Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TRIAC OUTPUT OPTOCOUPLER WITH ZERO CRSVR; Mounting Feature: THROUGH HOLE MOUNT; Maximum On State Current: .1 A; Repetitive Off-state Voltage (Peak): 800 V; Maximum Operating Temperature: 85 Cel; Maximum On State Voltage: 3 V;
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
ComSIT Distribution GmbH
1+ parts
100+ parts
1k+ parts
10k+ parts
Vyrian
AZTECH Wire
$13.950
Optocoupler Trigger Device Outputs TLP3083(F attributes and parameters. Explore more Optocoupler Trigger Device Outputs devices from Toshiba
Additional Features:
Configuration:
Maximum Forward Current:
Maximum Input Trigger Current:
Maximum Isolation Voltage:
Mounting Feature:
No. of Elements:
Maximum On State Current:
Maximum On State Voltage:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Packing Method:
Minimum Peak Off-state Voltage:
Peak Surge Current:
Repetitive Off-state Voltage (Peak):
Maximum Reverse Leakage Current:
TLP3083(F Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.80.00
SB
TOSHIBA, is a Japanese multinational conglomerate corporation headquartered in Minato, Tokyo, Japan. Its diversified products and services include power, industrial and social infrastructure systems, elevators and escalators, electronic components, semiconductors, hard disk drives (HDD), printers, batteries, lighting, as well as IT solutions such as quantum cryptography which has been in development at Cambridge Research Laboratory, Toshiba Europe, located in the United Kingdom, now being commercialised.It was one of the biggest manufacturers of personal computers, consumer electronics, home appliances, and medical equipment. As a semiconductor company and the inventor of flash memory, Toshiba had been one of the top 10 in the chip industry until its flash memory unit was spun off as Toshiba Memory, later Kioxia, in the late 2010s.
LL4148
Lite-on Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM317BD2TG
Onsemi
LM317BD2TG by Onsemi is an adjustable positive single output standard regulator with a max output current of 1.5A and a max load regulation of 5.8%. Operating temperature ranges from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact designs.
2N2222A
Baneasa S A
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; Qualification: Not Qualified;
STM32H743IIT6
STMicroelectronics
STM32H743IIT6 by STMicroelectronics is a 32-bit microcontroller with integrated cache and a max supply voltage of 3.6V. It is commonly used in industrial applications due to its wide temperature range (-40°C to 85°C) and various connectivity options (CAN, I2C, UART, USB).
Taitron Components
LM317T
Motorola
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; No. of Outputs: 1; Package Equivalence Code: SIP3,.1TB;
1N4148WS
First Components International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
RC0603JR-070RL
Yageo
Yageo's RC0603JR-070RL is a SMT fixed resistor with 0 ohm resistance, rated for temperatures from -55 to 155 °C. Its metal glaze/thick film technology and 0.1 W power dissipation make it ideal for jumper applications in various electronic devices.
OPA2227UA
Texas Instruments
OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.
2N7002
Rectron
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Operating Mode: ENHANCEMENT MODE; Maximum Operating Temperature: 150 Cel; Terminal Form: GULL WING;
USB2514BI-AEZG
Microchip Technology
USB2514BI-AEZG by Microchip is a BUS CONTROLLER IC with 36 terminals, operating at 3.3V, supporting I2C, SMBUS, and USB buses. It has a clock frequency of up to 24MHz and can withstand industrial temperatures from -40°C to 85°C. This chip carrier package is surface mountable and suitable for various applications requiring USB connectivity.
CRG0805F10R
Tyco Electronics Components
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
Hitano Enterprise
SMBJ18CA
Secos
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Transpro Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; JESD-609 Code: e0; Terminal Finish: Tin/Lead (Sn/Pb); Nominal Breakdown Voltage: 21.1 V; Maximum Clamping Voltage: 29.2 V;
LL4148-GS08
Vishay Intertechnology
The Vishay Intertechnology LL4148-GS08 is a glass diode with fast recovery time of 0.008 us and max reverse current of 5 uA. Ideal for applications requiring rectification, it has a breakdown voltage of 100 V and can handle a peak forward current of 2 A.
BAV99
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM555CMX
National Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
1N4148
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
MMBT2222ALT1G
MMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, max power dissipation of 0.3W, and hFE of 75. Ideal for switching applications, it operates b/w -55 to 150 °C with a max collector-emitter voltage of 40V. This surface-mount device has a transition frequency of 300MHz and turn-on time of 35ns.
IL4208-X007T
Infineon Technologies
TRIAC OUTPUT OPTOCOUPLER; Maximum Operating Temperature: 100 Cel; Nominal Input Trigger Current: 1 mA; Maximum Isolation Voltage: 5300 V; No. of Elements: 1; Configuration: SINGLE;
IL420
Vishay Semiconductors
TRIAC OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Minimum Operating Temperature: -55 Cel; No. of Elements: 1; Additional Features: UL RECOGNIZED; Maximum Operating Temperature: 100 Cel;
TLP265J(T7-TPL,E(T
Toshiba
Toshiba's TLP265J(T7-TPL,E(T optocoupler features 2.8V max on-state voltage, 1.2A peak surge current, and 85°C max operating temp. Ideal for triggering devices in applications requiring high isolation voltage of 3750V, such as industrial control systems and power supplies.
FODM3012V
FODM3012V by Onsemi is a single TRIAC output optocoupler with a max on-state voltage of 3V and forward current of 0.06A. It operates b/w -40 °C to 100°C, has an isolation voltage of 3750V, and is ideal for applications requiring optocoupler trigger device outputs in surface mount configurations.
MOC3022VM
The Onsemi MOC3022VM is a single TRIAC output optocoupler with a max on-state voltage of 3V and peak surge current of 1A. It operates b/w -40 to 85°C, has an isolation voltage of 5300V, and is ideal for triggering devices in applications requiring high-voltage protection.
TLP265J(TPR,E(T
Toshiba's TLP265J(TPR,E(T optocoupler has a max on-state voltage of 2.8V, peak surge current of 1.2A, and isolation voltage of 3750V. Ideal for triggering devices in applications requiring high voltage protection and signal isolation in temperatures ranging from -25 to 85°C.
MOC3020SR2M
Fairchild Semiconductor
TRIAC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Maximum Operating Temperature: 85 Cel; Minimum Peak Off-state Voltage: 400 V; Nominal Input Trigger Current: 30 mA;
MOC3061SVM
The Onsemi MOC3061SVM is a single optocoupler with a max on-state voltage of 3V and peak surge current of 1A. It operates b/w -40 to 85°C, has an isolation voltage of 7500V, and is ideal for triggering devices in applications requiring high voltage protection.
MOC3063SR2VM
TRIAC OUTPUT OPTOCOUPLER WITH ZERO CRSVR; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Minimum Operating Temperature: -40 Cel; Additional Features: UL RECOGNIZED, VDE APPROVED; Minimum Peak Off-state Voltage: 600 V;
MOC3021M
The Onsemi MOC3021M is a single TRIAC output optocoupler with a max on-state voltage of 3V and peak surge current of 1A. It operates b/w -40 to 85°C, has an isolation voltage of 5300V, and is ideal for triggering devices in applications requiring high-voltage protection.
FOD4208TV
TRIAC OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Maximum Forward Current: .03 A; JESD-609 Code: e3; Nominal Input Trigger Current: .75 mA; Additional Features: UL RECOGNIZED, VDE APPROVED;
MOC3063M
TRIAC OUTPUT OPTOCOUPLER WITH ZERO CRSVR; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Matte Tin (Sn); Additional Features: UL RECOGNIZED; Minimum Operating Temperature: -40 Cel; Minimum Peak Off-state Voltage: 600 V;
TLP3052
Toshiba's TLP3052 is a single TRIAC output optocoupler with max. forward current of 0.025A and isolation voltage of 5000V. Operating b/w -25°C to 85°C, it has a min. trigger current of 5mA and min. peak off-state voltage of 600V. Ideal for applications requiring high-voltage isolation and reliable triggering in various electronic circuits.
BRT22H-X007
Vishay Intertechnology's BRT22H-X007 is a single optocoupler with TRIAC output. It has a max forward current of 0.02A, isolation voltage of 5300V, and peak off-state voltage of 600V. Ideal for applications requiring trigger devices in environments ranging from -40 to 100°C.
MOC3042SR2VM
MOC3042SR2VM by Onsemi is a single optocoupler with a max on-state voltage of 3V and peak surge current of 1A. It is ideal for triggering devices, featuring a triac output and high isolation voltage of 7500V. With surface mounting feature, it operates b/w -40 to 85°C, making it suitable for various applications requiring precise control.
BRT12H-X007T
Vishay Intertechnology's BRT12H-X007T is a single TRIAC output optocoupler with a max forward current of 0.02A and isolation voltage of 5300V. It operates b/w -40°C to 100°C, ideal for applications requiring high voltage switching such as industrial control systems and motor controls.
MOC3061M
Lite-on Technology
TRIAC OUTPUT OPTOCOUPLER WITH ZERO CRSVR; Minimum Operating Temperature: -40 Cel; Minimum Peak Off-state Voltage: 600 V; No. of Elements: 1; Nominal Input Trigger Current: 15 mA; Maximum Isolation Voltage: 5000 V;
IL4118-X016
TRIAC OUTPUT OPTOCOUPLER WITH ZERO CRSVR; Terminal Finish: Matte Tin (Sn); No. of Elements: 1; Nominal Input Trigger Current: .7 mA; Minimum Operating Temperature: -55 Cel; Maximum Isolation Voltage: 5300 V;
FODM3083V
The Onsemi FODM3083V is a single TRIAC output optocoupler with max forward current of 0.06A and isolation voltage of 3750V. It operates b/w -40 to 100 °C, suitable for triggering devices in various applications like motor controls and solid-state relays.
MOC3033SR2M
TRIAC OUTPUT OPTOCOUPLER WITH ZERO CRSVR; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Minimum Peak Off-state Voltage: 250 V; No. of Elements: 1; Nominal Input Trigger Current: 5 mA;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
TLP3063(S,C,F)
TRIAC OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Maximum On State Voltage: 3 V; Maximum Operating Temperature: 100 Cel; Minimum Operating Temperature: -40 Cel; Maximum Input Trigger Current: .005 A;
TLP3062(S)
TRIAC OUTPUT OPTOCOUPLER WITH ZERO CRSVR; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); Minimum Operating Temperature: -25 Cel; Additional Features: UL RECOGNIZED; Maximum Operating Temperature: 85 Cel;
TLP3083(TP1,F
Toshiba's TLP3083(TP1,F is a single TRIAC output optocoupler with 3V max on-state voltage and 1.2A peak surge current. Ideal for triggering devices, it offers 800V repetitive off-state voltage and 5000V isolation voltage, making it suitable for applications requiring high reliability in temperatures ranging from -25 to 85°C.
TLP3062A(F(O
TRIAC OUTPUT OPTOCOUPLER WITH ZERO CRSVR; Mounting Feature: THROUGH HOLE MOUNT; Peak Surge Current: 1.2 A; No. of Elements: 1; Packing Method: MAGAZINE; Maximum Reverse Leakage Current: .00001 A;
TLP3062A(F
Toshiba's TLP3062A(F) is a single optocoupler with peak surge current of 1.2A and max forward current of 0.025A. Ideal for triggering devices, it features a triac output with zero cross voltage and offers high isolation voltage of 5000V. Operating temp ranges from -25 to 85°C, making it suitable for various applications requiring reliable signal transmission.
TLP3062AF(TP4,F(O
TRIAC OUTPUT OPTOCOUPLER WITH ZERO CRSVR; Mounting Feature: SURFACE MOUNT; Packing Method: TR; Configuration: SINGLE; Additional Features: UL APPROVED; Maximum On State Voltage: 3 V;
TLP3062(S,C,F)
TRIAC OUTPUT OPTOCOUPLER WITH ZERO CRSVR; Mounting Feature: THROUGH HOLE MOUNT; Nominal Input Trigger Current: 5 mA; Additional Features: UL RECOGNIZED; Maximum Isolation Voltage: 5000 V; Maximum Reverse Leakage Current: .00001 A;
TLP3052A(F(O
Toshiba's TLP3052A(F(O) optocoupler has a max on-state voltage of 3V, peak surge current of 1.2A, and isolation voltage of 5000V. Ideal for triggering devices in applications requiring high electrical isolation and protection against voltage surges.
TLP3083(TP1,F(O
TRIAC OUTPUT OPTOCOUPLER WITH ZERO CRSVR; Mounting Feature: SURFACE MOUNT; Maximum Operating Temperature: 85 Cel; Maximum Input Trigger Current: .005 A; Packing Method: TR; Maximum Isolation Voltage: 5000 V;
TLP3052A(TP1,F
Toshiba's TLP3052A(TP1,F is a single TRIAC output optocoupler with peak surge current of 1.2A, max forward current of 0.025A, and isolation voltage of 5000V. Ideal for triggering devices in applications requiring high voltage protection and surface mounting feature.
TLP3052AF(D4,F(O
Toshiba's TLP3052AF(D4,F(O optocoupler has a max on-state voltage of 3V, peak surge current of 1.2A, and isolation voltage of 5000V. Ideal for triggering devices in applications requiring high voltage protection and signal isolation.
TLP3052AF(D4TP4F(O
Toshiba's TLP3052AF(D4TP4F(O is a single TRIAC output optocoupler with max on-state voltage of 3V, peak surge current of 1.2A, and isolation voltage of 5000V. Ideal for triggering devices in applications requiring high isolation levels and surface mounting feature. Operating temp range -25 to 85°C makes it versatile for various environments.
TLP3052AF(F(O
TRIAC OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Maximum Operating Temperature: 85 Cel; Maximum On State Current: .1 A; No. of Elements: 1; Minimum Operating Temperature: -25 Cel;
TLP3062A(D4TP1,F(O
Toshiba's TLP3062A(D4TP1,F(O) is a single configuration optocoupler trigger device with a max on-state voltage of 3V. It has a peak surge current of 1.2A and can operate at temperatures ranging from -25 to 85 °C. This device is commonly used in applications requiring high isolation voltage and zero-crossing triac output.
TLP3052A(D4,F(O
TRIAC OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Additional Features: UL APPROVED, VDE APPROVED; Maximum On State Current: .1 A; Maximum Operating Temperature: 85 Cel; Maximum Reverse Leakage Current: .00001 A;
TLP3052A(D4TP1,F(O
TRIAC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Maximum Operating Temperature: 85 Cel; Maximum On State Voltage: 3 V; Maximum Forward Current: .025 A; Packing Method: TR;
TLP3052A(D4TP5,F(O
TRIAC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Maximum Isolation Voltage: 5000 V; No. of Elements: 1; Minimum Peak Off-state Voltage: 600 V; Additional Features: UL APPROVED, VDE APPROVED;
TLP3052A(TP5,F(O
TRIAC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Minimum Peak Off-state Voltage: 600 V; Maximum Isolation Voltage: 5000 V; Additional Features: UL APPROVED; Configuration: SINGLE;
TLP3083F(D4,TP4F
Toshiba's TLP3083F(D4,TP4F) is a single TRIAC output optocoupler with zero cross voltage suitable for optocoupler trigger device outputs. It features a max on-state voltage of 3V, peak surge current of 1.2A, and isolation voltage of 5000V. Ideal for applications requiring precise triggering and high isolation levels in temperatures ranging from -25°C to 85°C.
TLP3083F(TP4,F
TLP3083F(TP4,F by Toshiba is a single optocoupler trigger device with a max on-state voltage of 3V and peak surge current of 1.2A. It is commonly used in applications requiring TRIAC output optocouplers with zero CRSVR, such as in surface mount configurations for high isolation voltage up to 5000V.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved