for male contact pins.
DT06-4S
The TE Connectivity DT06-4S is a 4-contact combination line connector with insulation resistance of 1GΩ, rated voltage of 250V, and operating temperature range from -55°C to 125°C. It is used for cable mounting applications in commercial settings due to its durability, UL certification, and nickel termination contact finish.
ATP04-2P-EC01
The Amphenol ATP04-2P-EC01 is a Combination Line Connector with Polyethylene insulator, rated for 25A signal current. Operating temperature range from -55 to 125°C. Ideal for cable mounting applications requiring crimp termination, featuring a receptacle shell style and round pin/socket contact gender.
DT06-12SA-EP08
TE Connectivity's DT06-12SA-EP08 is a 2-row combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125 °C. Ideal for cable mounting applications requiring a polarized, UL-rated connector with strain relief.
DT06-2S-CE06
TE Connectivity's DT06-2S-CE06 is a 1.118" x 0.591" x 0.621" combination line connector with GLASS FILLED POLYAMIDE insulator, rated for 250V and -55 to 125°C. Featuring UL 94V-0 flammability code, it has a polarized design, 13A signal current rating, and is ideal for cable mounting applications.
12033769
Aptiv
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; DIN Conformance: NO; Empty Shell: NO; Insulator Material: POLYAMIDE66;
DTM04-2P
TE Connectivity's DTM04-2P is a 1.62" x 0.651" x 0.638" combination line connector with GLASS FILLED POLYAMIDE insulator, rated for 250V and -55 to 125°C. It features 2 contacts, UL certification, and polarized design. Ideal for applications requiring a 7.5A signal current in cable mounting setups with crimp termination and strain relief option.
DRC23-40PA-N012
TE Connectivity's DRC23-40PA-N012 is a 4-row combination line connector with dimensions of 1.785" x 3.8". Rated for 250V and 7.5A, it operates b/w -55°C to 125°C. Ideal for panel mounting applications requiring a polarized, soldered male receptacle with UL certification (94V-0).
7282-1081-40
Yazaki
Yazaki's 7282-1081-40 is a Combination Line Connector with POLYBUTYLENE TEREPHTHALATE insulator. It has 8 contacts, male gender, and mates with 7283-1081-40. Designed for cable mounting, it is ideal for automotive wiring applications.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
1-480700-0
TE Connectivity 1-480700-0 is a Combination Line Connector with 0.8" body length, 1000000000 ohm insulation resistance, and 105°C max operating temp. Ideal for cable mounting applications, featuring POLYAMIDE insulator material and FEMALE contact gender.
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED; MIL Conformity: NO;
1-480698-0
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; DIN Conformance: NO; Filter Feature: NO; Manufacturer Series: 480698;
1-480703-0
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Total No. of Contacts: 4; UL Flammability Code: 94V-2; DIN Conformance: NO;
1-480699-0
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Additional Features: MATE-N-LOK; DIN Conformance: NO; Contact Material: NOT SPECIFIED;
1-480706-0
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mixed Contacts: NO; Insulator Material: POLYAMIDE; Manufacturer Series: 480706;
1-480318-0
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Contact Material: NOT SPECIFIED; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Total No. of Contacts: 2;
1-480424-0
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Manufacturer Series: 480424; DIN Conformance: NO; Filter Feature: NO;
1-480273-0
TE Connectivity's 1-480273-0 is a combination line connector with polyamide insulator material. It has two loaded rows and can operate in temperatures ranging from -55 to 105°C. This plug-style connector is commonly used in panels for crimp termination applications.
1-480707-9
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Connectors: ONE; Filter Feature: NO; Minimum Operating Temperature: -55 Cel;
1-480711-0
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; DIN Conformance: NO; Insulator Material: POLYAMIDE; Mounting Type: PANEL;
1-480672-0
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Connectors: ONE; EMI Shielded: NO; Mains Connector Rating: 115/230VAC;
1-480277-0
TE Connectivity's 1-480277-0 is a Combination Line Connector with 3 rows, UL94V-2 rated POLYAMIDE insulator, and operating temperatures from -55 to 105°C. It has 9 contacts, panel mount type, and male crimp termination. Ideal for applications requiring a receptacle connector with rectangular contact pattern at 115/230VAC mains rating.
1-480698-9
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; IEC Conformity: NO; Mounting Type: CABLE OR PANEL; Manufacturer Series: 480698;
1-480711-9
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Contact Finish: NOT SPECIFIED; Mounting Type: PANEL; Contact Material: NOT SPECIFIED;
1-480270-0
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Mating Contact Finish: NOT SPECIFIED;
1-480673-0
TE Connectivity 1-480673-0 is a Combination Line Connector with POLYAMIDE insulator, UL 94V-2 flammability code, and 9 contacts. It operates b/w -55 to 105°C, suitable for panel mounting applications requiring male crimp termination at 115/230VAC mains connector rating.
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Total No. of Contacts: 9; Empty Shell: NO; UL Flammability Code: 94V-2;
1-480707-8
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Filter Feature: NO; Empty Shell: NO; MIL Conformity: NO;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved