Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
ARRAY/NETWORK RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 3570 ohm; Rated Power Dissipation (P): .75 W; Maximum Operating Temperature: 125 Cel; Tolerance: .25 %;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
Resistor Networks & Arrays GQ8ALF023571CATHR attributes and parameters. Explore more Resistor Networks & Arrays devices from Tt Electronics Plc
Construction:
Element Power Dissipation:
First Element Resistance:
JESD-609 Code:
Mounting Type:
Network Type:
No. of Elements:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Height (Package):
Length (Package):
Package Style (Meter):
Width (Package):
Packing Method:
Rated Power Dissipation (P):
Rated Temperature:
Resistance:
Resistor Type:
Second or Last Element Resistance:
Size Code:
Technology:
Temperature Coef (ppm/Cel):
Terminal Finish:
Terminal Shape:
Tolerance:
Operating Voltage:
GQ8ALF023571CATHR Resistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8533.21.00.20
SB
8533.21.00.25
Our primary focus areas for growth and investment are in the end markets of healthcare, aerospace & defence, and automation & electrification which includes products that address resource scarcity, improve energy efficiency, support renewables and drive productivity, connectivity and health.
SS14
Jgd Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Technology: SCHOTTKY; Maximum Non Repetitive Peak Forward Current: 30 A; Maximum Forward Voltage (VF): .55 V; No. of Phases: 1;
BSS123,215
NXP Semiconductors
NXP Semiconductors' BSS123,215 is a N-CHANNEL FET for SWITCHING applications. Features include 100V DS Breakdown Voltage, 0.17A Drain Current, and 6 ohm On Resistance. With GULL WING terminals and ENHANCEMENT MODE operation, it's ideal for small outline packages in various electronic devices.
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
2N2222A
Micro Commercial Components
Small Signal Bipolar Transistors; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JESD-609 Code: e0;
CRG0805F10K
Tyco Electronics Components
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
Zowie Technology
RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Operating Temperature: 125 Cel; No. of Elements: 1; Maximum Non Repetitive Peak Forward Current: 30 A;
1N4148WS
Vishay Intertechnology
Vishay Intertechnology's 1N4148WS is a single rectifier diode with a max forward voltage of 1V and output current of 0.15A. With a fast reverse recovery time of 0.004us, it operates up to 150°C. Ideal for applications requiring high-speed switching and low power consumption in surface mount configurations.
EU2B-YS303C
Idec
ROTARY SWITCH;
LM317T/NOPB
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; JESD-609 Code: e3; Package Shape: RECTANGULAR;
Rochester Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
AT90CAN128-16AU
Microchip Technology
AT90CAN128-16AU by Microchip Technology is a microcontroller with 8-bit data RAM and 16-bit address bus width. It operates at a max clock frequency of 16 MHz, making it suitable for industrial applications requiring low power mode and connectivity options like CAN, SPI, and USART. With 53 I/O lines and 8-channel 10-bit ADCs, this microcontroller offers versatile peripheral support for various embedded systems.
STM8S003F3P6TR
STMicroelectronics
STM8S003F3P6TR by STMicroelectronics is an 8-bit microcontroller with a max clock frequency of 16 MHz. It features 1024 RAM bytes, 128 data EEPROM size, and 5-ch 10-bit ADC channels. Ideal for industrial applications requiring low power mode and connectivity via I2C, SPI, and UART interfaces.
261
Deltrol Controls
Other Relays;
MBR130T1G
Onsemi
MBR130T1G by Onsemi is a Schottky rectifier diode with max output current of 1A and max repetitive peak reverse voltage of 30V. It operates b/w -65 to 125°C, suitable for surface mount applications in electronics requiring low forward voltage drop.
NC7WZ07P6X
The Onsemi NC7WZ07P6X is a logic gate with 2 functions, featuring a propagation delay of 4.8 ns at 1.8V supply voltage. With open-drain output characteristics, it operates in industrial temperatures from -40 to 85°C. Ideal for applications requiring fast signal processing and low power consumption in compact designs.
Tt Electronics Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; JESD-30 Code: O-MBCY-W3;
1N4148
Transys Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Digitron Semiconductors
MBRA160T3G
MBRA160T3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.51V. It operates b/w -55 to 150°C, has a reverse test voltage of 60V, and is ideal for power applications due to its high efficiency and small outline package style.
BAV99
Kec
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
EXB34V203JV
Panasonic
The Panasonic EXB34V203JV is a resistor network with 2 functions, each with a resistance of 20000 ohm and a power dissipation of 0.063 W. It features metal glaze/thick film technology, operates b/w -55 to 125 °C, and has a tolerance of 5%. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance.
YC124-JR-071ML
Yageo
YC124-JR-071ML by Yageo is a 4-function resistor array with resistance of 1000000 ohm, operating voltage of 25V, and rated power dissipation of 0.0625W. Ideal for surface mount applications in automotive electronics due to AEC-Q200 reference standard compliance.
4816P-T01-472LF
Bourns
Bourns 4816P-T01-472LF is a resistor network with 8 functions, 4700 ohm resistance, and 1.28 W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard compliance and isolated network type.
GS7ALF013570BAT
GS7ALF013570BAT by Tt Electronics Plc is a 0.1W resistor array with 7 functions, 357 ohm resistance, and 5 ppm/°C temperature coef tracking. Ideal for surface mount applications in isolated networks, it operates b/w -55 to 125 °C with a tolerance of 0.1%.
MPMT2002QTS
Vishay Intertechnology's MPMT2002QTS resistor network has 2 elements with 10k ohm resistance each. It offers a 0.1 W power dissipation and operates b/w -55 to 150 °C, making it ideal for precision voltage divider applications. With a temperature coefficient of 25 ppm/°C and 0.05% tolerance, this SOT-23 package is suitable for surface mount installations in various electronic devices.
741C083510JP
Cts
741C083510JP by Cts is a 4-function resistor array with 51 ohm resistance, rated for 70-125 °C. It uses METAL GLAZE/THICK FILM tech, SMT package style, and operates at 25V. Ideal for automotive applications due to AEC-Q200 standard compliance and -55 to 125 °C operating range.
4310R-101-223LF
Bourns 4310R-101-223LF is a resistor network with 9 elements, each rated at 22000 ohm resistance. It has a power dissipation of 0.2 W per element and operates in temperatures ranging from -55 to 125 °C. Ideal for applications requiring precise resistance values in compact spaces.
MAX5491WA30000+T
Maxim Integrated
ARRAY/NETWORK RESISTOR; Network Type: DIVIDER; Terminal Finish: MATTE TIN;
4816P-1-103LF
Bourns 4816P-1-103LF resistor network features 8 functions with 10000 ohm resistance, 50 ppm/°C temperature coef tracking, and 1.28 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 reference standard compliance.
741C083561JP
741C083561JP by Cts is a resistor network with 4 functions, resistance of 560 ohm, and rated power dissipation of 0.252 W. It features metal glaze/thick film technology, surface mounting type, and operates at temperatures from -55 to 125 °C. Ideal for automotive electronics due to AEC-Q200 reference standard compliance.
RM2012B103/603PBVW10
Thin Film Technology
RM2012B103/603PBVW10 by Thin Film Technology is a 0.1W resistor array with two functions, 10000 ohm and 60000 ohm resistances. It features 5 ppm/°C temperature coef tracking, 0.1% tolerance, and is ideal for surface mount applications in isolated networks.
EXB2HV560JV
Panasonic EXB2HV560JV is a 56 ohm resistor network with 8 functions, rated at 0.063 W power dissipation. Ideal for surface mount applications, it features a temperature coefficient of 200 ppm/°C and operates b/w -55 to 125 °C. AEC-Q200 compliant, this SMT package offers high precision in compact dimensions.
RM2012B103/103PBVW10
RM2012B103/103PBVW10 by Thin Film Technology is a 0.1W resistor array with two 10000 ohm elements, each having a tolerance of 0.1%. It features thin film technology and offers temperature coefficient tracking of 5 ppm/°C, making it ideal for surface mount applications requiring precise resistance values.
767161332GP
767161332GP by Cts is a Resistor Network with 15 elements, each rated at 3300 ohm. It has a power dissipation of 0.1W and operates b/w -55 to 125 °C. Ideal for applications requiring precise resistance values in compact SMT packages.
768163104GP
768163104GP by Cts is a Resistor Network with 0.2W power dissipation, 100000 ohm resistance, and 8 functions. It is used in applications requiring isolated network type, SMT package style, and GULL WING terminals for surface mounting.
MPMT20018001AT1
Vishay Intertechnology's MPMT20018001AT1 is a thin film resistor array with 2 elements, resistance of 2000 ohm and 8000 ohm. It has a power dissipation of 0.1 W, operating voltage of 100 V, and tolerance of 0.1%. Ideal for precision voltage divider applications due to its low temperature coefficient tracking at 2 ppm/°C.
MPMT10012002AT5
Vishay Intertechnology's MPMT10012002AT5 is a thin film resistor network with 2 elements, offering 0.1W power dissipation and 70°C rated temperature. Ideal for divider applications, it has a tracking coefficient of 2 ppm/°C and operates b/w -55°C to 150°C. Suitable for surface mounting, this SOT-23 package measures 3.05mm x 1.4mm x 1.02mm in dimensions.
4816P-T01-203
Bourns 4816P-T01-203 resistor network features 8 functions with 20000 ohm resistance, 1.28 W power dissipation, and -55 to 125 °C operating temperature range. Ideal for AEC-Q200 compliant applications requiring isolated networks in SMT mounting style.
CAT16-471J4LF
CAT16-471J4LF by Bourns is a resistor network with 470 ohm resistance, 5% tolerance, and 0.25 W power dissipation. Ideal for surface mount applications in electronics requiring isolated network type with 8 terminals and operating voltage of 50 V.
LT5400BCMS8E-6#PBF
Linear Technology
ARRAY/NETWORK RESISTOR; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 85 Cel; Tolerance: 7.5 %; Operating Voltage: 75 V; JESD-609 Code: e3;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
1+ parts
$106.00
100+ parts
$54.25
1k+ parts
$11.90
10k+ parts
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved