Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
REF5040IDGKR by Texas Instruments is a voltage reference with adjustable output (4.0919-4.1V) in a small outline package suitable for automotive applications. It operates b/w -40 to 125°C, has a max voltage tolerance of 0.1%, and requires a supply voltage of 2.7-18V for optimal performance.
Median Price
$7.580
Lifecycle Status
Suppliers In-Stock
7
In-Stock Inventory
1k+
Texas Instruments
1+ parts
$5.246
100+ parts
$4.277
1k+ parts
$2.851
10k+ parts
-
DigiKey
$4.957
$4.484
$4.366
Mouser Electronics
$4.960
$4.490
$4.360
Nova Conductors
Digiode
$4.984
Chip Stock
Vyrian
Continental Prestige Electronics
$2.794
Argo Parts USA
Advanced Electronics
$2.908
Ampacity Inc.
$4.460
Semicontronic
$4.348
$4.326
Corphita
$4.721
Parana Technologies
$10.205
$10.741
DigiPath Technology Company
$11.237
$10.338
ChromeModa Solutions
$11.466
$9.402
IDEA Electronic Components Group
$10.893
$10.319
Corohmni
$12.501
AZTECH Wire
$15.280
A-Z Elektronik GmbH
Kepictronics
Alle Elektronik GmbH
GreenTree Electronics
Perfect Parts
Bastille Electronics
This material provides durability and protection for the voltage reference, making it suitable for various environments and applications.
The surface mount capability allows for easy and convenient installation on circuit boards, saving time and effort during production.
The adjustable output voltage feature offers flexibility in setting the desired voltage level, making it versatile for different circuit requirements.
The square shape of the package allows for efficient use of space on the circuit board, maximizing the layout design.
This terminal finish provides excellent conductivity and resistance to corrosion, ensuring reliable performance over time.
The low minimum supply voltage requirement enables the voltage reference to operate effectively in power-constrained applications.
The automotive temperature grade indicates that the voltage reference is designed to withstand the harsh conditions typically found in automotive environments.
With a low voltage tolerance, this voltage reference provides accurate and stable output voltage, ensuring precision in the circuit operation.
Voltage References REF5040IDGKR attributes and parameters. Explore more Voltage References devices from Texas Instruments
Other IC type:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Outputs:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Maximum Output Voltage:
Minimum Output Voltage:
Nominal Output Voltage:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Qualification:
Maximum Seated Height:
Maximum Supply Voltage (Vsup):
Minimum Supply Voltage (Vsup):
Surface Mount:
Max Voltage Temp Coef:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Trim or Adjustable Output (V):
Maximum Voltage Tolerance:
Width (mm):
REF5040IDGKR Other Function Semiconductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Design/Specification - REF50xx Datasheet 21/Jun/2023 REF50yyy 08/Jun/2020
Texas Instruments Inc. (TI) is one of the world's leading semiconductor companies and a global leader in analog and digital signal processing technology. The company has had a major impact on the electronics industry for over 80 years, manufacturing integrated circuits (ICs), software and subsystems that leverage high-performance computing capabilities. It offers an extensive portfolio of solutions for a wide range of industries, from aerospace to medical devices and consumer products to communication systems. Over its long history, TI has become synonymous with quality, reliability and innovation. Today, TI is one of the largest semiconductor companies in the world with operations in more than 30 countries across six continents.
President, CEO
Haviv Ilan
Chairman
Richard K. Templeton
Senior VP, CFO
Rafael R. Lizardi
M - Fab
Fabrication
Fab Initiation
1997
USA
South Portland
Wafer Capacity
32,000
D - FAB
1966
Dallas
42,000
D MOS - 6
2002
25,000
D MOS - 5
1995
75,000
Miho - 8
1980
Japan
Inashiki
43,000
S FAB 1
Sherman
91,000
F - FAB
2001
Germany
Freising
37,000
R Fab 1
2010
Richardson
40,000
D HC Line
1999
2,000
JV3
Aizu Wakamatsu
45,000
C - FAB
2007
China
Chengdu
30,000
L - Fab
2015
Lehi
70,000
R - Fab 2
2022
S - FAB 2
2025
S - FAB 3
2028
EEAGA1H4R7
Panasonic
Panasonic EEAGA1H4R7 is a 4.7uF, 50V Aluminum Electrolytic Capacitor with 0.1 Tan Delta and 0.003mA Leakage Current. Ideal for applications requiring high ripple current handling in temperatures ranging from -55 to 105°C.
SMBJ18CA
Sangdest Microelectronics (Nanjing)
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FT232RQ-REEL
FTDI
FTDI's FT232RQ-REEL is a USB bus controller with 32 terminals, operating at 3.3-5.25V. It supports data transfer rates up to 60MBps and clock frequency of 12.02MHz, suitable for RS232/RS422/RS485 interfaces in various applications like industrial automation and communication systems.
1N4148
1N4148 by Texas Instruments is a rectifier diode with max reverse recovery time of 0.004 us and max forward voltage of 1V. Ideal for applications requiring low reverse current such as signal demodulation circuits. Operates at max temp of 200°C, making it suitable for high-temperature environments.
BSS138
Sipex
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Moisture Sensitivity Level (MSL): 1; Peak Reflow Temperature (C): 240;
1N4148WT
Tak Cheong Electronics Holdings
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Onsemi
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Terminal Finish: Matte Tin (Sn) - annealed;
LM317LMX/NOPB
LM317LMX/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max input-output voltage differential of 40V. It operates in temperatures ranging from -40°C to 125°C and has a max output current of 0.1A, making it suitable for various applications requiring precise voltage regulation.
FSMLF327
Fox Electronics
FSMLF327 by Fox Electronics is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing such as communication systems, industrial automation, and consumer electronics. Operating temperature range from -40 to 85 °C.
ULN2803A
Motorola
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Terminal Position: DUAL; JESD-30 Code: R-PDIP-T18;
1554216002
Molex
WIRE AND CABLE;
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
MMBF170LT1G
MMBF170LT1G by Onsemi is a N-CHANNEL FET with 60V DS Breakdown Voltage and 0.5A Drain Current. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE with a max power dissipation of 0.225W. This small outline transistor has a temperature range from -55 to 150 °C.
ERJU06F10R0V
ERJU06F10R0V by Panasonic is an 0805 size SMT fixed resistor with a resistance of 10 ohm and 1% tolerance. It operates b/w -55 to 155 °C, suitable for AEC-Q200 standards in automotive applications due to its high temperature coefficient of 100 ppm/°C. With a max operating voltage of 150 V and power dissipation of 0.125 W, it is ideal for surface mounting type.
Itt Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Vishay Intertechnology
Brightking
General Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Minimum DS Breakdown Voltage: 50 V; Qualification: Not Qualified;
International Components
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Terminal Finish: Tin/Lead (Sn/Pb); JESD-609 Code: e0; Maximum Reverse Recovery Time: .004 us;
Yageo
REF5025SHKQ
REF5025SHKQ by Texas Instruments is a voltage reference with an output of 2.5V, operating from -55 to 210°C. It features a small outline package, gold terminal finish, and trimmable output voltage. Ideal for military-grade applications requiring precise voltage references in compact spaces.
LT1461AIS8-4#PBF
Linear Technology
THREE TERMINAL VOLTAGE REFERENCE; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
ADR4533BRZ-R7
Analog Devices
ADR4533BRZ-R7 by Analog Devices is a voltage reference IC with 3.3V output, 0.01A max current, and 0.02% voltage tolerance. Ideal for automotive applications, it operates b/w -40 to 125°C with a supply voltage range of 3.4V to 15V in a small outline package suitable for surface mount assembly.
LM285M-1.2/NOPB
National Semiconductor
TWO TERMINAL VOLTAGE REFERENCE; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
REF3130AIDBZT
REF3130AIDBZT by Texas Instruments is a 3-terminal voltage reference with nominal output voltage of 3V. It operates in automotive temperature grade range (-40 to 125°C) and has a max supply voltage of 5.5V. With a small outline package style, it's ideal for precision voltage reference applications in compact electronic designs.
LM431ACM3/NOPB
LM431ACM3/NOPB by Texas Instruments is a voltage reference IC with a trimmable or adjustable output voltage range of 2.44V to 2.55V. It is a small outline, thin profile package with a max output current of 0.1A, making it suitable for various industrial applications requiring precise voltage references.
AD584TH
AD584TH by Analog Devices is a voltage reference with trimmable 10V output, operating from -55 to 125°C. It features ±0.14% max voltage tolerance and 15 ppm/°C temp coef, suitable for military-grade applications requiring precise voltage references in a cylindrical package.
TL431QDBZR,215
NXP Semiconductors
NXP Semiconductors' TL431QDBZR,215 is a voltage reference IC with adjustable output (2.44-2.55V) in a small outline package suitable for automotive applications. It operates b/w -40 to 125°C, has a max output current of 0.1A, and can handle up to 36V supply voltage.
LM285MX-1.2/NOPB
TL431ACDR2G
TL431ACDR2G by Onsemi is a voltage reference IC with adjustable output (V) from 2.453 V to 2.537 V. It operates in temperatures ranging from 0°C to 70°C, making it suitable for various commercial applications requiring precise voltage regulation in a compact small outline package style.
REF3325AIDBZR
REF3325AIDBZR by Texas Instruments is a 3-terminal voltage reference with a nominal output of 2.5V and voltage tolerance of 0.15%. Operating temperature ranges from -40 to 125 °C, making it suitable for automotive applications. This small outline, thin profile package is surface mountable and has a terminal pitch of 1.9mm.
LM431ACM3X
LM431ACM3X by Texas Instruments is a voltage reference with adjustable output (2.44-2.55V) and max current of 0.1A. Ideal for industrial applications, it operates b/w -40 to 85°C, in a small outline package suitable for surface mount technology.
REF3330AIDBZRG4
REF3330AIDBZRG4 by Texas Instruments is a 3-terminal voltage reference with a nominal output of 3V. It operates b/w -40 to 125°C, with a max supply voltage of 5.5V and voltage tolerance of 0.15%. Ideal for automotive applications due to its small size, low temp coefficient, and high precision.
LMV431AIMF/NOPB
LMV431AIMF/NOPB by Texas Instruments is a voltage reference IC with adjustable output (1.228-1.252V) and 3 terminals in a small outline package. It operates b/w -40 to 85°C, suitable for industrial applications requiring precise voltage regulation in compact designs.
MCP1501T-20E/CHYVAO
Microchip Technology
MCP1501T-20E/CHYVAO by Microchip: Voltage Ref. with 2.046-2.05V output, 50 ppm/°C temp coef., AEC-Q100 screening for automotive apps. Small outline, low profile package with 6 terminals, suitable for tight spaces in automotive electronics. Operating range -40 to 125 °C, ideal for precision voltage reference needs.
REF3030AIDBZT
REF3030AIDBZT by Texas Instruments is a 3-terminal voltage reference with nominal output voltage of 3V. It operates in automotive temperature grade range from -40 to 125°C, offering a max voltage tolerance of 0.2%. With a small outline and thin profile package style, it's ideal for applications requiring precise voltage references in compact spaces.
TL431ACD
TL431ACD by Texas Instruments is a voltage reference IC with adjustable output (2.47-2.52V) and 1% voltage tolerance. It's a small outline package suitable for various applications like power supplies, battery chargers, and LED drivers due to its 100mA max output current and commercial temperature grade.
TL431IDBZTG4
TL431IDBZTG4 by Texas Instruments is a voltage reference IC with adjustable output (2.44-2.55V). It operates in industrial temperature range (-40 to 85°C) and has a max output current of 0.1A. Widely used for precision voltage regulation in various electronic applications.
REF5025AIDGKR
REF5025AIDGKR by Texas Instruments is a voltage reference with an output voltage range of 2.4975V to 2.5025V, suitable for automotive applications. It features a small outline package style, dual terminal position, and a max operating temperature of 125°C. This three-terminal device has a voltage tolerance of 0.1% and operates within a supply voltage range of 2.7V to 18V.
LM336Z-2.5X
LM336Z-2.5X by National Semiconductor is a 3-terminal voltage reference with adjustable output (2.39-2.59V). Operating from 0 to 70°C, it has a max supply current of 10mA and temp coef of 54 ppm/°C. Ideal for precision applications requiring stable voltage references in commercial-grade environments.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
DRV8316RRGFR
DRV8316RRGFR by Texas Instruments is a motion control IC with a rectangular package and a terminal form of gull wing. It has a max output current of 8A and can operate at temperatures ranging from -40 to 125°C. This IC is commonly used as a brushless DC motor controller in automotive applications.
LMR43610MSC3RPERQ1
LMR43610MSC3RPERQ1 by Texas Instruments is a 9-terminal switching regulator with a max output voltage of 32V and max output current of 1A. Ideal for automotive applications, it operates b/w -40 to 150°C, featuring a buck switcher config and PWM control mode at up to 2200kHz frequency.
DRV3255EPAPRQ1
DRV3255EPAPRQ1 by Texas Instruments is a Motion Control IC with 64 terminals, operating at -40 to 150°C. It is an AEC-Q100 compliant automotive-grade IC for Brushless DC Motor control, supporting supply voltages from 5V to 90V and output currents up to 3.5A. The package style includes a flatpack with heat sink/slug, suitable for surface mount applications in automotive systems.
UCC27284DRCR
UCC27284DRCR by Texas Instruments is a MOSFET gate driver with 2 channels, capable of handling a max output current of 3.5A. It operates in automotive-grade temperatures (-40 to 125°C) and has a turn-on/off time of 30µs. This chip carrier package with very thin profile is suitable for high side driver applications requiring fast switching speeds.
TPS7A4301DGQR
TPS7A4301DGQR by Texas Instruments is an adjustable positive single output LDO regulator with a max output voltage of 14.5V and a dropout voltage of 0.6V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
CC2662R1FTWRGZRQ1
CC2662R1FTWRGZRQ1 by Texas Instruments is a 32-bit microcontroller with Cortex-M4F CPU, 48 MHz clock frequency, and 81920 bytes of RAM. Ideal for industrial applications, it features 8 ADC channels, 32 DMA channels, and peripherals like AES and PWM for efficient system integration.
DS160PT801ACBR
DS160PT801ACBR by Texas Instruments is a bus controller IC with 339 terminals, operating at -40 to 85°C. It supports PCI bus compatibility with a data transfer rate of 2000 MBps. This CMOS technology device has a thin profile and fine pitch package suitable for industrial applications.
REF5025AIDRG4
REF5025AIDRG4 by Texas Instruments is a voltage reference with an output voltage range of 2.4975V to 2.5025V, suitable for automotive applications. It operates in temperatures from -40°C to 125°C and has a max supply voltage of 18V, making it ideal for various electronic systems requiring precise voltage regulation in compact designs.
REF5025AIDR
REF5025AIDR by Texas Instruments is a voltage reference with a min output voltage of 2.4975 V and max output voltage of 2.5025 V. It is commonly used in automotive applications due to its temperature grade and moisture sensitivity level.
REF5030AIDR
REF5030AIDR by Texas Instruments is a voltage reference IC with output voltage range of 2.997-3.003V, operating temperature -40 to 125°C, and voltage tolerance of 0.1%. Widely used in automotive applications due to its small outline package and nickel palladium gold terminal finish.
REF5030AIDGKT
REF5030AIDGKT by Texas Instruments is a voltage reference with an output voltage range of 2.997V to 3.003V, suitable for automotive applications. It features a small outline package style, surface mount capability, and a max operating temperature of 125°C. Ideal for precision voltage regulation in compact electronic designs.
REF5025IDRG4
REF5025IDRG4 by Texas Instruments is a voltage reference with an output voltage range of 2.4975V to 2.5025V, suitable for automotive applications. It features a small outline package style, adjustable output trim, and operates in temperatures ranging from -40°C to 125°C. Ideal for precision voltage regulation in automotive electronics.
REF5025IDGKR
REF5025IDGKR by Texas Instruments is a voltage reference with a nominal output of 2.5V, operating from -40 to 125°C. It features an adjustable output, small outline package style, and automotive temperature grade suitability. Ideal for applications requiring precise voltage regulation in compact designs.
REF5025IDR
REF5025IDR by Texas Instruments is a voltage reference with an output voltage range of 2.4975V to 2.5025V, suitable for automotive applications. It features a small outline package style, dual terminal position, and a max operating temperature of 125°C. This three-terminal reference has a voltage tolerance of 0.1% and operates at supply voltages b/w 2.7V to 18V.
REF5025IDGKT
REF5025IDGKT by Texas Instruments is a voltage reference with an output voltage range of 2.4975V to 2.5025V, suitable for automotive applications. It features a small outline package style, surface mount capability, and a max operating temperature of 125°C. With a min supply voltage of 2.7V and low voltage tolerance of 0.1%, it is ideal for precision electronic systems requiring stable voltage references.
REF5025AIDGKT
REF5025AIDGKT by Texas Instruments is a voltage reference IC with an output voltage range of 2.4975V to 2.5025V, suitable for automotive applications. It features a small outline package with dual terminals and a max operating temperature of 125°C, making it ideal for precision voltage regulation in compact electronic designs. The device offers a max voltage tolerance of 0.1% and low temperature coefficient of 3 ppm/°C, ensuring stable performance across varying environmental conditions.
REF5030AIDRG4
REF5030AIDRG4 by Texas Instruments is a voltage reference with a min output voltage of 2.997 V and a max output voltage of 3.003 V. It is commonly used in automotive applications due to its temperature grade and moisture sensitivity level.
REF5030AIDGKR
REF5030AIDGKR by Texas Instruments is a voltage reference IC with an output voltage range of 2.997V to 3.003V, suitable for automotive applications. It features a small outline package style, adjustable output, and operates in temperatures ranging from -40°C to 125°C. This three-terminal device has a max supply voltage of 18V and low voltage tolerance of 0.1%.
REF5025ID
REF5025ID by Texas Instruments is a voltage reference with an output voltage range of 2.4975V to 2.5025V, suitable for automotive applications. It features a small outline package style, surface mount capability, and a max operating temperature of 125°C.
REF5050IDGKR
REF5050IDGKR by Texas Instruments is a voltage reference with an output voltage range of 4.995V to 5.005V, suitable for automotive applications. It has a small outline package style, dual terminal position, and operates in temperatures ranging from -40°C to 125°C. With a max supply voltage of 18V and low voltage tolerance of 0.1%, it is ideal for precision voltage regulation in various electronic systems.
REF5050AIDGKR
REF5050AIDGKR by Texas Instruments is a voltage reference with an output voltage range of 4.995V to 5.005V, suitable for automotive applications. It operates in temperatures from -40°C to 125°C and has a max voltage tolerance of 0.1%. This three-terminal reference IC is surface mountable and features a small outline package style.
REF5050AIDGKT
REF5050AIDGKT by Texas Instruments is a voltage reference with adjustable output (4.995-5.005V) and 3ppm/°C max voltage temp coef. It is used in automotive applications, has a small outline package style, and operates b/w -40 to 125 °C.
REF5050AID
REF5050AID by Texas Instruments is a voltage reference with an output range of 4.995V to 5.005V, suitable for automotive applications. It has a max operating temperature of 125°C and a voltage tolerance of 0.1%. This small outline IC features adjustable output and is surface mountable, making it ideal for various electronic designs.
REF5025IDG4
REF5025IDG4 by Texas Instruments is a voltage reference with a min output voltage of 2.4975 V and max output voltage of 2.5025 V. It is commonly used in automotive applications due to its temperature grade and moisture sensitivity level.
REF5050AIDRG4
REF5050AIDRG4 by Texas Instruments is a voltage reference with output voltage range of 4.995V to 5.005V, suitable for automotive applications. It operates b/w -40°C to 125°C, has a supply voltage range of 2.7V to 18V, and offers high precision with a max voltage tolerance of 0.1%.
REF5050AIDR
REF5050AIDR by Texas Instruments is a voltage reference with a nominal output of 5V, adjustable from 4.995V to 5.005V. It operates in automotive-grade temperatures (-40 to 125°C) and has a max voltage tolerance of 0.1%. This three-terminal IC is ideal for precision voltage regulation in automotive applications.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved