Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
REF5040IDR by Texas Instruments is a voltage reference with an output voltage range of 4.0919V to 4.1V, suitable for automotive applications. It features a small outline package style, adjustable output, and operates in temperatures from -40°C to 125°C. This three-terminal reference has a max supply voltage of 18V and low temperature coefficient of 3 ppm/°C.
Median Price
$8.860
Lifecycle Status
Suppliers In-Stock
8
In-Stock Inventory
1k+
Texas Instruments
1+ parts
$5.246
100+ parts
$4.277
1k+ parts
$2.851
10k+ parts
-
Mouser Electronics
$5.840
$5.290
$4.930
DigiKey
$5.838
$5.716
Nova Conductors
$4.278
Digiode
$4.984
Vyrian
Chip Stock
LIBRA Elektronik GmbH
Continental Prestige Electronics
$4.193
Argo Parts USA
Netroflash
Ampacity Inc.
$4.460
Semicontronic
$4.348
$4.326
Corphita
$4.721
Corohmni
$9.544
Parana Technologies
$9.814
$10.385
DigiPath Technology Company
$10.806
$9.942
ChromeModa Solutions
$11.027
$9.042
IDEA Electronic Components Group
$10.476
$9.924
Advanced Electronics
$17.612
$16.027
$14.442
iodParts Technologies Inc.
Lixinc
A-Z Elektronik GmbH
Futuretech Components
Authorized Procurement Solutions
Kepictronics
The use of plastic/epoxy material in the package body makes this voltage reference lightweight and durable, ideal for applications where weight and durability are important factors.
The surface mount feature allows for easy and convenient installation on a PCB, saving space and simplifying the assembly process.
The ability to adjust the output voltage allows for greater flexibility and customization in various applications, making this voltage reference a versatile choice.
The rectangular package shape makes this voltage reference easy to handle and integrate into different circuit designs, providing ease of use for designers.
With 8 terminals available, this voltage reference offers multiple connection options, enabling more complex circuit configurations and applications.
The small outline package style saves valuable board space, making it suitable for compact designs and applications where size is a critical consideration.
The high maximum operating temperature of 125°C ensures reliable performance in demanding environments, making this voltage reference suitable for a wide range of applications.
The precise minimum output voltage of 4.0919V ensures accurate voltage regulation, making this voltage reference a dependable choice for precision applications.
The low minimum operating temperature of -40°C guarantees operation in extreme cold conditions, making this voltage reference suitable for harsh environments.
The nickel palladium gold terminal finish provides excellent conductivity and corrosion resistance, ensuring long-term reliability and stable performance.
The maximum output voltage of 4.1V meets the requirements of many voltage-sensitive applications, making this voltage reference a versatile choice for various circuit designs.
The dual terminal position allows for flexibility in circuit connection, offering multiple wiring options for different design requirements.
The low maximum seated height of 1.75mm allows for a compact and streamlined design, making this voltage reference suitable for space-constrained applications.
The narrow width of 3.9mm enables easy integration into tight spaces, making this voltage reference ideal for compact circuit designs.
Being a three-terminal voltage reference, this product offers stable and accurate voltage references for precision circuit applications, ensuring reliable performance.
The low minimum supply voltage of 2.7V allows for operation in low-power scenarios, making this voltage reference suitable for energy-efficient designs.
With a maximum time of 30 seconds at peak reflow temperature, this voltage reference is easy to solder onto PCBs, simplifying the assembly process.
The high peak reflow temperature of 260°C ensures stable solder joints and reliable connections, making this voltage reference suitable for high-temperature applications.
The compact length of 4.9mm facilitates easy installation and integration, making this voltage reference ideal for small-scale circuit designs.
The automotive temperature grade ensures reliable performance in automotive applications, making this voltage reference a suitable choice for automotive electronics.
The gull wing terminal form provides secure connections and simplifies the soldering process, making this voltage reference easy to handle and install.
The tight maximum voltage tolerance of 0.1% ensures precise voltage regulation, making this voltage reference ideal for high-precision applications.
The standard terminal pitch of 1.27mm enables easy connection and compatibility with standard PCB layouts, making this voltage reference versatile and user-friendly.
With a low maximum voltage temperature coefficient of 3 ppm/°C, this voltage reference provides stable output voltage over a wide temperature range, ensuring reliable performance.
The MSL 2 rating indicates moderate moisture sensitivity, making this voltage reference suitable for various environmental conditions and storage requirements.
The high maximum supply voltage of 18V provides flexibility in power source selection, making this voltage reference compatible with a wide range of operating voltages.
The precise nominal output voltage of 4.096V ensures accurate voltage references, making this voltage reference suitable for applications requiring stable voltage regulation.
Voltage References REF5040IDR attributes and parameters. Explore more Voltage References devices from Texas Instruments
Other IC type:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Outputs:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Maximum Output Voltage:
Minimum Output Voltage:
Nominal Output Voltage:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Qualification:
Maximum Seated Height:
Maximum Supply Voltage (Vsup):
Minimum Supply Voltage (Vsup):
Surface Mount:
Max Voltage Temp Coef:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Trim or Adjustable Output (V):
Maximum Voltage Tolerance:
Width (mm):
REF5040IDR Other Function Semiconductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Design/Specification - Design 25/Feb/2022 REF50xx Datasheet 21/Jun/2023
Texas Instruments Inc. (TI) is one of the world's leading semiconductor companies and a global leader in analog and digital signal processing technology. The company has had a major impact on the electronics industry for over 80 years, manufacturing integrated circuits (ICs), software and subsystems that leverage high-performance computing capabilities. It offers an extensive portfolio of solutions for a wide range of industries, from aerospace to medical devices and consumer products to communication systems. Over its long history, TI has become synonymous with quality, reliability and innovation. Today, TI is one of the largest semiconductor companies in the world with operations in more than 30 countries across six continents.
President, CEO
Haviv Ilan
Chairman
Richard K. Templeton
Senior VP, CFO
Rafael R. Lizardi
M - Fab
Fabrication
Fab Initiation
1997
USA
South Portland
Wafer Capacity
32,000
D - FAB
1966
Dallas
42,000
D MOS - 6
2002
25,000
D MOS - 5
1995
75,000
Miho - 8
1980
Japan
Inashiki
43,000
S FAB 1
Sherman
91,000
F - FAB
2001
Germany
Freising
37,000
R Fab 1
2010
Richardson
40,000
D HC Line
1999
2,000
JV3
Aizu Wakamatsu
45,000
C - FAB
2007
China
Chengdu
30,000
L - Fab
2015
Lehi
70,000
R - Fab 2
2022
S - FAB 2
2025
S - FAB 3
2028
BSS138-7-F
Diodes Incorporated
Diodes Inc. BSS138-7-F is a N-channel FET with 50V DS breakdown voltage, 0.2A max drain current, and 3.5 ohm RDS(on). Ideal for switching applications in small outline packages with matte tin finish, operating up to 150°C peak reflow temp.
LL4148
Taiwan Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
M24308/2-1F
TE Connectivity
TE Connectivity's M24308/2-1F D-Sub Connector features 9 contacts, 2 rows, and a shell size of 1/E. With a rated current of 7.5A, it operates b/w -55°C to 125°C. Ideal for cable mounting applications, this connector has a steel shell with cadmium finish and uses crimp termination for female contact pins.
0460-202-16141
TE Connectivity's 0460-202-16141 contact features a crimp terminal type, machined contact design, and rated AC voltage of 1500V. With a wire gauge range of 20-16 AWG, it is ideal for applications requiring a male round pin-socket contact style in assembly products.
USB2514BI-AEZG
Standard Microsystems
BUS CONTROLLER, UNIVERSAL SERIAL BUS; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 36; Package Code: HVQCCN; Package Shape: SQUARE;
ERJ6ENF10R0V
Panasonic
Panasonic ERJ6ENF10R0V is a 10 ohm fixed resistor with 1% tolerance, suitable for surface mount applications. With a rated power dissipation of 0.125W and operating voltage of 150V, it operates b/w -55°C to 155°C. Its metal glaze/thick film technology ensures stable performance in various electronic circuits.
LM7805CT/NOPB
National Semiconductor
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Voltage Tolerance: 5 %; Operating Temperature (TJ-Max): 125 Cel; Maximum Output Voltage-1: 5.25 V;
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
STM32H753ZIT6
STMicroelectronics
STM32H753ZIT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, offering 20-Ch 16-Bit ADC and 2-Ch 12-Bit DAC channels. With a clock frequency of up to 48 MHz, it is ideal for industrial applications requiring CAN, Ethernet, and USB connectivity. This microcontroller operates b/w -40°C to +85°C temperature range.
BAT54SLT1G
Onsemi
BAT54SLT1G by Onsemi is a fast recovery Schottky diode with 2 elements in series connected configuration. It has a max reverse recovery time of 0.005 us and a max forward voltage of 0.8 V. Ideal for applications requiring high-speed rectification, it operates b/w -55 to 150 °C and can handle a max output current of 0.2 A.
Souriau-sunbank Connection Technologies
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body Length: 1.228 inch; Mounting Type: CABLE AND PANEL; Termination Type: CRIMP;
SMBJ18CA
Good-ark Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Maximum Time At Peak Reflow Temperature (s): 10; JESD-609 Code: e3;
2N7002
Itt Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Package Body Material: PLASTIC/EPOXY; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Package Shape: RECTANGULAR;
C1005X7R1E103K050BB
TDK
The TDK C1005X7R1E103K050BB is a ceramic capacitor with capacitance of 0.01uF and rated DC voltage of 25V. It features X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications requiring compact size and stable performance in various electronic circuits.
MBRA160T3G
MBRA160T3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.51V. It operates b/w -55 to 150°C, has a reverse test voltage of 60V, and is ideal for power applications due to its high efficiency and small outline package style.
CL31B104KBCNNNC
Samsung Electro-mechanics
Samsung Electro-mechanics CL31B104KBCNNNC is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It features X7R temperature characteristics, -55 to 125 °C operating range, and compact SMT package style. Ideal for applications requiring high reliability in compact electronic devices.
SS14
Cheng-yi Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Dionics-usa
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LTC6655BHMS8-4.096#TRPBF
Linear Technology
THREE TERMINAL VOLTAGE REFERENCE; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: TSSOP; Package Shape: SQUARE; Surface Mount: YES;
LM4040DIM3-2.5+T
Analog Devices
LM4040DIM3-2.5+T by Analog Devices is a 3-terminal voltage reference with output voltage of 2.5V, ±1% tolerance, and 150 ppm/°C temp coef. Ideal for industrial applications requiring precise voltage regulation in compact designs due to its small outline package and wide operating temperature range from -40 to 85 °C.
TL431CD
THREE TERMINAL VOLTAGE REFERENCE; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
ADR4550BRZ
Analog Devices' ADR4550BRZ is a voltage reference IC with 3-terminal design, offering a nominal output of 5V and max supply voltage of 15V. With a low voltage tolerance of 0.02%, it is ideal for automotive applications requiring precise voltage regulation in a compact small outline package.
TL431IDBZR,215
Nexperia
THREE TERMINAL VOLTAGE REFERENCE; Temperature Grade: INDUSTRIAL; No. of Terminals: 3; Package Code: TSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LM4040BIM3-2.0/NOPB
LM4040BIM3-2.0/NOPB by Texas Instruments is a 3-terminal voltage reference with a small outline, thin profile package. It operates b/w -40 to 85°C, providing a stable output voltage of 2.048V with a max tolerance of 0.2%. Ideal for industrial applications requiring precise voltage references in compact designs.
REF3012AIDBZT
REF3012AIDBZT by Texas Instruments is a 3-terminal voltage reference with a nominal output voltage of 1.25V, suitable for automotive applications. It operates in temperatures ranging from -40 to 125°C and has a max supply voltage of 5.5V, making it ideal for precision voltage regulation in compact electronic devices.
ADR03AKSZ-REEL7
ADR03AKSZ-REEL7 by Analog Devices is a voltage reference with adjustable output (V) ranging from 2.495 V to 2.505 V, suitable for automotive applications. It operates in temperatures from -40°C to 125°C and has a max supply voltage of 36 V, making it ideal for various electronic systems requiring precise voltage regulation.
ADR431BRZ-REEL7
ADR431BRZ-REEL7 by Analog Devices is a voltage reference IC with a nominal output of 2.5V, suitable for automotive applications. It offers a max voltage tolerance of 0.04% and operates in temperatures ranging from -40 to 125°C. This three-terminal device comes in a small outline package with surface-mount capabilities.
LM4041CIM3-1.2/NOPB
TWO TERMINAL VOLTAGE REFERENCE; Temperature Grade: INDUSTRIAL; No. of Terminals: 3; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
ADR4525ARZ
ADR4525ARZ by Analog Devices is a voltage reference IC with 2.5V output, 0.01A max current, and 4ppm/°C temp coef. Ideal for automotive applications due to its -40 to 125 °C operating range and small outline package style. Features matte tin terminals in a rectangular shape suitable for surface mount assembly.
LT1461AIS8-2.5#PBF
LT1461AIS8-2.5#PBF by Analog Devices is a 3-terminal voltage reference with a nominal output voltage of 2.5V, suitable for industrial applications. It operates b/w -40 to 85°C, with a low temp coefficient of 3 ppm/°C and can handle supply voltages from 3V to 20V. This small outline package features surface mount technology and matte tin terminal finish.
AD1582BRTZ-REEL7
AD1582BRTZ-REEL7 by Analog Devices is a 3-terminal voltage reference with a nominal output voltage of 2.5V and max supply voltage of 12V. It operates in automotive-grade conditions, with a temperature range from -40 to 125°C, making it suitable for precision voltage regulation in automotive electronics and other applications requiring stable voltage references.
LM385M3-1.2/NOPB
TWO TERMINAL VOLTAGE REFERENCE; Temperature Grade: COMMERCIAL; No. of Terminals: 3; Package Code: TSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
REF5050AIDG4
REF5050AIDG4 by Texas Instruments is a voltage reference with output voltage range of 4.995-5.005V, suitable for automotive applications. It has a small outline package style, operates b/w -40 to 125°C, and offers a max voltage tolerance of 0.1%.
LM4041CIM3-1.2/NOPB by Texas Instruments is a voltage reference IC with output voltage range of 1.211V to 1.239V, suitable for industrial applications. It features a small outline package style, dual terminal position, and operates in temperature range of -40°C to 85°C. The device has a max voltage tolerance of 0.5% and peak reflow temperature of 260°C, making it ideal for precision voltage regulation in various electronic circuits.
TL431ACDCKR
TL431ACDCKR by Texas Instruments is a voltage reference IC with adjustable output from 2.47V to 2.52V, suitable for commercial applications. It features a max output current of 0.1A and operates in temperatures ranging from 0°C to 70°C. This small outline package with gull wing terminals is ideal for precision voltage regulation in various electronic circuits.
TL431BCDBZR
NXP Semiconductors
THREE TERMINAL VOLTAGE REFERENCE; Temperature Grade: COMMERCIAL; No. of Terminals: 3; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LM4040C25FTA
Diodes Inc. LM4040C25FTA is a 3-terminal voltage reference with output voltage of 2.4875-2.5125V, temp coef of 100 ppm/°C, and max tolerance of 0.5%. It's used in automotive applications due to its small size (1.3x2.92mm), dual terminal position, and temp range of -40 to 125 °C.
LM431AIM3/NOPB
LM431AIM3/NOPB by Texas Instruments is a voltage reference with adjustable output (2.44-2.55V). It is a small outline, thin profile package suitable for industrial applications. With a max output current of 0.1A and temperature coefficient of 54.509 ppm/°C, it is ideal for precision voltage regulation in compact electronic devices.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
TPS7A4301DGQR
TPS7A4301DGQR by Texas Instruments is an adjustable positive single output LDO regulator with a max output voltage of 14.5V and a dropout voltage of 0.6V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
UCC27284DRCR
UCC27284DRCR by Texas Instruments is a MOSFET gate driver with 2 channels, capable of handling a max output current of 3.5A. It operates in automotive-grade temperatures (-40 to 125°C) and has a turn-on/off time of 30µs. This chip carrier package with very thin profile is suitable for high side driver applications requiring fast switching speeds.
LMR43610MSC3RPERQ1
LMR43610MSC3RPERQ1 by Texas Instruments is a 9-terminal switching regulator with a max output voltage of 32V and max output current of 1A. Ideal for automotive applications, it operates b/w -40 to 150°C, featuring a buck switcher config and PWM control mode at up to 2200kHz frequency.
CC2662R1FTWRGZRQ1
CC2662R1FTWRGZRQ1 by Texas Instruments is a 32-bit microcontroller with Cortex-M4F CPU, 48 MHz clock frequency, and 81920 bytes of RAM. Ideal for industrial applications, it features 8 ADC channels, 32 DMA channels, and peripherals like AES and PWM for efficient system integration.
DRV8316RRGFR
DRV8316RRGFR by Texas Instruments is a motion control IC with a rectangular package and a terminal form of gull wing. It has a max output current of 8A and can operate at temperatures ranging from -40 to 125°C. This IC is commonly used as a brushless DC motor controller in automotive applications.
DRV3255EPAPRQ1
DRV3255EPAPRQ1 by Texas Instruments is a Motion Control IC with 64 terminals, operating at -40 to 150°C. It is an AEC-Q100 compliant automotive-grade IC for Brushless DC Motor control, supporting supply voltages from 5V to 90V and output currents up to 3.5A. The package style includes a flatpack with heat sink/slug, suitable for surface mount applications in automotive systems.
DS160PT801ACBR
DS160PT801ACBR by Texas Instruments is a bus controller IC with 339 terminals, operating at -40 to 85°C. It supports PCI bus compatibility with a data transfer rate of 2000 MBps. This CMOS technology device has a thin profile and fine pitch package suitable for industrial applications.
REF5025AIDGKR
REF5025AIDGKR by Texas Instruments is a voltage reference with an output voltage range of 2.4975V to 2.5025V, suitable for automotive applications. It features a small outline package style, dual terminal position, and a max operating temperature of 125°C. This three-terminal device has a voltage tolerance of 0.1% and operates within a supply voltage range of 2.7V to 18V.
REF5025AIDRG4
REF5025AIDRG4 by Texas Instruments is a voltage reference with an output voltage range of 2.4975V to 2.5025V, suitable for automotive applications. It operates in temperatures from -40°C to 125°C and has a max supply voltage of 18V, making it ideal for various electronic systems requiring precise voltage regulation in compact designs.
REF5025AIDR
REF5025AIDR by Texas Instruments is a voltage reference with a min output voltage of 2.4975 V and max output voltage of 2.5025 V. It is commonly used in automotive applications due to its temperature grade and moisture sensitivity level.
REF5030AIDR
REF5030AIDR by Texas Instruments is a voltage reference IC with output voltage range of 2.997-3.003V, operating temperature -40 to 125°C, and voltage tolerance of 0.1%. Widely used in automotive applications due to its small outline package and nickel palladium gold terminal finish.
REF5030AIDGKT
REF5030AIDGKT by Texas Instruments is a voltage reference with an output voltage range of 2.997V to 3.003V, suitable for automotive applications. It features a small outline package style, surface mount capability, and a max operating temperature of 125°C. Ideal for precision voltage regulation in compact electronic designs.
REF5025IDRG4
REF5025IDRG4 by Texas Instruments is a voltage reference with an output voltage range of 2.4975V to 2.5025V, suitable for automotive applications. It features a small outline package style, adjustable output trim, and operates in temperatures ranging from -40°C to 125°C. Ideal for precision voltage regulation in automotive electronics.
REF5025IDGKR
REF5025IDGKR by Texas Instruments is a voltage reference with a nominal output of 2.5V, operating from -40 to 125°C. It features an adjustable output, small outline package style, and automotive temperature grade suitability. Ideal for applications requiring precise voltage regulation in compact designs.
REF5025IDR
REF5025IDR by Texas Instruments is a voltage reference with an output voltage range of 2.4975V to 2.5025V, suitable for automotive applications. It features a small outline package style, dual terminal position, and a max operating temperature of 125°C. This three-terminal reference has a voltage tolerance of 0.1% and operates at supply voltages b/w 2.7V to 18V.
REF5025IDGKT
REF5025IDGKT by Texas Instruments is a voltage reference with an output voltage range of 2.4975V to 2.5025V, suitable for automotive applications. It features a small outline package style, surface mount capability, and a max operating temperature of 125°C. With a min supply voltage of 2.7V and low voltage tolerance of 0.1%, it is ideal for precision electronic systems requiring stable voltage references.
REF5025AIDGKT
REF5025AIDGKT by Texas Instruments is a voltage reference IC with an output voltage range of 2.4975V to 2.5025V, suitable for automotive applications. It features a small outline package with dual terminals and a max operating temperature of 125°C, making it ideal for precision voltage regulation in compact electronic designs. The device offers a max voltage tolerance of 0.1% and low temperature coefficient of 3 ppm/°C, ensuring stable performance across varying environmental conditions.
REF5030AIDRG4
REF5030AIDRG4 by Texas Instruments is a voltage reference with a min output voltage of 2.997 V and a max output voltage of 3.003 V. It is commonly used in automotive applications due to its temperature grade and moisture sensitivity level.
REF5030AIDGKR
REF5030AIDGKR by Texas Instruments is a voltage reference IC with an output voltage range of 2.997V to 3.003V, suitable for automotive applications. It features a small outline package style, adjustable output, and operates in temperatures ranging from -40°C to 125°C. This three-terminal device has a max supply voltage of 18V and low voltage tolerance of 0.1%.
REF5025ID
REF5025ID by Texas Instruments is a voltage reference with an output voltage range of 2.4975V to 2.5025V, suitable for automotive applications. It features a small outline package style, surface mount capability, and a max operating temperature of 125°C.
REF5050IDGKR
REF5050IDGKR by Texas Instruments is a voltage reference with an output voltage range of 4.995V to 5.005V, suitable for automotive applications. It has a small outline package style, dual terminal position, and operates in temperatures ranging from -40°C to 125°C. With a max supply voltage of 18V and low voltage tolerance of 0.1%, it is ideal for precision voltage regulation in various electronic systems.
REF5050AIDGKR
REF5050AIDGKR by Texas Instruments is a voltage reference with an output voltage range of 4.995V to 5.005V, suitable for automotive applications. It operates in temperatures from -40°C to 125°C and has a max voltage tolerance of 0.1%. This three-terminal reference IC is surface mountable and features a small outline package style.
REF5050AIDGKT
REF5050AIDGKT by Texas Instruments is a voltage reference with adjustable output (4.995-5.005V) and 3ppm/°C max voltage temp coef. It is used in automotive applications, has a small outline package style, and operates b/w -40 to 125 °C.
REF5050AID
REF5050AID by Texas Instruments is a voltage reference with an output range of 4.995V to 5.005V, suitable for automotive applications. It has a max operating temperature of 125°C and a voltage tolerance of 0.1%. This small outline IC features adjustable output and is surface mountable, making it ideal for various electronic designs.
REF5025IDG4
REF5025IDG4 by Texas Instruments is a voltage reference with a min output voltage of 2.4975 V and max output voltage of 2.5025 V. It is commonly used in automotive applications due to its temperature grade and moisture sensitivity level.
REF5050AIDRG4
REF5050AIDRG4 by Texas Instruments is a voltage reference with output voltage range of 4.995V to 5.005V, suitable for automotive applications. It operates b/w -40°C to 125°C, has a supply voltage range of 2.7V to 18V, and offers high precision with a max voltage tolerance of 0.1%.
REF5050AIDR
REF5050AIDR by Texas Instruments is a voltage reference with a nominal output of 5V, adjustable from 4.995V to 5.005V. It operates in automotive-grade temperatures (-40 to 125°C) and has a max voltage tolerance of 0.1%. This three-terminal IC is ideal for precision voltage regulation in automotive applications.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved