Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
XC6216D332PR-G by Torex Semiconductor is a fixed positive single output standard regulator with 3.3V nominal output voltage, 2% voltage tolerance, and 0.15A max output current. Ideal for applications requiring stable power supply in compact spaces due to its small outline and low profile package style.
Median Price
$1.010
Lifecycle Status
Suppliers In-Stock
13
In-Stock Inventory
1k+
DigiKey
1+ parts
100+ parts
$0.580
1k+ parts
$0.520
10k+ parts
-
Mouser Electronics
$0.501
$0.469
Newark
$1.040
$0.596
$0.535
Distrelec
$1.375
$1.032
$0.946
Element14
$2.380
$0.881
$0.652
$0.622
Avnet
Chip1Stop
$0.703
$0.467
$0.420
Verical
Farnell
$0.598
$0.382
$0.371
Nova Conductors
$0.508
Ozdisan Elektronik
$1.357
Vyrian
Sensible Micro Corp
Argo Parts USA
$0.493
Netroflash
Advanced Electronics
$0.519
Corohmni
$8.507
Perfect Parts
Assy Fe
Continental Prestige Electronics
$0.591
$0.375
$0.355
Kepictronics
Provides durability and reliability for long-term use.
Easy to install on PCBs, saving time and effort.
Ensures stable and consistent output voltage.
Suitable for a wide range of operating conditions.
Enhances conductivity and ensures good solderability.
Stable output voltage for various applications.
Provides sufficient current for powering small circuits.
Fixed Regulators - Positive Single Output Standard XC6216D332PR-G attributes and parameters. Explore more Fixed Regulators - Positive Single Output Standard devices from Torex Semiconductor
Adjustability:
Nominal Dropout Voltage-1:
Maximum Input Voltage Absolute:
Maximum Input Voltage:
Minimum Input Voltage:
JESD-30 Code:
JESD-609 Code:
Length:
Maximum Line Regulation:
Maximum Load Regulation:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Outputs:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Maximum Output Current-1:
Maximum Output Voltage-1:
Minimum Output Voltage-1:
Nominal Output Voltage-1:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Packing Method:
Peak Reflow Temperature (C):
Qualification Status:
Regulator Type:
Maximum Seated Height:
Sub-Category:
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Maximum Voltage Tolerance:
Width:
XC6216D332PR-G Regulators trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
TOREX is an analog CMOS professional group that specializes in power ICs. Taking advantage of the specialized knowledge and flexibility we have as a dedicated manufacturer, we respond quickly to the development needs of electronic devices, which never cease to become smaller and lighter. Our pride is in each product that is so small it is almost invisible, realized by means of our unique ultra-small package technology. The size may be ultra-small, but the impact is unlimited. From familiar mobile devices such as smartphones, digital cameras and computers, to in-vehicle systems such as car navigation, ETC in-vehicle devices and power windows, and even industrial equipment such as robots, the performance of our products has a reputation for excellence in every field. With sophisticated technology, strong marketing, and a forward-looking response to environmental concerns, TOREX will continue to pioneer new paths in power ICs.
1N4148WS
Multicomp Pro
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Leshan Radio
RECTIFIER DIODE; Surface Mount: YES; Maximum Non Repetitive Peak Forward Current: 2 A; Maximum Reverse Recovery Time: .004 us; No. of Phases: 1; Maximum Operating Temperature: 175 Cel;
AT90CAN128-16AUR
Microchip Technology
AT90CAN128-16AUR by Microchip: 16 MHz clock, 8-bit data RAM, and 131072 ROM words. Ideal for industrial applications with CAN, SPI, TWI connectivity and low power mode. Contains 4 timers, 8 ADC channels, and supports up to 10-bit analog to digital conversion.
SMBJ18CA
Rectron
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Electronic Transistors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Synsemi
LM317T
Integrated Power Semiconductors
Other Regulators; No. of Terminals: 3; Operating Temperature (TJ-Min): 0 Cel; Terminal Pitch: 2.54 mm; Maximum Load Regulation (%): 1.5 %; Nominal Dropout Voltage-1: 3 V;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
ABS07-32.768KHZ-T
Abracon
Abracon ABS07-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring 0.032768 MHz frequency precision in a compact surface-mount design with gold over nickel finish.
BAV99
Onsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
C0603X104K5RACAUTO
KEMET Corporation
C0603X104K5RACAUTO by KEMET Corp is a ceramic capacitor with capacitance of 0.1 uF and rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate b/w -55 to 125 °C. This SMT package is commonly used in automotive applications due to its AEC-Q200 reference standard.
Vishay Semiconductors
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
Vishay Intertechnology
Vishay Intertechnology's BSS138 is a N-CHANNEL FET with SINGLE configuration and ENHANCEMENT MODE operation. It features 0.35W power dissipation, METAL-OXIDE SEMICONDUCTOR tech, and 150°C max temp. Ideal for surface mount applications in various electronic circuits requiring efficient power management.
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Package Shape: ROUND;
1N4148
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Surface Mount: NO; Config: SINGLE; Peak Reflow Temperature (C): 260; No. of Phases: 1; Diode Element Material: SILICON;
Tesla Elektronicke Soucastky
MMSZ5245BT1G
MMSZ5245BT1G by Onsemi is a Zener diode with 15V nominal reference voltage, 8.5mA test current, and 16 ohm dynamic impedance. It is used in applications requiring precise voltage regulation in a compact SMD package for temperatures ranging from -55 to 150°C.
BSS138-7-F
SPC TECHNOLOGY/ MULTICOMP
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain Current (ID): .2 A; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
Promax-johnton
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM317AEMP/NOPB
Texas Instruments
LM317AEMP/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and a max output current of 1.5A. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring precise voltage regulation in a compact package.
LM340T-12
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 4 %;
MIC5504-3.3YMT-T5
Micrel
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 4; Package Code: SON; Terminal Form: NO LEAD; Maximum Input Voltage Absolute: 6 V; Maximum Voltage Tolerance: 3 %;
5962-8778201UA
International Rectifier Hirel Products
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: PIN/PEG; Maximum Voltage Tolerance: 6 %; JESD-30 Code: R-XSFM-P3; Maximum Input Voltage: 25 V;
UA7805CKCS
UA7805CKCS by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and a max output current of 1.5A. It is commonly used in applications that require regulated power supply, such as electronic devices and circuits.
AS78L05RTR-G1
Diodes Incorporated
AS78L05RTR-G1 by Diodes Inc. is a fixed positive single output standard regulator with 5% voltage tolerance, 5V nominal output, and 0.1A max current. It operates b/w -40 to 125°C making it suitable for various electronic applications requiring stable 5V power supply in compact SOT package.
L7805ACP
STMicroelectronics
L7805ACP by STMicroelectronics is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1A. It operates within a temperature range of 0-125°C, making it suitable for various electronic applications requiring stable voltage regulation in through-hole mounting configurations.
MC78M05CDT-TP
Micro Commercial Components
MC78M05CDT-TP by Micro Commercial Components is a fixed positive single output standard regulator with 5V nominal output voltage and 0.5A max output current. It operates b/w 0 to 125°C, suitable for applications requiring stable voltage regulation in compact spaces with its small outline package style.
MIC5504-3.1YMT-TR
LM78L05ACZ/LFT7
LM78L05ACZ/LFT7 by Texas Instruments is a fixed positive single output standard regulator with 5V nominal output voltage, 0-125 °C operating temperature range, and 0.1A max output current. Ideal for applications requiring stable voltage supply in electronic circuits with limited space constraints.
S-1335G11-A4T2U3
Seiko Instruments Usa
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 4; Package Code: HVSSOF; Terminal Form: FLAT; Minimum Input Voltage: 1.5 V; Package Shape: RECTANGULAR;
MC78L08ACPG
MC78L08ACPG by Onsemi is a fixed positive single output standard regulator with an 8V nominal output voltage and 0.1A max output current. It has a min input voltage of 10.5V, operating temperature range from 0 to 125°C, and offers low load regulation at 0.08%. Ideal for applications requiring stable voltage supply in electronic circuits.
MC78M05BDT
Motorola
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 2; Package Code: TO-252; Terminal Form: GULL WING; Maximum Voltage Tolerance: 5 %; No. of Functions: 1;
TPS70933QDRVRQ1
TPS70933QDRVRQ1 by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 3.3V and max current of 0.15A. Operating temperature ranges from -40 to 125°C, making it suitable for automotive applications requiring stable power supply in harsh environments. Its small outline package with no lead terminals and very thin profile enhances space efficiency in compact designs.
KA78M05TU
Fairchild Semiconductor
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
NCV7805ABD2TR4G
NCV7805ABD2TR4G by Onsemi is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1A. It operates in temperatures ranging from -40 to 125°C, making it suitable for automotive applications requiring stable power supply. With AEC-Q100 screening level, this bipolar technology regulator ensures reliable performance in harsh environments.
UA78M05IDCYR
UA78M05IDCYR by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 0.5A. Operating temperature ranges from -40°C to 125°C, making it suitable for various electronic applications requiring stable voltage regulation in a compact package. This surface-mount device features a moisture sensitivity level of 2 and can handle input voltages up to 30V, ideal for power management in small electronic devices.
MC7805CT
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Package Shape: RECTANGULAR; Minimum Output Voltage-1: 4.85 V; Qualification Status: Not Qualified;
XC6216C202PR
Torex Semiconductor
XC6216C202PR by Torex Semiconductor is a CMOS technology fixed positive single output standard regulator with 6 terminals. It has a max load regulation of 0.09% and can handle up to 0.05A output current, making it ideal for applications requiring precise voltage regulation in compact spaces at temperatures ranging from -40°C to 85°C.
UA78L15ACDR
UA78L15ACDR by Texas Instruments is a fixed positive single output standard regulator with an operating temperature range of 0 to 125°C. It has a max output current of 0.1A and can handle input voltages up to 30V, making it suitable for various applications requiring stable voltage regulation in a compact package.
L7815CD2T-TR
L7815CD2T-TR by STMicroelectronics is a fixed positive single output standard regulator with an output voltage of 15V and max current of 1A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation in electronic circuits.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
XC6216B332MR-G
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 5; Package Code: LSSOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 30 V; Maximum Voltage Tolerance: 2 %;
XC6202P502MR
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 5; Package Code: LSSOP; Terminal Form: GULL WING; Maximum Voltage Tolerance: 2 %; Package Style (Meter): SMALL OUTLINE, LOW PROFILE, SHRINK PITCH;
XC6216C202PR-G
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 6; Package Code: DFP; Terminal Form: FLAT; Terminal Pitch: 1.5 mm; JESD-30 Code: R-PDFP-F6;
XC6201P332PR-G
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: FLAT; Maximum Input Voltage Absolute: 12 V; Maximum Voltage Tolerance: 2 %; Peak Reflow Temperature (C): 260;
XC6216C202MR-G
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 5; Package Code: TSOP; Terminal Form: GULL WING; Surface Mount: YES; Package Body Material: PLASTIC/EPOXY;
XC6201P301MR-G
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; Peak Reflow Temperature (C): 260; Moisture Sensitivity Level (MSL): 1; Terminal Finish: Tin (Sn); Maximum Time At Peak Reflow Temperature (s): 10; JESD-609 Code: e3;
XC6216B6228R-G
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 6; Package Code: HVSON; Terminal Form: NO LEAD; Maximum Input Voltage Absolute: 30 V; Maximum Voltage Tolerance: 2 %;
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 6; Package Code: DFP; Terminal Form: FLAT; Packing Method: TR; Package Equivalence Code: FL6,.1,60;
XC6216D332FR-G
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: SSO; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 30 V; Maximum Voltage Tolerance: 2 %;
XC6216D502JR
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 2; Package Code: TO-252; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 30 V; Maximum Voltage Tolerance: 2 %;
XC6216D302PR-G
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: LSOF; Terminal Form: FLAT; Maximum Input Voltage Absolute: 30 V; Maximum Voltage Tolerance: 2 %;
XC6201P332MR-G
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 5; Package Code: LSSOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 12 V; Maximum Voltage Tolerance: 2 %;
XC6201P331MR-G
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 5; Package Code: TSOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 12 V; Maximum Voltage Tolerance: 1 %;
XC6216B331MR-G
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 5; Package Code: LSSOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 30 V; Maximum Voltage Tolerance: 1 %;
XC6216D331PR
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 5; Package Code: LSOF; Terminal Form: FLAT; Maximum Input Voltage Absolute: 30 V; Maximum Voltage Tolerance: 1 %;
XC6216D332FR
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: SOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 30 V; Maximum Voltage Tolerance: 2 %;
XC6216D332JR-G
XC6216D332JR
XC6216D332PR
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 5; Package Code: LSOF; Terminal Form: FLAT; Maximum Input Voltage Absolute: 30 V; Maximum Voltage Tolerance: 2 %;
XC6216D332MR-G
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: LSSOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 30 V; Maximum Voltage Tolerance: 2 %;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved