Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 2000000 ohm; Rated Power Dissipation (P): .5 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
Variable Resistors 25XR2MEG attributes and parameters. Explore more Variable Resistors devices from Tt Electronics Plc
Orientation (Actuator):
Type (Actuator):
Additional Features:
Construction:
Ganging Number:
Length (Lead):
Mounting Type:
No. of Terminals:
No. of Turns:
Maximum Operating Temperature:
Minimum Operating Temperature:
Height (Package):
Length (Package):
Shape (Package):
Package Style (Meter):
Width (Package):
Packing Method:
Rated Power Dissipation (P):
Rated Temperature:
Resistance:
Law Of Resistance:
Resistor Type:
Angle Of Rotation:
Sub-Category:
Technology:
Temperature Coef (ppm/Cel):
Terminal Shape:
Tolerance:
Operating Voltage:
25XR2MEG Resistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8533.40.80.50
SB
8533.40.00.80
Our primary focus areas for growth and investment are in the end markets of healthcare, aerospace & defence, and automation & electrification which includes products that address resource scarcity, improve energy efficiency, support renewables and drive productivity, connectivity and health.
BSS138LT1G
Onsemi
BSS138LT1G by Onsemi is a N-CHANNEL FET with 50V DS Breakdown Voltage, 0.2A Drain Current, and 3.5 ohm On Resistance. Ideal for SWITCHING applications due to its ENHANCEMENT MODE operation and built-in DIODE. Operates b/w -55 to 150 °C with small outline package style for surface mount assembly.
SS14
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Surface Mount: YES; Technology: SCHOTTKY; No. of Phases: 1; Config: SINGLE; Maximum Operating Temperature: 125 Cel;
DS18B20+
Analog Devices
DS18B20+ by Analog Devices is a 12-bit temperature sensor with 3.3/5V supply, -55 to 125°C range, and ±0.50°C accuracy. It features a 1-Wire interface for digital output and is commonly used in applications requiring precise temperature monitoring in various industries.
2N7002
Teledyne Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JESD-30 Code: R-PDSO-G3; Maximum Operating Temperature: 150 Cel; No. of Terminals: 3;
NE555DR
Texas Instruments
NE555DR by Texas Instruments is an Analog Waveform Generation IC with 8 terminals, operating voltage of 5V, and power supplies ranging from 5-15V. It is a versatile component for pulse generation applications due to its small outline package and commercial temperature grade suitability.
LM2931Z-5.0RPG
LM2931Z-5.0RPG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V Nominal Output Voltage, 0.1A Max Output Current, and 6V Min Input Voltage. It operates in temperatures ranging from -40 to 125 °C and is ideal for applications requiring stable voltage regulation in electronic circuits.
FDD5614P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 42 W; Terminal Position: SINGLE; Terminal Form: GULL WING;
LM555CN
Harris Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
MBRS130LT3G
Rochester Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Shenzhen Yixinsemi Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM317T
STMicroelectronics
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; JESD-30 Code: R-XSFM-T3; Minimum Input-Output Voltage Differential: 3 V;
USB3320C-EZK-TR
Microchip Technology
Microchip Technology's USB3320C-EZK-TR is a Bus Controller IC with 32 terminals, operating at 1.6-2V. It supports USB bus compatibility, clock frequency up to 60MHz, and CMOS technology. Ideal for applications requiring Universal Serial Bus peripherals in compact designs with low power consumption.
AH180-WG-7
Diodes Incorporated
AH180-WG-7 by Diodes Inc. is a magnetic field sensor with 1.5mT hysteresis, 0.30V output range, and 9mA max operating current. Ideal for applications requiring non-inverting analog voltage output in a compact rectangular package suitable for surface mount installations.
Digitron Semiconductors
2N2222A
Crystalonics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Intersil
Bytesonic Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Terminal Position: DUAL; Minimum Operating Temperature: -55 Cel;
M39029/58-360
Amphenol
CONNECTOR ACCESSORY; MIL Conformity: YES; Associated Military - Specifications: MIL-DTL-38999; Contact Gender: MALE; Terminal Type: CRIMP; IEC Conformity: NO;
RK73H2ATTD10R0F
Koa Speer Electronics
RK73H2ATTD10R0F by Koa Speer Electronics is a 0805 SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.25 W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard and operating voltage of 150 V.
T93YB104KT20
Vishay Intertechnology
Vishay Intertechnology's T93YB104KT20 is a 100k ohm linear trimmer resistor with 21 turns and 10% tolerance. It operates b/w -55 to 125 °C, suitable for PCB mounting applications requiring precise resistance adjustments in a compact rectangular package. The resistor features a screw actuator, matte tin terminals, and can handle up to 0.5 W power dissipation.
3005P-1-502
Bourns
The Bourns 3005P-1-502 is a linear wire wound variable resistor with 20 turns and a resistance of 5000 ohm. It has a rated power dissipation of 1W and can operate in temperatures ranging from -65 to 125 °C. This trimmer resistor is commonly used in PCB mount applications requiring precise resistance adjustments.
14910F0GJSX10501KA
Vishay Intertechnology's 14910F0GJSX10501KA is a CERMET variable resistor with a resistance of 500 ohm and a tolerance of 10%. It is commonly used in PCB mount applications, with a max operating temperature of 125 °C and an angle of rotation of 270°.
P272-DS32R5K
Tt Electronics Plc
P272-DS32R5K by Tt Electronics Plc is a 5000 ohm linear potentiometer with 6 terminals and 10% tolerance. It operates b/w -55°C to 120°C, suitable for panel mount applications. Featuring conductive plastic technology, it has a rated power dissipation of 2W and ganging number of 2, making it ideal for precise resistance control in various electronic devices.
3362P-1-101LF
Bourns 3362P-1-101LF is a linear trimmer resistor with 100 ohm resistance, 10% tolerance, and 0.5 W power dissipation. It has a CERMET technology, operates b/w -55 to 125 °C, and features a screw actuator for adjusting resistance. Ideal for PCB mounting applications requiring precise resistance adjustments in electronic circuits.
3386H-1-102LF
Bourns 3386H-1-102LF is a linear trimmer resistor with 1000 ohm resistance, 10% tolerance, and 0.5 W power dissipation. It has a temperature coefficient of 100 ppm/°C and operates b/w -55 to 125 °C. Ideal for PCB mounting applications requiring precise resistance adjustments.
3329H-1-502LF
Bourns 3329H-1-502LF is a CERMET trimmer resistor with 5000 ohm resistance, linear law, and 10% tolerance. It operates b/w -55 to 150 °C and has a rated power dissipation of 0.5 W. Ideal for PCB mounting applications requiring precise resistance adjustments in electronic circuits.
M64Z202KB40
Vishay Intertechnology's M64Z202KB40 is a CERMET variable resistor with 21 turns, linear resistance law, and 10% tolerance. It operates b/w -55 to 155 °C and has a rated power dissipation of 0.5 W. Ideal for PCB mounting applications requiring precise voltage adjustments in electronic circuits.
SM-42TW103
Nidec Copal Electronics
The Nidec Copal Electronics SM-42TW103 is a 10000 ohm linear trimmer resistor with 11 turns and CERMET technology. It operates b/w -65 to 150 °C, suitable for applications requiring precise resistance adjustments in compact SMT packages. With a tolerance of 10%, it offers a rated power dissipation of 0.25 W at an operating voltage of 50 V.
3306F-1-102
Bourns 3306F-1-102 is a linear trimmer resistor with 1000 ohm resistance, 25% tolerance, and 0.2 W power dissipation. It operates b/w -25 to 100 °C and has a temperature coefficient of 250 ppm/°C. Ideal for PCB mounting applications requiring precise resistance adjustments in electronic circuits.
73JB50K
Honeywell Sensing And Control
73JB50K by Honeywell Sensing And Control is a linear wire wound potentiometer with 50000 ohm resistance, 3 terminals, and 5% tolerance. It has a circular package shape and vertical actuator orientation for chassis mount applications. Operating temperature ranges from -40 to 120 °C with a rated power dissipation of 2W.
3314J-1-203E
The Bourns 3314J-1-203E is a CERMET variable resistor with 20000 ohm resistance, 20% tolerance, and 210° rotation angle. It is used in surface mount applications for trimming circuits due to its linear law of resistance and screw actuator type. Operating voltage up to 300V makes it suitable for various electronic devices.
P231-QC20BR100K
P231-QC20BR100K by Tt Electronics Plc is a 100000 ohm linear conductive plastic rotary potentiometer with 3 terminals. It has a tolerance of 20% and operates b/w -20 to 70 °C, making it suitable for panel mount applications requiring precise resistance adjustments in a compact package. With a rated power dissipation of 0.5 W and an angle of rotation of 260°, this potentiometer is ideal for various electronic devices.
3299X-1-204LF
Bourns 3299X-1-204LF is a CERMET trimmer pot with 200k ohm resistance, 25 turns, and linear resistance law. It operates b/w -55 to 125 °C and has a tolerance of 10%. Ideal for PCB mounting applications requiring precise resistance adjustments.
D50K5K0E
Ohmite Manufacturing
The Ohmite Manufacturing D50K5K0E is a 5000 ohm wire wound potentiometer with linear resistance law. It has a rated power dissipation of 50W, operating voltage of 1625V, and temperature coefficient of 260 ppm/°C. Ideal for chassis mount applications requiring precise resistance adjustments in high-temperature environments up to 350 °C.
3296W-1-100LF
Bourns 3296W-1-100LF is a 10 ohm, 25-turn linear cermet trimmer resistor with a tolerance of 10%. It operates at temperatures ranging from -55 to 125 °C and has a max voltage of 300 V. Ideal for applications requiring precise resistance adjustments in through-hole mounting configurations.
RJS6R0
The Ohmite Manufacturing RJS6R0 is a 50W wire wound potentiometer with linear resistance law. Featuring a 300° shaft actuator, it has a panel mount package style and chassis mounting type. Ideal for applications requiring precise resistance control in compact spaces.
67WR500LF
67WR500LF by Tt Electronics Plc is a CERMET variable resistor with 20 turns, linear resistance law, and 10% tolerance. It has a rated power dissipation of 0.5W and operates b/w -55 to 125 °C. Ideal for PCB mounting applications requiring precise resistance adjustments in electronic circuits.
23ESB473MMF50NF
TE Connectivity
TE Connectivity's 23ESB473MMF50NF is a 47000 ohm logarithmic potentiometer with a circular package. Featuring carbon film technology, it has a tolerance of 20% and rated power dissipation of 0.4 W. Ideal for applications requiring precise resistance adjustments in horizontal orientation.
25PR10KLF
25PR10KLF by Tt Electronics Plc is a CERMET variable resistor with a resistance of 10000 ohm and rated power dissipation of 0.5 W. It has an operating voltage of 300 V, linear law of resistance, and temperature coefficient of 100 ppm/°C. Ideal for PCB mount applications, this trimmer resistor features a screw actuator and operates b/w -55 to 125 °C temperatures.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
1+ parts
$106.00
100+ parts
$54.25
1k+ parts
$11.90
10k+ parts
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved