Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Parallel IO Ports; Temperature Grade: INDUSTRIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 24; Package Code: DIP; Package Shape: RECTANGULAR;
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
< 1k
Fibra_Brandt Electronic GMBH
1+ parts
100+ parts
1k+ parts
10k+ parts
Digital Electronic Gebert Verwaltungs UG
Corohmni
$28.138
Authorized Procurement Solutions
Kepictronics
Assy Fe
Parallel I/O Ports TMP8243PI attributes and parameters. Explore more Parallel I/O Ports devices from Toshiba
JESD-30 Code:
JESD-609 Code:
No. of Bits:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Power Supplies (V):
Qualification:
Sub-Category:
Nominal Supply Voltage:
Surface Mount:
Technology:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
TMP8243PI Peripheral ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
TOSHIBA, is a Japanese multinational conglomerate corporation headquartered in Minato, Tokyo, Japan. Its diversified products and services include power, industrial and social infrastructure systems, elevators and escalators, electronic components, semiconductors, hard disk drives (HDD), printers, batteries, lighting, as well as IT solutions such as quantum cryptography which has been in development at Cambridge Research Laboratory, Toshiba Europe, located in the United Kingdom, now being commercialised.It was one of the biggest manufacturers of personal computers, consumer electronics, home appliances, and medical equipment. As a semiconductor company and the inventor of flash memory, Toshiba had been one of the top 10 in the chip industry until its flash memory unit was spun off as Toshiba Memory, later Kioxia, in the late 2010s.
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
INA826AIDGKR
Texas Instruments
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
LL4148
Weitron Technology
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
DS18B20U+
Analog Devices
DS18B20U+ by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
1N4148
Diotec Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
ABS10-32.768KHZ-T
Abracon
Abracon's ABS10-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and wearables due to its compact size and low power consumption.
STM32H753IIK6
STMicroelectronics
STM32H753IIK6 by STMicroelectronics is a 32-bit microcontroller with 176 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs, 2-Ch 12-Bit DACs, and peripherals like CAN, ETHERNET, and USB. Ideal for industrial applications requiring high-speed processing and extensive connectivity options.
1N4148WT
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
Jiangsu Changjiang Electronics Technology
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Style (Meter): SMALL OUTLINE; Maximum Drain Current (ID): .22 A; Package Shape: RECTANGULAR;
FDLL4148
Fairchild Semiconductor
National Semiconductor
Taiwan Semiconductor
RECTIFIER DIODE; Surface Mount: NO; Peak Reflow Temperature (C): 260; Maximum Operating Temperature: 175 Cel; JESD-609 Code: e3; No. of Elements: 1;
LD1117S33TR
LD1117S33TR by STMicroelectronics is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1.3A. It has a small outline package style, operates at an adjustable temperature range from 0 to 125°C, and is ideal for applications requiring stable voltage regulation in compact electronic devices.
M24308/2-1F
Air Electro
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; MIL Conformity: YES; Additional Features: STANDARD: MIL-DTL-24308;
AMS1117-3.3
Advanced Monolithic Systems
AMS1117-3.3 by Advanced Monolithic Systems is a fixed positive single output LDO regulator with 1A max output current, 3% voltage tolerance, and 1.3V dropout voltage. Ideal for applications requiring stable 3.3V supply in compact designs due to its small outline package and excellent load regulation of 0.025%.
NUP2105LT1G
Onsemi
NUP2105LT1G by Onsemi is a Transient Suppression Device with 350W power dissipation, 29.1V breakdown voltage, and 44V clamping voltage. Commonly used in electronic circuits for surge protection due to its bidirectional polarity and silicon diode element material.
Changzhou Galaxy Century Microelectronics
1N4148WS
Laube Technology
BAV99
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
PCF8575DBQRE4
PCF8575DBQRE4 by Texas Instruments is a 16-bit parallel I/O port with 3/5V power supplies. It features a small outline package, dual terminal position, and CMOS technology. Ideal for industrial applications requiring general-purpose parallel I/O ports in compact designs.
PCA9555DB/G,118
NXP Semiconductors
PCA9555DB/G,118 by NXP Semiconductors is a Parallel I/O Port with 16 bits, operating at 2.3-5.5V. It comes in a small outline package and is ideal for industrial applications requiring general-purpose parallel I/O functionality.
PCA9554PW
PARALLEL IO PORT, GENERAL PURPOSE; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: TSSOP; Package Shape: RECTANGULAR;
PCA9554ARGTR
PCA9554ARGTR by Texas Instruments is an 8-bit parallel I/O port with a supply voltage range of 2.3V to 5.5V, suitable for industrial applications. It features a clock frequency of 0.4 MHz and operates in temperatures ranging from -40°C to 85°C. The chip carrier package has a very thin profile and nickel/palladium/gold terminal finish, making it ideal for space-constrained designs.
DS4520E+TRL
DS4520E+TRL by Analog Devices is a 9-bit parallel I/O port with supply voltage range of 2.7V to 5.5V, suitable for industrial applications. It features small outline package style, CMOS technology, and matte tin terminal finish for robust performance in temperature range from -40°C to 85°C.
IP82C55AZ
Renesas Electronics
IP82C55AZ by Renesas Electronics is a CMOS technology Parallel I/O Port with 24 I/O lines. It operates b/w -40 to 85 °C and supports 5V nominal voltage. Widely used in industrial applications for general purpose parallel I/O interfacing due to its 3 ports and dual terminal position.
PCA9555DBG4
PCA9555DBG4 by Texas Instruments is a parallel I/O port with 16 bits. It operates at a supply voltage range of 2.3V to 5.5V and has an industrial temperature grade. This IC is commonly used for general-purpose parallel I/O applications.
TCA9534ADWT
TCA9534ADWT by Texas Instruments is a parallel I/O port with 8 bits and 1 port. It operates at a max supply voltage of 5.5V and has a max clock frequency of 0.4MHz. It is commonly used in industrial applications for general-purpose parallel I/O operations.
PCA9673PW,118
PCA9673PW,118 by NXP Semiconductors is a Parallel I/O Ports IC with 18 I/O lines. It operates b/w -40 to 85 °C and supports supply voltage range of 2.3V to 5.5V. Ideal for industrial applications requiring general purpose parallel IO functionality in compact form factor.
PCA9535DWR
PCA9535DWR by Texas Instruments is a Parallel I/O Port with 16 bits, 2.5/5 V power supplies, and 8-bit address bus width. It is used in industrial applications for general-purpose parallel I/O port operations due to its small outline package style and CMOS technology.
PCAL6416AHF,128
NXP Semiconductors PCAL6416AHF,128 is a 16-bit parallel I/O port with 1.65-5.5V supply range and -40 to 85°C operating temp. Ideal for industrial applications, it features CMOS technology, quad terminals, and nickel palladium gold finish for robust performance in various settings.
DS2408S
Maxim Integrated
DS2408S by Maxim Integrated is a CMOS technology-based Parallel I/O Port with 8 I/O lines. It operates b/w -40 to 85 °C, with supply voltage range of 2.8-5.25 V. This small outline package is ideal for industrial applications requiring general-purpose parallel I/O functionality.
PCA9539DGVRG4
PCA9539DGVRG4 by Texas Instruments is a 16-bit parallel I/O port with supply voltage range of 2.3V to 5.5V, ideal for industrial applications. It features CMOS technology, dual terminal position, and nickel palladium gold finish. This compact IC has a small outline package style and operates in temperatures from -40°C to 85°C.
SNJ54LS612JD
SNJ54LS612JD by Texas Instruments is a CMOS technology-based Parallel I/O Port with 12 I/O lines. It operates b/w -55 to 125 °C and supports supply voltages from 4.5V to 5.5V, making it ideal for military-grade applications requiring high-temperature resistance and reliable parallel data transfer capabilities.
CDP1851E
General Electric Solid State
PARALLEL IO PORT, GENERAL PURPOSE; Temperature Grade: INDUSTRIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 40; Package Code: DIP; Package Shape: RECTANGULAR;
PCF8575CPW
PCF8575CPW by Texas Instruments is a Parallel I/O Port with 16 bits, 8-bit address bus width, and 2 ports. It operates b/w -40 to 85°C, has a supply voltage range of 4.5-5.5V, and supports a clock frequency of up to 0.4MHz. Ideal for industrial applications requiring general-purpose parallel I/O interfacing in compact designs with surface-mount technology.
PCA9539APW,118
NXP Semiconductors' PCA9539APW,118 is a 16-bit parallel I/O port with max supply voltage of 5.5V and min of 1.65V. Ideal for industrial applications, it features a small outline package with dual terminals and operates in temperatures ranging from -40 to 85°C.
PCA9502BS
PCA9502BS by NXP Semiconductors is an 8-bit Parallel I/O Port with a supply voltage range of 2.3V to 2.7V, ideal for industrial applications. This CMOS technology chip carrier has a square shape and quad terminal position, suitable for surface mount assembly with a very thin profile. Operating temperature ranges from -40°C to 85°C, making it versatile for various electronic designs.
PCA9536D,118
NXP Semiconductors' PCA9536D,118 is a CMOS technology-based Parallel I/O Port with 4 bits. It operates b/w -40 to 85°C and supports supply voltages of 2.3-5.5V. Ideal for industrial applications requiring small outline packages and surface mount capabilities.
PCA9536DT
PCA9536DT by Texas Instruments is a 4-bit parallel I/O port with supply voltage ranging from 2.3V to 5.5V. It features small outline packaging, industrial temperature grade, and CMOS technology. Ideal for general purpose applications requiring compact size and low power consumption.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
TMP8243P
Toshiba
Parallel IO Ports; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 24; Package Code: DIP; Package Shape: RECTANGULAR;
TMP8255AP-5
PARALLEL IO PORT, GENERAL PURPOSE; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 40; Package Code: DIP; Package Shape: RECTANGULAR;
TMP82C43P
PARALLEL IO PORT, GENERAL PURPOSE; Temperature Grade: INDUSTRIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 24; Package Code: DIP; Package Shape: RECTANGULAR;
TMP82C55AP-2
TMP82C255AN-2
PARALLEL IO PORT, GENERAL PURPOSE; Temperature Grade: INDUSTRIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 64; Package Code: SDIP; Package Shape: RECTANGULAR;
TMP82C55AF-10
Parallel IO Ports; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 44; Package Code: QFP; Package Shape: SQUARE;
TMP82C55AF-5
TMP82C255BF-10
PARALLEL IO PORT, GENERAL PURPOSE; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 80; Package Code: QFP; Package Shape: RECTANGULAR;
TMP82C55AM-10
PARALLEL IO PORT, GENERAL PURPOSE; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 40; Package Code: SSOP; Package Shape: RECTANGULAR;
TMP82C255BF-2
TMP82C265AF-10
TMP82C265AF-2
TMP82C255AN-10
TMP82C55AF-2
TMP8156P-2
TMP8155P-2
TMP8155P
Parallel IO Ports; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 40; Package Code: DIP; Package Shape: RECTANGULAR;
TMP8156P
TMP82C265BF-10
PARALLEL IO PORT, GENERAL PURPOSE; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 80; Package Code: FQFP; Package Shape: SQUARE;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved