Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Molex 30700-1187 is a Combination Line Connector with dimensions of 1.108" x 0.928" x 1.243". It has 18 contacts, rated for 7A signal current, and operates b/w -40°C to 100°C. Ideal for board mounting applications requiring male SQ PIN-SKT contacts in SYNDIOTACTIC POLYSTYRENE insulator material.
Median Price
$1.882
Lifecycle Status
Suppliers In-Stock
14
In-Stock Inventory
1k+
Farnell
1+ parts
$1.500
100+ parts
$1.020
1k+ parts
-
10k+ parts
Master Electronics
$1.848
$1.680
$1.600
$1.330
Element14
$2.110
$2.040
$1.920
Newark
$2.620
$2.170
$1.830
Mouser Electronics
$2.790
$2.050
$1.620
$1.540
Verical
$1.915
$1.662
Chip1Stop
Powell Electronics
$1.570
$1.290
TestEquity
Digiode
$1.672
Nova Conductors
$1.755
VNN
Vyrian
IBS Electronics
$1.383
Andel Nordic
$0.136
$0.131
Semicontronic
$1.220
$1.190
$1.183
Argo Parts USA
$1.560
Corphita
$1.584
Continental Prestige Electronics
$1.990
$1.280
$1.100
Aztec Data Supply Inc.
$4.038
Advanced Electronics
$4.650
$4.418
Perfect Parts
Assy Fe
Netroflash
$1.720
$1.667
$1.632
Robosynatics
$15.655
Lucentia Tech
The compact size of the body allows for efficient use of space and easy installation in tight spaces.
The narrow width of the body helps in saving space on the board and enables close placement of multiple connectors.
The depth of the body provides sufficient space for secure connection without compromising on overall compact design.
The insulator material offers high electrical insulation properties and helps in reducing signal interference, ensuring reliable performance.
The high maximum operating temperature allows for use in demanding environments without risking damage or malfunction.
The low minimum operating temperature ensures functionality in extreme cold conditions, making the connector versatile for various applications.
The high rated current capacity enables the connector to handle signals efficiently without risk of overheating or voltage drop.
The ample number of contacts provides flexibility for connecting multiple signals or components, enhancing the versatility of the product.
The board mounting type simplifies installation on circuit boards, ensuring secure placement and reliable connections.
The use of glass-filled material in the shell enhances durability and provides robust protection against mechanical stress or impact.
The solder termination type offers a strong and stable connection, minimizing signal loss and ensuring long-term reliability.
The male contact gender allows for easy mating with female connectors, ensuring compatibility and ease of use in various setups.
The square pin socket contact style ensures secure and reliable connections, reducing the risk of signal loss or disconnection.
Combination Line Connectors 30700-1187 attributes and parameters. Explore more Combination Line Connectors devices from Molex
Additional Features:
Body Width:
Body Depth:
Body Length:
Connector Type:
Mating Contact Finish:
Contact Gender:
Contact Material:
Contact Style:
DIN Conformance:
Empty Shell:
Filter Feature:
IEC Conformity:
Insulator Material:
MIL Conformity:
Mating Info.:
Mixed Contacts:
Mounting Type:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
Rated Current - Signal:
Shell Material:
Termination Type:
Total No. of Contacts:
30700-1187 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
PCN Assembly/Origin - Mult Devs Cancel Supplier Change 16/Aug/2022
PCN Packaging - 30700 Series 03/Jul/2014
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
SS14
Vishay Intertechnology
Vishay Intertechnology's SS14 is a Schottky rectifier diode with a max forward voltage of 0.5V and output current of 1A. Operating at up to 125°C, it has a repetitive peak reverse voltage of 40V. Ideal for surface mount applications, it suits various electronic circuits requiring efficient rectification and low forward voltage drop.
M24308/2-1F
Adi Electronics
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; MIL Conformity: YES; Filter Feature: NO; Mating Info.: MULTIPLE MATING PARTS AVAILABLE;
BSS138
Siemens
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Drain-Source On Resistance: 3.5 ohm; Terminal Finish: Tin/Lead (Sn/Pb);
CRG0805F10K
Tyco Electronics Components
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
BAV99
Jgd Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .006 us; Maximum Repetitive Peak Reverse Voltage: 70 V; Maximum Forward Voltage (VF): 1 V; Maximum Operating Temperature: 150 Cel;
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM555CM
Onsemi
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
1N4148WT
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
IRLML6402TRPBF
Infineon Technologies
IRLML6402TRPBF by Infineon is a P-CHANNEL FET for SWITCHING applications. It features a 20V DS Breakdown Voltage, 22A IDM, and 0.065 ohm RDS(on). With a small outline package and matte tin finish, it operates in temperatures from -55 to 150 °C.
1N4148
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N2222A
Transistor & Electronic
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
MBRS340T3G
MBRS340T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.5V and output current of 4A. It operates b/w -65°C to 150°C, making it suitable for various applications requiring high-speed switching and low power loss in a small outline package. The diode's matte tin terminal finish and dual position make it ideal for surface mount PCB designs.
350766-1
TE Connectivity
TE Connectivity 350766-1 is a rectangular power connector with 0.25" mating contact pitch, rated for 600V and operating temperatures from -55 to 105°C. It has a durable design with POLYAMIDE insulator material, suitable for commercial applications requiring secure crimp termination in cable mounting setups.
ULN2803A
NPN; Configuration: COMPLEX; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; JESD-30 Code: R-PDIP-T18;
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Non Repetitive Peak Forward Current: 40 A; Technology: SCHOTTKY; No. of Elements: 1;
LM555CN
Intersil
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
NC7WZ07P6X
The Onsemi NC7WZ07P6X is a logic gate with 2 functions, featuring a propagation delay of 4.8 ns at 1.8V supply voltage. With open-drain output characteristics, it operates in industrial temperatures from -40 to 85°C. Ideal for applications requiring fast signal processing and low power consumption in compact designs.
Panjit International
New England Semiconductor
DT06-12SA-EP08
TE Connectivity's DT06-12SA-EP08 is a 2-row combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125 °C. Ideal for cable mounting applications requiring a polarized, UL-rated connector with strain relief.
3-1418390-1
TE Connectivity's 3-1418390-1 is a Combination Line Connector with dimensions of 1.693" x 1.012" x 1.23". Rated for 60V, it operates b/w -40°C to 140°C, ideal for cable mounting applications at up to 40A signal current.
5055650401
Molex
Molex 5055650401 is a Combination Line Connector with 0.276"x.148"x.122" dimensions, made of POLYESTER for -40 to 105°C temp range. It has 4 contacts, UL standard, FEMALE gender, RECEPTACLE style for CABLE mounting and CRIMP termination. Ideal for various electronic applications.
1718488-1
TE Connectivity's 1718488-1 is a Combination Line Connector with dimensions of 1.512"x.925"x.435". Rated for 36V, it operates b/w -40 to 120°C and has UL Flammability Code 94-HB. With 7 contacts, it is used in cable mounting applications as a polarized receptacle connector with SQ PIN-SKT contact style.
DT04-12PA-P075
TE Connectivity's DT04-12PA-P075 is a 2-row combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125 °C. Ideal for cable mounting applications requiring a polarized male connector with strain relief option.
3-794617-6
TE Connectivity's 3-794617-6 is a Combination Line Connector with 250V rated voltage and 105°C max operating temp. Featuring POLYAMIDE66 insulator, it has 6 contacts for signal current up to 5A. Ideal for cable mounting applications, this UL-certified connector offers reliable crimp termination in receptacle style shells.
1-967624-1
TE Connectivity's 1-967624-1 is a combination line connector with a mating contact pitch of 0.197 inches. It has a body length of 1.228 inches and depth of 1.043 inches, making it suitable for cable mounting applications. With its glass-filled polybutylene terephthalate insulator material and crimp termination type, this connector offers reliable performance in commercial settings.
4-1564526-1
TE Connectivity's 4-1564526-1 is a Combination Line Connector with dimensions of 2.461" x 1.567" x 1.854". Rated for 60V, it has GLASS FILLED POLYBUTYLENE TEREPHTHALATE insulator and operates b/w -40 to 140 °C. Ideal for applications requiring a polarized, UL-rated connector with 18 contacts and a current rating of 20A.
DT04-2P-C015
TE Connectivity's DT04-2P-C015 is a 1.708" x 0.675" x 0.67" combination line connector with GLASS FILLED POLYAMIDE insulator, rated for 250V and -55 to 125°C. It has UL 94V-0 flammability code, polarized key, and supports 13A signal current. Ideal for cable mounting applications requiring male crimp termination with strain relief.
MX34007NF1
Japan Aviation Electronics Industry
MX34007NF1 by Japan Aviation Electronics Industry is a Combination Line Connector with dimensions 0.976" x 0.421" x 0.811". It has 7 contacts, rated current of 3A, and uses solder termination. Ideal for board mounting applications due to its male contact gender and glass-filled syndiotactic polystyrene shell material.
776437-1
TE Connectivity 776437-1 is a Combination Line Connector with dimensions 1.509"x1.449"x1.24". Rated for 250V, it has GLASS FILLED POLYBUTYLENE TEREPHTHALATE insulator material and operates b/w -40 to 125°C. With 12 contacts, it's ideal for cable mounting applications requiring a polarized, crimped female connector with strain relief.
12010996
Delphi Connection Systems
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Total No. of Contacts: 1; Contact Material: NOT SPECIFIED; Empty Shell: YES;
12010105
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Total No. of Contacts: 2; Empty Shell: NO; Mixed Contacts: NO;
HVSL633063A106I
Amphenol
Amphenol's HVSL633063A106I is a 3-contact combination line connector with POLYAMIDE66 insulator. It has a max operating temp of 125°C and -40°C min temp. Ideal for cables, it features COPPER ALLOY shell material, TIN finish, and UL-rated 40A signal current capacity.
2040278-2
2040278-2 by TE Connectivity is a Combination Line Connector with dimensions of 0.799" x 0.925" x 1.476". Rated for 250V, it operates b/w -40 to 125°C. This polarized connector has UL certification and is suitable for cable mounting applications.
DTM06-08SA-E007
TE Connectivity's DTM06-08SA-E007 is a 2-row combination line connector with GLASS FILLED POLYAMIDE insulator. It has 8 contacts, rated at 250V and 7.5A for signal current. With UL certification, it operates b/w -55 to 125°C, making it ideal for cable mounting applications requiring a polarized female plug with strain relief option.
DT16-18SA-K004
TE Connectivity's DT16-18SA-K004 is a 13A combination line connector with 18 contacts. Made of glass-filled polyamide, it features male gender and round pin-socket contact style. Ideal for applications requiring reliable signal transmission in various industries.
30700-1207
The Molex 30700-1207 is a Combination Line Connector with dimensions of 1.208" x 0.928" x 1.243". It has 20 contacts, rated for 7A signal current, and operates b/w -40°C to 100°C. Ideal for board mounting applications requiring male SQ PIN-SKT contacts in SYNDIOTACTIC POLYSTYRENE insulator material.
ATM06-2S-SR01GY
Amphenol's ATM06-2S-SR01GY is a female combination line connector with 2 contacts, rated at 7.5A for signal current. Made of polyethylene, it operates b/w -55 to 125°C and has a compact body size of 0.567" x 0.638" x 1.469". Ideal for cable mounting applications in various industries.
12176836
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED; DIN Conformance: NO;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
30700-1120
The Molex 30700-1120 Combination Line Connector features a body size of 0.808" x 0.928" x 1.243", with SYNDIOTACTIC POLYSTYRENE insulator material. It has 12 contacts, rated for 7A signal current, suitable for board mounting applications. Operating temperature range is -40 to 100°C, with solder termination and male SQ PIN-SKT contact style.
30700-1167
The Molex 30700-1167 is a Combination Line Connector with dimensions of 1.008" x 0.928" x 1.243". It has 16 contacts, rated for 7A signal current, and operates b/w -40°C to 100°C. Ideal for board mounting applications requiring male SQ PIN-SKT contacts in SYNDIOTACTIC POLYSTYRENE insulator material.
30700-1080
The Molex 30700-1080 is a Combination Line Connector with dimensions of 0.608" x 0.928" x 1.243". It features SYNDIOTACTIC POLYSTYRENE insulator material, rated for -40 to 100°C operating temperature range, and can handle up to 7A signal current. Ideal for board mounting applications requiring an 8-contact male SQ PIN-SKT connector.
30700-1081
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Body Width: .928 inch; Insulator Material: SYNDIOTACTIC POLYSTYRENE; Rated Current - Signal: 7 A;
30700-1168
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Maximum Operating Temperature (Cel): 100; Body Width: .928 inch; Total No. of Contacts: 16;
30700-1100
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Insulator Material: SYNDIOTACTIC POLYSTYRENE; Mating Contact Finish: NOT SPECIFIED; Mating Info.: MULTIPLE MATING PARTS AVAILABLE;
30700-1082
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mounting Type: BOARD; Termination Type: SOLDER; Empty Shell: NO;
30700-1101
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; MIL Conformity: NO; Filter Feature: NO; No. of Rows Loaded: 2;
30700-1102
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Additional Features: POLARIZED; Rated Current - Signal: 7 A; Mixed Contacts: NO;
30700-1121
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mixed Contacts: NO; Contact Style: SQ PIN-SKT; MIL Conformity: NO;
30700-1122
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mating Contact Finish: NOT SPECIFIED; Maximum Operating Temperature (Cel): 100; Insulator Material: SYNDIOTACTIC POLYSTYRENE;
30700-1147
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Total No. of Contacts: 14; Filter Feature: NO; Termination Type: SOLDER;
30700-1148
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Empty Shell: NO; Body Width: .928 inch; Minimum Operating Temperature: -40 Cel;
30700-1149
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Total No. of Contacts: 14; Contact Style: SQ PIN-SKT; Mating Info.: MULTIPLE MATING PARTS AVAILABLE;
30700-1169
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Additional Features: POLARIZED; Filter Feature: NO; MIL Conformity: NO;
30700-1188
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Shell Material: GLASS FILLED SYNDIOTACTIC POLYSTYRENE; Mating Contact Finish: NOT SPECIFIED; Contact Style: SQ PIN-SKT;
30700-1189
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Empty Shell: NO; Contact Style: SQ PIN-SKT; Filter Feature: NO;
30700-1208
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Contact Material: NOT SPECIFIED; Rated Current - Signal: 7 A; Mating Contact Finish: NOT SPECIFIED;
30700-1209
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Minimum Operating Temperature: -40 Cel; Total No. of Contacts: 20; IEC Conformity: NO;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved