Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
HDSP5601 by Three-five Systems is a 7 SEG NUMERIC LED DISPLAY with peak wavelength of 566nm. It has a display height of 14mm and operates b/w -40°C to 100°C. Commonly used in applications requiring green color at a max forward voltage of 2.5V.
Median Price
$2.830
Lifecycle Status
Suppliers In-Stock
36
In-Stock Inventory
1k+
Adafruit Industries
1+ parts
$0.486
100+ parts
$0.442
1k+ parts
$0.399
10k+ parts
-
Farnell
$1.580
$1.410
Mouser Electronics
$3.940
$2.260
$1.850
DigiKey
$2.496
$1.932
$1.777
Element14
$5.700
$3.230
$2.760
Avnet
$1.822
$1.717
EBV Elektronik
Verical
$2.115
$2.051
Freelance Electronics
$0.344
Digiode
$0.462
Nova Conductors
$1.765
TME
R&J Components
Vyrian
Freddi Giovanni
ComSIT Distribution GmbH
Huijzer Components
Lakeland Logistics Inc
Ack Elektronik San.Tic.Ltd.Sti
LIBRA Elektronik GmbH
Component Sense
M&R Communications
Electro Mavin
Electronics Depot
Corel Iberica Componentes, S.L.
PC Components Company LLC
ACDS - Activité Composants Distribution Service
Semtec, LLC
ABC Electronics Ltd.
Holdelec - ElecDif-Pro
Bristol Electronics
LWI Electronics Inc
Inland Empire Components Inc.
Atlantic Semiconductor
Prism Electronics
Elcom Components
Aztec Data Supply Inc.
$0.129
Decca Corp
$0.413
$0.405
$0.401
Corphita
$0.437
Corohmni
$0.509
Argo Parts USA
Continental Prestige Electronics
$1.729
Netroflash
$1.676
$1.641
Neutron USA
$200.160
Assy Fe
Kepictronics
Metaverse IC Inc.
Authorized Procurement Solutions
Perfect Parts
Infinite Electronics LLP (Excess)
Eastek
Supply Digital
Cyclops Electronics Ltd (Excess)
ChipTracer
Glotronic Ltd.
A-Plus Industry Inc.
Common anode configuration allows for easy circuit design and integration, making the product user-friendly.
The peak wavelength of 566nm ensures a vibrant green color display, making it visually appealing.
The 7 segment numeric display allows for easy and clear numerical representation, making it suitable for various applications.
With a high maximum operating temperature of 100°C, the display is suitable for use in demanding environments without risk of overheating.
The low minimum operating temperature of -40°C ensures the display can function even in extreme cold conditions.
The tin/lead terminal finish provides good solderability and conductivity, ensuring reliable connections in the circuit.
Green color at the specified wavelength provides good visibility and contrast, making the display suitable for various applications.
The 14mm display height offers clear visibility of the numerals, making it suitable for applications where readability is important.
The low maximum forward voltage of 2.5V ensures energy efficiency and allows for operation with lower power consumption.
LED Displays HDSP5601 attributes and parameters. Explore more LED Displays devices from Three-five Systems
Color At Wavelength:
Configuration:
Display Height:
Maximum Forward Voltage:
JESD-609 Code:
No. of Characters:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Peak Wavelength (nm):
Sub-Category:
Terminal Finish:
HDSP5601 Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.20.00
SB
NSN
5895-99-789-7600, 5895997897600, 5980-01-264-9879, 5980012649879
NIIN
997897600, 012649879
LM317T
Inchange Semiconductor
Other Regulators; No. of Terminals: 3; Surface Mount: NO; Technology: BIPOLAR; Minimum Output Voltage-1: 1.2 V; No. of Outputs: 1;
LL4148
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BSS84-7-F
Diodes Incorporated
Diodes Inc. BSS84-7-F is a P-channel FET with 50V DS breakdown voltage, 0.13A max drain current, and 10 ohm RDS(on). Ideal for switching applications, it features a single configuration with built-in diode in a small outline package. Operating in enhancement mode at up to 150°C, it has Gull Wing terminals and matte tin finish.
BAV99
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Plessey Semiconductors Discrete Components Div
ULN-2803A
Vishay Sprague
Vishay Sprague's ULN-2803A is an 8-bit peripheral driver with a max supply voltage of 3V. Featuring open-collector output characteristics, it offers built-in transient protections and operates b/w -20°C to 85°C. Ideal for applications requiring sink current flow direction, this rectangular-shaped driver has a terminal pitch of 2.54mm and turn-on/off time of 1us.
SMBJ18CA
Meritek Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 7.5 ohm; Maximum Drain Current (Abs) (ID): .115 A;
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
STM32H753IIK6
STMicroelectronics
STM32H753IIK6 by STMicroelectronics is a 32-bit microcontroller with 176 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs, 2-Ch 12-Bit DACs, and peripherals like CAN, ETHERNET, and USB. Ideal for industrial applications requiring high-speed processing and extensive connectivity options.
1N4148
Forward International Electronics
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Maximum Operating Temperature: 200 Cel; No. of Phases: 1;
ULN2803A
YOUTAI SEMICONDUCTOR CO LTD
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 18; Package Code: SOP; Package Shape: RECTANGULAR; JESD-30 Code: R-PDSO-G18;
Shanghai Lunsure Electronic Technology
RECTIFIER DIODE; Surface Mount: NO; Maximum Forward Voltage (VF): 1 V; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Config: SINGLE;
Tt Electronics Plc
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Qualification Status: Not Qualified; JESD-30 Code: R-PSFM-T3;
2N2222A
Space Power Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Minilogic Device
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .625 W; Maximum Collector Current (IC): .001 A;
Onsemi
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; No. of Terminals: 3;
DS18B20+
Analog Devices
DS18B20+ by Analog Devices is a 12-bit temperature sensor with 3.3/5V supply, -55 to 125°C range, and ±0.50°C accuracy. It features a 1-Wire interface for digital output and is commonly used in applications requiring precise temperature monitoring in various industries.
OPA2277UA
Texas Instruments
OPA2277UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 100 uV and micropower consumption of 1.65 mA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1000 kHz in a small outline package.
HDSP-5503
Agilent Technologies
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Display Height: 14.2 mm; Minimum Operating Temperature: -40 Cel; No. of Functions: 1; Maximum Operating Temperature: 100 Cel;
LTP-1557AG
Lite-on Technology
LTP-1557AG by Lite-on Technology is a 5x7 dot matrix LED display with common anode configuration. It has a peak wavelength of 565nm and max forward current of 0.013A. Ideal for applications requiring green color displays, with operating temperatures ranging from -35°C to 85°C.
TIL321
TIL321 by Texas Instruments is a 7 SEG NUMERIC LED DISPLAY with peak wavelength of 655nm. It has a display height of 13mm and max forward voltage of 2V. Ideal for applications requiring red color output, operating b/w -25°C to 85°C temperature range.
HDSP-3903
Broadcom
HDSP-3903 by Broadcom is a high efficiency red LED display with a common cathode configuration. It has a max forward current of 0.04 A and a peak wavelength of 635 nm. This display is commonly used in applications that require smart or normal 7 segment numeric displays.
SA52-11EWA
Kingbright
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; No. of Functions: 1; Configuration: COMMON ANODE, 1 DIGIT WITH DECIMAL POINT; Minimum Operating Temperature: -40 Cel; Color: HIGH EFFICIENCY RED; Additional Features: IC COMPATIBLE;
SA36-11SURKWA
Kingbright Electronic
SA36-11SURKWA by Kingbright Electronic is a COMMON ANODE 7 SEG NUMERIC LED DISPLAY with 0.03A forward current. Featuring HYPER RED color, it operates b/w -40 to 85 °C and has a display height of 9.14mm. Ideal for applications requiring smart/normal numeric displays with decimal points.
5082-7650
Quality Technologies
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Minimum Operating Temperature: -40 Cel; Configuration: COMMON ANODE, 1 DIGIT WITH DECIMAL POINT; Color: HIGH EFFICIENCY RED; Additional Features: IC COMPATIBLE; No. of Functions: 1;
ACDA03-41SGWA-F01
Kingbright Electronic's ACDA03-41SGWA-F01 LED display features 2 digits with decimal point, max forward current of 0.025A, and smart/normal 7 seg numeric type. Ideal for applications requiring a super bright green display, operating b/w -40°C to 85°C.
HDSP-U513
Broadcom's HDSP-U513 LED display features common cathode configuration, 8mm display height, and peak wavelength of 566nm. Ideal for applications requiring a smart/normal 7-segment numeric display with high performance green color output.
HCMS-2961
SMART/NORMAL 5 X 7 DOT MATRIX LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 85 Cel; Color: YELLOW; JESD-609 Code: e0; Color At Wavelength: Yellow;
HCMS-2912
Broadcom's HCMS-2912 is a 5x7 dot matrix LED display with 8 functions, emitting high-efficiency red light at peak wavelength of 635nm. With a max forward voltage of 5.5V and operating temperatures ranging from -40°C to 85°C, it's ideal for applications requiring compact displays in harsh environments.
LTP1557AG
Taiwan Liton Electronic C
LTP1557AG by Taiwan Liton Electronic C is a 5x7 dot matrix LED display with common anode configuration. It operates at temperatures from -35°C to 85°C, emitting green light at peak wavelength of 565nm. With a max forward current of 0.013A and voltage of 2.8V, it's ideal for applications requiring high visibility displays in various electronic devices.
HTIL-311A
SMART/NORMAL 4 X 7 DOT MATRIX LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Color At Wavelength: Red; No. of Functions: 1; Peak Wavelength (nm): 655; Configuration: COMPLEX;
KCSC02-123
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel; Maximum Forward Current: .03 A; Additional Features: IC COMPATIBLE; Display Height: 5.08 mm;
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Display Height: 9.14 mm; Maximum Operating Temperature: 85 Cel; Configuration: COMMON ANODE, 1 DIGIT WITH DECIMAL POINT; Maximum Forward Current: .03 A; Color: HYPER RED;
HDSP-2133-JKD00
Broadcom's HDSP-2133-JKD00 is a 5x7 dot matrix LED display with peak wavelength of 568nm. With 8 functions and high performance green color, it offers max luminous intensity of 13.98mcd. Ideal for applications requiring compact displays with bright green output in temperature range -55 to 85°C.
Fairchild Semiconductor
Fairchild Semiconductor's 5082-7650 LED display features common anode configuration, 0.03A forward current, and 635nm peak wavelength. Ideal for smart/normal numeric displays with high efficiency red color, operating from -40 to 85°C. Display height of 10.92mm and max forward voltage of 2.5V make it suitable for various applications requiring precise numerical output.
TDSG5150
Telefunken Microelectronics
7 SEG NUMERIC LED DISPLAY; Configuration: Common Anode; No. of Characters: 1; Maximum Forward Voltage: 3 V; Minimum Operating Temperature: -40 Cel; Maximum Operating Temperature: 85 Cel;
SL1405
SL1405 by Onsemi is a 7 SEG NUMERIC LED DISPLAY with COMMON ANODE configuration. It features 3.5 digits, 0.015A max forward current, and peak wavelength of 700nm. Ideal for applications requiring a red display with 6mm height, operating b/w -25 °C to 65°C temperature range.
HDSP-315G
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Terminal Finish: Tin/Silver/Copper (Sn/Ag/Cu); Maximum Operating Temperature: 100 Cel; Color: GREEN; No. of Characters: 1; No. of Functions: 1;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
HDSP-2533
Hewlett Packard
SMART/NORMAL 5 X 7 DOT MATRIX LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); No. of Functions: 8; Display Height: 5 mm; Configuration: COMPLEX; Color At Wavelength: Green;
SMART/NORMAL 5 X 7 DOT MATRIX LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel; Peak Wavelength (nm): 568; Display Height: 5 mm;
HDSP-2533 by Broadcom is a 5x7 dot matrix LED display with peak wavelength of 568nm. It has 8 functions, operates b/w -40°C to 85°C, and features green color at a height of 4.57mm. Ideal for applications requiring complex configurations and high visibility in various environments.
HDSP-2112
HDSP-2112 by Broadcom is a 5x7 dot matrix LED display with peak wavelength of 635nm. It operates b/w -45°C to 85°C, featuring high efficiency red color at 5mm height. Ideal for applications requiring complex configurations and up to 8 characters display.
SMART/NORMAL 5 X 7 DOT MATRIX LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Color At Wavelength: Red; Display Height: 5.08 mm; No. of Functions: 8; Peak Wavelength (nm): 635;
SMART/NORMAL 5 X 7 DOT MATRIX LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); No. of Characters: 8; Additional Features: CMOS COMPATIBLE; Configuration: COMPLEX; Color: HIGH EFFICIENCY RED;
HDSP-433G
7 SEG NUMERIC LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 105 Cel; Maximum Forward Voltage: 2.5 V; Minimum Operating Temperature: -40 Cel; No. of Characters: 5;
7 SEG NUMERIC LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); JESD-609 Code: e0; Maximum Operating Temperature: 105 Cel; No. of Characters: 5; Color At Wavelength: Green;
HDSP-U201
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Forward Current: .03 A; Color At Wavelength: Red; Color: HIGH EFFICIENCY RED; Configuration: COMMON ANODE, 1 DIGIT WITH DECIMAL POINT;
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Terminal Finish: TIN SILVER COPPER; Maximum Forward Current: .03 A; Minimum Operating Temperature: -25 Cel; No. of Characters: 1; Display Height: 8 mm;
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); No. of Characters: 1; No. of Functions: 1; Minimum Operating Temperature: -25 Cel; Maximum Operating Temperature: 90 Cel;
HDSP-2113
Broadcom's HDSP-2113 is a 5x7 dot matrix LED display with peak wavelength of 568nm. It operates b/w -45°C to 85°C, featuring green color at 5mm height. Ideal for applications requiring complex configurations and up to 8 characters display.
SMART/NORMAL 5 X 7 DOT MATRIX LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Minimum Operating Temperature: -45 Cel; Color: HIGH PERFORMANCE GREEN; Additional Features: CMOS COMPATIBLE; Peak Wavelength (nm): 568;
SMART/NORMAL 5 X 7 DOT MATRIX LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); No. of Characters: 8; Minimum Operating Temperature: -45 Cel; Maximum Operating Temperature: 85 Cel; JESD-609 Code: e0;
HDSP-2534
HDSP-2534 by Broadcom is a 5x7 dot matrix LED display with peak wavelength of 645nm. It has 8 functions, operates b/w -40°C to 85°C, and features red color at a height of 4.57mm. Ideal for applications requiring complex configurations and high visibility in various environments.
SMART/NORMAL 5 X 7 DOT MATRIX LED DISPLAY; Terminal Finish: Tin/Copper (Sn/Cu); Color At Wavelength: Red; Maximum Operating Temperature: 85 Cel; Color: RED; Display Height: 5 mm;
SMART/NORMAL 5 X 7 DOT MATRIX LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Color: RED; JESD-609 Code: e0; Maximum Operating Temperature: 85 Cel; Peak Wavelength (nm): 645;
HDSP-U101
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Color: RED; Display Height: 8 mm; Configuration: COMMON ANODE, 1 DIGIT WITH DECIMAL POINT; No. of Functions: 1;
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Configuration: COMMON ANODE, 1 DIGIT WITH DECIMAL POINT; Color At Wavelength: Red; Maximum Operating Temperature: 90 Cel; Maximum Forward Current: .015 A;
HDSP-U101 by Broadcom is a COMMON ANODE 7 SEG NUMERIC LED DISPLAY with peak wavelength of 645nm. It operates at temperatures from -20 to 90 °C and has a max forward current of 0.015A. Ideal for applications requiring a RED display with 8mm height, such as digital clocks or electronic meters.
Three-five Systems
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved