Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
KEYPAD SWITCH; Mounting Feature: SURFACE MOUNT-STRAIGHT; Switch Function: SPST; Packing Method: TAPE AND REEL; Maximum DC Contact Current: .05 A; Maximum Operating Force: 1.47 N;
Median Price
$0.190
Lifecycle Status
Suppliers In-Stock
16
In-Stock Inventory
1k+
DigiKey
1+ parts
$0.390
100+ parts
$0.310
1k+ parts
$0.240
10k+ parts
Mouser Electronics
$0.410
$0.305
$0.266
$0.209
Master Electronics
-
$0.192
Powell Electronics
$0.176
Verical
$0.189
Chip1Stop
$0.142
Farnell
$0.226
Arrow
$0.185
TME
$0.220
$0.183
$0.180
Nova Conductors
$0.222
VNN
Vyrian
Rapid Electronics
$0.130
Bristol Electronics
Electro Sonic
IBS Electronics
$0.196
Semicontronic
$0.121
$0.118
$0.117
Bastille Electronics
$0.211
$0.200
$0.198
Argo Parts USA
$0.216
Continental Prestige Electronics
$0.218
Aztec Data Supply Inc.
$4.680
Assy Fe
Perfect Parts
Authorized Procurement Solutions
Keypad Switches 1571527-2 attributes and parameters. Explore more Keypad Switches devices from Tyco Electronics Alcoswitch
Body Width:
Body Height:
Body Length/Diameter:
Circuit Config:
Maximum DC Contact Current:
DC Maximum Rating R Load (Contact):
Maximum DC Contact Voltage:
Electrical Life:
JESD-609 Code:
Manufacturer Series:
Mounting Feature:
No. of Switches:
Maximum Operating Force:
Maximum Operating Temperature:
Minimum Operating Temperature:
Packing Method:
Switch Action:
Switch Function:
Switch Type:
Terminal Finish:
Termination Type:
1571527-2 Switches trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.50.90.40
SB
Product Change Notification (PDF)
1N4148
Sun Wai Electronic
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Reverse Recovery Time: .004 us; Maximum Repetitive Peak Reverse Voltage: 100 V;
FDC5614P
TAIZHOU ELECTRONICS CO LTD
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.92 W; Maximum Operating Temperature: 150 Cel; Package Body Material: PLASTIC/EPOXY;
1N4148WT
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Protek Devices
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
AT90CAN128-16AUR
Microchip Technology
AT90CAN128-16AUR by Microchip: 16 MHz clock, 8-bit data RAM, and 131072 ROM words. Ideal for industrial applications with CAN, SPI, TWI connectivity and low power mode. Contains 4 timers, 8 ADC channels, and supports up to 10-bit analog to digital conversion.
LL4148
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LAN8720AI-CP-TR
LAN8720AI-CP-TR by Microchip is an Ethernet transceiver with 100 Mbps data rate, operating at -40 to 85 °C. It features a 3.3 V supply voltage, 54 mA supply current, and TS 16949 screening level. Ideal for network interfaces in industrial applications due to its compact square package and low profile design.
2N2222A
Taitron Components
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; No. of Terminals: 3;
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Shanghai Lunsure Electronic Technology
RECTIFIER DIODE; Surface Mount: NO; Maximum Forward Voltage (VF): 1 V; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Config: SINGLE;
BSS138LT1G
Onsemi
BSS138LT1G by Onsemi is a N-CHANNEL FET with 50V DS Breakdown Voltage, 0.2A Drain Current, and 3.5 ohm On Resistance. Ideal for SWITCHING applications due to its ENHANCEMENT MODE operation and built-in DIODE. Operates b/w -55 to 150 °C with small outline package style for surface mount assembly.
BAV99
Taiwan Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
M85049/85-08W02
TE Connectivity
CONNECTOR ACCESSORY; Minimum Operating Temperature: -65 Cel; Wire Gauge (AWG): 0; Maximum Wire Size: 0 AWG; Maximum Operating Temperature: 175 Cel; Material: ALUMINUM ALLOY;
Glenair
CONNECTOR ACCESSORY; MIL Conformity: YES; Material: ALUMINIUM ALLOY; Associated Backshell Military - Specifications: MIL-DTL-38999; Shell Sizes: 08; DIN Conformity: NO;
2N7002
Vishay Intertechnology
2N7002 by Vishay Intertechnology is a N-CHANNEL FET with 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. Ideal for SWITCHING applications due to its SINGLE configuration with BUILT-IN DIODE. Operates in ENHANCEMENT MODE, suitable for surface mount with GULL WING terminals.
Changzhou Starsea Electronics
Micro Commercial Components
IRLML6402TRPBF
International Rectifier
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.3 W; Peak Reflow Temperature (C): 260; Package Style (Meter): SMALL OUTLINE;
Sinyork
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Operating Temperature: 85 Cel; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Operating Mode: ENHANCEMENT MODE;
1825027-8
TE Connectivity 1825027-8 is a BLUE BUTTON TYPE KEYPAD SWITCH with NYLON housing and COPPER ALLOY terminals. It has an electrical life of 100000 cycles, insulation resistance of 100M ohm, and operates b/w -20 to 105 °C. Ideal for PANEL MOUNT applications requiring MOMENTARY-TACTILE OFF-(ON) contact function.
3FSH9R
Apem Components
The Apem Components 3FSH9R is a keypad switch with POLYPHENYLENE SULPHIDE housing, IP67 sealing, and SPST switch function. It has a max operating temperature of 160°C and min of -40°C. Ideal for applications requiring a momentary pushbutton switch with surface mount-straight mounting feature.
SKHHCRA010
Alps Alpine
Alps Alpine SKHHCRA010 is a YELLOW keypad switch with 200000 cycles electrical life. With 0.25mm actuator travel, it operates b/w -40 to 90 °C and has a max force of 5.1N. Ideal for applications requiring momentary-tactile switch action and stem actuator type on PCBs with 4 holes.
3-1825910-3
TE Connectivity 3-1825910-3 is a YELLOW keypad switch with NYLON housing. It has an electrical life of 50k cycles, SPST switch function, and operates b/w -35 to 85°C. Ideal for panel mounting applications requiring momentary switch action with 0.05A@24VDC DC max rating.
430471025826
Wuerth Elektronik & Kg
430471025826 by Wurth Elektronik is a white keypad switch with stainless steel housing. It has SPST switch function, 0.25mm actuator travel, and 3.04N max operating force. Ideal for applications requiring a momentary keypad switch with high electrical life and insulation resistance.
3FTH920
KEYPAD SWITCH;
EVQQ2S02W
Panasonic
EVQQ2S02W by Panasonic is a white keypad switch with stainless steel housing. It features SPST switch function, 1000000 cycle electrical life, and 100000000 ohm insulation resistance. Ideal for applications requiring momentary ON-OFF contact function with a max operating force of 1.6 N and snap action contact timing.
1825910-2
TE Connectivity's 1825910-2 is a black nylon keypad switch with SPST switch function. It has a max operating temperature of 85°C and a min operating temperature of -35°C. This panel mount switch is commonly used in applications requiring momentary action and solder termination.
1301.9315.24
Schurter Ag
1301.9315.24 by Schurter Ag is a SPST Keypad Switch with 100000 cycles electrical life, 2.1N max operating force, and IP40 sealing. Ideal for applications requiring momentary-tactile switch action in environments with temperatures ranging from -20°C to 70°C.
KMR232NGULCLFS
C & K Components
KMR232NGULCLFS by C & K Components is a SPST keypad switch with 300000 cycles electrical life and 1VA@32VDC DC max power rating. It has a sealing of IP40, suitable for applications requiring momentary-tactile switch action in environments with temperatures ranging from -40 to 85 °C.
5GTH93522
The Apem Components 5GTH93522 keypad switch features a POLYPHENYLENE SULPHIDE housing, COPPER TIN ALLOY terminals, and GREEN LED illumination. With an IP67 sealing rating, it is ideal for applications requiring a SPST switch function in environments with temperatures ranging from -30 to 85 °C. The switch offers a max DC contact voltage of 24V and an electrical life of 10M cycles.
KT11B2JM
KEYPAD SWITCH; Mounting Feature: SURFACE MOUNT-STRAIGHT; Switch Function: SPST; Contact Function: OFF-(ON); Solderability: MIL-STD; Contact Timing: MAKE-BEFORE-BREAK;
6425.0101
Marquardt
Marquardt 6425.0101 is a SPST keypad switch with 100000000 ohm insulation resistance, 1.397mm actuator travel, and 0.7N max operating force. Ideal for applications requiring momentary switch action in temperatures ranging from -20 to 70°C.
D6R40F1LFS
Itt Cannon
D6R40F1LFS by ITT Cannon is a red keypad switch with SPST function. It has an electrical life of 250,000 cycles and a max DC contact voltage of 32V, making it suitable for applications requiring momentary-tactile switch action. With a compact body height of 5.8mm and actuator travel of 2mm, it is ideal for use in devices where space is limited.
1241.1082.51
Schurter Ag's 1241.1082.51 Keypad Switch offers SPST switch function, 1000000 cycles electrical life, and IP40 sealing. Ideal for applications requiring a momentary-tactile switch with 3N max operating force and 0.125A@48VDC DC rating.
TS03-66-95-BK-260-LCR-D-67
Cui Devices
TS03-66-95-BK-260-LCR-D-67 by CUI Devices is a SPST Keypad Switch with IP67 sealing, suitable for applications requiring durability. It offers an electrical life of 60000 cycles, insulation resistance of 100M ohm, and a max operating force of 2.55N. Ideal for environments with temperatures ranging from -30 to 80°C, this switch features a stem actuator in yellow color and polyamide66 housing material.
1301.9316.24
1301.9316.24 by Schurter Ag is a SPST Keypad Switch with 100000 cycles Electrical Life, 2.1N Max Operating Force, and IP40 Sealing. Ideal for applications requiring a MOMENTARY-TACTILE switch type in surface mount-straight mounting configuration at temperatures ranging from -20°C to 70°C.
DTSM-65N-V-T/R
The Apem Components DTSM-65N-V-T/R is a brown keypad switch with SPST function, 200000 cycle electrical life, and 2.06N max operating force. Ideal for surface mount applications requiring momentary-tactile switch action at temperatures ranging from -25°C to 70°C.
4FTH922
The Apem Components 4FTH922 keypad switch has an electrical life of 10M cycles, GREEN LED illumination, and IP67 sealing. Ideal for applications requiring a SPST switch with a max DC contact voltage of 24V, such as industrial control panels or outdoor electronic devices.
PTS645SM43SMTR92LFS
PTS645SM43SMTR92LFS by C & K Components is a SPST keypad switch with 100000 cycles electrical life, 100000000000 ohm insulation resistance, and 1.57N max operating force. Ideal for applications requiring momentary-tactile switch action in environments with temperatures ranging from -20 to 60°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
1571563-4
Tyco Electronics Alcoswitch
KEYPAD SWITCH; Mounting Feature: SURFACE MOUNT-STRAIGHT; Switch Function: SPST; JESD-609 Code: e4; Terminal Finish: Silver (Ag); Body Length/Diameter: 6 mm;
TE Connectivity 1571563-4 Keypad Switch features SPST switch function, 100000 cycles electrical life, and 2.548N max operating force. Ideal for panel mount applications with -35 to 85°C temp range and 0.05A@24VDC DC rating.
1571527-2
KEYPAD SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPST; Switch Action: MOMENTARY-TACTILE; Body Length/Diameter: 6 mm; Length (Actuator): .028 inch;
1571407-2
KEYPAD SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPST; Center Contact Plating: SILVER; Maximum DC Contact Current: .05 A; Length (Actuator): .063 inch;
1571610-2
KEYPAD SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPST; Type (Actuator): BUTTON TYPE; Body Color: BLACK; Maximum Operating Force: 1.274 N;
1571528-1
KEYPAD SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPST; Material (Actuator): SILICON RUBBER; Color (Actuator): BLACK; Maximum AC Contact Current: .05 A;
1571220-1
KEYPAD SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPST; Material (Actuator): POLYETHYLENE; Body Width: 12 inch; Sealing: IP67;
KEYPAD SWITCH; Mounting Feature: THROUGH HOLE-STRAIGHT; Switch Function: SPST; Maximum Contact Bounce Time: 20 ms; Minimum Operating Temperature: -35 Cel; Electrical Life: 1000000 Cycle(s);
1571386-3
KEYPAD SWITCH; Mounting Feature: THROUGH HOLE-RIGHT ANGLE; Switch Function: SPST; Type (Actuator): ROUND/EXTENDED TYPE; Maximum Operating Force: .98 N; Circuit Config: 1X1;
1571527-1
KEYPAD SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPST; Color (Actuator): BROWN; Body Width: 6 inch; Termination Type: SOLDER;
1571563-1
KEYPAD SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPST; Termination Type: SOLDER; Minimum Operating Temperature: -35 Cel; End Contact Material: COPPER ALLOY;
1571563-2
KEYPAD SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPST; DC Maximum Rating R Load (Contact): .05A@24VDC; Electrical Life: 1000000 Cycle(s); Packing Method: TR;
1571563-3
KEYPAD SWITCH; Mounting Feature: SURFACE MOUNT-STRAIGHT; Switch Function: SPST; Electrical Life: 100000 Cycle(s); Manufacturer Series: 1571563; Body Width: 6 inch;
KEYPAD SWITCH; Mounting Feature: SURFACE MOUNT-STRAIGHT; Switch Function: SPST; Packing Method: BULK; Electrical Life: 1000000 Cycle(s); Minimum Operating Temperature: -35 Cel;
KEYPAD SWITCH; Mounting Feature: SURFACE MOUNT-STRAIGHT; Switch Function: SPST; Minimum Operating Temperature: -35 Cel; Body Length/Diameter: 6 mm; Termination Type: SOLDER;
1571010-1
KEYPAD SWITCH; Mounting Feature: THROUGH HOLE-STRAIGHT; Switch Function: SPST; Body Length/Diameter: 6.19 mm; Electrical Life: 100000 Cycle(s); Maximum Operating Force: 2.06 N;
KEYPAD SWITCH; Mounting Feature: SURFACE MOUNT-STRAIGHT; Switch Function: SPST; Terminal Finish: Silver (Ag); Body Width: 6 inch; Maximum DC Contact Current: .05 A;
KEYPAD SWITCH; Mounting Feature: SURFACE MOUNT-STRAIGHT; Switch Function: SPST; Maximum Operating Temperature: 85 Cel; Maximum DC Contact Current: .05 A; No. of Switches: 1;
1571295-1
KEYPAD SWITCH; Mounting Feature: THROUGH HOLE-STRAIGHT; Switch Function: SPST; Type (Actuator): ROUND/EXTENDED TYPE; Manufacturer Series: 1571295; JESD-609 Code: e4;
1571407-1
KEYPAD SWITCH; Mounting Feature: SURFACE MOUNT-RIGHT ANGLE; Switch Function: SPST; Type (Actuator): ROUND/EXTENDED TYPE; Maximum DC Contact Voltage: 24 V; Sealing: IP67;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved