Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Traco Electronic Ag's TMR3-2423 is a DC-DC regulated power supply module with 85% efficiency. It offers dual outputs at 15V, 0.1A each, ideal for applications requiring compact power solutions. With a wide operating temperature range (-40 to 70°C) and small form factor (21.8 x 9.2 x 11.1 mm), it suits various electronic devices.
Median Price
$23.200
Lifecycle Status
Suppliers In-Stock
20
In-Stock Inventory
1k+
Bürklin Elektronik
1+ parts
$19.000
100+ parts
-
1k+ parts
10k+ parts
Sager Power Systems
$21.200
$18.240
DigiKey
$22.810
$20.466
$19.699
Arrow
$16.700
Mouser Electronics
$18.420
$18.090
Sager
$18.330
Newark
$27.100
$22.220
Element14
$33.330
Verical
$35.692
Distrelec
Nova Conductors
$18.409
TME
$21.480
$17.770
Chip Stock
Vyrian
ComSIT Distribution GmbH
ComSIT USA
EMSNET
Martec Srl
Semtec, LLC
ACDS - Activité Composants Distribution Service
Semicontronic
$16.150
$15.746
$15.666
Continental Prestige Electronics
$17.941
$17.583
Bastille Electronics
$18.410
$17.490
$16.385
Aztec Data Supply Inc.
$20.007
Argo Parts USA
The use of plastic/epoxy for the package body material makes the power supply module lightweight and durable.
With a high efficiency of 85%, this power supply module helps in saving energy and reducing heat generation.
Having 7 terminals allows for flexible connection options and compatibility with various systems.
The high maximum operating temperature of 70°C ensures reliable performance even in harsh environments.
The minimum output voltage of 14.85 V meets the required power specifications for many electronic devices.
The low minimum operating temperature of -40°C enables the power supply module to function in cold conditions.
The matte tin finish provides good contact conductivity and corrosion resistance for the terminals.
The maximum output voltage of 15.15 V meets the power requirements of various applications.
The single terminal position simplifies installation and connection of the power supply module.
The low maximum seated height of 11.1 mm makes this power supply module suitable for space-constrained designs.
The compact width of 9.2 mm allows for easy integration of the power supply module into different systems.
The low maximum load regulation of 1% ensures stable and accurate output voltage under varying load conditions.
Being a DC-DC regulated power supply module, it provides precise and consistent output voltages for sensitive electronic components.
The nominal input voltage of 24 V is a common standard in many electronic systems, making this power supply module compatible with various devices.
The short length of 21.8 mm allows for easy installation in tight spaces or compact electronic devices.
With a maximum output current of 0.1 A, this power supply module is suitable for low-power applications.
The hybrid technology combines the advantages of different power supply technologies, offering improved performance and efficiency.
The standard terminal pitch of 2.54 mm allows for easy connection and compatibility with standard connectors.
The maximum total power output of 3 W meets the power requirements of low-power electronic devices.
The minimum input voltage of 18 V ensures that the power supply module can operate within a wide range of input voltages.
Having 2 outputs allows for powering multiple components or circuits with a single power supply module.
The nominal output voltage of 15 V is a common standard in many electronic systems, making this power supply module widely compatible.
The high maximum input voltage of 36 V provides flexibility in power supply options and compatibility with different systems.
Power Supply Modules TMR3-2423 attributes and parameters. Explore more Power Supply Modules devices from Traco Electronic Ag
Additional Features:
Other IC type:
Main Output Efficiency:
Maximum Input Voltage:
Minimum Input Voltage:
Nominal Input Voltage:
JESD-609 Code:
Length:
Maximum Load Regulation:
No. of Functions:
No. of Outputs:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Maximum Output Current:
Maximum Output Voltage:
Minimum Output Voltage:
Nominal Output Voltage:
Package Body Material:
Package Equivalence Code:
Peak Reflow Temperature (C):
Qualification:
Maximum Seated Height:
Sub-Category:
Surface Mount:
Technology:
Temperature Grade:
Terminal Finish:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Maximum Total Power Output:
Trim or Adjustable Output (V):
Width (mm):
TMR3-2423 Other Function Semiconductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Since its founding in 1944 Traco Power has been the leading manufacturer of DC/DC converters, AC/DC switching power supplies and customer-specific power supply solutions. Our claim is more than a promise. Reliability, availability and solution-oriented flexibility are firmly embedded in our DNA. This not only applies to our products but to the partnership with our customers as well.
2N7002
Transys Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Minimum DS Breakdown Voltage: 60 V; Maximum Operating Temperature: 150 Cel;
LM2675M-ADJ/NOPB
Texas Instruments
LM2675M-ADJ/NOPB by Texas Instruments is a voltage-mode switching regulator with 1A output current, 37V max output voltage, and 260kHz max switching frequency. Ideal for automotive applications due to its -40°C to 125°C operating temperature range and compact small outline package design.
E8WSDC12-32.768KTR
Abracon
Abracon's E8WSDC12-32.768KTR crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and communication systems.
BSS138
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3 ohm; Minimum DS Breakdown Voltage: 50 V; Terminal Form: GULL WING;
INA826AIDGKR
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
CRCW04020000Z0ED
Vishay Intertechnology
Vishay Intertechnology's CRCW04020000Z0ED is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating b/w -55 to 155 °C, it suits SMT applications in automotive electronics due to AEC-Q200 compliance and 0.063 W power dissipation.
B340A-13-F
Diodes Incorporated
B340A-13-F by Diodes Inc. is a Schottky rectifier diode with 40V reverse test voltage, 3A max output current, and 0.5V max forward voltage. It is used for efficiency applications in electronics due to its small outline package and high operating temperature range of -55°C to 150°C.
LL4148
Kec
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM358N
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
AH180-WG-7
AH180-WG-7 by Diodes Inc. is a magnetic field sensor with 1.5mT hysteresis, 0.30V output range, and 9mA max operating current. Ideal for applications requiring non-inverting analog voltage output in a compact rectangular package suitable for surface mount installations.
M39029/58-360
Molex
CONNECTOR ACCESSORY; Alternate Contact Sources: MILITARY; Removal Tool Sources: MILITARY; Material: COPPER ALLOY; National Stock Number (NSN): 5999004733551; Mating Contacts: M39029/56-348, M39029/57-354;
1N4148WS
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Changzhou Galaxy Century Microelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Minimum DS Breakdown Voltage: 50 V; Maximum Operating Temperature: 150 Cel;
1N4148
Tak Cheong Electronics Holdings
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
AMS1117-3.3
Advanced Monolithic Systems
AMS1117-3.3 by Advanced Monolithic Systems is a fixed positive single output LDO regulator with 1A max output current, 3% voltage tolerance, and 1.3V dropout voltage. Ideal for applications requiring stable 3.3V supply in compact designs due to its small outline package and excellent load regulation of 0.025%.
BAT54C-7-F
BAT54C-7-F by Diodes Inc. is a Schottky rectifier diode with common cathode, 2 elements, and max forward voltage of 0.24V. Ideal for applications requiring fast reverse recovery time of 0.005 us, such as in small outline packages for surface mount technology at temperatures ranging from -65 to 150°C.
2N2222A
Vishay Sprague
NPN; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JEDEC-95 Code: TO-18; Maximum Collector-Emitter Voltage: 40 V;
2N7002 by Vishay Intertechnology is a N-CHANNEL FET with 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. Ideal for SWITCHING applications due to its SINGLE configuration with BUILT-IN DIODE. Operates in ENHANCEMENT MODE, suitable for surface mount with GULL WING terminals.
Taitron Components
SMBJ18CA
Vishay Intertechnology's SMBJ18CA is a bidirectional TRANS VOLTAGE SUPPRESSOR DIODE with a max clamping voltage of 29.2 V and a breakdown voltage of 21.05 V. It is surface mountable and commonly used in transient suppression applications.
NME0505SC
Murata Manufacturing
Murata Manufacturing's NME0505SC is a DC-DC regulated power supply module with 4 terminals, operating b/w -40 to 85°C. It offers a max output current of 0.2A and load regulation of 15%, suitable for industrial applications requiring a nominal input voltage of 5V and total power output of 1W.
MEJ1S0305SC
Murata Power Solutions
DC-DC UNREGULATED POWER SUPPLY MODULE; Temperature Grade: INDUSTRIAL; No. of Terminals: 4; Package Code: SMA; Package Shape: RECTANGULAR; Surface Mount: NO;
GST280A48-C6P
Mean Well Enterprises
AC-DC POWER FACTOR CORRECTION MODULE;
TME0509S
Powersolve Electronics
DC-DC REGULATED POWER SUPPLY MODULE; No. of Terminals: 4; Package Code: SIP; Package Shape: RECTANGULAR; Surface Mount: NO; Package Body Material: PLASTIC/EPOXY;
PDS1-S5-S5-M-TR
Cui
The Cui PDS1-S5-S5-M-TR is a 1W DC-DC unregulated power supply module with 5V nominal input/output voltage. It features a max output current of 0.2A and operates in industrial temperature grade (-40 to 100°C). With a compact rectangular package style, it's ideal for surface mount applications requiring reliable power delivery in tight spaces.
RAC05-05SK
Recom Power
RAC05-05SK by Recom Power is a 5W AC-DC regulated power supply module with output voltage range of 4.95V to 5.05V. It operates b/w -25°C to 50°C, suitable for various microelectronic applications due to its compact square package style and dual terminal position. With input voltage range of 85V to 264V, it's ideal for powering electronic devices in different environments.
ADUM6000ARWZ-RL
Analog Devices
ADUM6000ARWZ-RL by Analog Devices is a DC-DC regulated power supply module with 16 terminals. It operates b/w -40 to 105°C, providing output voltage of 4.7-5.4V at 0.09A max current. Ideal for industrial applications requiring small outline, surface mount power solutions with dual terminal position.
I6A24014A033V-001-R
TDK
The TDK I6A24014A033V-001-R is a DC-DC regulated power supply module with trimmable output voltage from 3.3V to 24V, offering up to 250W total power output. It features a hybrid technology design in a rectangular package with 11 pin/peg terminals, suitable for various power supply applications requiring input voltages b/w 9V and 40V.
NKA0512SC
Murata Manufacturing's NKA0512SC is a 1W DC-DC unregulated power supply module with 78% efficiency. It has 5 terminals, operates b/w -40 to 85°C, and offers dual outputs at 12V. Ideal for industrial applications requiring reliable power conversion in compact MICROELECTRONIC ASSEMBLY package style.
TSRN1-2433
Traco Electronic Ag
TSRN1-2433 by Traco Electronic Ag is a DC-DC regulated power supply module with a max output current of 1A and a nominal output voltage of 3.3V. It is commonly used in applications requiring a compact and efficient power supply solution, such as microelectronic assemblies.
EHHD015A0A41-HZ
Ge Power Electronics
DC-DC REGULATED POWER SUPPLY MODULE; No. of Terminals: 8; Package Shape: RECTANGULAR; Surface Mount: NO; Nominal Output Voltage: 5 V; Maximum Output Voltage: 5.5 V;
MAP110-4004L
Power-one
AC-DC REGULATED POWER SUPPLY MODULE; Temperature Grade: COMMERCIAL; Package Shape: RECTANGULAR; Surface Mount: NO; Nominal Input Voltage: 230 V; Minimum Operating Temperature: 0 Cel;
HWS150A-24/HD
Tdk-lambda
AC-DC REGULATED POWER SUPPLY MODULE; Temperature Grade: COMMERCIAL EXTENDED; No. of Terminals: 8; Package Code: XMA; Package Shape: RECTANGULAR; Surface Mount: YES;
R-78E5.0-1.0
R-78E5.0-1.0 by Recom Power is a DC-DC regulated power supply module with a nominal output voltage of 5V and max total power output of 5W. It operates in temperatures ranging from -40°C to 60°C, making it suitable for various applications requiring stable power supply in compact spaces. With a package style of microelectronic assembly and through-hole terminal form, this module is ideal for projects where space efficiency and reliable performance are crucial.
TMR1-2411SM
TMR1-2411SM by Traco Electronic Ag is a DC-DC regulated power supply module with 79% efficiency, 5V output voltage, and 0.2A max current. It is a surface-mount microelectronic assembly ideal for applications requiring compact power solutions in industrial environments.
IRM-60-24ST
IRM-60-24ST by Mean Well Enterprises is a 60W AC-DC regulated power supply module. It has a min input voltage of 85V and a max input voltage of 264V. With a nominal output voltage of 24V, it is commonly used in applications requiring reliable power supply.
KHHD004A2B41-SRZ
Abb
The ABB KHHD004A2B41-SRZ is a DC-DC regulated power supply module with adjustable output voltage from 9.6V to 13.2V, ideal for applications requiring precise power regulation. With a max total power output of 50W and compact dimensions of 33mm x 22.9mm x 9.3mm, it offers efficient power delivery in a microelectronic assembly package style.
HWS600-24
AC-DC REGULATED POWER SUPPLY MODULE; Temperature Grade: COMMERCIAL; No. of Terminals: 4; Package Shape: RECTANGULAR; Surface Mount: NO; Peak Reflow Temperature (C): NOT SPECIFIED;
VXO7805-500-M-TR
Cui's VXO7805-500-M-TR is a DC-DC regulated power supply module with 90% efficiency, 0.017675 Vrms ripple voltage, and 0.3% load regulation. It operates b/w -40 to 85 °C and has a max output current of 0.5 A at 5 V, making it ideal for compact electronic devices requiring stable power supply in various applications.
MDR20-12
Astrodyne Tdi
Astrodyne Tdi's MDR20-12 is a 20W AC-DC regulated power supply module with trimmable output voltage from 10.8V to 13.2V, ideal for microelectronic assemblies. Operating temperature range of -20°C to 50°C, it accepts input voltages from 85V to 264V making it versatile for various applications requiring a nominal output of 12V.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
TMR3-2411WI
TMR3-2411WI by Traco Electronic Ag is a DC-DC regulated power supply module with 80% efficiency. It has a max output current of 0.6 A and nominal input voltage of 24 V, making it ideal for industrial applications requiring stable power delivery in compact spaces. With dimensions of 21.8mm x 9.2mm x 11.2mm, this module offers precise load regulation and operates within a wide temperature range from -40°C to 85°C.
TMR3-2411WIE
Traco Electronic Ag's TMR3-2411WIE is a 3W DC-DC regulated power supply module with 80% efficiency. It operates b/w -40 to 85°C, suitable for applications requiring a stable output voltage of 5V from an input range of 9-36V. With compact dimensions (21.8mm x 9.3mm x 11.7mm), it features through-hole terminals and is ideal for microelectronic assemblies.
TMR3-2411WIR
TMR3-2411WIR by Traco Electronic Ag is a 3W DC-DC regulated power supply module with 81% efficiency. It operates in industrial temperatures (-40 to 90°C) and accepts input voltages from 9V to 36V, providing a stable output of 5V at 0.6A. Ideal for microelectronic assemblies requiring compact power solutions.
TMR3-2411
TMR3-2411 by Traco Electronic Ag is a DC-DC regulated power supply module with 82% efficiency. It operates b/w -40 to 70°C, providing a 5V output at 0.6A. With a compact size of 21.8mm x 9.2mm x 11.1mm, it's ideal for various electronic applications requiring reliable power conversion.
TMR3-2411WISM
Traco Electronic Ag's TMR3-2411WISM is a DC-DC regulated power supply module with 80% efficiency, 5V output voltage, and 0.6A max current. Ideal for applications requiring a compact microelectronic assembly with high load regulation and wide input voltage range of 9-36V.
TMR3-2423WI
TMR3-2423WI by Traco Electronic Ag is a DC-DC regulated power supply module with 81% efficiency. It has 2 outputs, with a nominal output voltage of 15V and max total power output of 3W. Ideal for industrial applications requiring reliable power conversion in compact spaces.
TMR3-2422WI
Traco Electronic Ag's TMR3-2422WI power supply module offers 81% efficiency, 12V output voltage, and 3W total power output. Ideal for industrial applications with a nominal input voltage of 24V and operating temperature range from -40 to 85°C.
TMR3-2410WIE
TMR3-2410WIE by Traco Electronic Ag is a DC-DC regulated power supply module with 75% efficiency. It operates b/w -40 to 85°C, providing a max output current of 0.7A at 3.333V for applications requiring reliable power in compact spaces.
TMR3-2423WIE
TMR3-2423WIE by Traco Electronic Ag is a DC-DC regulated power supply module with 81% efficiency. It has 2 outputs, with a max output current of 0.1A and total power output of 3W. Ideal for applications requiring a compact power solution in industrial settings.
TMR3-2422WIE
Traco Electronic Ag's TMR3-2422WIE is a DC-DC regulated power supply module with 80% efficiency, 12.24V max output voltage, and 3W total power output. Ideal for applications requiring reliable power conversion in compact spaces with a wide operating temperature range from -40 to 85°C.
TMR3-2411HI
Traco Electronic Ag's TMR3-2411HI is a 3W DC-DC regulated power supply module with 82% efficiency. Operating b/w -40 to 70°C, it offers a single output at 5V and can handle up to 0.6A current. Ideal for applications requiring compact power solutions in industrial settings.
TMR3-2422WIR
DC-DC REGULATED POWER SUPPLY MODULE; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Shape: RECTANGULAR; Surface Mount: NO; Nominal Input Voltage: 24 V;
TMR3-2423WIR
Traco Electronic Ag's TMR3-2423WIR power supply module offers 82% efficiency, 15.15V max output voltage, and 3W total power output. Ideal for industrial applications with a temp range of -40 to +90 °C, it features a compact MICROELECTRONIC ASSEMBLY package style.
TMR3-2410WI
Traco Electronic Ag's TMR3-2410WI is a DC-DC regulated power supply module with 75% efficiency, 3.267V min output voltage, and 2.3W max total power output. Ideal for industrial applications requiring a compact MICROELECTRONIC ASSEMBLY package with 24V nominal input voltage and -40 to 85°C operating temperature range.
TMR3-2410WIR
DC-DC REGULATED POWER SUPPLY MODULE; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Shape: RECTANGULAR; Surface Mount: NO; JESD-609 Code: e3;
TMR3-2422
DC-DC REGULATED POWER SUPPLY MODULE; Temperature Grade: OTHER; No. of Terminals: 7; Surface Mount: NO; Technology: HYBRID; Maximum Output Current: .125 A;
TMR3-2422WISM
DC-DC REGULATED POWER SUPPLY MODULE; Temperature Grade: OTHER; No. of Terminals: 7; Package Shape: RECTANGULAR; Surface Mount: YES; Maximum Output Current: .125 A;
TMR3-2412HI
DC-DC REGULATED POWER SUPPLY MODULE; Temperature Grade: OTHER; No. of Terminals: 7; Package Shape: RECTANGULAR; Surface Mount: NO; Main Output Efficiency: 83 %;
TMR3-2412WI
DC-DC REGULATED POWER SUPPLY MODULE; Temperature Grade: INDUSTRIAL; No. of Terminals: 7; Package Shape: RECTANGULAR; Surface Mount: NO; Width (mm): 9.2 mm;
TMR3-2413E
TMR3-2413E by Traco Electronic Ag is a DC-DC regulated power supply module with 83% efficiency. It operates b/w -40 to 85°C, providing an output voltage range of 14.85V to 15.15V at a max current of 0.2A. Ideal for applications requiring compact power solutions in various electronic devices.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved