Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Toshiba's TLP292-4(TPR,E is a 4-channel optocoupler with max. forward current of 0.05A, ideal for AC input-transistor output applications. With max. operating temp of 125°C and min. isolation voltage of 3750V, it offers reliable performance in various circuits. Featuring surface mounting, this optocoupler has a min C-E breakdown voltage of 80V and low dark current at 80nA.
Median Price
$1.695
Lifecycle Status
Suppliers In-Stock
4
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$1.660
100+ parts
$0.894
1k+ parts
$0.725
10k+ parts
$0.603
DigiKey
$1.730
$0.930
$0.754
-
Nova Conductors
$0.635
Vyrian
Advanced Electronics
$0.408
$0.387
Corohmni
$0.505
Continental Prestige Electronics
$0.622
Netroflash
Argo Parts USA
$0.616
Aztec Data Supply Inc.
$0.740
Semicontronic
$1.410
$1.375
$1.368
Ampacity Inc.
$3.070
Robosynatics
Lucentia Tech
Allows for the independent control of 4 channels, providing flexibility in design and application.
Can handle a maximum current of 0.05 A, making it suitable for low-power applications.
AC input with transistor output provides reliable signal transmission and isolation in electronic circuits.
Can operate at high temperatures up to 125°C, ensuring reliable performance in demanding environments.
Operates at low temperatures as well, down to -55°C, allowing for a wide range of applications.
With a maximum power dissipation of 0.1 W, it can handle heat effectively and maintain stable operation.
Provides a minimum current transfer ratio of 50%, ensuring efficient and accurate signal transmission.
Low dark current of 80 nA minimizes leakage current and ensures signal integrity in low-light conditions.
Includes 4 separate optocoupler channels, providing multiple signal isolation options in a single package.
Packaged in a robust plastic enclosure with a standard 13-inch tape and reel packaging for ease of handling and storage.
Has a minimum collector-emitter breakdown voltage of 80 V, ensuring reliable operation and protection against voltage spikes.
Provides high isolation voltage of 3750 V, suitable for applications requiring galvanic isolation and voltage protection.
Surface mount design for easy and efficient PCB assembly, saving space and allowing for automated production.
Operates with a maximum forward voltage of 1.4 V, ensuring efficient energy conversion and minimal power losses.
Capable of handling a maximum on-state current of 0.05 A, providing reliable signal transmission and current switching capabilities.
Optocoupler Transistor Outputs TLP292-4(TPR,E attributes and parameters. Explore more Optocoupler Transistor Outputs devices from Toshiba
Additional Features:
Minimum Collector-emitter Breakdown Voltage:
Configuration:
Minimum Current Transfer Ratio:
Maximum Dark Current:
Maximum Forward Current:
Maximum Forward Voltage:
Maximum Isolation Voltage:
Mounting Feature:
No. of Elements:
Maximum On State Current:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Packing Method:
Maximum Power Dissipation:
TLP292-4(TPR,E Optoelectronics trade compliance attributes, and parameters.
ECCN
3A001.A.2.C
ECCN Governance
EAR
HTS
8541.40.80.00
SB
PCN Design/Specification - Mult Dev Design Chg 28/Aug/2020 Mult Dev Marking Chg 1/Dec/2020
TOSHIBA, is a Japanese multinational conglomerate corporation headquartered in Minato, Tokyo, Japan. Its diversified products and services include power, industrial and social infrastructure systems, elevators and escalators, electronic components, semiconductors, hard disk drives (HDD), printers, batteries, lighting, as well as IT solutions such as quantum cryptography which has been in development at Cambridge Research Laboratory, Toshiba Europe, located in the United Kingdom, now being commercialised.It was one of the biggest manufacturers of personal computers, consumer electronics, home appliances, and medical equipment. As a semiconductor company and the inventor of flash memory, Toshiba had been one of the top 10 in the chip industry until its flash memory unit was spun off as Toshiba Memory, later Kioxia, in the late 2010s.
1N4148WS
Hitano Enterprise
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
EU2B-YS3103F
Idec
ROTARY SWITCH;
DS18B20+
Analog Devices
DS18B20+ by Analog Devices is a 12-bit temperature sensor with 3.3/5V supply, -55 to 125°C range, and ±0.50°C accuracy. It features a 1-Wire interface for digital output and is commonly used in applications requiring precise temperature monitoring in various industries.
1N4148
Grande Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
M24308/2-1F
Amphenol
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body or Shell Style: RECEPTACLE; Body Length: 1.228 inch; No. of Rows Loaded: 2;
CC0603KRX7R9BB104
Yageo
Yageo's CC0603KRX7R9BB104 is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. With X7R temperature characteristics, it operates b/w -55 to 125°C. Ideal for surface mount applications in electronics due to its compact size of 1.6mm x 0.8mm x 0.8mm and wraparound terminals.
2N2222A
Aeroflex/metelics
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Package Shape: ROUND; Transistor Application: SWITCHING;
Kec
RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Non Repetitive Peak Forward Current: 2 A; Config: SINGLE; Maximum Operating Temperature: 200 Cel;
BAV99
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
INA826AIDGKR
Texas Instruments
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
ERJ2RKF1002X
Panasonic
Panasonic's ERJ2RKF1002X is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and operating temperature range of -55 to 155 °C.
C1210C104K5RACTU
KEMET Corporation
KEMET C1210C104K5RACTU is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics and ±10% tolerance, suitable for surface mount applications in a wide temperature range from -55°C to 125°C. Its compact rectangular package makes it ideal for various electronic devices.
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
BSS138
Sipex
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Moisture Sensitivity Level (MSL): 1; Peak Reflow Temperature (C): 240;
SS14
Leshan Radio
RECTIFIER DIODE; Surface Mount: YES; Config: SINGLE; No. of Phases: 1; No. of Elements: 1; Maximum Forward Voltage (VF): .5 V;
OPA2277UA
OPA2277UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 100 uV and micropower consumption of 1.65 mA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1000 kHz in a small outline package.
1N4148WT
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Eic Semiconductor
ULN2803ADW
ULN2803ADW by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates b/w -40 to 85 °C and has a max supply voltage of 3 V. Ideal for applications requiring buffer or inverter-based peripheral drivers with sink current flow direction.
Rugao Dachang Electronic
TLP290-4(GB-TP,E(T
Toshiba
Toshiba TLP290-4(GB-TP,E(T optocoupler features 4 channels, 0.05A forward current, and 100% current transfer ratio. With a max isolation voltage of 2500V, it's ideal for applications requiring high electrical isolation like industrial automation and power supplies. Operating temp ranges from -55 to 110°C.
6N139S
North American Philips Discrete Products Div
Optocoupler - Transistor Outputs; Mounting Feature: SURFACE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Power Dissipation: .1 W; JESD-609 Code: e0; Maximum On State Current: .06 A;
H11G1SR2VM
Onsemi
The Onsemi H11G1SR2VM is a single optocoupler with a Darlington output, ideal for applications requiring high isolation voltage of 7500V. It features a max forward current of 0.06A and min operating temperature of -40°C, making it suitable for use in various electronic circuits where reliable signal transmission is crucial. With a min current transfer ratio of 1000%, this surface-mount device offers efficient performance in demanding environments.
TLP185(SE(T
Toshiba's TLP185(SE(T optocoupler features 0.05A max forward current, 50% min current transfer ratio, and 3750V max isolation voltage. Ideal for applications requiring high voltage isolation in a compact surface mount configuration.
LTV-356TC
Lite-on Technology
LTV-356TC by Lite-on Technology is a single optocoupler with a max forward current of 0.05A and collector-emitter breakdown voltage of 80V. With a min operating temperature of -55°C and max isolation voltage of 3750V, it is ideal for applications requiring high electrical isolation and low power dissipation. Its fast response time of 18μs makes it suitable for use in various electronic circuits.
CNY172SR2M
CNY172SR2M by Onsemi is a SINGLE optocoupler with max. forward current of 0.06A, min. transfer ratio of 63%, and max. isolation voltage of 4170V. Ideal for applications requiring high-speed response times and reliable electrical isolation in temperatures ranging from -40 to 100°C.
TLP521-4GR
Isocom Components
TLP521-4GR by Isocom Components is a 4-channel optocoupler with separate configuration. It has a max forward current of 0.05A and min current transfer ratio of 100%. Ideal for applications requiring high isolation voltage up to 5300V, such as in industrial control systems.
LTV-247
LTV-247 by Lite-on Technology is a 4-channel optocoupler with max forward current of 0.05A and isolation voltage of 3750V. Ideal for applications requiring high collector-emitter breakdown voltage, such as industrial automation systems and power supply units. Operating temp range: -55 to 110°C.
HCNR200-300E
Agilent Technologies
Optocoupler - Transistor Outputs; Mounting Feature: SURFACE MOUNT; Maximum Isolation Voltage: 5000 V; Maximum Forward Voltage: 1.85 V; Maximum Operating Temperature: 85 Cel; No. of Elements: 1;
PS2501L-1-F3-A
Nec Electronics America
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: TIN BISMUTH/NICKEL PALLADIUM GOLD; JESD-609 Code: e6/e4; Maximum Isolation Voltage: 5000 V; Maximum Forward Current: .08 A; Configuration: SINGLE;
4N35
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Matte Tin (Sn); Maximum On State Current: .1 A; Maximum Forward Current: .06 A; Configuration: SINGLE;
HMHA2801
The Onsemi HMHA2801 is a single optocoupler with max forward current of 0.05A, ideal for applications requiring high isolation voltage up to 3750V. Featuring a transistor output and operating temperature range from -55°C to 100°C, it offers a min CTR of 80% and low dark current at 100nA.
4N25-V
Everlight Electronics
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Maximum Response Time: .00001 s; Nominal Current Transfer Ratio: 20 %; Maximum Dark Current: 50 nA; No. of Elements: 1;
Intersil
Optocoupler - Transistor Outputs; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); Minimum Operating Temperature: -55 Cel; Maximum Forward Current: .06 A; No. of Elements: 1;
JANTX4N49U
Defense Logistics Agency
JANTX4N49U by Defense Logistics Agency is a SINGLE optocoupler with max forward current of 0.04A, operating temp range -55 to 125 °C. It features collector-emitter breakdown voltage of 40V, isolation voltage up to 1000V, and nominal current transfer ratio of 200%. Ideal for applications requiring high isolation and signal transfer in harsh environments.
ILQ2
Infineon Technologies
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Tin/Lead (Sn/Pb); Nominal Current Transfer Ratio: 200 %; Maximum Operating Temperature: 100 Cel; Minimum Operating Temperature: -40 Cel; Minimum Collector-emitter Breakdown Voltage: 70 V;
OPI1264B
Optek Technology
TRANSISTOR OUTPUT OPTOCOUPLER; Nominal Current Transfer Ratio: 50 %; Configuration: SINGLE; Additional Features: UL RECOGNIZED; Maximum Dark Current: 200 nA; Maximum Isolation Voltage: 10000 V;
HCPL-181-00CE
Broadcom
Broadcom's HCPL-181-00CE is a SINGLE optocoupler with 0.05A forward current, 100°C max temp, and 3750V isolation voltage. Ideal for applications requiring high-speed response time and surface mounting feature.
Nec Compound Semiconductor Devices
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Tin/Bismuth (Sn/Bi); Configuration: SINGLE; Additional Features: UL RECOGNIZED; Nominal Current Transfer Ratio: 300 %; Maximum Forward Current: .08 A;
TLP127(TPR)
Toshiba's TLP127(TPR) is a single optocoupler with built-in diode and resistor. It features a max forward current of 0.025A, Darlington output, and 4000% nominal current transfer ratio. Ideal for applications requiring high isolation voltage up to 2500V, such as industrial control systems and power supplies.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
TLP291-4(GB-TP,E(T
Toshiba's TLP291-4(GB-TP,E(T) is a 4-channel optocoupler with max. forward current of 0.05A, ideal for applications requiring high isolation voltage up to 2500V. With a min. operating temp of -55°C and max. power dissipation of 0.1W, it offers reliable performance in various industrial settings. Its surface mount feature makes installation easy while ensuring optimal functionality.
TLP291-4(GB-TP,E
Toshiba's TLP291-4(GB-TP,E is a 4-channel optocoupler with separate configuration. It has a max forward current of 0.05A, min operating temp of -55°C, and max isolation voltage of 2500V. Ideal for applications requiring high current transfer ratio, low dark current, and surface mounting feature.
TLP291(GB-TP,SE(T
Toshiba's TLP291(GB-TP,SE(T optocoupler features 0.05A max forward current, 100% transfer ratio, and 3750V isolation voltage. Ideal for applications requiring single transistor output optocouplers with -55 to 110°C operating range and 80V min breakdown voltage.
TLP293-4(GB-TP,E(T
Toshiba's TLP293-4(GB-TP,E(T) is a 4-channel optocoupler with max. forward current of 0.05A, ideal for applications requiring high isolation voltage up to 3750V. With a collector-emitter breakdown voltage of 80V and operating temperature range from -55°C to 125°C, it offers reliable performance in various industrial settings. The device features a nominal current transfer ratio of 100% and low dark current of 80nA, making it suitable for demanding optoelectronic applications.
TLP291-4(GB,E
Toshiba's TLP291-4(GB,E is a 4-channel optocoupler with separate configuration. It has a max forward current of 0.05A and min transfer ratio of 100%. Ideal for applications requiring high isolation voltage up to 2500V, such as in industrial control systems.
TLP291-4(TP,E)
Toshiba's TLP291-4(TP,E) is a 4-channel optocoupler with max. forward current of 0.05A, ideal for applications requiring high isolation voltage up to 2500V. With a min. operating temp of -55°C and max. power dissipation of 0.1W, it offers reliable performance in various circuits needing transistor output optocouplers.
TLP291-4(TP,E
Toshiba's TLP291-4(TP,E is a 4-channel optocoupler with separate configuration. It has a max forward current of 0.05A and operates b/w -55°C to 110°C. With a min CTR of 50%, it offers high isolation voltage of 2500V, making it ideal for surface mount applications requiring reliable signal transmission.
TLP291-4(TP,E(T
Toshiba's TLP291-4(TP,E(T) is a 4-channel optocoupler with separate configuration. It has a max forward current of 0.05A and operates b/w -55°C to 110°C. Ideal for applications requiring high isolation voltage and low power dissipation in surface mount setups.
TLP291-4(GB
Toshiba's TLP291-4(GB) is a 4-channel optocoupler with separate configuration. It has a max forward current of 0.05A and min transfer ratio of 100%. Ideal for applications requiring high isolation voltage (2500V) and surface mounting feature in temperature range -55 to 110°C.
TLP293-4(GB,E
Toshiba's TLP293-4(GB,E is a 4-channel optocoupler with separate configuration. It has a max forward current of 0.05A and min transfer ratio of 100%. Ideal for applications requiring high isolation voltage up to 3750V, such as in industrial automation systems.
TLP291-4(E(T
Toshiba's TLP291-4(E(T) is a 4-channel optocoupler with max. forward current of 0.05A, operating temp. range from -55 to 110°C, and max. isolation voltage of 2500V. Ideal for applications requiring high voltage isolation and signal transmission in industrial electronics and automation systems.
TLP293(GB-TPL,E(T
Toshiba's TLP293(GB-TPL,E(T) is a single optocoupler with max. forward current of 0.05A, ideal for applications requiring high isolation voltage up to 3750V. With a min C-E breakdown voltage of 80V and surface mount feature, it operates b/w -55°C to 125°C efficiently.
TLP291-4
Toshiba's TLP291-4 is a 4-channel optocoupler with max. forward current of 0.05A, ideal for applications requiring high isolation voltage (2500V) and surface mounting feature. With a min. operating temp of -55°C and max. power dissipation of 0.1W, it offers reliable performance in various electronic circuits.
TLP291(GB,SE
Toshiba TLP291(GB,SE optocoupler has a max forward current of 0.05A and isolation voltage of 3750V. With a collector-emitter breakdown voltage of 80V, it's ideal for applications requiring high electrical isolation in temperatures ranging from -55 to 110°C.
TLP291-4(GB,E(T
Toshiba TLP291-4(GB,E(T) is a 4-channel optocoupler with separate configuration. It has a max forward current of 0.05A and operates b/w -55 to 110°C. Ideal for applications requiring high isolation voltage, low dark current, and surface mounting feature.
TLP293-4(E(T
Toshiba's TLP293-4(E(T optocoupler features 4 separate channels with a max forward current of 0.05A. With a min transfer ratio of 50%, it offers high isolation voltage of 3750V, making it ideal for applications requiring reliable signal transmission in harsh environments.
TLP291(GR-TP,SE(T
Toshiba's TLP291(GR-TP,SE(T optocoupler features a max forward current of 0.05A, 100% current transfer ratio, and 3750V isolation voltage. Ideal for applications requiring high-voltage protection and signal transmission in temperature ranges from -55°C to 110°C.
TLP293-4(GB,E(T
Toshiba's TLP293-4(GB,E(T) is a 4-channel optocoupler with max. forward current of 0.05A and max. power dissipation of 0.1W. Ideal for applications requiring high isolation voltage (3750V), such as industrial control systems and power supplies due to its transistor output configuration and high collector-emitter breakdown voltage of 80V.
TLP293-4(GB-TP,E
Toshiba's TLP293-4(GB-TP,E is a 4-channel optocoupler with separate configuration. It has a max forward current of 0.05A and min current transfer ratio of 100%. Ideal for applications requiring high isolation voltage up to 3750V, such as in industrial control systems.
TLP281-4(GB-TP,J,F
Toshiba's TLP281-4(GB-TP,J,F) is a 4-channel optocoupler with a max forward current of 0.05A and an isolation voltage of 2500V. It operates in temperatures ranging from -55 to 100 °C and has a min collector-emitter breakdown voltage of 80V. This optocoupler is commonly used for applications requiring electrical isolation b/w high-voltage systems and low-voltage control circuits.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved