Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
GQ8ALF023570BAT by Tt Electronics Plc is a thin film resistor array with 8 functions, each with 357 ohm resistance. It has a power dissipation of 0.1W and operates b/w -55 to 125 °C. Ideal for surface mount applications requiring precise resistance values in isolated networks.
Median Price
$3.010
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
< 1k
Nova Conductors
1+ parts
100+ parts
-
1k+ parts
10k+ parts
Vyrian
Argo Parts USA
Continental Prestige Electronics
$2.950
Netroflash
AZTECH Wire
$14.878
The low power dissipation makes this resistor network efficient and energy-saving.
Suitable for use in a wide range of temperature environments.
Provides a specific resistance value for precise circuit design.
Thin film technology offers high precision and stability in resistance values.
Isolated network design prevents interference between resistors, ensuring accurate performance.
Surface mount technology allows for easy and convenient installation.
The low tolerance level ensures accurate resistance matching in the network.
Can handle high operating voltages, making it versatile for various applications.
Resistor Networks & Arrays GQ8ALF023570BAT attributes and parameters. Explore more Resistor Networks & Arrays devices from Tt Electronics Plc
Construction:
Element Power Dissipation:
First Element Resistance:
JESD-609 Code:
Mounting Type:
Network Type:
No. of Elements:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Height (Package):
Length (Package):
Package Style (Meter):
Width (Package):
Packing Method:
Rated Power Dissipation (P):
Rated Temperature:
Resistance:
Resistor Type:
Second or Last Element Resistance:
Size Code:
Technology:
Temperature Coef (ppm/Cel):
Terminal Finish:
Terminal Shape:
Tolerance:
Operating Voltage:
GQ8ALF023570BAT Resistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8533.21.00.20
SB
8533.21.00.25
Our primary focus areas for growth and investment are in the end markets of healthcare, aerospace & defence, and automation & electrification which includes products that address resource scarcity, improve energy efficiency, support renewables and drive productivity, connectivity and health.
2N7002
Changzhou Galaxy Century Microelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Minimum DS Breakdown Voltage: 60 V; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; No. of Terminals: 3;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
FDC5614P
Onsemi
FDC5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 20A Max IDM and 0.105 ohm RDS(ON), operating in ENHANCEMENT MODE at -55 to 150 °C. This SMALL OUTLINE transistor has a built-in diode, GULL WING terminals, and METAL-OXIDE SEMICONDUCTOR technology.
L7805CV
Sgs-ates Componenti Electronici S P A
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Terminal Finish: Tin/Lead (Sn/Pb); Nominal Output Voltage-1: 5 V;
SS14
Jgd Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Technology: SCHOTTKY; Maximum Non Repetitive Peak Forward Current: 30 A; Maximum Forward Voltage (VF): .55 V; No. of Phases: 1;
Cheng-yi Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Compensated Devices
RECTIFIER DIODE; Terminal Position: UPPER; Terminal Form: NO LEAD; No. of Terminals: 1; Surface Mount: YES; Package Shape: SQUARE;
LM358N
Silicon Group
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
2N2222A
Surge Components
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; No. of Terminals: 3;
BAV99
Vishay Sprague
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Toshiba
Sun Wai Electronic
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Reverse Recovery Time: .004 us; Maximum Repetitive Peak Reverse Voltage: 100 V;
LL4148
Continental Device India
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
General Semiconductor
SMBJ18CA
Alpha & Omega Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Weitron Technology
RECTIFIER DIODE; Surface Mount: NO; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Output Current: .15 A; Terminal Finish: Tin/Lead (Sn/Pb);
1N4148WS
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Rectron
Supertex
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; No. of Elements: 1; Maximum Feedback Capacitance (Crss): 5 pF;
4814P-2-203
Bourns
Bourns 4814P-2-203 resistor network features 13 elements with 20k ohm resistance, 1.27mm lead spacing, and 0.08W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and operating voltage of 50V. Temperature coefficient tracking at 50 ppm/C ensures stable performance from -55°C to 125°C.
4608X-101-472LF
Bourns 4608X-101-472LF resistor network features 7 elements with 4700 ohm resistance, 2% tolerance, and 100V operating voltage. Ideal for applications requiring precise resistance values in a compact SIP package with through-hole mounting.
RM2012B103/403PBVW10
Thin Film Technology
RM2012B103/403PBVW10 by Thin Film Technology is a 0.1W resistor array with two functions, 10000 ohm and 40000 ohm resistances. It has a tolerance of 0.1% and temperature coefficient tracking of 5 ppm/°C. Ideal for applications requiring precise resistance values in compact surface mount packages.
M8340105K1003JC
Defense Logistics Agency
ARRAY/NETWORK RESISTOR; Mounting Type: THROUGH HOLE MOUNT; Resistance: 100000 ohm; Rated Power Dissipation (P): 1 W; Maximum Operating Temperature: 125 Cel; Tolerance: 5 %;
CAT16-223J4LF
CAT16-223J4LF by Bourns is a resistor network with 4 functions, 22000 ohm resistance, and 0.0625 W power dissipation. Ideal for surface mount applications in electronics requiring isolated networks with 5% tolerance and operating voltage of 50 V.
MCRNLA10G0103B0E
SPC TECHNOLOGY/ MULTICOMP
MCRNLA10G0103B0E by Spc Technology/Multicomp is a 9-element resistor network with 10000 ohm resistance, rated for temperatures b/w -55 to 125 °C. It has a tolerance of 2%, operates at 100V, and dissipates 0.125W power. Ideal for applications requiring precise resistance values in a compact through-hole mounting package.
CAY16-101J4LF
Bourns CAY16-101J4LF is a 100 ohm resistor array with 4 functions, rated at 0.0625W power dissipation. Ideal for surface mount applications, it operates b/w -55 to 125 °C and has a tolerance of 5%. Its metal glaze/thick film technology makes it suitable for various electronic circuits requiring isolated resistance networks.
LT5400BCMS8E-5#PBF
Linear Technology
ARRAY/NETWORK RESISTOR; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 85 Cel; Tolerance: 7.5 %; Network Type: ISOLATED; Operating Voltage: 75 V;
YC124-JR-071ML
Yageo
YC124-JR-071ML by Yageo is a 4-function resistor array with resistance of 1000000 ohm, operating voltage of 25V, and rated power dissipation of 0.0625W. Ideal for surface mount applications in automotive electronics due to AEC-Q200 reference standard compliance.
CAY10-103J4AS
The Bourns CAY10-103J4AS is a resistor network with 4 functions, each having a resistance of 10000 ohm. It has a power dissipation of 0.063 W and operates b/w -55 to 125 °C. Ideal for applications requiring isolated network resistors in compact SMT packages.
RM2012B102/103PBVW10
RM2012B102/103PBVW10 by Thin Film Technology is a 0.1W resistor array with 2 functions, offering resistances of 1000 ohm and 10000 ohm with a tolerance of 0.1%. Its thin film technology provides precise tracking at 5 ppm/°C, making it ideal for applications requiring isolated networks in surface mount configurations.
EXBA10P103J
Panasonic
The Panasonic EXBA10P103J is a resistor network with 8 elements, each having a resistance of 10000 ohm and a tolerance of 5%. It operates at temperatures ranging from -55 to 125 °C and has a power dissipation of 0.063 W. This SMT package is suitable for applications requiring precise resistance values in compact electronic circuits.
USVD2-A10M-010-02
Caddock Electronics
The Caddock Electronics USVD2-A10M-010-02 is a Metal Glaze/Thick Film resistor array with 2 functions, offering resistance of 9990000 ohm and 10000 ohm. It operates at temperatures from -40 to 85 °C and voltage up to 1400 V, making it ideal for precision applications requiring high tolerance levels. With a through-hole mounting style and isolated network type, this rectangular package resistor is suitable for various electronic circuits.
Analog Devices
LT5400BCMS8E-5#PBF by Analog Devices is a 4-function isolated resistor array with 0.8W power dissipation. Featuring 1ppm/°C temperature coef tracking, it has a resistance of 1000000 ohm and operates b/w -40 to 85 °C. Ideal for applications requiring precise resistance values in compact designs.
Y5076V0030BQ0L
Vishay Intertechnology
Vishay Intertechnology Y5076V0030BQ0L is a 2000 ohm resistor array with 0.1% tolerance and 2.54 mm lead spacing. Ideal for PCB mounting, it operates b/w -55 to 125 °C, making it suitable for precision voltage divider applications.
EXB28VR000X
The Panasonic EXB28VR000X is a resistor network with 4 functions, METAL GLAZE/THICK FILM technology, and 0 ohm resistance. It is used in applications requiring a temperature range of -55 to 125 °C, SMT package style, and AEC-Q200 reference standard compliance.
YC248-JR-072K2L
The Yageo YC248-JR-072K2L is a resistor network with 8 functions, each with a resistance of 2200 ohm and a tolerance of 5%. It operates b/w -55 to 155 °C, making it suitable for automotive applications due to its AEC-Q200 reference standard. This SMT package has a size code of 0616 and can handle up to 50V.
CAY16-681J4LF
Bourns CAY16-681J4LF is a 680 ohm resistor network with 8 terminals, rated for 0.0625W power dissipation at temperatures from -55 to 125°C. Ideal for surface mount applications in electronics requiring isolated networks with a tolerance of 5%.
VSSR1603102JTF
Vishay Intertechnology's VSSR1603102JTF is a 8-function resistor network with 1000 ohm resistance, 5% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in electronics requiring precise resistance values and compact design. Operating temperature range from -55 to 150 °C makes it suitable for various industrial and consumer electronic devices.
744C083270JP
Cts
744C083270JP by Cts is a resistor network with 4 functions, isolated network type, and resistance of 27 ohm. It features a power dissipation of 0.125 W, operating voltage of 200 V, and surface mounting type. Ideal for applications requiring precise resistance values in compact electronic devices.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
GQ8ALF013570BAT
Tt Electronics Plc
ARRAY/NETWORK RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 357 ohm; Rated Power Dissipation (P): .75 W; Maximum Operating Temperature: 125 Cel; Tolerance: .1 %;
GQ8ALF033570BAT
GQ8ALF023570BATHR
GQ8ALF023570CATHR
ARRAY/NETWORK RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 357 ohm; Rated Power Dissipation (P): .75 W; Maximum Operating Temperature: 125 Cel; Tolerance: .25 %;
GQ8ALF023572DAT
ARRAY/NETWORK RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 35700 ohm; Rated Power Dissipation (P): .75 W; Maximum Operating Temperature: 125 Cel; Tolerance: .5 %;
GQ8ALF023572FARHR
ARRAY/NETWORK RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 35700 ohm; Rated Power Dissipation (P): .75 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
GQ8ALF023570BAR
GQ8ALF023570CARHR
GQ8ALF023570DAR
ARRAY/NETWORK RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 357 ohm; Rated Power Dissipation (P): .75 W; Maximum Operating Temperature: 125 Cel; Tolerance: .5 %;
GQ8ALF023570DARHR
GQ8ALF023571CAT
ARRAY/NETWORK RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 3570 ohm; Rated Power Dissipation (P): .75 W; Maximum Operating Temperature: 125 Cel; Tolerance: .25 %;
GQ8ALF023571CATHR
GQ8ALF023572CAR
ARRAY/NETWORK RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 35700 ohm; Rated Power Dissipation (P): .75 W; Maximum Operating Temperature: 125 Cel; Tolerance: .25 %;
GQ8ALF023572FAT
GQ8ALF023570CAR
GQ8ALF023571BATHR
ARRAY/NETWORK RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 3570 ohm; Rated Power Dissipation (P): .75 W; Maximum Operating Temperature: 125 Cel; Tolerance: .1 %;
GQ8ALF023572BAR
ARRAY/NETWORK RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 35700 ohm; Rated Power Dissipation (P): .75 W; Maximum Operating Temperature: 125 Cel; Tolerance: .1 %;
GQ8ALF023572BARHR
GQ8ALF023572CATHR
GQ8ALF023572BATHR
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved