Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
OPA2241UA by Texas Instruments is a dual operational amplifier with low-offset and micropower features. It offers a max input offset voltage of 250uV, nominal unity gain bandwidth of 35kHz, and a max supply current of 0.076mA. Ideal for industrial applications requiring precise signal amplification in compact designs.
Median Price
$6.525
Lifecycle Status
Suppliers In-Stock
21
In-Stock Inventory
1k+
Farnell
1+ parts
$5.600
100+ parts
$3.800
1k+ parts
$3.720
10k+ parts
-
Chip1Stop
$6.320
$3.750
$3.300
$3.140
DigiKey
$6.730
Mouser Electronics
$6.840
$4.780
$4.450
$3.730
Element14
$9.360
$8.430
$7.960
Arrow
$4.156
$3.511
RS (Exports)
Digiode
$2.366
Nova Conductors
$3.796
Chip Stock
Vyrian
Cogito LLC
Digital Electronic Gebert Verwaltungs UG
LIBRA Elektronik GmbH
LWI Electronics Inc
Bristol Electronics
Atlantic Semiconductor
A&K Electronics
Semi Source
Prism Electronics
Classic Components Corporation
Corohmni
$1.919
Corphita
$2.241
Parana Technologies
$2.364
$2.863
DigiPath Technology Company
$2.603
$2.395
ChromeModa Solutions
$2.656
$2.178
IDEA Electronic Components Group
$2.390
Semicontronic
$3.530
$3.442
$3.424
Argo Parts USA
Netroflash
$3.607
$3.531
Advanced Electronics
$4.215
$4.004
Aztec Data Supply Inc.
$4.850
Continental Prestige Electronics
$5.620
$4.580
Microchip USA
$19.260
$18.990
QUARKTWIN TECHNOLOGY LTD
Perfect Parts
Kepictronics
A-Z Elektronik GmbH
Lixinc
Infinite Electronics LLP (Excess)
Metaverse IC Inc.
BidChips
iBuyXS LLC
$14.000
Robosynatics
$0.451
Lucentia Tech
Allen Electronics Distributors
This material is cost-effective, lightweight, and durable, making the product suitable for a wide range of applications.
Low input offset voltage ensures accuracy in signal processing and reduces errors in amplification.
Low bias current reduces power consumption and minimizes errors in signal amplification.
Surface mount design allows for easy installation on PCBs, saving space and facilitating automated assembly.
High common-mode rejection ratio indicates the ability to reject noise and interference in the input signal, leading to cleaner output.
Suitable supply voltage for a wide range of applications, ensuring compatibility and ease of integration.
High supply voltage limit offers flexibility in power supply options and allows for handling higher voltage signals.
High minimum voltage gain ensures signal amplification with minimal distortion, making the product suitable for precision applications.
Wide operating temperature range enables the product to function reliably in various environmental conditions.
Voltage-feedback architecture ensures stability, high bandwidth, and low noise in signal amplification applications.
Operational Amplifiers (Op Amps) OPA2241UA attributes and parameters. Explore more Operational Amplifiers (Op Amps) devices from Texas Instruments
Amplifier Type:
Architecture:
Technology:
Power Supply:
Total Functions:
Sub-Category:
Powered:
Frequency Compensation:
Low-Bias:
Low-Offset:
Micropower:
Wideband:
Programmable Power:
Nominal Unity Gain Bandwidth:
Nominal Common Mode Rejection Ratio (CMRR ):
Minimum Common Mode Rejection Ratio (CMRR ):
Input Offset Voltage Limit:
Minimum Voltage Gain:
Nominal Slew Rate:
Maximum Input Offset Current (IIO):
Peak Bias Current:
Maximum Bias Current (IIB) @25 °C:
Nominal Supply Voltage:
Maximum Supply Voltage:
Lowest Operating Temperature:
Maximum Operating Temperature:
Peak Reflow Temperature:
Reflow Peak Time Limit:
Maximum Supply Current:
Length:
Width:
Maximum Seated Height:
Total Terminals:
Terminal Pitch:
Terminal Position:
Terminal Form:
Terminal Finish:
Package Body Material:
Surface Mount:
Moisture Sensitivity Level (MSL):
Temperature Grade:
Qualified:
JESD-30 Code:
JESD-609 Code:
Packing Method:
Package Code:
Package Shape:
Package Style:
Package Equivalence Code:
OPA2241UA Amplifiers trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.33.00.01
SB
8542.33.00.00
Texas Instruments Inc. (TI) is one of the world's leading semiconductor companies and a global leader in analog and digital signal processing technology. The company has had a major impact on the electronics industry for over 80 years, manufacturing integrated circuits (ICs), software and subsystems that leverage high-performance computing capabilities. It offers an extensive portfolio of solutions for a wide range of industries, from aerospace to medical devices and consumer products to communication systems. Over its long history, TI has become synonymous with quality, reliability and innovation. Today, TI is one of the largest semiconductor companies in the world with operations in more than 30 countries across six continents.
President, CEO
Haviv Ilan
Chairman
Richard K. Templeton
Senior VP, CFO
Rafael R. Lizardi
M - Fab
Fabrication
Fab Initiation
1997
USA
South Portland
Wafer Capacity
32,000
D - FAB
1966
Dallas
42,000
D MOS - 6
2002
25,000
D MOS - 5
1995
75,000
Miho - 8
1980
Japan
Inashiki
43,000
S FAB 1
Sherman
91,000
F - FAB
2001
Germany
Freising
37,000
R Fab 1
2010
Richardson
40,000
D HC Line
1999
2,000
JV3
Aizu Wakamatsu
45,000
C - FAB
2007
China
Chengdu
30,000
L - Fab
2015
Lehi
70,000
R - Fab 2
2022
S - FAB 2
2025
S - FAB 3
2028
BSS138W-7-F
Multicomp Pro
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Transistor Element Material: SILICON; No. of Elements: 1;
BAV99+
BAV99+ by Multicomp Pro is a series connected diode with 0.2A output current and 75V peak reverse voltage. Its 0.006us reverse recovery time makes it ideal for high-speed applications. This small outline rectifier diode is designed for surface mount installation in electronic circuits.
1N4148WS
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Nte Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Transistor Application: SWITCHING; Maximum Drain Current (ID): .115 A; No. of Terminals: 3;
06035C103KAT2A
KYOCERA AVX
06035C103KAT2A by KYOCERA AVX is a SMT ceramic capacitor with 0.01uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and 10% tolerance. Ideal for applications requiring compact surface mount capacitors with stable performance in a wide temperature range.
LL4148
Micronas Semiconductor Holding Ag
RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Output Current: .2 A; Maximum Forward Voltage (VF): 1.2 V;
BSS138
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
LM317T
Texas Instruments
LM317T by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max input-output voltage differential of 40V. Operating temperature ranges from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. With a max output current of 1.5A, this through-hole package regulator is ideal for power supply designs where adjustable voltage levels are needed.
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
2N2222A
Zetex Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
SMBJ18CA
General Instrument
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ATMEGA328P-AU
Microchip Technology
ATMEGA328P-AU by Microchip: 8-bit RISC CPU, 20 MHz clock, 23 I/O lines. Ideal for industrial applications with SPI, TWI, USART connectivity and low power mode. Features include 2048 RAM bytes, 1024 EEPROM size, and 16384 ROM words.
FDV304P
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Moisture Sensitivity Level (MSL): 1; Maximum Drain Current (ID): .46 A;
FDN5618P
Onsemi
FDN5618P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage. It features a single configuration with built-in diode, suitable for switching applications. With 10A IDM and 0.17 ohm RDS(on), it operates in the temperature range of -55 to 150 °C, making it ideal for various electronic devices.
National Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Feedback Capacitance (Crss): 10 pF; JEDEC-95 Code: TO-236AB;
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3 ohm; Minimum DS Breakdown Voltage: 50 V; Terminal Form: GULL WING;
DS18B20Z+T&R
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Minimum Operating Temperature: -55 Cel; Package Body Material: PLASTIC/EPOXY;
LM107H/883C
Rochester Electronics
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Package Equivalence Code: CAN8,.2;
BAV99
Secos
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
CRCW06030000Z0EAHP
Vishay Intertechnology
Vishay Intertechnology's CRCW06030000Z0EAHP is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating temp range -55 to 155 °C, it's SMT package style makes it ideal for automotive applications meeting AEC-Q200 standard.
OPA1678IDR
OPA1678IDR by Texas Instruments is an Operational Amplifier with a Max Input Offset Voltage of 2000 uV, Nominal Voltage of 15 V, and Nominal Unity Gain Bandwidth of 16000 kHz. It is ideal for industrial applications requiring precise signal amplification in a compact package with low bias current and high common mode rejection ratio.
LM324N
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 14; Package Code: DIP; Package Shape: RECTANGULAR;
INA148UA
INA148UA by Texas Instruments is an operational amplifier with a max input offset voltage of 5000 uV and nominal common mode reject ratio of 86 dB. It operates at temperatures ranging from -55 to 125 °C and is suitable for military-grade applications due to its bipolar technology and voltage-feedback architecture. The op amp has a small outline package style, surface mount capability, and low power consumption making it ideal for compact electronic designs.
MC33274ADR2G
MC33274ADR2G by Onsemi is a quad operational amplifier with 4 functions. It offers a max input offset voltage of 1800 uV and a min slew rate of 8 V/us. Ideal for industrial applications, it operates at temperatures ranging from -40 to 85 °C and has a nominal unity gain bandwidth of 5500 kHz.
LM2902M
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 14; Package Code: SOP; Package Shape: RECTANGULAR;
INA117KU/2K5G4
INA117KU/2K5G4 by Texas Instruments is an Op Amp with 1000uV Max Input Offset Voltage, 75dB CMRR, and 2V/us Min Slew Rate. Ideal for industrial applications due to -40 to 85°C operating temp range, ±15V power supplies, and small outline package style.
OPA2132UA
OPA2132UA by Texas Instruments is an operational amplifier with a max input offset voltage of 500 uV and a nominal common mode reject ratio of 100 dB. With low bias current and high voltage gain, it is ideal for automotive applications requiring precise signal amplification in compact designs. The amplifier operates within a wide temperature range from -40 to 125 °C and supports surface mount installation for versatile integration.
LM2902D
NXP Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 14; Package Code: SOP; Package Shape: RECTANGULAR;
JM38510/11402BPA
Linear Technology
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
OPA544TG3
OPA544TG3 by Texas Instruments is an operational amplifier with a max input offset voltage of 5000 uV, 106 dB common mode reject ratio, and 35 V supply voltage. Ideal for industrial applications requiring low-bias current amplification in a compact package style with through-hole terminals.
Intersil
LM107H
Advanced Micro Devices
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Maximum Bias Current (IIB) @25C: .075 uA;
LT1013DIDRG4
LT1013DIDRG4 by Texas Instruments is a dual operational amplifier with 1000uV max input offset voltage and 114dB nominal CMRR. Ideal for industrial applications, it operates at -40 to 105 °C with micropower consumption of 1.2mA at +/-15V supplies, featuring a unity gain bandwidth of 1MHz.
OPA2227UE4
OPA2227UE4 by Texas Instruments is a dual operational amplifier with low-offset and high common mode rejection ratio. It operates on +/-15V supplies, has a unity gain bandwidth of 8MHz, and consumes 7.6mA max supply current. Ideal for industrial applications requiring precise signal amplification in compact designs.
OPA842IDR
OPA842IDR by Texas Instruments is an operational amplifier with a max input offset voltage of 1500uV, ideal for industrial applications. With a nominal bandwidth of 350MHz and min slew rate of 225V/us, it offers high performance in signal processing. Its compact package shape and surface mount capability make it suitable for space-constrained designs.
LM741CN
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
MC33179DR2G
MC33179DR2G by Onsemi is a quad operational amplifier with 4 functions. It features a max input offset voltage of 4000 uV, min slew rate of 1.2 V/us, and nominal common mode reject ratio of 110 dB. Ideal for industrial applications requiring micropower amplification in a small outline package.
LM358M
LM358M by Texas Instruments is an Operational Amplifier with 2 functions, featuring a max input offset voltage of 9000 uV and a nominal voltage of 5 V. It is commonly used in applications requiring high common mode rejection ratio and low bias current, such as sensor interfaces and signal conditioning circuits.
LMC6484IM/NOPB
LMC6484IM/NOPB by Texas Instruments is a CMOS operational amplifier with 4 functions, low bias current of 0.000004 uA, and unity gain bandwidth of 1500 kHz. It is ideal for industrial applications requiring high voltage feedback architecture, such as precision instrumentation and sensor signal conditioning.
MC33072ADR2G
MC33072ADR2G by Onsemi is a dual operational amplifier with a max input offset voltage of 5000 uV. It has a nominal common mode reject ratio of 97 dB and a min slew rate of 8 V/us. This op amp is commonly used in industrial applications requiring high voltage gain and temperature stability.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
DS160PT801ACBR
DS160PT801ACBR by Texas Instruments is a bus controller IC with 339 terminals, operating at -40 to 85°C. It supports PCI bus compatibility with a data transfer rate of 2000 MBps. This CMOS technology device has a thin profile and fine pitch package suitable for industrial applications.
TPS7A4301DGQR
TPS7A4301DGQR by Texas Instruments is an adjustable positive single output LDO regulator with a max output voltage of 14.5V and a dropout voltage of 0.6V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
DRV3255EPAPRQ1
DRV3255EPAPRQ1 by Texas Instruments is a Motion Control IC with 64 terminals, operating at -40 to 150°C. It is an AEC-Q100 compliant automotive-grade IC for Brushless DC Motor control, supporting supply voltages from 5V to 90V and output currents up to 3.5A. The package style includes a flatpack with heat sink/slug, suitable for surface mount applications in automotive systems.
UCC27284DRCR
UCC27284DRCR by Texas Instruments is a MOSFET gate driver with 2 channels, capable of handling a max output current of 3.5A. It operates in automotive-grade temperatures (-40 to 125°C) and has a turn-on/off time of 30µs. This chip carrier package with very thin profile is suitable for high side driver applications requiring fast switching speeds.
LMR43610MSC3RPERQ1
LMR43610MSC3RPERQ1 by Texas Instruments is a 9-terminal switching regulator with a max output voltage of 32V and max output current of 1A. Ideal for automotive applications, it operates b/w -40 to 150°C, featuring a buck switcher config and PWM control mode at up to 2200kHz frequency.
CC2662R1FTWRGZRQ1
CC2662R1FTWRGZRQ1 by Texas Instruments is a 32-bit microcontroller with Cortex-M4F CPU, 48 MHz clock frequency, and 81920 bytes of RAM. Ideal for industrial applications, it features 8 ADC channels, 32 DMA channels, and peripherals like AES and PWM for efficient system integration.
DRV8316RRGFR
DRV8316RRGFR by Texas Instruments is a motion control IC with a rectangular package and a terminal form of gull wing. It has a max output current of 8A and can operate at temperatures ranging from -40 to 125°C. This IC is commonly used as a brushless DC motor controller in automotive applications.
OPA2277UA/2K5
OPA2277UA/2K5 by Texas Instruments is a dual operational amplifier with low offset voltage of 100 uV and micropower consumption of 0.004 uA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1 MHz. With a compact rectangular package style, it is suitable for surface mount designs in various electronic systems.
Burr-Brown Corporation
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
OPA2227UA
OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.
OPA2277UA/2K5E4
OPA2277UA/2K5E4 by Texas Instruments is a dual operational amplifier with low-offset and micropower features. It has a max input offset voltage of 100uV, nominal common mode reject ratio of 140dB, and min slew rate of 0.8V/us. Ideal for industrial applications requiring precise signal amplification in compact designs.
OPA2277UA
OPA2277UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 100 uV and micropower consumption of 1.65 mA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1000 kHz in a small outline package.
OPA2227UA/2K5
OPA2227UA/2K5 by Texas Instruments is a dual operational amplifier with low-offset and high common mode rejection ratio. It operates at industrial temperature range, with voltage feedback architecture and 8000 kHz unity gain bandwidth. Ideal for precision applications requiring low bias current and offset voltage.
OPA2227UAE4
OPA2227UAE4 by Texas Instruments is a dual operational amplifier with low-offset and high common mode rejection ratio. It operates at a supply voltage of +-15V, has a unity gain bandwidth of 8MHz, and features a max input offset voltage of 200uV. Ideal for industrial applications requiring precise signal amplification in compact designs.
OPA2227UA/2K5E4
OPA2227UA/2K5E4 by Texas Instruments is a dual operational amplifier with low-offset and high common mode rejection ratio. It operates at a supply voltage of +-15V, has a unity gain bandwidth of 8MHz, and features a small outline package suitable for industrial applications.
OPA2227UAG4
OPA2227UAG4 by Texas Instruments is a dual operational amplifier with low-offset and high common mode rejection ratio. It operates on +/-15V supplies, has a unity gain bandwidth of 8MHz, and consumes 7.6mA max supply current. Ideal for industrial applications requiring precise signal amplification in a compact package.
OPA2277UAE4
OPA2277UAE4 by Texas Instruments is a micropower operational amplifier with low-offset and high common mode rejection ratio. It operates at a supply voltage of +-2/+-18V, has a unity gain bandwidth of 1MHz, and features a small outline package suitable for industrial applications.
OPA2277UAG4
OPA2277UAG4 by Texas Instruments is a dual operational amplifier with low-offset and micropower features. It offers a max input offset voltage of 100uV, nominal common mode reject ratio of 140dB, and min slew rate of 0.8V/us. Ideal for industrial applications requiring precise signal amplification in compact designs.
OPA2365AIDR
OPA2365AIDR by Texas Instruments is a CMOS Operational Amplifier with low-offset and low-bias features. It has a max input offset voltage of 200uV, nominal common mode reject ratio of 120dB, and nominal unity gain bandwidth of 50MHz. Ideal for automotive applications due to its temperature grade and small outline package style.
OPA277UA
OPA277UA by Texas Instruments is an operational amplifier with low-offset and micropower features. It offers a max input offset voltage of 100uV, nominal voltage of +/-15V, and a min slew rate of 0.8V/us. Ideal for industrial applications requiring precise signal amplification in compact designs.
OPA2134UA
OPA2134UA by Texas Instruments is a dual operational amplifier with a max input offset voltage of 2000 uV and a max average bias current of 0.0001 uA. It is commonly used in industrial applications due to its low-bias, high common mode reject ratio, and wide temperature range.
OPA2192IDGKR
OPA2192IDGKR by Texas Instruments is a dual operational amplifier with low-offset and low-bias features. It operates at a max supply voltage of 20V, has a nominal unity gain bandwidth of 10MHz, and offers high common mode rejection ratio for automotive applications. The package style is small outline with thin profile and shrink pitch, making it suitable for surface mount designs.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved