Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
MAX232IDWR by Texas Instruments is a Line Driver & Receiver with 2 functions, operating at -40 to 85 °C. It has inverted output polarity, Schmitt trigger input characteristics, and supports EIA-232-F interface standard. Ideal for industrial applications requiring a small outline package style and peak reflow temperature of 260C.
Median Price
$0.755
Lifecycle Status
Suppliers In-Stock
21
In-Stock Inventory
1k+
Texas Instruments
1+ parts
$0.741
100+ parts
$0.570
1k+ parts
$0.300
10k+ parts
-
Mouser Electronics
$1.340
$0.782
$0.677
$0.658
DigiKey
$0.627
Rochester
$0.769
$0.638
$0.569
Digiode
$0.396
Ozdisan Elektronik
$0.413
Nova Conductors
$1.000
Component Electronics Inc.
$3.850
$2.880
$2.500
Vyrian
Chip Stock
Schukat
$0.946
$0.752
PAR Electronics
Bristol Electronics
NAC Semi
$1.130
Sensible Micro Corp
$0.936
$0.864
Atlantic Semiconductor
Connector Distribution Corp
Right Parts Inc.
Extreme Components
Microfarads
Semi Source
Ampacity Inc.
$0.354
Semicontronic
$0.345
$0.343
Corphita
$0.375
Argo Parts USA
Continental Prestige Electronics
$0.737
Bastille Electronics
$0.950
$0.902
$0.890
Vigor
$1.440
Corohmni
$2.171
Advanced Electronics
$3.721
$3.535
Parana Technologies
$6.408
$7.156
DigiPath Technology Company
$7.056
$6.492
ChromeModa Solutions
$7.200
$5.904
IDEA Electronic Components Group
$6.480
Perfect Parts
A-Z Elektronik GmbH
Lixinc
Kepictronics
Authorized Procurement Solutions
Futuretech Components
GreenTree Electronics
This material is durable and provides protection to the internal components of the product.
Surface mount technology makes the product easy to integrate into electronic circuits and saves space on PCBs.
Higher supply voltage allows for flexibility in power supply options.
Having multiple functions in one product reduces the need for additional components in a circuit.
The product can operate effectively in high-temperature environments, making it suitable for industrial applications.
Line Drivers & Receivers MAX232IDWR attributes and parameters. Explore more Line Drivers & Receivers devices from Texas Instruments
Additional Features:
Differential Output:
Driver No. of Bits:
Input Characteristics:
Interface IC Type:
Interface Standard:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Minimum Out Swing:
Output Characteristics:
Maximum Output Low Current:
Output Polarity:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Power Supplies (V):
Qualification:
Maximum Receive Delay:
Receiver No. of Bits:
Maximum Seated Height:
Sub-Category:
Maximum Supply Current:
Maximum Supply Voltage:
Minimum Supply Voltage:
Nominal Supply Voltage:
Maximum Supply Voltage-1:
Minimum Supply Voltage-1:
Nominal Supply Voltage-1:
Surface Mount:
Technology:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width:
MAX232IDWR Interface ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Design/Specification - Material Set Rev 24/Jan/2016
Texas Instruments Inc. (TI) is one of the world's leading semiconductor companies and a global leader in analog and digital signal processing technology. The company has had a major impact on the electronics industry for over 80 years, manufacturing integrated circuits (ICs), software and subsystems that leverage high-performance computing capabilities. It offers an extensive portfolio of solutions for a wide range of industries, from aerospace to medical devices and consumer products to communication systems. Over its long history, TI has become synonymous with quality, reliability and innovation. Today, TI is one of the largest semiconductor companies in the world with operations in more than 30 countries across six continents.
President, CEO
Haviv Ilan
Chairman
Richard K. Templeton
Senior VP, CFO
Rafael R. Lizardi
M - Fab
Fabrication
Fab Initiation
1997
USA
South Portland
Wafer Capacity
32,000
D - FAB
1966
Dallas
42,000
D MOS - 6
2002
25,000
D MOS - 5
1995
75,000
Miho - 8
1980
Japan
Inashiki
43,000
S FAB 1
Sherman
91,000
F - FAB
2001
Germany
Freising
37,000
R Fab 1
2010
Richardson
40,000
D HC Line
1999
2,000
JV3
Aizu Wakamatsu
45,000
C - FAB
2007
China
Chengdu
30,000
L - Fab
2015
Lehi
70,000
R - Fab 2
2022
S - FAB 2
2025
S - FAB 3
2028
BAV99
Infinex
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Promax-johnton
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Terminal Form: GULL WING; Maximum Drain-Source On Resistance: 7.5 ohm; Minimum DS Breakdown Voltage: 60 V;
Microsemi
SN65HVD234DR
SN65HVD234DR by Texas Instruments is an 8-terminal interface circuit with a data rate of 1 Mbps. Operating temperature ranges from -40 to 125 °C, making it ideal for automotive applications. With a supply voltage of 3.3 V and low current draw of 6 mA, it's suitable for network interfaces in compact designs.
IRLML6402TRPBF
International Rectifier
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.3 W; Peak Reflow Temperature (C): 260; Package Style (Meter): SMALL OUTLINE;
CRGCQ0805F10K
TE Connectivity
TE Connectivity's CRGCQ0805F10K is a 10000 ohm fixed resistor with 1% tolerance. It operates b/w -55 to 155 °C and has a power dissipation of 0.125 W. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance.
2N2222A
General Transistor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148
Tak Cheong Electronics Holdings
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Onsemi
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Terminal Finish: Matte Tin (Sn) - annealed; Transistor Element Material: SILICON;
SMBJ18CA
Taiwan Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
North American Philips Discrete Products Div
Dc Components
Transistor & Electronic
Zetex Plc
1N4148WS
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WT
Diodes Incorporated
ABS25-32.768KHZ-1-T
Abracon
Abracon's ABS25-32.768KHZ-1-T crystal oscillator offers 10 ppm frequency tolerance, 126% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal operating frequency, such as IoT devices and precision timing systems.
LM555CN
Intersil
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
Weitronic Enterprise
ATMEGA328P-AU
Atmel
MICROCONTROLLER, RISC; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 32; Package Code: TQFP; Package Shape: SQUARE;
MAX232ACSE
Maxim Integrated
MAX232ACSE by Maxim Integrated is a Line Driver & Receiver with 2 functions, operating at 5V. It has a max transmit delay of 3500ns and can handle up to 10mA supply current. Ideal for EIA-232-E, TIA-232-E, V.28, V.24 interfaces in commercial temperature grade applications.
SN65HVD75DGKR
SN65HVD75DGKR by Texas Instruments is a Line Driver & Receiver with 3.6V max supply voltage, 17ns max transmit delay, and 70ns max receive delay. Ideal for automotive applications due to its EIA-422/EIA-485 interface standard and differential output capability.
MAX3221CAE+
LINE TRANSCEIVER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SSOP; Package Shape: RECTANGULAR;
ISL3176EIUZ-T
Renesas Electronics
ISL3176EIUZ-T by Renesas Electronics is a Line Driver & Receiver with 3.6V max supply voltage, EIA-422/EIA-485 interface standard, and BICMOS technology. It operates in industrial temperature range (-40 to 85 °C) and features differential output for reliable data transmission. Ideal for applications requiring robust communication interfaces in compact designs.
MAX3483EESA+T
Analog Devices
MAX3483EESA+T by Analog Devices is a line driver/receiver with 8 terminals, operating at 3-3.6V. It offers EIA-422/EIA-485 interface standards, differential output, and 1500ns max transmit delay. Ideal for industrial applications requiring reliable communication over short distances.
ISO1176DWRG4
ISO1176DWRG4 by Texas Instruments is a line driver/receiver with max supply voltage of 5.5V, transmit delay of 40ns, and differential output. Ideal for EIA-485/TIA-485 interfaces in industrial applications due to its small outline package and dual terminal position.
ST3485EIDT
STMicroelectronics
ST3485EIDT by STMicroelectronics is a line driver with 3-3.6V supply voltage, 30ns max transmit delay, and EIA-422/EIA-485 interface standard. It's used in automotive applications for differential output and Schmitt trigger input characteristics.
MAX2769ETI+T
LINE RECEIVER; Maximum Time At Peak Reflow Temperature (s): 30; JESD-609 Code: e3; Terminal Finish: MATTE TIN; Moisture Sensitivity Level (MSL): 1; Peak Reflow Temperature (C): 260;
MAX3232CSE+TG1Z
Analog Devices' MAX3232CSE+TG1Z is a 16-terminal line driver/receiver with 2 functions, operating at 3-5.5V. It features EIA/TIA-232 interface standard and Schmitt trigger input characteristics. Ideal for commercial applications requiring reliable data transmission in a compact, surface-mount package.
MAX13487EESA+
MAX13487EESA+ by Analog Devices is a Line Transceiver IC with BICMOS technology. It operates at 5V, has EIA-422-B and EIA-485 interface standards, and offers differential outputs. With a max supply voltage of 5.25V, it is ideal for industrial applications requiring reliable data transmission over long distances.
MAX232ACWE
MAX232ACWE by Maxim Integrated is a Line Driver & Receiver with 2 functions, operating at 5V. It has a max transmit delay of 3500ns and can handle up to 10mA supply current. Ideal for EIA-232-E, TIA-232-E, V.28, and V.24 interfaces in commercial temperature grade applications.
MAX3295AUT+T
MAX3295AUT+T by Analog Devices is a Line Driver with 3.3V power supply, 25ns max transmit delay, and EIA-422/EIA-485 interface standard. Ideal for automotive applications due to its BICMOS technology, -40 to 125 °C operating temp range, and small outline package style.
MAX485EESA+T
MAX485EESA+T by Analog Devices is a CMOS line transceiver with EIA-422 and EIA-485 interface standards. It operates at 5V, has 8 terminals, and offers differential outputs. With a small outline package, it's ideal for industrial applications requiring fast data transmission with low power consumption.
ISO3082DWG4
ISO3082DWG4 by Texas Instruments is a line driver/receiver with 16 terminals, operating at -40 to 85°C. It features a max supply voltage of 5.5V, differential output, and interface standards EIA-422/485. Ideal for industrial applications requiring high-speed data transmission in compact spaces.
SP3485CN-L
Exar
Exar's SP3485CN-L is a BICMOS line transceiver with EIA-422/EIA-485 interface. It operates at 3.3V, has 8 terminals, and offers differential output. With a max transmit delay of 60ns, it suits applications requiring fast data transmission in commercial temperature range up to 70°C.
DS89C21TMX/NOPB
National Semiconductor
LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
AM26C31CD
AM26C31CD by Texas Instruments is a 4-function line driver with 3-STATE output, BICMOS technology, and EIA-422-B interface standard. It operates at 5V with max supply voltage of 5.5V, suitable for commercial temperature grade applications requiring differential outputs in small outline packages.
LMH0387SLE/NOPB
LMH0387SLE/NOPB by Texas Instruments is a Line Transceiver with 48 terminals, operating at -40 to 85°C. It features a differential output with complementary polarity and requires a supply voltage of 3.135-3.465V. Ideal for industrial applications requiring high-speed data transmission in compact spaces due to its small form factor and low power consumption.
MAX3221ECPWR
MAX3221ECPWR by Texas Instruments is a Line Driver & Receiver with 16 terminals, operating at 3.3/5V. It features inverted output polarity, Schmitt trigger input characteristics, and EIA-232-F interface standard. Ideal for applications requiring reliable communication over short distances in commercial temperature environments.
SP3072EEN-L/TR
Maxlinear
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
DRV3255EPAPRQ1
DRV3255EPAPRQ1 by Texas Instruments is a Motion Control IC with 64 terminals, operating at -40 to 150°C. It is an AEC-Q100 compliant automotive-grade IC for Brushless DC Motor control, supporting supply voltages from 5V to 90V and output currents up to 3.5A. The package style includes a flatpack with heat sink/slug, suitable for surface mount applications in automotive systems.
TPS7A4301DGQR
TPS7A4301DGQR by Texas Instruments is an adjustable positive single output LDO regulator with a max output voltage of 14.5V and a dropout voltage of 0.6V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
UCC27284DRCR
UCC27284DRCR by Texas Instruments is a MOSFET gate driver with 2 channels, capable of handling a max output current of 3.5A. It operates in automotive-grade temperatures (-40 to 125°C) and has a turn-on/off time of 30µs. This chip carrier package with very thin profile is suitable for high side driver applications requiring fast switching speeds.
DS160PT801ACBR
DS160PT801ACBR by Texas Instruments is a bus controller IC with 339 terminals, operating at -40 to 85°C. It supports PCI bus compatibility with a data transfer rate of 2000 MBps. This CMOS technology device has a thin profile and fine pitch package suitable for industrial applications.
DRV8316RRGFR
DRV8316RRGFR by Texas Instruments is a motion control IC with a rectangular package and a terminal form of gull wing. It has a max output current of 8A and can operate at temperatures ranging from -40 to 125°C. This IC is commonly used as a brushless DC motor controller in automotive applications.
LMR43610MSC3RPERQ1
LMR43610MSC3RPERQ1 by Texas Instruments is a 9-terminal switching regulator with a max output voltage of 32V and max output current of 1A. Ideal for automotive applications, it operates b/w -40 to 150°C, featuring a buck switcher config and PWM control mode at up to 2200kHz frequency.
CC2662R1FTWRGZRQ1
CC2662R1FTWRGZRQ1 by Texas Instruments is a 32-bit microcontroller with Cortex-M4F CPU, 48 MHz clock frequency, and 81920 bytes of RAM. Ideal for industrial applications, it features 8 ADC channels, 32 DMA channels, and peripherals like AES and PWM for efficient system integration.
SP232ACT-L/TR
SP232AEN-L/TR
MAX232CSE-T
MAX232CSE-T by Maxim Integrated is a Line Driver & Receiver with 2 functions, operating at 5V. It features inverted output polarity, Schmitt trigger input characteristics, and totem-pole output. Ideal for EIA-232-E, TIA-232-E, V.28, and V.24 interface standards in commercial temperature grade applications.
MAX232CSE+T
LINE TRANSCEIVER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;
Analog Devices' MAX232CSE+T is a Line Driver & Receiver with 2 functions, operating at 5V. It features a max transmit delay of 10000ns and operates b/w temperatures of 0-70°C. Ideal for EIA-232-E, TIA-232-E, V.28, V.24 interfaces in commercial applications requiring inverted output polarity.
MAX232ACSE-T
MAX232ACSE-T by Maxim Integrated is a Line Driver & Receiver with 2 functions, operating at 5V. It has a max transmit delay of 3500ns and can handle up to 3.2A output current. Ideal for EIA-232-E, TIA-232-E, V.28, V.24 interfaces in commercial temperature applications.
MAX232ACSE+T
Rochester Electronics
MAX232ACSE+T by Analog Devices is a Line Driver & Receiver with 2 functions, operating at 5V. It has a max transmit delay of 3500ns and output polarity is inverted. Widely used in EIA-232-E, TIA-232-E, V.28, V.24 interfaces for communication applications.
MAX232CSE+
MAX232CSE
MAX232CSE by Maxim Integrated is a Line Driver & Receiver with 2 functions, operating at 5V. It has a max transmit delay of 10000ns and output polarity is inverted. Widely used in EIA-232-E, TIA-232-E interfaces for data transmission applications.
MAX232CSE+ by Analog Devices is a Line Driver & Receiver with 2 functions, operating at 5V. It has a max transmit delay of 10000ns and is used in EIA-232-E, TIA-232-E, V.28, V.24 interfaces for communication applications.
MAX232AESE-T
MAX232AESE-T by Maxim Integrated is a Line Driver & Receiver with 2 functions, operating at 5V. It has a max transmit delay of 3500ns and can handle up to 10mA supply current. Ideal for EIA-232-E, TIA-232-E, V.28, V.24 interfaces in commercial temperature grade applications.
MAX232AESE+T
LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;
MAX232AESE+T by Analog Devices is a Line Driver & Receiver with 2 functions, operating at 5V. It has a max transmit delay of 3500ns and can handle industrial temperature grades. Ideal for EIA-232-E, TIA-232-E, V.28, V.24 interfaces in various applications requiring inverted output polarity and Schmitt trigger input characteristics.
MAX232CWE+T
MAX232CWE-T
MAX232CWE-T by Maxim Integrated is a Line Driver & Receiver with 2 functions, operating at 5V. It has a max transmit delay of 10000ns and output polarity is inverted. Ideal for EIA-232-E, TIA-232-E, V.28, V.24 interfaces in commercial temperature grade applications.
MAX232CWE+T by Analog Devices is a Line Driver & Receiver with 2 functions, operating at 5V. It has a max transmit delay of 10000ns and operates b/w 0-70°C. Ideal for EIA-232-E, TIA-232-E, V.28, V.24 interfaces in commercial applications.
MAX232AEWE+T
MAX232AEWE-T
MAX232AEWE-T by Maxim Integrated is a Line Driver & Receiver with 2 functions, operating at 5V. It has a max transmit delay of 3500ns and can handle up to 10mA supply current. Ideal for EIA-232-E, TIA-232-E, V.28, and V.24 interface standards in commercial temperature grade applications.
MAX232AEWE+T by Analog Devices is a Line Driver & Receiver with 2 functions, operating at 5V. It has a max supply voltage of 5.5V and can withstand temperatures from -40 to 85°C. Ideal for industrial applications requiring EIA-232-E, TIA-232-E, V.28, or V.24 interface standards in a compact package style.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved