Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): LEVER; Contact Function: ON-(ON); Sealing: IP67;
Median Price
$2.111
Lifecycle Status
Suppliers In-Stock
5
In-Stock Inventory
1k+
Farnell
1+ parts
$4.820
100+ parts
$2.110
1k+ parts
-
10k+ parts
Element14
$202.650
$159.200
Verical
$1.788
Chip1Stop
$1.360
Arrow
$0.740
$0.739
Continental Prestige Electronics
$3.650
$1.600
Assy Fe
Snap Action & Limit Switches DC2CA1LC attributes and parameters. Explore more Snap Action & Limit Switches devices from The Cherry
Angle (Actuator):
Length (Actuator):
Material (Actuator):
Actuator Travel (mm):
Type (Actuator):
Additional Features:
Body Width:
Body Height:
Body Length/Diameter:
Center Contact Material:
Center Contact Plating:
AC Maximum Power Rating R Load (Contact):
AC Maximum Rating M Load (Contact):
AC Maximum Rating R Load (Contact):
Maximum AC Contact Current:
Contact Function:
Contact Timing:
Maximum AC Contact Voltage:
Electrical Life:
End Contact Material:
End Contact Plating:
Housing Material:
Insulator Material:
JESD-609 Code:
Manufacturer Series:
Mounting Feature:
Maximum Operating Force:
Operating Position:
Maximum Operating Temperature:
Minimum Operating Temperature:
Maximum Pre Travel:
Sealing:
Switch Action:
Switch Function:
Switch Type:
Terminal Finish:
Terminal Length:
Terminal Material:
Termination Type:
DC2CA1LC Switches trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.50.70.00
SB
The CHERRY Corporation was founded by Walter Lorain Cherry in 1953. The first microswitches were produced in the basement of a restaurant in Highland Park, Illinois. From humble beginnings, the company quickly grew in size and reputation after entering the US automobile market. In the early 1960’s, Walter L. Cherry ventured across the pond to Europe. American Entrepreneurship coupled with German Engineering encompasses the history and future of CHERRY. Today, CHERRY is regarded as the epitome of precision, longevity, and responsibility. A unique feeling.
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
BSS138
Weitron Technology
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Terminal Form: GULL WING; Terminal Position: DUAL;
2N2222A
Tesla Elektronicke Soucastky
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148WS
General Instrument
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Protek Devices
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ABS25-32.768KHZ-T
Abracon
Abracon's ABS25-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency, such as IoT devices and precision timing systems in industrial settings.
MMBT3904LT1G
Onsemi
MMBT3904LT1G by Onsemi is a NPN BJT with max. collector-emitter voltage of 40V, hFE of 30, and fT of 300MHz. Ideal for small signal applications in electronics due to its compact size, high transition frequency, and low power dissipation capabilities.
LL4148
Microsemi
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
International Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.1 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
SS14
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ABS25-32.768KHZ-1-T
Abracon's ABS25-32.768KHZ-1-T crystal oscillator offers 10 ppm frequency tolerance, 126% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal operating frequency, such as IoT devices and precision timing systems.
LP2950CDT-3.3G
LP2950CDT-3.3G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.1A. It has a small outline package style, operates at temperatures ranging from -40 to 125 °C, and is suitable for applications requiring low dropout voltage and precise voltage regulation in electronic circuits.
Jiangsu Jiejie Microelectronics
BAV99
Panjit International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
International Components
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Terminal Finish: Tin/Lead (Sn/Pb); JESD-609 Code: e0; Maximum Reverse Recovery Time: .004 us;
LL4148-GS08
Vishay Telefunken
M24308/2-1F
Air Electro
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; MIL Conformity: YES; Additional Features: STANDARD: MIL-DTL-24308;
Rectron
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
TCA6424ARGJR
Texas Instruments
TCA6424ARGJR by Texas Instruments is a CMOS parallel I/O port with 24 bits and 3 ports. It operates b/w -40 to 85°C, suitable for industrial applications. With a max clock frequency of 0.4 MHz, it offers low power consumption at only 0.03 mA supply current.
IRLML6401TRPBF
International Rectifier
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.3 W; Minimum Operating Temperature: -55 Cel; Avalanche Energy Rating (EAS): 33 mJ;
BZ-2RW82224-A2
Honeywell Sensing And Control
Honeywell Sensing And Control's BZ-2RW82224-A2 is a SPDT snap action/limit switch with 15A@480VAC AC rating. Featuring wide sintered stainless steel roller actuator, it has 1.67N max operating force and 2.39mm actuator travel. Ideal for panel mount applications requiring momentary switch action.
BZ-2RW8225551-A2
BZ-2RW8225551-A2 by Honeywell is a SPDT snap action/limit switch with 15A@480VAC AC rating and 0.5A@125VDC DC rating. Featuring PLUNGER actuator type, it has 2.38mm pre-travel and 1.67N max operating force. Ideal for panel mount-threaded applications requiring precise momentary switch action.
914CE18-3A
The Honeywell Sensing And Control 914CE18-3A is a SPDT snap action/limit switch with a steel plunger actuator. It has a max AC contact current of 5A@250VAC and an actuator travel of 4.8mm, suitable for panel mount applications requiring momentary switch action.
AV440461
Panasonic
AV440461 by Panasonic is a SPDT snap action/limit switch with 200000 cycles electrical life. Featuring a PIN PLUNGER actuator, it has 0.4mm actuator travel and 0.98N max operating force. Ideal for applications requiring momentary switch action, with SOLDER termination type and -25 to 80°C operating temperature range.
LCGHF5A10RC
C & K Components
LCGHF5A10RC by C & K Components is a SPDT snap acting/limit switch with 6000 cycles electrical life. Featuring lever roller high force actuator, it has 4.3mm actuator travel and 0.56N max operating force. Ideal for applications requiring momentary switch action in temperatures ranging from -25°C to 85°C.
D2F-01L2-D3
Omron
Omron's D2F-01L2-D3 is a SPDT snap action/limit switch with 30000 cycles electrical life. Featuring HINGE ROLLER LEVER actuator, it has IP40 sealing and operates b/w -25 to 65 °C. Ideal for panel mounting applications requiring momentary switch action.
D2SW-3L2MS
Omron's D2SW-3L2MS snap action switch has an electrical life of 200K cycles, SPDT switch function, and IP67 sealing. With a max operating temperature of 85°C, it is ideal for panel mounting applications requiring a momentary switch with a hinge roller lever actuator.
D459-R1LL-G2
The Cherry
The Cherry D459-R1LL-G2 is a SPDT snap action/limit switch with 50000 cycles electrical life. Featuring brass terminals, it has a body width of 10.3124 inch and max AC contact current of 16A@250VAC. Ideal for applications requiring precise actuation within -40°C temperature range.
SS-5GL2
Omron SS-5GL2 is a SPDT snap acting/limit switch with 200000 cycles electrical life. It has a max AC contact current of 5A@125VAC and operates b/w -25 to 85 °C. With HINGE ROLLER LEVER actuator, it is ideal for panel mounting applications requiring momentary switch action.
Z-15ESR
Omron Z-15ESR is a SPDT snap action/limit switch with 100000 cycles electrical life. It has a slim spring plunger actuator, IP00 sealing, and can handle 15A@250VAC AC max rating. Ideal for panel mounting applications in environments ranging from -25°C to 80°C.
1AC2
1AC2 by Honeywell is a SPDT snap action/limit switch with 15A@480VAC AC rating and 0.5A@125VDC DC rating. Featuring a 7.92mm actuator travel, it is ideal for panel mount applications requiring momentary switch action. With a compact body size of 57.15x19.46x41.81 mm, it offers reliable performance in various industrial settings.
16CX2C
16CX2C by Honeywell is an explosion-proof SPDT snap action/limit switch with a side rotary actuator. It operates b/w -40°C to 85°C, suitable for panel mounting applications. With a max AC contact voltage of 120V, it offers momentary switch action and wire termination.
SS-01D1
Omron SS-01D1 is a SPDT snap action/limit switch with 200000 cycles electrical life. Featuring IP40 sealing, it has a max operating force of 1.47N and operates at temperatures from -25 to 85°C. Ideal for applications requiring momentary switch action, such as in industrial automation systems.
111SM115-H2
111SM115-H2 by Honeywell is a SPDT snap action/limit switch with a body width of 6.35in and max operating temperature of 121°C. It has a max AC contact current of 5A, making it suitable for applications requiring momentary switch action in various industries.
D413-R1LA-G2
Zf Friedrichshafen Ag
SNAP ACTING/LIMIT SWITCH; Switch Function: SPDT; DC Maximum Rating R Load (Contact): 0.5A@30VDC; Maximum AC Contact Current: .1 A; Length (Actuator): .122 inch; Electrical Life: 50000 Cycle(s);
LSA1A1
LSA1A1 by Honeywell is a SPDT snap action/limit switch with -12 to 121°C operating range. Featuring side rotary actuator, it has 250V DC and 600V AC contact voltage limits. Ideal for panel mounting applications requiring momentary switch action with wire termination.
311SM6
311SM6 by Honeywell is a SPDT snap action/limit switch with a body width of 6.35in and max operating temperature of 121°C. It has a max AC contact current of 5A and is suitable for panel mounting applications requiring momentary switch action.
ESE58L11A
The Panasonic ESE58L11A is a SPST snap action/limit switch with 50000 cycles electrical life. It has a body width of 3" and max operating force of 0.3N, suitable for surface mount-right angle applications. With a max DC contact voltage of 5V and actuator travel of 2.1mm, it operates b/w -10°C to 60°C temperatures efficiently.
GLCB01A1B
GLCB01A1B by Honeywell Sensing And Control is a SPDT snap action/limit switch with IP67 sealing. It has a max operating temperature of 85°C and can handle up to 10A@300VAC AC current. This side rotary type switch is suitable for applications requiring momentary switch action in harsh environments.
914CE3-12
The Honeywell Sensing And Control 914CE3-12 is a SPDT snap action/limit switch with 5A@250VAC rating. Featuring a steel roller actuator, it has a body width of 16in and max operating force of 12.01N. Ideal for panel mounting applications requiring momentary switch action.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved