Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TPS7A9101DSKR by Texas Instruments is an adjustable positive single output LDO regulator with a max output current of 1A and a max input voltage of 6.5V. Operating temperature ranges from -40 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact spaces. The package style is small outline with very thin profile, ideal for space-constrained designs.
Median Price
$2.186
Lifecycle Status
Suppliers In-Stock
18
In-Stock Inventory
1k+
Texas Instruments
1+ parts
$1.530
100+ parts
$1.264
1k+ parts
$0.683
10k+ parts
-
Chip1Stop
$2.120
$1.250
$1.010
$0.954
Arrow
$1.454
$1.374
DigiKey
$2.380
$1.443
$1.323
Mouser Electronics
$2.400
$1.440
$1.270
$1.200
Verical
Maritex
$0.895
$0.572
$0.446
Nova Conductors
$1.116
Digiode
Chip Stock
Sensible Micro Corp
Cyclops Electronics Ltd
Vyrian
Component Sense
LIBRA Elektronik GmbH
Semtec, LLC
ComSIT Distribution GmbH
SPM Sales
Semicontronic
$0.740
$0.722
$0.718
Ampacity Inc.
Continental Prestige Electronics
$1.094
Argo Parts USA
Netroflash
Corohmni
$1.120
Advanced Electronics
$1.154
$1.096
Corphita
$1.377
Parana Technologies
$2.814
$3.300
DigiPath Technology Company
$3.099
$2.851
IDEA Electronic Components Group
$3.162
$2.846
ChromeModa Solutions
$2.593
GreenTree Electronics
Lixinc
Futuretech Components
A-Z Elektronik GmbH
Technoshack Inc. (Excess)
S.R.D Solutions
Emar International I/E
Authorized Procurement Solutions
This material provides durability and reliability to the product, making it suitable for various applications.
Low dropout voltage ensures efficient power conversion, making the regulator ideal for applications where power efficiency is crucial.
Surface mount capability allows for easy and convenient installation on PCBs, saving space and reducing assembly time.
Wide operating temperature range ensures the regulator can function effectively in various environmental conditions.
The minimum output voltage of 1.8V makes this regulator suitable for applications requiring lower voltage levels.
Being an adjustable positive LDO regulator allows for flexibility in output voltage adjustment, catering to different application requirements.
With a high output current capability of 1A, this regulator can power a wide range of electronic devices and components.
The high maximum input voltage tolerance allows the regulator to handle input voltage variations without compromising performance.
Adjustable Regulators - Positive Single Output LDO TPS7A9101DSKR attributes and parameters. Explore more Adjustable Regulators - Positive Single Output LDO devices from Texas Instruments
Adjustability:
Maximum Dropout Voltage-1:
Nominal Dropout Voltage-1:
Maximum Input Voltage:
Minimum Input Voltage:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Outputs:
No. of Terminals:
Operating Temperature (TJ-Max):
Operating Temperature (TJ-Min):
Maximum Output Current-1:
Maximum Output Voltage-1:
Minimum Output Voltage-1:
Package Body Material:
Package Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Regulator Type:
Maximum Seated Height:
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Maximum Voltage Tolerance:
Width:
TPS7A9101DSKR Regulators trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Assembly/Origin - TPSYYY 18/May/2018
Texas Instruments Inc. (TI) is one of the world's leading semiconductor companies and a global leader in analog and digital signal processing technology. The company has had a major impact on the electronics industry for over 80 years, manufacturing integrated circuits (ICs), software and subsystems that leverage high-performance computing capabilities. It offers an extensive portfolio of solutions for a wide range of industries, from aerospace to medical devices and consumer products to communication systems. Over its long history, TI has become synonymous with quality, reliability and innovation. Today, TI is one of the largest semiconductor companies in the world with operations in more than 30 countries across six continents.
President, CEO
Haviv Ilan
Chairman
Richard K. Templeton
Senior VP, CFO
Rafael R. Lizardi
M - Fab
Fabrication
Fab Initiation
1997
USA
South Portland
Wafer Capacity
32,000
D - FAB
1966
Dallas
42,000
D MOS - 6
2002
25,000
D MOS - 5
1995
75,000
Miho - 8
1980
Japan
Inashiki
43,000
S FAB 1
Sherman
91,000
F - FAB
2001
Germany
Freising
37,000
R Fab 1
2010
Richardson
40,000
D HC Line
1999
2,000
JV3
Aizu Wakamatsu
45,000
C - FAB
2007
China
Chengdu
30,000
L - Fab
2015
Lehi
70,000
R - Fab 2
2022
S - FAB 2
2025
S - FAB 3
2028
LM107H/883
LM107H/883 by Texas Instruments is a MIL-STD-883 compliant operational amplifier with 3000uV max input offset voltage, 80dB common mode reject ratio, and 250kHz unity gain bandwidth. Ideal for military applications due to its -55 to 125 °C operating temperature range and robust metal package body material.
1N4148WS-7-F
Diodes Incorporated
1N4148WS-7-F by Diodes Inc. is a single rectifier diode with max reverse recovery time of 0.004 us and max reverse current of 1 uA. It operates b/w -65 to 150 °C, ideal for applications requiring small outline surface mount diodes with a max output current of 0.15 A.
LM317LMX/NOPB
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Seated Height: 1.75 mm; Nominal Dropout Voltage-1: 3 V;
BSS84PH6327XTSA2
Infineon Technologies
BSS84PH6327XTSA2 by Infineon is a P-CHANNEL FET with 60V DS breakdown voltage, ideal for switching applications. It features a single configuration with built-in diode and operates in enhancement mode. With a max drain current of 0.17A and on-resistance of 8 ohm, it offers reliable performance in small outline packages.
SN65HVD234DR
SN65HVD234DR by Texas Instruments is an 8-terminal interface circuit with a data rate of 1 Mbps. Operating temperature ranges from -40 to 125 °C, making it ideal for automotive applications. With a supply voltage of 3.3 V and low current draw of 6 mA, it's suitable for network interfaces in compact designs.
SS14
Vishay Intertechnology
Vishay Intertechnology's SS14 is a Schottky rectifier diode with a max forward voltage of 0.5V and output current of 1A. Operating at up to 125°C, it has a repetitive peak reverse voltage of 40V. Ideal for surface mount applications, it suits various electronic circuits requiring efficient rectification and low forward voltage drop.
1N4148
Crimson Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N7002
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Time At Peak Reflow Temperature (s): 40; Minimum DS Breakdown Voltage: 60 V;
LL4148
Rugao Dachang Electronic
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
MBR0520L-T1
Won-top Electronics
MBR0520L-T1 by Won-top Electronics is a Schottky rectifier diode with 20V peak reverse voltage and 0.5A output current. It is a single-config, surface-mount diode in a small outline package, suitable for applications requiring high-speed switching and low forward voltage drop. Operating temperature range from -65°C to 125°C makes it ideal for various electronic circuits.
SMBJ18CA
Yangzhou Yangjie Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.05 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
Silicon Standard
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): .225 W; Maximum Drain-Source On Resistance: 7.5 ohm; Transistor Element Material: SILICON;
General Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FDN306P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Maximum Drain Current (Abs) (ID): 2.6 A; Operating Mode: ENHANCEMENT MODE;
Pro-an Electronic
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Polarity: BIDIRECTIONAL; Nominal Breakdown Voltage: 21.05 V; Maximum Repetitive Peak Reverse Voltage: 18 V;
MMBT2907ALT1G
Rochester Electronics
PNP; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 200 MHz; Maximum Collector Current (IC): .6 A; Terminal Form: GULL WING;
LM317T
Bay Linear
Other Regulators; No. of Terminals: 3; No. of Outputs: 1; Surface Mount: NO; Maximum Load Regulation (%): 1.5 %; Operating Temperature (TJ-Min): 0 Cel;
M39029/56-351
TE Connectivity
TE Connectivity's M39029/56-351 is a CRIMP contact type backshell accessory with rated voltage of 115V. It operates b/w -65 to 175 °C, suitable for MIL-C-39029/56 connectors with wire gauge ranging from 28 to 22 AWG. Ideal for military applications requiring female contacts and copper alloy material.
LM107H
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Code: TO-99; Package Shape: ROUND;
Lite-on Semiconductor
MAX8556ETE+
Analog Devices
Analog Devices' MAX8556ETE+ is an adjustable positive single output LDO regulator with a max output current of 4A. Operating temperature ranges from -40 to 150°C, making it suitable for various applications in electronics requiring precise voltage regulation. The device features a BICMOS technology and comes in a square chip carrier package style.
LT3045EMSE#PBF
LT3045EMSE#PBF by Analog Devices is an adjustable positive single output LDO regulator with a max output current of 0.5A and a max dropout voltage of 0.45V. It is designed for applications requiring precise voltage regulation in a compact package, suitable for surface mount assembly and operating temperatures ranging from -40 to 125°C.
MAX8902BATA+T
Analog Devices' MAX8902BATA+T is an adjustable positive single output LDO regulator with a max output current of 0.5A and a min operating temperature of -40°C. Its package style is small outline, heat sink/slug, very thin profile making it suitable for compact electronic devices requiring precise voltage regulation. The device operates on BICMOS technology and has a terminal pitch of 0.5mm, ideal for surface mount applications in various consumer electronics.
LM1117IMP-ADJ/NOPB
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 4; Package Code: SOP; Terminal Form: GULL WING; Maximum Time At Peak Reflow Temperature (s): 40; Qualification Status: Not Qualified;
LT3088EDD#PBF
Linear Technology
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 8; Package Code: HVSON; Terminal Form: NO LEAD; Terminal Pitch: .5 mm; No. of Functions: 1;
LT3080EST#PBF
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 3; Package Code: SOP; Terminal Form: GULL WING; Operating Temperature (TJ-Max): 125 Cel; Peak Reflow Temperature (C): 260;
TPS74401RGRT
TPS74401RGRT by Texas Instruments is an adjustable positive single output LDO regulator with a max output current of 3A and a dropout voltage of 0.195V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
LT3080EST#TRPBF
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 3; Package Code: SOP; Terminal Form: GULL WING; Maximum Output Voltage-1: 36 V; Terminal Finish: Matte Tin (Sn);
LT3042EDD#TRPBF
LT3042EDD#TRPBF by Analog Devices is an adjustable positive single output LDO regulator with a max output voltage of 15V and a max output current of 0.2A. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
TPS76901DBVRG4
TPS76901DBVRG4 by Texas Instruments is an adjustable positive single output LDO regulator with a max output voltage of 5.5V and a max output current of 0.1A. Operating temperature ranges from -40°C to 125°C, making it suitable for various applications requiring stable voltage regulation in compact designs.
LT3086IFE#TRPBF
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 16; Package Code: HTSSOP; Terminal Form: GULL WING; Maximum Dropout Voltage-1: .54 V; Nominal Dropout Voltage-1: .33 V;
LT3086IR#PBF
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 7; Package Code: HSOP; Terminal Form: GULL WING; Package Shape: RECTANGULAR; Nominal Dropout Voltage-1: .33 V;
ISL80113IRAJZ-T7A
Renesas Electronics
ISL80113IRAJZ-T7A by Renesas Electronics is an adjustable positive single output LDO regulator with a max output current of 3A. It features a small outline package style, very thin profile, and matte tin terminal finish. Ideal for applications requiring precise voltage regulation in compact spaces.
LT3013HFE#PBF
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 16; Package Code: HTSSOP; Terminal Form: GULL WING; JESD-30 Code: R-PDSO-G16; Adjustability: ADJUSTABLE;
LT3080EDD-1#TRPBF
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 8; Package Code: HVSON; Terminal Form: NO LEAD; Package Shape: SQUARE; Operating Temperature (TJ-Min): -40 Cel;
LT1085CM#TRPBF
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 3; Package Code: TO-263; Terminal Form: GULL WING; Surface Mount: YES; Nominal Dropout Voltage-1: 1.3 V;
LT3013BEFE#PBF
LT3013BEFE#PBF by Analog Devices is an adjustable positive single output LDO regulator with a max output voltage of 60V and a max output current of 0.25A. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces. The package style includes small outline, heat sink/slug, thin profile, and shrink pitch features for versatile mounting options.
TPS78101DDCR
TPS78101DDCR by Texas Instruments is an adjustable positive single output LDO regulator with a max output current of 0.15A and a min input voltage of 2.2V. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces. With a small outline package style and surface mount capability, this regulator is ideal for space-constrained designs where efficient power management is crucial.
LT1761ES5-SD#TRMPBF
LT1761ES5-SD#TRMPBF by Analog Devices is an adjustable positive single output LDO regulator with a max output voltage of 20V and a max dropout voltage of 0.45V. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
LT3086HFE#PBF
LT3086HFE#PBF by Analog Devices is an adjustable positive single output LDO regulator with a max output current of 2.1A and a max dropout voltage of 0.54V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
DS160PT801ACBR
DS160PT801ACBR by Texas Instruments is a bus controller IC with 339 terminals, operating at -40 to 85°C. It supports PCI bus compatibility with a data transfer rate of 2000 MBps. This CMOS technology device has a thin profile and fine pitch package suitable for industrial applications.
DRV8316RRGFR
DRV8316RRGFR by Texas Instruments is a motion control IC with a rectangular package and a terminal form of gull wing. It has a max output current of 8A and can operate at temperatures ranging from -40 to 125°C. This IC is commonly used as a brushless DC motor controller in automotive applications.
LMR43610MSC3RPERQ1
LMR43610MSC3RPERQ1 by Texas Instruments is a 9-terminal switching regulator with a max output voltage of 32V and max output current of 1A. Ideal for automotive applications, it operates b/w -40 to 150°C, featuring a buck switcher config and PWM control mode at up to 2200kHz frequency.
DRV3255EPAPRQ1
DRV3255EPAPRQ1 by Texas Instruments is a Motion Control IC with 64 terminals, operating at -40 to 150°C. It is an AEC-Q100 compliant automotive-grade IC for Brushless DC Motor control, supporting supply voltages from 5V to 90V and output currents up to 3.5A. The package style includes a flatpack with heat sink/slug, suitable for surface mount applications in automotive systems.
TPS7A4301DGQR
TPS7A4301DGQR by Texas Instruments is an adjustable positive single output LDO regulator with a max output voltage of 14.5V and a dropout voltage of 0.6V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
UCC27284DRCR
UCC27284DRCR by Texas Instruments is a MOSFET gate driver with 2 channels, capable of handling a max output current of 3.5A. It operates in automotive-grade temperatures (-40 to 125°C) and has a turn-on/off time of 30µs. This chip carrier package with very thin profile is suitable for high side driver applications requiring fast switching speeds.
CC2662R1FTWRGZRQ1
CC2662R1FTWRGZRQ1 by Texas Instruments is a 32-bit microcontroller with Cortex-M4F CPU, 48 MHz clock frequency, and 81920 bytes of RAM. Ideal for industrial applications, it features 8 ADC channels, 32 DMA channels, and peripherals like AES and PWM for efficient system integration.
TPS7A4901DGNT
TPS7A4901DGNT by Texas Instruments is an adjustable positive single output LDO regulator with a max output voltage of 33V and a max dropout voltage of 0.6V, suitable for applications requiring precise voltage regulation in a compact form factor. Operating temperature ranges from -40°C to 125°C, making it ideal for various electronic devices where stable power supply is crucial. This regulator comes in a small outline package with gull wing terminals, offering flexibility and reliability in diverse circuit designs.
TPS7A4700RGWT
TPS7A4700RGWT by Texas Instruments is an adjustable positive single output LDO regulator with a max output current of 1A and a max input voltage of 36V. Operating temperature ranges from -40 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact spaces. Its package style includes chip carrier and heat sink/slug, ideal for designs where space is limited.
TPS7A4901DGNR
TPS7A4901DGNR by Texas Instruments is an adjustable positive single output LDO regulator with a max output voltage of 33V and a max dropout voltage of 0.6V. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring precise voltage regulation in compact electronic devices.
TPS7A4701RGWT
TPS7A4701RGWT by Texas Instruments is an adjustable positive LDO regulator with a max output current of 1A and a dropout voltage of 0.45V. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring stable voltage regulation in compact electronic devices. The package style includes chip carrier and heat sink/slug, with a terminal pitch of 0.65mm, ideal for surface mount assembly processes.
TPS7A4001DGNT
TPS7A4001DGNT by Texas Instruments is an adjustable positive single output LDO regulator with a max output voltage of 90V and a max dropout voltage of 1.3V, suitable for applications requiring precise voltage regulation in a compact form factor. Operating temperature ranges from -40 to 125°C, making it ideal for various electronic devices where stable power supply is crucial. With surface mount capability and small outline package style, it offers flexibility in design while ensuring efficient performance.
TPS7A4700RGWR
TPS7A4700RGWR by Texas Instruments is a 1A fixed positive LDO regulator with an adjustable output voltage range of 1.4V to 34V and a max dropout voltage of 0.45V. This chip carrier package, suitable for surface mount applications, operates in temperatures ranging from -40°C to 125°C, making it ideal for various electronic devices requiring stable power regulation.
TPS7A4701RGWR
TPS7A4701RGWR by Texas Instruments is an adjustable regulator with a max output current of 1A and a dropout voltage of 0.45V. It is commonly used in applications requiring stable power supply, such as industrial automation and telecommunications equipment.
TPS7A4701QRGWRQ1
TPS7A4701QRGWRQ1 by Texas Instruments is an adjustable positive single output LDO regulator with a max output current of 1A and a max input voltage of 36V. Operating temperature ranges from -40 to 145°C, making it suitable for automotive applications requiring stable voltage regulation in harsh environments. The package style is chip carrier with very thin profile, ideal for space-constrained designs.
TPS73601DBVR
TPS73601DBVR by Texas Instruments is an adjustable positive single output LDO regulator with a max output current of 0.4A and a max dropout voltage of 0.2V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact electronic devices.
TPS73201DBVR
TPS73201DBVR by Texas Instruments is an adjustable positive single output LDO regulator with a max output current of 0.25A and a max dropout voltage of 0.15V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
TPS71501DCKR
TPS71501DCKR by Texas Instruments is an adjustable positive single output LDO regulator with a max dropout voltage of 0.75V and a min input voltage of 2.5V. It is commonly used in applications that require precise voltage regulation, such as portable electronics and automotive systems.
TPS7A1601DGNT
TPS7A1601DGNT by Texas Instruments is an adjustable positive single output LDO regulator with a max output voltage of 18.5V and a max output current of 0.1A. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring precise voltage regulation in compact electronic devices.
TPS74401RGWT
TPS74401RGWT by Texas Instruments is an adjustable positive single output LDO regulator with a max output current of 3A and a max input voltage of 5.5V. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces. The package style includes chip carrier, heat sink/slug, and very thin profile options for versatile integration.
TPS7A4701QRGWTQ1
TPS7A4701QRGWTQ1 by Texas Instruments is an adjustable positive single output LDO regulator with a max output current of 1A and a max input voltage of 36V. It operates in temperatures ranging from -40 to 145°C, making it suitable for automotive applications requiring stable voltage regulation in harsh environments. The package style includes chip carrier and heat sink/slug, with a compact size of 5x5mm ideal for space-constrained designs.
TPS71501DCKRG4
TPS71501DCKRG4 by Texas Instruments is an adjustable positive single output LDO regulator with a max output voltage of 15V and a dropout voltage of 0.75V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
TPS7A1901DRBR
TPS7A1901DRBR by Texas Instruments is an adjustable positive single output LDO regulator with a max output voltage of 18V and a max dropout voltage of 0.45V. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
TPS7A9001DSKR
TPS7A9001DSKR by Texas Instruments is an adjustable positive single output LDO regulator with a max output current of 0.5 A and a max input voltage of 6.5 V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact electronic devices. The package style is small outline with a very thin profile, ideal for space-constrained designs.
TPS7A4001DGNR
TPS7A4001DGNR by Texas Instruments is an adjustable positive single output LDO regulator with a max output voltage of 90V and max dropout voltage of 1.3V. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring precise voltage regulation in compact electronic devices.
TPS73201DBVT
TPS73201DBVT by Texas Instruments is an adjustable positive single output LDO regulator with a max output current of 0.25A and a max dropout voltage of 0.15V. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring stable voltage regulation in compact spaces.
TPS7A9001DSKT
TPS7A9001DSKT by Texas Instruments is an adjustable positive single output LDO regulator with a max output current of 0.5 A and a max dropout voltage of 0.2 V, making it ideal for low-power applications. With a wide operating temperature range from -40 to 125°C, this regulator in a small outline package is suitable for various electronic devices requiring stable voltage regulation.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved