Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TLC5930PWP by Texas Instruments is a graphics display driver with 24 terminals, operating voltage of 3-3.6V, and constant-current output for LED displays. It features a small outline package shape, dual terminal position, and Gull Wing form suitable for segment display applications at temperatures ranging from -20 to 85°C.
Median Price
$4.402
Lifecycle Status
Suppliers In-Stock
7
In-Stock Inventory
1k+
Texas Instruments
1+ parts
$4.453
100+ parts
$3.630
1k+ parts
$2.420
10k+ parts
-
Rochester
$3.480
$3.110
$2.930
DigiKey
$4.580
Verical
$4.350
$3.888
$3.663
Digiode
$3.192
Vyrian
LWI Electronics Inc
Corphita
$3.024
Parana Technologies
$10.747
$11.231
DigiPath Technology Company
$11.834
ChromeModa Solutions
$12.075
$9.902
IDEA Electronic Components Group
$11.471
$10.868
Authorized Procurement Solutions
Futuretech Components
Cyclops Electronics Ltd (Excess)
Provides durability and protection for the internal components.
Segment display mode allows for clear and easy-to-read information display.
Enables easy installation and space-saving design.
Allows for higher voltage input, improving performance.
Rectangular shape is commonly used and fits well in various applications.
Stable power supply for consistent performance.
Sufficient terminals for connectivity and functionality.
Compact design with heat sink for efficient heat dissipation.
Ensures operation even at lower voltage levels.
Wide operating temperature range for versatility.
Constant current output for stable and reliable performance.
Can operate in low temperature environments.
High-quality terminal finish for enhanced conductivity.
Dual terminal position for added connectivity options.
Low profile design for compact installations.
Narrow width for space-saving applications.
Sufficient time for reflow process during installation.
High peak reflow temperature for secure component attachment.
Standard length for compatibility with various setups.
Advanced BiCMOS technology for improved performance and efficiency.
Gull wing terminal form for reliable solder connections.
Able to handle higher supply currents for enhanced performance.
Standard input characteristics for easy compatibility.
Nominal voltage supply for stable operation.
12 segments for displaying information with clarity.
Fine terminal pitch for compact layout design.
High minimum fmax for faster operation and refresh rates.
Moisture sensitivity level of 2 for standard protection against moisture.
Specifically designed for LED display driver interface.
Graphics Display Drivers TLC5930PWP attributes and parameters. Explore more Graphics Display Drivers devices from Texas Instruments
Additional Features:
Display Mode:
Input Characteristics:
Interface IC Type:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
Multiplexed Display Capability:
No. of Functions:
No. of Segments:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Characteristics:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Power Supplies (V):
Qualification:
Maximum Seated Height:
Sub-Category:
Maximum Supply Current:
Maximum Supply Voltage:
Minimum Supply Voltage:
Nominal Supply Voltage:
Surface Mount:
Technology:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width:
Minimum fmax:
TLC5930PWP Interface ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Assembly/Origin - Mult Devices 17/Oct/2017
Texas Instruments Inc. (TI) is one of the world's leading semiconductor companies and a global leader in analog and digital signal processing technology. The company has had a major impact on the electronics industry for over 80 years, manufacturing integrated circuits (ICs), software and subsystems that leverage high-performance computing capabilities. It offers an extensive portfolio of solutions for a wide range of industries, from aerospace to medical devices and consumer products to communication systems. Over its long history, TI has become synonymous with quality, reliability and innovation. Today, TI is one of the largest semiconductor companies in the world with operations in more than 30 countries across six continents.
President, CEO
Haviv Ilan
Chairman
Richard K. Templeton
Senior VP, CFO
Rafael R. Lizardi
M - Fab
Fabrication
Fab Initiation
1997
USA
South Portland
Wafer Capacity
32,000
D - FAB
1966
Dallas
42,000
D MOS - 6
2002
25,000
D MOS - 5
1995
75,000
Miho - 8
1980
Japan
Inashiki
43,000
S FAB 1
Sherman
91,000
F - FAB
2001
Germany
Freising
37,000
R Fab 1
2010
Richardson
40,000
D HC Line
1999
2,000
JV3
Aizu Wakamatsu
45,000
C - FAB
2007
China
Chengdu
30,000
L - Fab
2015
Lehi
70,000
R - Fab 2
2022
S - FAB 2
2025
S - FAB 3
2028
SBAV99LT1G
Onsemi
SBAV99LT1G by Onsemi is a rectifier diode with a max repetitive peak reverse voltage of 100V. It has a small outline package style and a fast max reverse recovery time of 0.006 us. It is commonly used in applications requiring low power dissipation and high operating temperatures.
2N7002
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 7.5 ohm; Maximum Drain Current (Abs) (ID): .115 A;
1N4148WT
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
CRCW080510K0FKEA
Vishay Intertechnology
Vishay Intertechnology's CRCW080510K0FKEA is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 reference standard compliance and -55 to 155 °C operating temperature range.
1N4148
Hitachi
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BSS138
Infineon Technologies
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Drain Current (Abs) (ID): .2 A; Maximum Feedback Capacitance (Crss): 8 pF;
LM358MX
LM358MX by Texas Instruments is a dual operational amplifier with a max input offset voltage of 9000 uV. It has a nominal voltage of 5V and a min voltage gain of 15000. This op amp is commonly used in applications requiring amplification and signal conditioning.
EU2B-YS2J03F
Idec
ROTARY SWITCH;
ULN2803ADW
ULN2803ADW by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates b/w -40 to 85 °C and has a max supply voltage of 3 V. Ideal for applications requiring buffer or inverter-based peripheral drivers with sink current flow direction.
INA826AIDGKR
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
ABS10-32.768KHZ-T
Abracon
Abracon's ABS10-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and wearables due to its compact size and low power consumption.
2N2222A
Semicoa
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148W-7-F
Multicomp Pro
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Taiwan Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Sangdest Microelectronics (Nanjing)
M24308/2-1F
Amphenol
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body or Shell Style: RECEPTACLE; Body Length: 1.228 inch; No. of Rows Loaded: 2;
BAV99
NXP Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Secos
Hi-tron Semiconductor
Weitron Technology
RECTIFIER DIODE; Surface Mount: YES; Maximum Operating Temperature: 150 Cel; Maximum Output Current: .215 A; JESD-609 Code: e0; Maximum Forward Voltage (VF): .715 V;
LM3410XMYE/NOPB
LM3410XMYE/NOPB by Texas Instruments is a graphics display driver with 8 terminals, operating from -40 to 125 °C. It has a supply voltage range of 2.7-5.5 V and is suitable for automotive applications as an LED display driver with a small outline package style.
TCA6507RUER
TCA6507RUER by Texas Instruments is a graphics display driver with 12 terminals, operating voltage range of 1.65V to 3.6V, and max supply current of 0.04mA. It features serial data input mode, open-drain output characteristics, and industrial temperature grade suitability for LED display driver applications.
ZXLD1360ET5TA
Zetex Plc
LED DISPLAY DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 5; Package Code: VSSOP; Package Shape: RECTANGULAR;
MAX6954AAX
Maxim Integrated
MAX6954AAX by Maxim Integrated is a 16-digit LED display driver with serial data input mode. It operates at supply voltages of 2.7V to 5.5V, suitable for automotive applications due to its temperature grade and CMOS technology. The small outline package with shrink pitch and gull wing terminal form makes it ideal for surface mount designs in various electronic devices.
LT3756EUD-1#PBF
Linear Technology
LED DISPLAY DRIVER; Temperature Grade: OTHER; Terminal Form: NO LEAD; No. of Terminals: 16; Package Code: HVQCCN; Package Shape: SQUARE;
HV9910BNG-G
Microchip Technology
HV9910BNG-G by Microchip Technology is a LED display driver with 16 terminals, operating b/w -40 to 125 °C. It has a supply voltage range of 8-450 V and is suitable for automotive applications due to its TS 16949 screening level. The package style is small outline, making it compact for various graphics display driver needs.
AY0438-I/P
Microchip Technology's AY0438-I/P is a Graphics Display Driver with 32 segments, 4-digit display mode, and serial data input. It operates in industrial temperature range (-40 to 85 °C) and requires a supply voltage of 5V. Ideal for applications requiring liquid crystal display drivers in various industries.
LT3756EUD-1#TRPBF
Analog Devices
LT3756EUD-1#TRPBF by Analog Devices is a graphics display driver with a max supply voltage of 100V. It has 16 terminals and operates in temperatures ranging from -40 to 125°C. This LED display driver is commonly used in automotive applications.
TLC59711PWPR
TLC59711PWPR by Texas Instruments is a graphics display driver with 12 channels, constant-current output, and serial data input mode. It operates in industrial temperature range (-40 to 85 °C) and supports LED displays. Ideal for applications requiring segment display mode and small outline package style.
CL220K4-G
CL220K4-G by Microchip Technology is a graphics display driver with 2 terminals, operating voltage range of 5-220V, and temp. range of -40 to 125°C. Ideal for automotive applications, this LED display driver has a small outline package and matte tin terminal finish.
FL7733AMX
FL7733AMX by Onsemi is a LED display driver with 15V nominal voltage. It features 8 terminals, matte tin finish, and gull wing terminal form. This small outline package is ideal for graphics display applications requiring a power supply of 15V.
MAX6957AAI+
LED DISPLAY DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 28; Package Code: SOP; Package Shape: RECTANGULAR;
PCA9626B/S911,118
NXP Semiconductors' PCA9626B/S911,118 is a Graphics Display Driver with 48 terminals in a square flatpack package. It operates b/w -40°C to 85°C, suitable for industrial applications. With power supplies of 2.5/5V, it's ideal for surface mount designs requiring precise control and management of graphic displays.
IS31FL3731-QFLS2-TR
Lumissil Microsystems
LED DISPLAY DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 28; Package Code: HVQCCN; Package Shape: SQUARE;
LT3476EUHF#TRPBF
Analog Devices' LT3476EUHF#TRPBF is a LED display driver with 8 segments, operating voltage range of 2.8V to 16V, and temperature grade up to 85°C. Ideal for graphics displays, it features a parallel data input mode and comes in a rectangular chip carrier package style for surface mount applications.
LT3474EFE-1#PBF
LT3474EFE-1#PBF by Analog Devices is a graphics display driver with a supply voltage range of 4V to 36V. It features a small outline package style with 16 terminals and operates in industrial temperature grades from -40°C to 85°C. Ideal for LED displays, this IC has a peak reflow temperature of 260°C and matte tin terminal finish.
MIC2289-34YML-TR
MIC2289-34YML-TR by Microchip: LED display driver with 3 segments, 2.5V min supply voltage, and 10V max supply voltage. Ideal for automotive applications due to -40 to 125 °C operating temp range and small outline package style.
TPS92512DGQR
TPS92512DGQR by Texas Instruments is a LED display driver with 10 terminals, operating voltage range of 4.5V to 42V, and temperature grade suitable for automotive applications. It features a small outline package with gull wing terminals and can withstand peak reflow temperature of 260°C for up to 30 seconds. Ideal for graphics display drivers requiring high reliability in harsh environments.
LT3518EUF#PBF
LED DISPLAY DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: NO LEAD; No. of Terminals: 16; Package Code: HVQCCN; Package Shape: SQUARE;
TPS92515AHVQDGQRQ1
TPS92515AHVQDGQRQ1 by Texas Instruments is a LED display driver with 10 terminals, suitable for automotive applications. It operates b/w -40 to 125 °C with a supply voltage range of 5.5-65 V. The package style is small outline, heat sink/slug, thin profile, and shrink pitch.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
CC2662R1FTWRGZRQ1
CC2662R1FTWRGZRQ1 by Texas Instruments is a 32-bit microcontroller with Cortex-M4F CPU, 48 MHz clock frequency, and 81920 bytes of RAM. Ideal for industrial applications, it features 8 ADC channels, 32 DMA channels, and peripherals like AES and PWM for efficient system integration.
DS160PT801ACBR
DS160PT801ACBR by Texas Instruments is a bus controller IC with 339 terminals, operating at -40 to 85°C. It supports PCI bus compatibility with a data transfer rate of 2000 MBps. This CMOS technology device has a thin profile and fine pitch package suitable for industrial applications.
DRV8316RRGFR
DRV8316RRGFR by Texas Instruments is a motion control IC with a rectangular package and a terminal form of gull wing. It has a max output current of 8A and can operate at temperatures ranging from -40 to 125°C. This IC is commonly used as a brushless DC motor controller in automotive applications.
DRV3255EPAPRQ1
DRV3255EPAPRQ1 by Texas Instruments is a Motion Control IC with 64 terminals, operating at -40 to 150°C. It is an AEC-Q100 compliant automotive-grade IC for Brushless DC Motor control, supporting supply voltages from 5V to 90V and output currents up to 3.5A. The package style includes a flatpack with heat sink/slug, suitable for surface mount applications in automotive systems.
UCC27284DRCR
UCC27284DRCR by Texas Instruments is a MOSFET gate driver with 2 channels, capable of handling a max output current of 3.5A. It operates in automotive-grade temperatures (-40 to 125°C) and has a turn-on/off time of 30µs. This chip carrier package with very thin profile is suitable for high side driver applications requiring fast switching speeds.
LMR43610MSC3RPERQ1
LMR43610MSC3RPERQ1 by Texas Instruments is a 9-terminal switching regulator with a max output voltage of 32V and max output current of 1A. Ideal for automotive applications, it operates b/w -40 to 150°C, featuring a buck switcher config and PWM control mode at up to 2200kHz frequency.
TPS7A4301DGQR
TPS7A4301DGQR by Texas Instruments is an adjustable positive single output LDO regulator with a max output voltage of 14.5V and a dropout voltage of 0.6V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
TLC59116IPWR
TLC59116IPWR by Texas Instruments is a graphics display driver with 16 channels, constant-current output, and serial data input mode. It operates in industrial temperature range (-40 to 85 °C) and has a small outline package style for surface mount applications. Ideal for LED displays, it supports supply voltages of 3.3/5 V with a max current of 37 mA.
TLC59116IPWRG4
TLC59116IPWRG4 by Texas Instruments is a LED display driver with 16 segments, operating voltage range of 3-5.5V, and serial data input mode. Ideal for industrial applications, it comes in a small outline package with 28 terminals and can withstand temperatures from -40 to 85°C.
TLC59116IRHBR
TLC59116IRHBR by Texas Instruments is a graphics display driver with 16 channels, constant-current output, and serial data input mode. It operates b/w -40 to 85 °C and has a max supply voltage of 5.5 V. Ideal for LED display applications due to its compact chip carrier package style and industrial temperature grade suitability.
TLC5916IPWRG4
TLC5916IPWRG4 by Texas Instruments is a graphics display driver with 16 terminals, operating voltage of 3-5.5V, and constant-current output. It has a small outline package shape for segment display mode applications. With a max supply current of 22mA, it's ideal for automotive temperature grade environments at -40 to 125°C.
TLC59116FIPWR
LED DISPLAY DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 28; Package Code: TSSOP; Package Shape: RECTANGULAR;
LED DISPLAY DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 20; Package Code: HTSSOP; Package Shape: RECTANGULAR;
TLC5916IPWR
TLC5916IPWR by Texas Instruments is a graphics display driver with serial data input mode and constant-current output. It operates b/w -40 to 125 °C, suitable for automotive applications. With a max supply voltage of 5.5 V and 22 mA supply current, it's ideal for LED display driving in compact designs.
TLC59116FIRHBR
LED DISPLAY DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 32; Package Code: HVQCCN; Package Shape: SQUARE;
TLC5926IPWPRG4
TLC5926IPWPRG4 by Texas Instruments is a graphics display driver with 24 terminals, operating voltage of 3-5.5V, and constant-current output. Ideal for automotive applications, it features a small outline package with dual terminal position and Gull Wing form factor. Supports up to 30MHz fmax and serial data input mode for LED displays.
TLC5926IPWPR
TLC5926IPWPR by Texas Instruments is a graphics display driver with 24 terminals, operating voltage range of 3-5.5V, and constant-current output. It is ideal for LED displays in automotive applications due to its small outline package and dual terminal position. The IC features serial data input mode, standard input characteristics, and a max supply current of 20mA.
TLC5971PWPR
TLC5971PWPR by Texas Instruments is a graphics display driver with 12 channels and constant-current output. It operates at a supply voltage range of 6-17V and has a small outline package style. This IC is commonly used in LED display applications.
TLC59116ITPWRQ1
TLC59116ITPWRQ1 by Texas Instruments is a graphics display driver with 16 channels, operating at -40 to 105 °C. It features a serial data input mode, small outline package style, and nickel palladium gold terminal finish. Ideal for LED displays in industrial applications due to its low min supply voltage of 3 V and max supply voltage of 5.5 V.
TLC5940PWPR
TLC5940PWPR by Texas Instruments is a graphics display driver with 16 channels, operating at 30 MHz. It features a serial data input mode and supports dot matrix display mode. Ideal for LED displays in industrial applications due to its wide temperature range and small outline package style.
TLC5916IDR
LED DISPLAY DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;
TLC59281DBQR
TLC59281DBQR by Texas Instruments is a graphics display driver with 24 terminals, operating voltage of 3-5.5V, and constant-current output. It features a serial data input mode and small outline package style for LED displays. Ideal for industrial applications requiring high-quality graphics on compact screens.
TLC5916IDRG4
TLC5916IDRG4 by Texas Instruments is a graphics display driver with 16 terminals, operating voltage of 3-5.5V, and constant-current output. It is used in automotive applications for segment display mode with serial data input at temperatures ranging from -40 to 125°C.
TLC59108IPWR
LED DISPLAY DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 20; Package Code: TSSOP; Package Shape: RECTANGULAR;
TLC5916IPW
TLC5916IPW by Texas Instruments is a graphics display driver with 16 terminals, operating at -40 to 125 °C. It features constant-current output, serial data input mode, and supports segment display mode. Ideal for automotive applications due to its small outline package style and nickel palladium gold terminal finish.
TLC5927IDBQR
TLC5927IDBQR by Texas Instruments is a graphics display driver with 24 terminals, operating voltage range of 3-5.5V, and constant-current output for LED displays. It features a small outline package style, dual terminal position, and nickel palladium gold finish. Ideal for automotive applications due to its wide temperature range (-40 to 125 °C) and moisture sensitivity level of 2 MSL.
TLC59711PWP
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved