Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Rated Power Dissipation (P): .5 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %; Technology: CERMET;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
Variable Resistors 67WR2KTB attributes and parameters. Explore more Variable Resistors devices from Tt Electronics Plc
Orientation (Actuator):
Type (Actuator):
Construction:
Ganging Number:
JESD-609 Code:
Diameter (Lead):
Length (Lead):
Mounting Type:
No. of Terminals:
No. of Turns:
Maximum Operating Temperature:
Minimum Operating Temperature:
Height (Package):
Length (Package):
Package Style (Meter):
Width (Package):
Packing Method:
Rated Power Dissipation (P):
Rated Temperature:
Law Of Resistance:
Resistor Type:
Angle Of Rotation:
Sub-Category:
Technology:
Temperature Coef (ppm/Cel):
Terminal Finish:
Terminal Shape:
Tolerance:
Operating Voltage:
67WR2KTB Resistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8533.40.80.50
SB
8533.40.00.80
Our primary focus areas for growth and investment are in the end markets of healthcare, aerospace & defence, and automation & electrification which includes products that address resource scarcity, improve energy efficiency, support renewables and drive productivity, connectivity and health.
LM555CM
Fairchild Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
BAV99
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138LT3G
Onsemi
BSS138LT3G by Onsemi is a N-CHANNEL FET with a min DS breakdown voltage of 50V. It is used for switching applications and has a max drain current of 0.2A and max drain-source on resistance of 3.5 ohm.
2N7002
Formosa Microsemi
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Maximum Drain Current (Abs) (ID): .115 A;
BAV99LT1G
BAV99LT1G by Onsemi is a series connected diode with 2 elements in a small outline package. It has a max reverse recovery time of 0.006 us and can handle up to 100V repetitive peak reverse voltage. Ideal for rectification applications, this diode operates b/w -65°C to 150°C temperature range.
IRLML6402TRPBF
International Rectifier
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.3 W; Peak Reflow Temperature (C): 260; Package Style (Meter): SMALL OUTLINE;
DS18B20U
Dallas Semiconductor
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Minimum Operating Temperature: -55 Cel; Package Equivalence Code: TSSOP8,.19;
SMBJ18CA
Semtech
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358N
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
M39029/56351
Souriau
CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Gender: FEMALE; Insertion Tools: M81969/14-10; Tool Settings: M22520/2-10; DIN Conformity: NO;
1N4148
Vicor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
NE555D
NXP Semiconductors
SQUARE; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LM2931AZ-5.0RAG
LM2931AZ-5.0RAG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V nominal output voltage, 0.1A max output current, and 0.6V max dropout voltage. Ideal for applications requiring stable voltage regulation in temperature-sensitive environments up to 150°C.
2N2222A
Hi-tron Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM358AN
Samsung
M24308/2-1F
Positronic Industries
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Additional Features: STANDARD: MIL-DTL-24308, POLARIZED; Body or Shell Style: RECEPTACLE;
1552200253
Molex
WIRE AND CABLE;
Invensys Sensor Systems
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Repetitive Peak Reverse Voltage: 100 V;
Allegro MicroSystems
RECTIFIER DIODE; Terminal Position: END; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Sipex
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): 240; Terminal Finish: TIN LEAD;
3852A-282-101AL
Bourns
Bourns 3852A-282-101AL is a CERMET POTENTIOMETER with linear resistance law, 100 ohm resistance, and 10% tolerance. It has a rated power dissipation of 2W, operates b/w -1 to 125 °C, and offers a temperature coefficient of 150 ppm/°C. Ideal for panel mount applications requiring precise control in equipment such as audio mixers or industrial machinery.
PE30L0FL224KAB
Vishay Intertechnology
Vishay Intertechnology PE30L0FL224KAB is a CERMET POTENTIOMETER with 10% tolerance, 270° rotation angle, and 300V operating voltage. Ideal for panel mount applications in electronics requiring precise resistance adjustments within -55 to 125 °C temperature range.
PVG5A103C03R00
Murata Manufacturing
PVG5A103C03R00 by Murata is a 11-turn linear variable resistor with a resistance of 10000 ohm. It has a rated temperature of 70°C and can operate at voltages up to 300V. This trimmer resistor is commonly used in surface mount applications requiring precise resistance adjustments.
PDA241-HRT02-503B0
Bourns PDA241-HRT02-503B0 is a 50000 ohm POTENTIOMETER with 15% Tolerance, suitable for Panel Mount applications. With a rated power dissipation of 0.5 W and operating voltage of 500 V, it operates b/w -10 to 70 °C, featuring a cylindrical package shape measuring 24.2 mm in diameter and 12.8 mm in length.
3361S-1-502G
Bourns 3361S-1-502G is a CERMET variable resistor with 5000 ohm resistance, linear law, and 10% tolerance. It is a surface mount trimmer used in applications requiring precise resistance adjustments at temperatures ranging from -55 to 125 °C, with an operating voltage of 300 V.
252A103A60NB
Cts
The Cts 252A103A60NB is a linear potentiometer with 10000 ohm resistance, suitable for applications requiring precise voltage control. Featuring a vertical actuator and rectangular package, it has 6 wire terminals and operates b/w -10°C to 85°C. With a tolerance of 10%, this through-hole mount device has a rated power dissipation of 0.0125 W, making it ideal for joystick-type controls.
P0915N-FC15AR10K
Tt Electronics Plc
P0915N-FC15AR10K by Tt Electronics Plc is a 10000 ohm POTENTIOMETER with CONDUCTIVE PLASTIC tech, AUDIO law of resistance, and 20% tolerance. It has HORIZONTAL orientation, SHAFT actuator type, and PANEL mounting for applications in PCBs requiring precise resistance adjustments.
3314J-1-103G
Bourns 3314J-1-103G is a CERMET variable resistor with 10000 ohm resistance, linear law, and 20% tolerance. It operates b/w -55 to 125 °C and has a rated power dissipation of 0.25 W. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance.
RV4NAYSD102A
Ohmite Manufacturing
POTENTIOMETER; Mounting Type: PANEL MOUNT; Resistance: 1000 ohm; Rated Power Dissipation (P): 2 W; Maximum Operating Temperature: 120 Cel; No. of Turns: 1;
T93YA102KT20
Vishay Sfernice
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 1000 ohm; Rated Power Dissipation (P): .5 W; Maximum Operating Temperature: 155 Cel; Tolerance: 10 %;
6-1879321-8
TE Connectivity
POTENTIOMETER; Dimensions: 13.75mm x 11.7mm x 5.1mm; Orientation (Actuator): HORIZONTAL;
3214X-1-502E
Bourns 3214X-1-502E is a CERMET trimmer pot with 5000 ohm resistance, linear law, and 5 turns. Ideal for applications requiring precise resistance adjustments in compact SMT packages. Operating voltage of 300V, temperature range from -65 to 150 °C, and rated power dissipation of 0.25W make it versatile for various electronic circuits.
RRS250E
Ohmite Manufacturing's RRS250E is a 250 ohm wire wound potentiometer with linear resistance law. It features a 500W power dissipation, 10% tolerance, and 325° rotation angle. Ideal for panel mount applications requiring precise variable resistance control in a circular package.
RV4NAYSD252A
POTENTIOMETER; Mounting Type: PANEL MOUNT; Resistance: 2500 ohm; Rated Power Dissipation (P): 2 W; Maximum Operating Temperature: 120 Cel; Diameter (Package): 29.4 mm;
M63X201KB40
Vishay Intertechnology's M63X201KB40 is a CERMET TRIMMER resistor with 10% tolerance, rated at 0.5W power dissipation. It operates b/w -55°C to 125°C, offering linear resistance law and 270° rotation angle. Ideal for PCB mounting applications requiring precise resistance adjustments in a compact package.
3057Y-1-103
Bourns 3057Y-1-103 is a 10000 ohm linear potentiometer with 22 turns, rated for temperatures from -55 to 150 °C. Its wire wound technology and gold over nickel finish make it ideal for PCB mounting applications requiring precise resistance adjustments in a compact rectangular package.
3224W-1-253E
The Bourns 3224W-1-253E is a CERMET trimmer resistor with 12 turns and linear resistance law. It has a resistance of 25k ohm, tolerance of 10%, and rated power dissipation of 0.25W. Ideal for applications requiring precise resistance adjustments in compact SMT designs with operating temperatures ranging from -65 to 150°C.
M64Z202KB40
Vishay Intertechnology's M64Z202KB40 is a CERMET variable resistor with 21 turns, linear resistance law, and 10% tolerance. It operates b/w -55 to 155 °C and has a rated power dissipation of 0.5 W. Ideal for PCB mounting applications requiring precise voltage adjustments in electronic circuits.
3362U-1-253LF
Bourns 3362U-1-253LF is a CERMET trimmer resistor with 25000 ohm resistance, linear law, and 10% tolerance. It has a rated power dissipation of 0.5 W and operates b/w -55 to 125 °C. Ideal for PCB mounting applications requiring precise resistance adjustments in a compact rectangular package.
3266X-1-503LF
The Bourns 3266X-1-503LF is a CERMET multi-turn trimmer resistor with 12 turns and linear resistance law. It has a resistance of 50k ohm, tolerance of 10%, and operates at temperatures ranging from -55 to 150 °C. Ideal for applications requiring precise voltage adjustments in through-hole mounting setups.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
1+ parts
$106.00
100+ parts
$54.25
1k+ parts
$11.90
10k+ parts
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved