Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
PCM1802DBG4 by Texas Instruments is a 24-bit ADC with 2 analog input channels. It operates at temperatures ranging from -40 to 85°C and has a sample rate of 0.096 MHz. This converter is commonly used in industrial applications requiring high-resolution audio conversion.
Median Price
$3.140
Lifecycle Status
Suppliers In-Stock
6
In-Stock Inventory
1k+
Farnell
1+ parts
100+ parts
-
1k+ parts
10k+ parts
Element14
$6.100
$3.820
Rochester
$2.530
$2.260
$2.130
Digiode
$2.660
Nova Conductors
$3.170
Vyrian
Ampacity Inc.
$2.380
Semicontronic
$2.320
$2.309
Corphita
$2.520
Continental Prestige Electronics
Argo Parts USA
Parana Technologies
$6.241
$7.000
DigiPath Technology Company
$6.872
ChromeModa Solutions
$7.012
$5.750
IDEA Electronic Components Group
$6.311
AZTECH Wire
$8.956
Corohmni
$19.514
Microchip USA
Netroflash
$3.107
$3.012
$2.948
Lightweight and durable material, ideal for portable or rugged applications.
Allows for simultaneous conversion of two analog signals, increasing efficiency.
Saves space on PCB and enables automated assembly, reducing production costs.
High resolution for accurate conversion of analog signals into digital data.
Compatible with common power sources, offering flexibility in application.
Suitable for industrial environments with higher temperature requirements.
Low power consumption and high noise immunity, enhancing overall performance.
Allows for easy interfacing with microcontrollers and digital systems.
Analog-to-Digital Converters PCM1802DBG4 attributes and parameters. Explore more Analog-to-Digital Converters devices from Texas Instruments
Converter Type:
No. of Analog In Channels:
No. of Functions:
No. of Bits:
Sub-Category:
Output Bit Code:
Output Format:
Sample Rate:
Hold Mode:
Power Supplies:
Minimum Analog Input Voltage:
Maximum Analog Input Voltage:
Nominal Supply Voltage:
Maximum Supply Current:
Moisture Sensitivity Level (MSL):
Minimum Operating Temperature:
Maximum Operating Temperature:
Temperature Grade:
Peak Reflow Temperature:
Maximum Time At Peak Reflow Temperature:
Terminal Position:
No. of Terminals:
Terminal Form:
Terminal Pitch:
Surface Mount:
Width:
Length:
Maximum Seated Height:
Package Body Material:
Package Style:
Package Shape:
Package Equivalence Code:
Package Code:
JESD-30 Code:
Qualified:
JESD-609 Code:
PCM1802DBG4 Converters trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Assembly/Origin - TSMC-WF9 Wafer Fab Site Retraction 10/Sep/2013
Texas Instruments Inc. (TI) is one of the world's leading semiconductor companies and a global leader in analog and digital signal processing technology. The company has had a major impact on the electronics industry for over 80 years, manufacturing integrated circuits (ICs), software and subsystems that leverage high-performance computing capabilities. It offers an extensive portfolio of solutions for a wide range of industries, from aerospace to medical devices and consumer products to communication systems. Over its long history, TI has become synonymous with quality, reliability and innovation. Today, TI is one of the largest semiconductor companies in the world with operations in more than 30 countries across six continents.
President, CEO
Haviv Ilan
Chairman
Richard K. Templeton
Senior VP, CFO
Rafael R. Lizardi
M - Fab
Fabrication
Fab Initiation
1997
USA
South Portland
Wafer Capacity
32,000
D - FAB
1966
Dallas
42,000
D MOS - 6
2002
25,000
D MOS - 5
1995
75,000
Miho - 8
1980
Japan
Inashiki
43,000
S FAB 1
Sherman
91,000
F - FAB
2001
Germany
Freising
37,000
R Fab 1
2010
Richardson
40,000
D HC Line
1999
2,000
JV3
Aizu Wakamatsu
45,000
C - FAB
2007
China
Chengdu
30,000
L - Fab
2015
Lehi
70,000
R - Fab 2
2022
S - FAB 2
2025
S - FAB 3
2028
BAV99
Infineon Technologies
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM555CN
Rca Solid State
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
SS14
Meritek Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MBRM140T1G
Onsemi
MBRM140T1G by Onsemi is a Schottky rectifier diode with 40V max repetitive peak reverse voltage, 1A max output current, and 0.3V max forward voltage. It is used in applications requiring small outline surface mount diodes for efficient power management.
MBRS3200T3G
MBRS3200T3G by Onsemi is a Schottky rectifier diode with a max output current of 3A and a max forward voltage of 0.59V. It operates in temperatures ranging from -65°C to 175°C, making it suitable for power applications. The diode has a peak repetitive reverse voltage of 200V and is designed for surface mount installation in electronic circuits.
M24308/2-1F
TE Connectivity
TE Connectivity's M24308/2-1F D-Sub Connector features 9 contacts, 2 rows, and a shell size of 1/E. With a rated current of 7.5A, it operates b/w -55°C to 125°C. Ideal for cable mounting applications, this connector has a steel shell with cadmium finish and uses crimp termination for female contact pins.
BSS138
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3 ohm; Minimum DS Breakdown Voltage: 50 V; Terminal Form: GULL WING;
STM32H743BIT6
STMicroelectronics
STM32H743BIT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, 208 terminals, and 1085440 bytes of RAM. It features 2 DAC channels, 32 ADC channels, and operates at a max clock frequency of 48 MHz. Ideal for industrial applications requiring high-speed processing and extensive peripheral connectivity.
TM4C1294NCPDTI3
Texas Instruments
TM4C1294NCPDTI3 by Texas Instruments is a 32-bit microcontroller with Cortex-M4F CPU family. It features 8KB data EEPROM, 20-Ch 12-Bit ADC channels, and 32 DMA channels. Ideal for industrial applications requiring high-speed processing, it offers connectivity options like CAN, Ethernet, I2C, SPI, UART, and USB.
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
LL4148
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BSS138NH6327XTSA2
BSS138NH6327XTSA2 by Infineon is a N-CHANNEL FET with 60V DS Breakdown Voltage, ideal for small signal applications. Operating in Enhancement Mode, it has 0.36W Power Dissipation and 3.5 ohm Drain-Source Resistance. With Gull Wing terminals and AEC-Q101 reference standard, it's suitable for automotive electronics due to its high temperature range of -55 to 150 °C.
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
LAN8720AI-CP-TR
Microchip Technology
LAN8720AI-CP-TR by Microchip is an Ethernet transceiver with 100 Mbps data rate, operating at -40 to 85 °C. It features a 3.3 V supply voltage, 54 mA supply current, and TS 16949 screening level. Ideal for network interfaces in industrial applications due to its compact square package and low profile design.
Amphenol
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body or Shell Style: RECEPTACLE; Body Length: 1.228 inch; No. of Rows Loaded: 2;
SMBJ18CA
Yageo
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Aeroflex/metelics
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Package Shape: ROUND; Transistor Application: SWITCHING;
Bourns
USBLC6-2SC6
USBLC6-2SC6 by STMicroelectronics is a unidirectional transient voltage suppressor diode with a breakdown voltage of 6V. It has a max clamping voltage of 17V and operates in temperatures ranging from -40 to 125°C. This device, with dual terminals and matte tin finish, is ideal for protecting sensitive electronics from voltage spikes in various applications.
LM358DT
LM358DT by STMicroelectronics is a dual operational amplifier with a max input offset voltage of 9000 uV. It operates at a nominal voltage of 5V and has a min voltage gain of 25000. This amplifier is commonly used in applications requiring high precision and low power consumption.
ADC124S021CIMM/NOPB
National Semiconductor
A/D CONVERTER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 10; Package Code: TSSOP; Package Shape: RECTANGULAR;
ADS7828E/2K5
Texas Instruments ADS7828E/2K5 ADC features 12-bit resolution, 8 analog inputs, and 0.05 MHz sample rate. Ideal for industrial applications, it operates at -40 to 85°C with a supply voltage of 2.7-5V. Package style is small outline with thin profile and shrink pitch.
LTC1865IMS#PBF
Linear Technology
ADC, SUCCESSIVE APPROXIMATION; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 10; Package Code: TSSOP; Package Shape: SQUARE;
ADS1675IPAGR
The Texas Instruments ADS1675IPAGR is a 24-bit ADC with 0.0015% EL, 4 MHz sample rate, and 3.5V max analog input voltage. Ideal for industrial applications requiring high precision data conversion in a compact square package with GULL WING terminals.
LTC1857CG#PBF
ADC, PROPRIETARY METHOD; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 28; Package Code: SSOP; Package Shape: RECTANGULAR;
ADS1018QDGSRQ1
ADS1018QDGSRQ1 by Texas Instruments is a 12-bit ADC with 4 analog input channels, operating from -40 to 125°C. It features a max linearity error of 0.0122%, suitable for automotive applications. With a sample rate of 0.0033 MHz and output in serial format, it is ideal for compact designs requiring precise analog-to-digital conversion.
MCP3208T-CI/SL
MCP3208T-CI/SL by Microchip Tech is a 12-bit ADC with 8 analog in channels, 0.0488% max linearity error, and 0-5V analog input voltage range. Ideal for industrial applications requiring high-speed conversion (0.1MHz) and small outline package style (9.9mm x 3.9mm).
MAX11254ATJ+
Maxim Integrated
ADC, DELTA-SIGMA; Temperature Grade: AUTOMOTIVE; Terminal Form: NO LEAD; No. of Terminals: 32; Package Code: HVQCCN; Package Shape: SQUARE;
ICL7107CPL
Thomson Consumer Electronics
ADC, PROPRIETARY METHOD; Nominal Negative Supply Voltage: -5 V; Minimum Operating Temperature: 0 Cel; Maximum Operating Temperature: 70 Cel; No. of Functions: 1; Maximum Supply Current: 1.8 mA;
MCP3550-50E/MS
MCP3550-50E/MS by Microchip: 22-bit ADC with 0.0006% linearity error, 2.7/5V power supplies, and 0.0256 MHz sample rate. Ideal for automotive applications due to TS 16949 screening level and -40 to 125°C operating temperature range.
ADS7828E/250G4
ADS7828E/250G4 by Texas Instruments is a 12-bit ADC with 8 analog input channels. It operates at a sample rate of 0.05 MHz and has a max linearity error of 0.0488%. This converter is commonly used in industrial applications requiring precise analog-to-digital conversion.
MCP3564RT-E/ST
MCP3564RT-E/ST by Microchip: 24-bit ADC with 0.0032% EL, 8 analog channels, 0.1536 MHz sample rate. Ideal for automotive applications due to -40 to 125 °C operating range and SERIAL output format.
AD7927BRUZ-REEL
Analog Devices
AD7927BRUZ-REEL by Analog Devices is a 12-bit ADC with 8 analog in channels, 0.0244% linearity error, and 0.8us conversion time. Ideal for industrial applications requiring precise analog-to-digital conversion at temperatures ranging from -40 to 85°C.
ADS8339IDGST
The Texas Instruments ADS8339IDGST is a 16-bit ADC with 0.0031% EL, 0.25 MHz sample rate, and 3.3 us conversion time. Ideal for industrial applications requiring precise analog-to-digital conversion in a compact package with small outline and low power consumption.
LTC2351IUH-14#PBF
LTC2351IUH-14#PBF by Analog Devices is a 14-bit ADC with 6 analog in channels, 0.0183% max linearity error, and 1.5 MHz sample rate. Ideal for industrial applications requiring high precision data conversion at temperatures ranging from -40 to 85°C.
LTC2335ILX-18#PBF
LTC2335ILX-18#PBF by Analog Devices is an 18-bit ADC with 8 analog in channels, 0.0015% EL, and 1 MHz sample rate. Ideal for industrial applications, it offers a max conversion time of 0.55 us and operates b/w -40 to 85 °C.
LTC1867ACGN#PBF
LTC1867ACGN#PBF by Analog Devices is a 16-bit ADC with 8 analog in channels, 0.0038% max linearity error, and 0.2 MHz sample rate. Ideal for applications requiring precise analog-to-digital conversion such as industrial automation and data acquisition systems.
AD7124-4BBCPZ-RL7
AD7124-4BBCPZ-RL7 by Analog Devices is a 24-bit ADC with 4 analog in channels, 0.0015% max linearity error, and operates in automotive temperature grade. It features a serial output format, 3V nominal voltage, and is ideal for precision measurement applications.
LTC2440CGN
LTC2440CGN by Analog Devices is a 24-bit ADC with 0.0015% EL, 0.35 MHz sample rate, and 170000 us conversion time. Ideal for applications requiring high precision analog-to-digital conversion in commercial temperature environments. Package: PLASTIC/EPOXY, Surface Mount: YES, Output Format: SERIAL.
ADS1119IPWR
ADS1119IPWR by Texas Instruments is a 16-bit ADC with 4 analog input channels, operating at a sample rate of 0.001 MHz. It features a max linearity error of 0.0015%, suitable for automotive applications due to its temperature grade and small form factor. The converter type is delta-sigma with a serial output format, making it ideal for precision measurement in compact designs.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LMR43610MSC3RPERQ1
LMR43610MSC3RPERQ1 by Texas Instruments is a 9-terminal switching regulator with a max output voltage of 32V and max output current of 1A. Ideal for automotive applications, it operates b/w -40 to 150°C, featuring a buck switcher config and PWM control mode at up to 2200kHz frequency.
TPS7A4301DGQR
TPS7A4301DGQR by Texas Instruments is an adjustable positive single output LDO regulator with a max output voltage of 14.5V and a dropout voltage of 0.6V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
DS160PT801ACBR
DS160PT801ACBR by Texas Instruments is a bus controller IC with 339 terminals, operating at -40 to 85°C. It supports PCI bus compatibility with a data transfer rate of 2000 MBps. This CMOS technology device has a thin profile and fine pitch package suitable for industrial applications.
CC2662R1FTWRGZRQ1
CC2662R1FTWRGZRQ1 by Texas Instruments is a 32-bit microcontroller with Cortex-M4F CPU, 48 MHz clock frequency, and 81920 bytes of RAM. Ideal for industrial applications, it features 8 ADC channels, 32 DMA channels, and peripherals like AES and PWM for efficient system integration.
DRV3255EPAPRQ1
DRV3255EPAPRQ1 by Texas Instruments is a Motion Control IC with 64 terminals, operating at -40 to 150°C. It is an AEC-Q100 compliant automotive-grade IC for Brushless DC Motor control, supporting supply voltages from 5V to 90V and output currents up to 3.5A. The package style includes a flatpack with heat sink/slug, suitable for surface mount applications in automotive systems.
UCC27284DRCR
UCC27284DRCR by Texas Instruments is a MOSFET gate driver with 2 channels, capable of handling a max output current of 3.5A. It operates in automotive-grade temperatures (-40 to 125°C) and has a turn-on/off time of 30µs. This chip carrier package with very thin profile is suitable for high side driver applications requiring fast switching speeds.
DRV8316RRGFR
DRV8316RRGFR by Texas Instruments is a motion control IC with a rectangular package and a terminal form of gull wing. It has a max output current of 8A and can operate at temperatures ranging from -40 to 125°C. This IC is commonly used as a brushless DC motor controller in automotive applications.
PCM1804DB
PCM1804DB by Texas Instruments is a 24-bit ADC with 2 analog in channels, operating at 0.192 MHz sample rate. It has a supply voltage of 5V and supports serial output format. Ideal for applications requiring precise analog-to-digital conversion in commercial temperature range.
PCM1808PWR
ADC, DELTA-SIGMA; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 14; Package Code: TSSOP; Package Shape: RECTANGULAR;
PCM1808PWRG4
PCM1808PWRG4 by Texas Instruments is a 24-bit ADC with 3.3V/5V supplies, 0.096 MHz sample rate, and 11mA max supply current. Ideal for industrial applications, it offers a serial output format and operates in temperatures ranging from -40 to 85°C.
PCM1804DBR
PCM1804DBR by Texas Instruments is a 24-bit ADC with 2 analog in channels, operating at 3.3-5V. It features a 0.192 MHz sample rate and serial output format, suitable for commercial applications requiring precise analog-to-digital conversion in a compact package.
PCM1802DBR
PCM1802DBR by Texas Instruments is a 24-bit ADC with 2 analog in channels, operating at 3.3-5V. It has a sample rate of 0.096 MHz and outputs data in serial format. Ideal for industrial applications requiring precise analog-to-digital conversion within the -40 to 85°C temperature range.
PCM1808PW
PCM1808PWG4
PCM1863DBTR
PCM1863DBTR by Texas Instruments is a 24-bit ADC with 2 analog in channels, operating b/w -40 to 125°C. It features a 0.048 MHz sample rate, serial output format, and is ideal for automotive applications due to its small outline package style.
PCM1802DBRG4
ADC, DELTA-SIGMA; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 20; Package Code: SSOP; Package Shape: RECTANGULAR;
PCM1802DB
PCM1803ADBR
PCM1803ADBR by Texas Instruments is a 24-bit ADC with 2 analog in channels, operating at temperatures from -40 to 85°C. It has a sample rate of 0.096 MHz and supports supply voltages of 3.3V and 5V. Ideal for industrial applications requiring high-resolution analog-to-digital conversion in compact designs.
PCM1863DBT
PCM1863DBT by Texas Instruments is a 24-bit ADC with 2 analog in channels, operating b/w -40 to 125°C. It features a sample rate of 0.048 MHz and output format is serial. Ideal for automotive applications due to its small outline package style and nickel palladium gold terminal finish.
PCM1807PW
PCM1861DBTR
PCM1861DBTR by Texas Instruments is a 24-bit ADC with 2 analog in channels, operating b/w -40 to 125°C. It features a small outline package suitable for automotive applications. With a sample rate of 0.048 MHz and output format as serial, it's ideal for high-precision data acquisition in compact designs.
PCM1840IRTWR
Texas Instruments' PCM1840IRTWR is a 32-bit ADC with 4 analog in channels, operating from -40 to 125°C. It features a sample rate of 0.192 MHz and max analog input voltage of 3.6V, suitable for automotive applications due to its compact chip carrier package style.
PCM1861DBT
PCM1861DBT by Texas Instruments is a 24-bit ADC with 2 analog in channels. It has a small outline, thin profile package style and operates at temperatures ranging from -40 to 125 °C. This converter is commonly used in automotive applications for its high sample rate and serial output format.
PCM1800E/2K
Burr-Brown Corporation
ADC, DELTA-SIGMA; Temperature Grade: OTHER; Terminal Form: GULL WING; No. of Terminals: 24; Package Code: SSOP; Package Shape: RECTANGULAR;
PCM1804S1IDBRQ1
ADC, DELTA-SIGMA; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 28; Package Code: SSOP; Package Shape: RECTANGULAR;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved