Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
DIP Switches; Mounting Feature: THROUGH HOLE-STRAIGHT; Manufacturer Series: 5435640; Termination Type: SOLDER; Body Width: 9.65 inch; null: SPST;
Median Price
$1.780
Lifecycle Status
Suppliers In-Stock
26
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$2.940
100+ parts
$1.980
1k+ parts
$1.610
10k+ parts
$1.560
DigiKey
$3.400
$2.617
$2.071
$1.776
Powell Electronics
$6.468
-
$3.477
TTI Europe
$1.479
$1.329
Avnet
$1.377
$1.342
Verical
$1.162
Master Electronics
$1.820
Future Electronics
$0.930
$0.885
$0.850
Chip1Stop
$2.030
$1.900
Newark
$2.810
$2.260
$2.190
Bürklin Elektronik
$1.750
$1.720
TTI
Arrow
$1.458
$1.431
Bristol Electronics
$1.896
$1.175
$0.711
Nova Conductors
$2.653
TME
$2.790
$2.240
IBS Electronics
$1.417
$1.353
$1.304
Electro Sonic
$1.290
$1.260
Vyrian
VNN
ComSIT Distribution GmbH
ComSIT USA
NAC Semi
$3.020
$2.800
Dan-Mar Components
Prism Electronics
Electronics Depot
Semicontronic
$1.730
$1.687
$1.678
Continental Prestige Electronics
$1.300
Bastille Electronics
$2.520
$2.394
$2.361
Argo Parts USA
Aztec Data Supply Inc.
$3.779
Perfect Parts
Authorized Procurement Solutions
Glotronic Ltd.
Eastek
GreenTree Electronics
Formix International (Excess)
Assy Fe
iodParts Technologies Inc.
DIP & SIP Switches 3-5435640-9 attributes and parameters. Explore more DIP & SIP Switches devices from Tyco Electronics Alcoswitch
Mounting Type:
Length/Diameter:
Height:
Width:
Termination Type:
Manufacturer Series:
3-5435640-9 Relays trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.50.90.65
SB
2N7002
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Operating Mode: ENHANCEMENT MODE; Minimum DS Breakdown Voltage: 60 V; Package Shape: RECTANGULAR;
BSS123LT1G
Onsemi
BSS123LT1G by Onsemi is a N-CHANNEL FET with 100V DS breakdown voltage, 0.17A drain current, and 6 ohm on resistance. Ideal for switching applications, it operates in enhancement mode with a max power dissipation of 0.225W. It comes in a small outline package with gull wing terminals and can withstand temperatures from -55 to 150°C.
ULN2803A
STMicroelectronics
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; No. of Elements: 8; Minimum DC Current Gain (hFE): 1000;
INA826AIDGKR
Texas Instruments
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
CRCW04020000Z0ED
Vishay Intertechnology
Vishay Intertechnology's CRCW04020000Z0ED is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating b/w -55 to 155 °C, it suits SMT applications in automotive electronics due to AEC-Q200 compliance and 0.063 W power dissipation.
M85049/85-08W02
Amphenol
CIRCULAR CONN ACCESSORY; Shell Sizes: 8; 9; IEC Conformity: NO; MIL-Connector Accessory Name: BAND LOCK ADAPTER; MIL Conformity: YES; DIN Conformity: NO;
LM317T
Inchange Semiconductor
Other Regulators; No. of Terminals: 3; Surface Mount: NO; Technology: BIPOLAR; Minimum Output Voltage-1: 1.2 V; No. of Outputs: 1;
2N2222A
North American Philips Discrete Products Div
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
SN65HVD230DR
SN65HVD230DR by Texas Instruments is a BICMOS technology interface circuit with 1Mbps data rate, suitable for industrial applications. It operates at 3.3V, has 8 terminals in a small outline package, and can withstand temperatures from -40 to 85°C.
BAV99
Taiwan Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3.5 ohm; Maximum Drain Current (ID): .2 A; Peak Reflow Temperature (C): NOT SPECIFIED;
BAV99WT1G
BAV99WT1G by Onsemi is a series connected diode with 0.006 us reverse recovery time. It is a small outline rectifier diode with 70V peak reverse voltage, ideal for surface mount applications in electronics requiring fast switching and low forward voltage drop.
1N4148
Lite-on Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
FT232RQ-REEL
FTDI
FTDI's FT232RQ-REEL is a USB bus controller with 32 terminals, operating at 3.3-5.25V. It supports data transfer rates up to 60MBps and clock frequency of 12.02MHz, suitable for RS232/RS422/RS485 interfaces in various applications like industrial automation and communication systems.
1N4148WS
Multicomp Pro
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
87832-1420
Molex
87832-1420 by Molex is a 14-contact board connector with 0.079" pitch, suitable for commercial applications. It features matte tin over nickel finish, glass-filled polyamide insulator, and polarization key for easy assembly. Withstanding voltage of 1400VAC and operating temperature range from -55 to 105°C make it reliable for various electronic devices.
BSS138PS,115
NXP Semiconductors
NXP Semiconductors' BSS138PS,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A max drain current. Ideal for switching applications, it features a 1.6 ohm max on-resistance and operates in enhancement mode. The transistor comes in a small outline package with GULL WING terminals, making it suitable for surface mount designs.
SMBJ18CA
Eic Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
Surge Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
261
New England Microwave
Other Interface ICs; No. of Terminals: 14; Package Equivalence Code: FL14(UNSPEC); Power Supplies (V): +-5,-15; Package Body Material: PLASTIC/EPOXY; Surface Mount: YES;
A6S-7101
Omron
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; null: ON-OFF; null: 7; Body Length/Diameter: 18.72 mm; null: SPST;
219-4ESJF
Cts
219-4ESJF by Cts is a DIP & SIP switch with POLYETHYLENE housing, GOLD plating, and BERYLLIUM COPPER contacts. It has 4 switch sections, SPST function, and operates b/w -55 to 85 °C. Ideal for OFF-ON applications with 2000 cycles electrical life and 1000000000 ohm insulation resistance.
2-1825059-5
TE Connectivity
TE Connectivity 2-1825059-5 is a SPST slide DIP switch with 6 positions and 1000 cycles electrical life. Featuring polyphenylene sulfide housing, copper alloy terminals, and gold-plated center contacts, it operates b/w -30°C to 85°C. Ideal for panel mounting applications requiring a compact design and reliable switching performance.
A6S-0102-PMH
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; Maximum Contact DC Rating (R Load): 0.025A@24VDC; JESD-609 Code: e4; Electrical Life: 1000 Cycle(s); Insulation Resistance: 100000000 ohm;
1825280-1
TE Connectivity's 1825280-1 is a Slide DIP Switch with SPDT function. It has an extended top actuator, sealed with epoxy for durability. With a max DC contact current of 0.1A@12VDC, it is ideal for panel mounting applications in electronics.
A6HF-2102-P
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; Maximum DC Contact Current: .025 A; null: 2; Body Width: 3.67 inch; JESD-609 Code: e4;
BD04
Itt Cannon
ITT Cannon's BD04 is a SPST slide DIP switch with 4 sections, 4 positions, and 8 PCB holes. Featuring bronze terminals, it has an electrical life of 10k cycles and insulation resistance of 1G ohm. With a temperature range from -40 to 85°C, it is ideal for applications requiring latched ON-OFF contact functions in various industries.
A6TN-3104
DIP Switches; Mounting Feature: THROUGH HOLE-STRAIGHT; null: 3; Maximum Contact DC Rating (R Load): .025A@24VDC; Body Height: 4.25 mm; Electrical Life: 1000 Cycle(s);
A6HF-8102-P
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; null: 8; Minimum Operating Temperature: -30 Cel; JESD-609 Code: e4; Body Height: 2.2 mm;
A6SR-6101
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; Packing Method: TUBE; Contact Resistance: 200 mohm; Maximum Contact DC Rating (R Load): 0.025A@24VDC; Maximum DC Contact Voltage: 24 V;
A6SN-7104-P
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; null: RAISED TYPE; Maximum DC Contact Current: .025 A; null: LATCHED; null: SLIDE DIP SWITCH;
CHS-01TB
Nidec Copal Electronics
Nidec Copal Electronics' CHS-01TB is a waterproof SPST slide DIP switch with gold-plated contacts. It offers 2000 cycles electrical life, 1000000000 ohm insulation resistance, and operates b/w -40 to 85 °C. Ideal for applications requiring a latched switch action in surface mount configurations.
1825057-3
TE Connectivity 1825057-3 is a SPST slide DIP switch with 4 positions. It features polyphenylene sulfide housing, copper alloy terminals, and gold over nickel plating. Ideal for applications requiring a latched switch action, such as in PCBs for consumer electronics.
1-1571983-5
TE Connectivity's 1-1571983-5 is a DIP switch with POLYPHENYLENE SULPHIDE housing and COPPER ALLOY terminals. Featuring SPST function, GOLD OVER NICKEL plating, and 1000 cycle electrical life, it is ideal for applications requiring a reliable slide DIP switch with 2 positions.
NDS-08V
Diptronics Manufacturing
NDS-08V by Diptronics is a 8-section SPST slide DIP switch with gold (Au) terminals. It has a body size of 21.68mm x 9.9mm x 5.85mm and can handle 0.025A@24VDC current rating. Ideal for through-hole mounting applications requiring latched switch action in electronics projects.
DS04-254-2-02BK-SMT-TR
Cui Devices
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; Maximum Operating Temperature: 85 Cel; Packing Method: TR, 13 INCH; Maximum DC Contact Current: .025 A; null: FLAT;
A6H-0101-P
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; null: SPST; Termination Type: SOLDER; Maximum Contact DC Rating (R Load): .025A@24VDC; null: LATCHED;
A6TR-4101
DIP Switches; Mounting Feature: THROUGH HOLE-STRAIGHT; Packing Method: TUBE; Maximum Contact DC Rating (R Load): .025A@24VDC; Maximum DC Contact Current: .025 A; Manufacturer Series: A6TR;
90HBW03PT
Grayhill
The Grayhill 90HBW03PT is a DIP switch with POLYETHYLENE housing, COPPER ALLOY terminals, and GOLD plating. It has 3 switch sections, SPST function, and 2000 cycles electrical life. Ideal for applications requiring moisture-proof sealing, it operates b/w -40 to 85 °C with a max DC voltage of 6V.
218-6LPST
218-6LPST by Cts is a DIP & SIP switch with 6 sections, SPST function, and gold plating. It has a body width of 8.43in and terminal material made of copper alloy. Ideal for applications requiring OFF-ON contact function, with max DC rating of 0.1A@50VDC.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
3-5435640-6
DIP Switches; Mounting Feature: THROUGH HOLE-RIGHT ANGLE; Packing Method: TUBE; null: 5; null: GLASS FILLED POLYESTER; null: 5;
Tyco Electronics Alcoswitch
DIP Switches; Mounting Feature: THROUGH HOLE-STRAIGHT; null: 5; null: SPST; Termination Type: SOLDER; Body Length/Diameter: 14.73 mm;
3-5435640-9
TE Connectivity 3-5435640-9 is a DIP switch with 8 sections, SPST function, and white actuator. It has copper alloy terminals, gold over nickel plating, and operates b/w -55 to 105 °C. Ideal for applications requiring ON-OFF contact function in electronic devices.
3-5435640-5
TE Connectivity 3-5435640-5 is a SPST slide DIP switch with 4 sections, 1A max AC/DC current, and 40V max DC voltage. Made of glass-filled polyester, it has top rocker actuator and copper alloy contacts. Ideal for applications requiring latched switch action in through-hole mounting setups.
DIP Switches; Mounting Feature: THROUGH HOLE-STRAIGHT; Body Width: 9.65 inch; null: LATCHED; Body Length/Diameter: 12.19 mm; Body Height: 7.37 mm;
3-5435640-0
DIP Switches; Mounting Feature: THROUGH HOLE-RIGHT ANGLE; null: SLIDE DIP SWITCH; null: TOP ROCKER; Maximum DC Contact Current: 1 A; End Contact Material: COPPER ALLOY;
DIP Switches; Mounting Feature: THROUGH HOLE-STRAIGHT; null: 3; Termination Type: SOLDER; Body Height: 7.37 mm; null: LATCHED;
3-5435668-1
DIP Switches; Mounting Feature: THROUGH HOLE-STRAIGHT; Sealing: TAPE SEALED; null: LATCHED; Additional Features: LOW PROFILE; null: 11;
3-5435668-2
DIP Switches; Mounting Feature: THROUGH HOLE-STRAIGHT; null: SPST; Body Width: 9.65 inch; Body Height: 7.49 mm; Sealing: TAPE SEALED;
3-5435640-7
DIP Switches; Mounting Feature: THROUGH HOLE-STRAIGHT; null: 6; Body Width: 9.65 inch; null: LATCHED; null: SLIDE DIP SWITCH;
3-5435668-5
DIP Switches; Mounting Feature: THROUGH HOLE-STRAIGHT; Additional Features: LOW PROFILE; null: SPST; Body Length/Diameter: 14.73 mm; null: LATCHED;
3-5435640-2
DIP Switches; Mounting Feature: THROUGH HOLE-STRAIGHT; Termination Type: SOLDER; null: LATCHED; null: SLIDE DIP SWITCH; null: 12;
3-5435640-8
DIP Switches; Mounting Feature: THROUGH HOLE-STRAIGHT; null: SLIDE DIP SWITCH; Termination Type: SOLDER; null: LATCHED; Body Height: 7.37 mm;
3-5435668-0
DIP Switches; Mounting Feature: THROUGH HOLE-STRAIGHT; Termination Type: SOLDER; Body Height: 7.49 mm; Body Length/Diameter: 27.43 mm; Additional Features: LOW PROFILE;
3-5435668-3
DIP Switches; Mounting Feature: THROUGH HOLE-STRAIGHT; null: SLIDE DIP SWITCH; Sealing: TAPE SEALED; Body Height: 7.49 mm; Additional Features: LOW PROFILE;
3-5435668-4
DIP Switches; Mounting Feature: THROUGH HOLE-STRAIGHT; null: SLIDE DIP SWITCH; Sealing: TAPE SEALED; Body Length/Diameter: 12.19 mm; Termination Type: SOLDER;
DIP Switches; Mounting Feature: THROUGH HOLE-STRAIGHT; null: 11; Additional Features: LOW PROFILE; null: LATCHED; Body Length/Diameter: 29.97 mm;
DIP Switches; Mounting Feature: THROUGH HOLE-STRAIGHT; null: SLIDE DIP SWITCH; Body Width: 9.65 inch; null: LATCHED; Body Length/Diameter: 32.51 mm;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved