Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TPS51100DGQR by Texas Instruments is a DDR termination regulator with 3A max output current. It operates b/w -40 to 85°C, suitable for various applications requiring a min output voltage of 0.6V in a compact square package.
Median Price
$1.095
Lifecycle Status
Suppliers In-Stock
40
In-Stock Inventory
1k+
Rochester
1+ parts
$0.570
100+ parts
$0.560
1k+ parts
$0.550
10k+ parts
-
Texas Instruments
$0.905
$0.489
Chip1Stop
$1.570
$0.922
$0.828
DigiKey
$1.630
$0.960
$0.861
Mouser Electronics
$0.862
$0.789
Element14
$2.290
$1.360
$1.150
$1.110
Verical
$0.958
$0.838
$0.781
Arrow
$0.612
Farnell
$0.700
$0.618
$0.602
Digiode
$0.542
Ozdisan Elektronik
$0.674
Nova Conductors
$0.778
Maritex
$0.856
$0.446
$0.388
$0.347
Component Electronics Inc.
$3.850
$2.880
$2.500
Vyrian
Cyclops Electronics Ltd
Chip Stock
Bristol Electronics
QIE Inc.
Prism Electronics
Inventory MP
Sensible Micro Corp
Connector Distribution Corp
Right Parts Inc.
R&J Components
Connect4Technologies Inc.
K-1 Technologies
Lantek
Lighthouse Electronics, Inc.
Semi Source
LIBRA Elektronik GmbH
Electronics Depot
North Shore Components
Sea View Technologies
Dan-Mar Components
ComSIT Distribution GmbH
Elcom Components
Semtec, LLC
Contempo Components LLC
Cogito LLC
Ampacity Inc.
$0.484
Corphita
$0.513
Argo Parts USA
Netroflash
$0.762
Continental Prestige Electronics
$1.610
$0.996
$0.644
Parana Technologies
$5.212
$5.824
DigiPath Technology Company
$5.739
$5.280
ChromeModa Solutions
$5.856
$4.802
IDEA Electronic Components Group
$5.270
Aztec Data Supply Inc.
$7.090
Advanced Electronics
$12.407
$11.787
GreenTree Electronics
S.R.D Solutions
Kepictronics
Assy Fe
A-Z Elektronik GmbH
Robosynatics
$3.027
Lucentia Tech
Lixinc
iodParts Technologies Inc.
Cyclops Electronics Ltd (Excess)
Infinite Electronics LLP (Excess)
Futuretech Components
The plastic/epoxy package body material makes the regulator lightweight and durable, ideal for use in a variety of applications.
Being surface mountable allows for easy and efficient installation on circuit boards, saving space and simplifying the assembly process.
The minimum output voltage of -1.6 V ensures a stable and reliable power supply for compatible devices or circuits.
With a high maximum operating temperature of 85°C, this regulator can withstand elevated temperatures without compromising performance.
The high maximum output current of 3 A makes this regulator suitable for powering devices that require higher power consumption.
Other Function Regulators TPS51100DGQR attributes and parameters. Explore more Other Function Regulators devices from Texas Instruments
JESD-30 Code:
Length:
No. of Functions:
No. of Outputs:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Maximum Output Current-1:
Minimum Output Voltage-1:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Packing Method:
Regulator Type:
Maximum Seated Height:
Surface Mount:
Terminal Form:
Terminal Pitch:
Terminal Position:
Width:
TPS51100DGQR Regulators trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
NSN
5962-01-628-0477, 5962016280477
NIIN
016280477
Texas Instruments Inc. (TI) is one of the world's leading semiconductor companies and a global leader in analog and digital signal processing technology. The company has had a major impact on the electronics industry for over 80 years, manufacturing integrated circuits (ICs), software and subsystems that leverage high-performance computing capabilities. It offers an extensive portfolio of solutions for a wide range of industries, from aerospace to medical devices and consumer products to communication systems. Over its long history, TI has become synonymous with quality, reliability and innovation. Today, TI is one of the largest semiconductor companies in the world with operations in more than 30 countries across six continents.
President, CEO
Haviv Ilan
Chairman
Richard K. Templeton
Senior VP, CFO
Rafael R. Lizardi
M - Fab
Fabrication
Fab Initiation
1997
USA
South Portland
Wafer Capacity
32,000
D - FAB
1966
Dallas
42,000
D MOS - 6
2002
25,000
D MOS - 5
1995
75,000
Miho - 8
1980
Japan
Inashiki
43,000
S FAB 1
Sherman
91,000
F - FAB
2001
Germany
Freising
37,000
R Fab 1
2010
Richardson
40,000
D HC Line
1999
2,000
JV3
Aizu Wakamatsu
45,000
C - FAB
2007
China
Chengdu
30,000
L - Fab
2015
Lehi
70,000
R - Fab 2
2022
S - FAB 2
2025
S - FAB 3
2028
1N4148
Digitron Semiconductors
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
87832-1420
Molex
87832-1420 by Molex is a 14-contact board connector with 0.079" pitch, suitable for commercial applications. It features matte tin over nickel finish, glass-filled polyamide insulator, and polarization key for easy assembly. Withstanding voltage of 1400VAC and operating temperature range from -55 to 105°C make it reliable for various electronic devices.
LL4148-GS08
Telefunken Microelectronics
RECTIFIER DIODE; Surface Mount: YES; JESD-609 Code: e0; No. of Elements: 1; Maximum Operating Temperature: 175 Cel; Maximum Non Repetitive Peak Forward Current: 2 A;
LM358MX
LM358MX by Texas Instruments is a dual operational amplifier with a max input offset voltage of 9000 uV. It has a nominal voltage of 5V and a min voltage gain of 15000. This op amp is commonly used in applications requiring amplification and signal conditioning.
1N4148WT
Tak Cheong Electronics Holdings
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
Goodwork Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Onsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
NXP Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; No. of Terminals: 3; Maximum Drain Current (ID): .2 A; Operating Mode: ENHANCEMENT MODE;
BSS138LT3G
BSS138LT3G by Onsemi is a N-CHANNEL FET with a min DS breakdown voltage of 50V. It is used for switching applications and has a max drain current of 0.2A and max drain-source on resistance of 3.5 ohm.
1N4148WS
Rugao Dachang Electronic
2N2222A
Rectron
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Package Shape: ROUND;
SMBJ18CA
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
NUP2105LT1G
NUP2105LT1G by Onsemi is a Transient Suppression Device with 350W power dissipation, 29.1V breakdown voltage, and 44V clamping voltage. Commonly used in electronic circuits for surge protection due to its bidirectional polarity and silicon diode element material.
Fairchild Semiconductor
CRCW040210K0FKED
Vishay Intertechnology
Vishay Intertechnology's CRCW040210K0FKED is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.063 W power dissipation. Ideal for surface mount applications in electronics due to its compact SMT package style and high operating temperature range of -55 to 155 °C.
MBR130T1G
MBR130T1G by Onsemi is a Schottky rectifier diode with max output current of 1A and max repetitive peak reverse voltage of 30V. It operates b/w -65 to 125°C, suitable for surface mount applications in electronics requiring low forward voltage drop.
Shandong Yiguang Electronic Joint Stock
LL4148
Lite-on Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
EU2B-YS303C
Idec
ROTARY SWITCH;
2N7002
2N7002 by Vishay Intertechnology is a N-CHANNEL FET with 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. Ideal for SWITCHING applications due to its SINGLE configuration with BUILT-IN DIODE. Operates in ENHANCEMENT MODE, suitable for surface mount with GULL WING terminals.
LM317LA
LM317LA by Texas Instruments is a bipolar regulator with an adjustable output voltage range from 1.2V to 37V and a max output current of 0.5A. Its metal package body material allows operation in temperatures ranging from 0°C to 125°C, making it suitable for various applications requiring precise voltage regulation in challenging environments.
UA79M12MLA/883B
UA79M12MLA/883B by Texas Instruments is a -12V fixed voltage regulator with 0.5A output current and 2.3V dropout voltage, suitable for applications requiring stable power supply. It operates in temperatures ranging from -55°C to 150°C, making it ideal for industrial use. With a max input voltage of 35V and high load regulation of 0.035%, it ensures reliable performance in various electronic systems.
LP2995LQ
Texas Instruments LP2995LQ is a DDR termination regulator with 16 terminals in a square chip carrier package. It features a 0.5mm terminal pitch, 0.8mm max seated height, and is surface mountable. Ideal for applications requiring precise voltage regulation in compact spaces.
MC33269DT3.3
Motorola
MC33269DT3.3 by Motorola is a 3-terminal fixed voltage regulator with an output of 3.3V and max current of 0.8A. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring stable voltage regulation in a compact surface-mount package.
SH323SC
Fairchild Semiconductor's SH323SC is a 3-terminal fixed voltage regulator with a max output current of 3A and nominal output voltage of 5V. It operates in temperatures ranging from 0 to 150°C, making it suitable for various applications requiring stable power supply such as industrial equipment and automotive electronics.
UA7812CKCP3
UA7812CKCP3 by Texas Instruments is a fixed 12V voltage regulator with 3 terminals and bipolar technology. It has a max load regulation of 0.24% and operates in temperatures ranging from 0 to 125°C. Ideal for applications requiring stable power supply in various electronic devices.
NX1117CE18Z,115
NX1117CE18Z,115 by NXP Semiconductors is a fixed voltage regulator with an output of 1.8V and max current of 0.8A. It operates in temperatures ranging from -40 to 125°C, making it suitable for various electronic applications requiring stable power supply. With a surface-mount package and high voltage tolerance of 2.5%, it is ideal for compact designs in industrial and consumer electronics.
L7806CV
Sgs-ates Componenti Electronici S P A
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Terminal Position: SINGLE; Technology: BIPOLAR;
MIC5504-3.3YMTTZ
Micrel
Other Regulators; No. of Terminals: 4; Package Code: SON; Terminal Form: NO LEAD; Maximum Input Voltage Absolute: 6 V; Maximum Voltage Tolerance: 3 %;
TPS73201MDRBREP
TPS73201MDRBREP by Texas Instruments is a BICMOS regulator with adjustable output voltage from 1.2V to 5.5V and max current of 0.25A. Ideal for applications requiring precise voltage regulation in compact designs due to its small outline package and surface-mount capability.
LM337T
Integrated Power Semiconductors
Other Regulators; No. of Terminals: 3; Package Body Material: PLASTIC/EPOXY; Nominal Dropout Voltage-1: 3 V; Surface Mount: NO; Maximum Output Voltage-1: -37 V;
LM305AJGP4
LM305AJGP4 by Texas Instruments is a bipolar technology regulator with adjustable output voltage ranging from 4.5V to 40V. Featuring a ceramic package, it has 8 terminals in an in-line style suitable for various applications requiring precise voltage regulation within -40°C to 70°C temperature range.
UA7915CKC3
UA7915CKC3 by Texas Instruments is a -15V fixed voltage regulator with 1.5A output current and 3.3V dropout voltage. It operates in temperatures ranging from 0 to 125°C, making it suitable for various electronic applications requiring stable power supply within a wide input voltage range up to 35V.
RH137H
Linear Technology
The Linear Technology RH137H is a MIL-STD-883 Class S bipolar regulator with an operating temperature range of -55 to 150°C. It offers adjustable output voltage from -1.2V to -37V, load regulation of 1%, and max output current of 0.15A. Ideal for applications requiring precise voltage regulation in harsh environments.
UA7918CKC1
UA7918CKC1 by Texas Instruments is a fixed bipolar regulator with an output voltage of -18V and max current of 1.5A. It has a plastic/epoxy package body, operates b/w 0-125°C, and offers 5% voltage tolerance. Ideal for applications requiring precise voltage regulation in various electronic devices.
SN0211032DBVR
Texas Instruments SN0211032DBVR is a CMOS regulator with 1.6V output voltage, 0.15A output current, and 4% voltage tolerance. It operates b/w -40°C to 125°C, suitable for applications requiring precise voltage regulation in compact designs like portable electronics and IoT devices.
LM723H
General Electric Solid State
Other Regulators; No. of Terminals: 10; Terminal Form: WIRE; JESD-30 Code: O-MBCY-W10; Qualification Status: Not Qualified; Package Shape: ROUND;
LM9036QMM-3.3/NOPB
National Semiconductor
Other Regulators; JESD-609 Code: e3; Moisture Sensitivity Level (MSL): 1; Maximum Time At Peak Reflow Temperature (s): 40; Terminal Finish: MATTE TIN; Peak Reflow Temperature (C): 260;
LP38501TSX-ADJ/NOPB
Other Regulators; No. of Terminals: 5; Minimum Output Voltage-1: .6 V; Packing Method: TR; No. of Outputs: 1; Maximum Output Current-1: 3 A;
LM304J4
LM304J4 by Texas Instruments is a ceramic packaged bipolar regulator with 14 terminals. It has an adjustable output voltage range from -0.015V to -40V, making it suitable for various applications requiring precise voltage regulation in temperatures ranging from 0°C to 70°C. The through-hole rectangular package style with a terminal pitch of 2.54mm offers ease of integration into electronic circuits.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LMR43610MSC3RPERQ1
LMR43610MSC3RPERQ1 by Texas Instruments is a 9-terminal switching regulator with a max output voltage of 32V and max output current of 1A. Ideal for automotive applications, it operates b/w -40 to 150°C, featuring a buck switcher config and PWM control mode at up to 2200kHz frequency.
DRV8316RRGFR
DRV8316RRGFR by Texas Instruments is a motion control IC with a rectangular package and a terminal form of gull wing. It has a max output current of 8A and can operate at temperatures ranging from -40 to 125°C. This IC is commonly used as a brushless DC motor controller in automotive applications.
CC2662R1FTWRGZRQ1
CC2662R1FTWRGZRQ1 by Texas Instruments is a 32-bit microcontroller with Cortex-M4F CPU, 48 MHz clock frequency, and 81920 bytes of RAM. Ideal for industrial applications, it features 8 ADC channels, 32 DMA channels, and peripherals like AES and PWM for efficient system integration.
DRV3255EPAPRQ1
DRV3255EPAPRQ1 by Texas Instruments is a Motion Control IC with 64 terminals, operating at -40 to 150°C. It is an AEC-Q100 compliant automotive-grade IC for Brushless DC Motor control, supporting supply voltages from 5V to 90V and output currents up to 3.5A. The package style includes a flatpack with heat sink/slug, suitable for surface mount applications in automotive systems.
DS160PT801ACBR
DS160PT801ACBR by Texas Instruments is a bus controller IC with 339 terminals, operating at -40 to 85°C. It supports PCI bus compatibility with a data transfer rate of 2000 MBps. This CMOS technology device has a thin profile and fine pitch package suitable for industrial applications.
TPS7A4301DGQR
TPS7A4301DGQR by Texas Instruments is an adjustable positive single output LDO regulator with a max output voltage of 14.5V and a dropout voltage of 0.6V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
UCC27284DRCR
UCC27284DRCR by Texas Instruments is a MOSFET gate driver with 2 channels, capable of handling a max output current of 3.5A. It operates in automotive-grade temperatures (-40 to 125°C) and has a turn-on/off time of 30µs. This chip carrier package with very thin profile is suitable for high side driver applications requiring fast switching speeds.
TPS51206DSQR
TPS51206DSQR by Texas Instruments is a DDR termination regulator with a max output current of 2A and min operating temperature of -40°C. It comes in a small outline package style, suitable for surface mount applications in various electronic devices requiring precise voltage regulation.
TPS51200DRCTG4
TPS51200DRCTG4 by Texas Instruments is a DDR termination regulator with 3A max output current, 0.6V min output voltage, and 3.5V max input voltage. It is used in applications requiring efficient power regulation in compact spaces due to its small outline package style and surface mount capability.
TPS51200DRCT
TPS51200DRCT by Texas Instruments is a DDR termination regulator with a max output current of 3A and min operating temperature of -40°C. This surface-mount device has a small outline package style, making it suitable for applications requiring precise voltage regulation in compact spaces. With a max input voltage of 3.5V, this regulator is ideal for various electronic devices where space and power efficiency are crucial.
TPS51200DRCRG4
TPS51200DRCRG4 by Texas Instruments is a DDR termination regulator with 3A max output current, 0.6V min output voltage, and 3.5V max input voltage. It is ideal for applications requiring efficient power management in compact spaces due to its small outline package and thin profile design.
TPS51200DRCR
TPS51200DRCR by Texas Instruments is a DDR termination regulator with a max output current of 3A. It operates in temperatures ranging from -40 to 85°C and has a package style of small outline, heat sink/slug, very thin profile. Ideal for applications requiring precise voltage regulation in compact spaces.
TPS51206DSQT
TPS51206DSQT by Texas Instruments is a DDR termination regulator with 10 terminals, capable of delivering up to 2A output current. Operating temperature ranges from -40°C to 105°C, making it suitable for various applications requiring precise voltage regulation in compact spaces. Its small outline package with a very thin profile and surface mount capability enhances its versatility in electronic designs.
TPS51200QDRCRQ1
TPS51200QDRCRQ1 by Texas Instruments is a DDR termination regulator with a max output current of 3A and min operating temperature of -40°C. It comes in a small outline package style with very thin profile, suitable for automotive applications due to AEC-Q100 screening level.
TPS51100DGQ
TPS51100DGQ by Texas Instruments is a DDR termination regulator with 3A max output current. It operates b/w -40 to 85°C, in a small outline package with gull wing terminals. Ideal for applications requiring precise voltage regulation and compact design in electronic devices.
TPS51206DSQ
TPS51206DSQ by Texas Instruments is a DDR termination regulator with 10 terminals in a small outline package. It operates b/w -40 to 85°C, making it suitable for various applications. The surface-mount device has a square shape and very thin profile, ideal for compact designs.
TPS51100DGQRG4
TPS51100DGQRG4 by Texas Instruments is a DDR termination regulator with a max output current of 3A. It operates in temperatures ranging from -40 to 85°C and has a small outline package style suitable for surface mount applications. With a min output voltage of 0.6V, it is ideal for various electronic devices requiring efficient power regulation.
TPS51100DGQG4
TPS51100DGQG4 by Texas Instruments is a DDR termination regulator with 10 terminals in a small outline package. It offers a max output current of 3A and operates b/w -40 to 85°C. Ideal for applications requiring precise voltage regulation in compact designs.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved