Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
LP5907MFX-1.8/NOPB by Texas Instruments is a fixed positive single output LDO regulator with 1.8V nominal output voltage and 0.25A max output current. It operates in a temperature range of -40 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact designs.
Median Price
$0.387
Lifecycle Status
Suppliers In-Stock
26
In-Stock Inventory
1k+
Farnell
1+ parts
$0.381
100+ parts
$0.210
1k+ parts
$0.147
10k+ parts
$0.125
Texas Instruments
$0.263
$0.135
-
Arrow
$0.523
$0.298
$0.241
DigiKey
$0.590
$0.323
$0.275
Mouser Electronics
$0.322
$0.271
$0.254
Newark
$0.597
$0.497
$0.462
Verical
Chip1Stop
$0.304
$0.238
Element14
$0.377
$0.319
$0.293
Nova Conductors
$0.269
Digiode
$0.368
Maritex
$0.670
$0.152
$0.103
Chip Stock
Vyrian
Q Components
Cyclops Electronics Ltd
Pegasus Components GmbH
NexGen Digital
HZD GmbH
Bristol Electronics
SPM Sales
Sensible Micro Corp
Prism Electronics
Elcom Components
ACDS - Activité Composants Distribution Service
Holdelec - ElecDif-Pro
Ampacity Inc.
$0.150
Semicontronic
$0.176
$0.172
$0.171
Argo Parts USA
$0.246
Netroflash
$0.256
$0.250
Component Stockers USA
$0.300
Corphita
$0.348
Corohmni
$2.166
Parana Technologies
$2.755
$255.802
$2.479
DigiPath Technology Company
$3.033
ChromeModa Solutions
$3.095
$2.538
IDEA Electronic Components Group
$2.786
Advanced Electronics
$10.009
$9.508
Perfect Parts
Epart123
$0.110
Metaverse IC Inc.
Infinite Electronics LLP (Excess)
Kepictronics
QUARKTWIN TECHNOLOGY LTD
Lixinc
iodParts Technologies Inc.
A-Z Elektronik GmbH
S.R.D Solutions
Authorized Procurement Solutions
Alle Elektronik GmbH
GreenTree Electronics
Continental Prestige Electronics
$0.308
$0.203
$0.159
Futuretech Components
Plastic/epoxy material makes the package lightweight and durable, ideal for portable and rugged applications.
Low dropout voltage ensures the regulator continues to provide a stable output even when the input voltage is close to the output voltage, improving efficiency.
Surface mount capability allows for easy integration onto PCBs, saving space and simplifying assembly.
Wide operating temperature range makes this regulator suitable for use in various environmental conditions, ensuring reliability and performance across different applications.
Stable output voltage at 1.8V provides a consistent power supply for connected components, preventing voltage fluctuations that could damage sensitive electronics.
Fixed Regulators - Positive Single Output LDO LP5907MFX-1.8/NOPB attributes and parameters. Explore more Fixed Regulators - Positive Single Output LDO devices from Texas Instruments
Adjustability:
Maximum Dropout Voltage-1:
Nominal Dropout Voltage-1:
Maximum Input Voltage Absolute:
Maximum Input Voltage:
Minimum Input Voltage:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Outputs:
No. of Terminals:
Operating Temperature (TJ-Max):
Operating Temperature (TJ-Min):
Maximum Output Current-1:
Maximum Output Voltage-1:
Minimum Output Voltage-1:
Nominal Output Voltage-1:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Packing Method:
Peak Reflow Temperature (C):
Qualification Status:
Regulator Type:
Maximum Seated Height:
Sub-Category:
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Maximum Voltage Tolerance:
Width:
LP5907MFX-1.8/NOPB Regulators trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Texas Instruments Inc. (TI) is one of the world's leading semiconductor companies and a global leader in analog and digital signal processing technology. The company has had a major impact on the electronics industry for over 80 years, manufacturing integrated circuits (ICs), software and subsystems that leverage high-performance computing capabilities. It offers an extensive portfolio of solutions for a wide range of industries, from aerospace to medical devices and consumer products to communication systems. Over its long history, TI has become synonymous with quality, reliability and innovation. Today, TI is one of the largest semiconductor companies in the world with operations in more than 30 countries across six continents.
President, CEO
Haviv Ilan
Chairman
Richard K. Templeton
Senior VP, CFO
Rafael R. Lizardi
M - Fab
Fabrication
Fab Initiation
1997
USA
South Portland
Wafer Capacity
32,000
D - FAB
1966
Dallas
42,000
D MOS - 6
2002
25,000
D MOS - 5
1995
75,000
Miho - 8
1980
Japan
Inashiki
43,000
S FAB 1
Sherman
91,000
F - FAB
2001
Germany
Freising
37,000
R Fab 1
2010
Richardson
40,000
D HC Line
1999
2,000
JV3
Aizu Wakamatsu
45,000
C - FAB
2007
China
Chengdu
30,000
L - Fab
2015
Lehi
70,000
R - Fab 2
2022
S - FAB 2
2025
S - FAB 3
2028
RC0402FR-071KL
Yageo
The Yageo RC0402FR-071KL is a fixed resistor with a resistance of 1000 ohm and a tolerance of 1%. It is suitable for surface mount applications and has a max operating temperature of 155 °C.
M39029/58360
Esterline Technologies
CONNECTOR ACCESSORY; Terminal Type: CRIMP; Removal Tools: M81969/14-01; Associated Military - Specifications: MIL-DTL-38999; IEC Conformity: NO; MIL-Connector Accessory Name: CONTACT;
1N4148WS
General Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Semitronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N2222A
Boca Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Vishay Intertechnology
Vishay Intertechnology's 1N4148WS is a single rectifier diode with a max forward voltage of 1V and output current of 0.15A. With a fast reverse recovery time of 0.004us, it operates up to 150°C. Ideal for applications requiring high-speed switching and low power consumption in surface mount configurations.
LL4148-GS08
Telefunken Microelectronics
RECTIFIER DIODE; Surface Mount: YES; JESD-609 Code: e0; No. of Elements: 1; Maximum Operating Temperature: 175 Cel; Maximum Non Repetitive Peak Forward Current: 2 A;
SMBJ18CA
Lite-on Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
General Diode
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Terminal Finish: Tin/Lead (Sn/Pb); No. of Elements: 1;
LL4148
Microsemi
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
Forward International Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .625 W; Maximum Collector Current (IC): .6 A;
1N4148WT
Taitron Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ULN2803A
STMicroelectronics
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; No. of Elements: 8; Minimum DC Current Gain (hFE): 1000;
2N7002,215
NXP Semiconductors
2N7002,215 by NXP Semiconductors is a small signal N-CHANNEL FET with a min DS breakdown voltage of 60V and max drain current of 0.3A. It is used for switching applications in enhancement mode, operates b/w -65 to 150 °C, and has a max power dissipation of 0.2W.
STM32H753IIK6
STM32H753IIK6 by STMicroelectronics is a 32-bit microcontroller with 176 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs, 2-Ch 12-Bit DACs, and peripherals like CAN, ETHERNET, and USB. Ideal for industrial applications requiring high-speed processing and extensive connectivity options.
BSS138
Siemens
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Drain-Source On Resistance: 3.5 ohm; Terminal Finish: Tin/Lead (Sn/Pb);
Changzhou Galaxy Century Microelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Minimum DS Breakdown Voltage: 50 V; Maximum Operating Temperature: 150 Cel;
Yangzhou Yangjie Electronics
LM555CN
Fairchild Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
PTPS7A2401DBVR
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR;
LP3985IM5-3.3/NOPB
LP3985IM5-3.3/NOPB by Texas Instruments is a Fixed Positive Single Output LDO Regulator with 3.3V Nominal Output Voltage, 0.15A Max Output Current, and 6V Max Input Voltage. It is ideal for applications requiring low dropout voltage and precise voltage regulation in compact designs.
ADM7172ACPZ-1.3-R7
Analog Devices
ADM7172ACPZ-1.3-R7 by Analog Devices is a CMOS LDO regulator with 1.3V output voltage, 2A max output current, and 1% voltage tolerance. Ideal for applications requiring fixed positive single output regulators in compact spaces due to its small package size and low dropout voltage of 1V.
LT1963AEQ-1.8#PBF
Linear Technology
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: TO-263; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 20 V; Maximum Voltage Tolerance: 3.5 %;
MIC2920A-3.3WS-TR
Microchip Technology
MIC2920A-3.3WS-TR by Microchip is a fixed positive single output LDO regulator with 3.3V nominal output voltage and 0.4A max output current. It features a small outline package, matte tin terminal finish, and operates in temperatures ranging from -40 to 125°C. Ideal for applications requiring stable voltage regulation in compact electronic devices.
MC33269DTRK-3.3G
Onsemi
MC33269DTRK-3.3G by Onsemi is a fixed positive single output LDO regulator with 3.3V nominal output voltage and 0.8A max output current. It has a small outline package style, operates b/w -40 to 150 °C, and offers low dropout voltage of 1.1V for applications requiring stable voltage regulation in compact designs.
ADM7172ACPZ-5.0-R7
ADM7172ACPZ-5.0-R7 by Analog Devices is a Fixed Positive Single Output LDO Regulator with 5V Nominal Output Voltage, 2A Max Output Current, and 0.27V Max Dropout Voltage. Ideal for applications requiring stable voltage regulation in compact spaces due to its small package size and low dropout voltage.
LM2940T-5.0/NOPB
National Semiconductor
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 60 V; Maximum Voltage Tolerance: 5 %; Terminal Position: SINGLE;
LD1117S33CTR
STMicroelectronics LD1117S33CTR is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1.3A. It operates within an input voltage range of 4.75V to 15V, making it suitable for various applications requiring stable voltage regulation in compact designs. The device features low dropout voltage of 1.3V, high temperature operation up to 125°C, and small outline package style for space-constrained PCB layouts.
LT1086CM-3.3#TRPBF
Analog Devices' LT1086CM-3.3#TRPBF is a fixed positive single output LDO regulator with 1.5A max output current, 3.3V nominal output voltage, and 1.5V dropout voltage. Ideal for applications requiring stable voltage regulation in a compact package, such as consumer electronics or industrial control systems.
TLV70212DBVR
TLV70212DBVR by Texas Instruments is a CMOS LDO regulator with 1.2V output voltage, 0.3A output current, and 2% voltage tolerance. It is ideal for applications requiring fixed positive single output regulators in compact spaces due to its small outline package and wide operating temperature range of -40°C to 125°C.
MIC5323-3.3YD5-TR
MIC5323-3.3YD5-TR by Microchip is a 3.3V Fixed Positive Single Output LDO Regulator with 0.17V max dropout voltage, ideal for applications requiring stable voltage supply in compact spaces. Operating temperature ranges from -40 to 125°C, making it suitable for various environments. With a max output current of 0.3A and small outline package style, it offers efficient power regulation for electronics with limited space constraints.
LP2951-33DR
LP2951-33DR by Texas Instruments is a fixed positive single output LDO regulator with 3.3V nominal output voltage, 0.1A max output current, and 30V max input voltage. It is ideal for applications requiring low dropout voltage, such as portable devices and power management systems.
TLV70018DDCR
TLV70018DDCR by Texas Instruments is a fixed positive single output LDO regulator with an output voltage of 1.8V and max current of 0.2A. Operating temperature ranges from -40°C to 125°C, making it suitable for various applications in electronics requiring stable voltage regulation in a compact package.
TPS70950DBVR
TPS70950DBVR by Texas Instruments is a fixed positive single output LDO regulator with 5V nominal output voltage and 0.15A max output current. Operating temperature ranges from -40 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact designs. The package style is small outline, low profile, shrink pitch, ideal for surface mount assembly in electronic devices.
LT1764AEQ-2.5#TRPBF
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: TO-263; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 20 V; Maximum Voltage Tolerance: 3.52 %;
MIC39100-3.3WS-TR
Micrel
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 4; Package Code: SOP; Terminal Form: GULL WING; Surface Mount: YES; Terminal Finish: MATTE TIN;
LM3940IMP-3.3/NOPB
LM3940IMP-3.3/NOPB by Texas Instruments is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1A. It has a small outline package style, operates b/w -40°C to 125°C, and offers low dropout voltage at 1V for efficient power management in various electronic applications.
SPX3819M5-L-5-0/TR
Exar
Exar's SPX3819M5-L-5-0/TR is a fixed positive single output LDO regulator with 5V nominal output voltage and 0.5A max output current. It features a small outline, low profile package style suitable for surface mount applications. With a max dropout voltage of 0.7V, it operates within a wide temperature range from -40°C to 125°C, making it ideal for various electronic devices requiring stable voltage regulation.
NCP551SN33T1G
NCP551SN33T1G by Onsemi is a 3.3V fixed positive single output LDO regulator with a max dropout voltage of 0.15V and operating temperature up to 150°C. Ideal for applications requiring stable voltage regulation in compact spaces, such as IoT devices or portable electronics.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LMR43610MSC3RPERQ1
LMR43610MSC3RPERQ1 by Texas Instruments is a 9-terminal switching regulator with a max output voltage of 32V and max output current of 1A. Ideal for automotive applications, it operates b/w -40 to 150°C, featuring a buck switcher config and PWM control mode at up to 2200kHz frequency.
CC2662R1FTWRGZRQ1
CC2662R1FTWRGZRQ1 by Texas Instruments is a 32-bit microcontroller with Cortex-M4F CPU, 48 MHz clock frequency, and 81920 bytes of RAM. Ideal for industrial applications, it features 8 ADC channels, 32 DMA channels, and peripherals like AES and PWM for efficient system integration.
DRV3255EPAPRQ1
DRV3255EPAPRQ1 by Texas Instruments is a Motion Control IC with 64 terminals, operating at -40 to 150°C. It is an AEC-Q100 compliant automotive-grade IC for Brushless DC Motor control, supporting supply voltages from 5V to 90V and output currents up to 3.5A. The package style includes a flatpack with heat sink/slug, suitable for surface mount applications in automotive systems.
TPS7A4301DGQR
TPS7A4301DGQR by Texas Instruments is an adjustable positive single output LDO regulator with a max output voltage of 14.5V and a dropout voltage of 0.6V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
DS160PT801ACBR
DS160PT801ACBR by Texas Instruments is a bus controller IC with 339 terminals, operating at -40 to 85°C. It supports PCI bus compatibility with a data transfer rate of 2000 MBps. This CMOS technology device has a thin profile and fine pitch package suitable for industrial applications.
DRV8316RRGFR
DRV8316RRGFR by Texas Instruments is a motion control IC with a rectangular package and a terminal form of gull wing. It has a max output current of 8A and can operate at temperatures ranging from -40 to 125°C. This IC is commonly used as a brushless DC motor controller in automotive applications.
UCC27284DRCR
UCC27284DRCR by Texas Instruments is a MOSFET gate driver with 2 channels, capable of handling a max output current of 3.5A. It operates in automotive-grade temperatures (-40 to 125°C) and has a turn-on/off time of 30µs. This chip carrier package with very thin profile is suitable for high side driver applications requiring fast switching speeds.
LP5907MFX-3.3/NOPB
LP5907MFX-3.3/NOPB by Texas Instruments is a Fixed Positive Single Output LDO Regulator with 3.3V nominal output voltage, 0.25A max output current, and 2% voltage tolerance. Ideal for applications requiring stable power supply in compact designs with operating temperatures ranging from -40 to 125°C.
LP5951MG-1.8/NOPB
LP5951MG-1.8/NOPB by Texas Instruments is a fixed positive single output LDO regulator with 1.8V nominal output voltage and 0.15A max output current. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring stable voltage regulation in compact electronic devices.
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: TSSOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 6.5 V; Maximum Voltage Tolerance: 3.5 %;
LP5951MF-3.0/NOPB
LP5951MF-1.8/NOPB
LP5951MG-3.3/NOPB
LP5951MG-3.3/NOPB by Texas Instruments is a 3.3V fixed positive single output LDO regulator with a max dropout voltage of 0.25V and max output current of 0.15A. Ideal for applications requiring stable voltage regulation in compact spaces due to its small outline, thin profile package style, and surface mount capability.
LP5912-3.3DRVT
LP5912-3.3DRVT by Texas Instruments is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.5A. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact spaces. The package style is small outline, heat sink/slug, very thin profile, ideal for surface mount designs with limited space constraints.
LP5912-3.3DRVR
LP5912-3.3DRVR by Texas Instruments is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.5A. It operates in an extended temperature range from -40 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact spaces. The package style includes a small outline, heat sink/slug, and very thin profile design for efficient integration into electronic devices.
LP5951MF-1.5/NOPB
LP5907MFX-3.0/NOPB
LP5907MFX-3.0/NOPB by Texas Instruments is a Fixed Positive Single Output LDO Regulator with 3V nominal output voltage, 0.25A max output current, and 2% voltage tolerance. Ideal for applications requiring stable power supply in compact spaces with operating temperatures ranging from -40 to 125°C.
LP5907MFX-2.9/NOPB
LP5907MFX-2.9/NOPB by Texas Instruments is a fixed positive single output LDO regulator with 2% voltage tolerance, 0.25A max output current, and 125°C operating temperature range. Ideal for applications requiring a compact, low-profile solution with a nominal output voltage of 2.9V in electronic devices like sensors and portable gadgets.
LP5907SNX-3.3/NOPB
LP5907SNX-3.3/NOPB by Texas Instruments is a fixed positive single output LDO regulator with a max output current of 0.25 A and a dropout voltage of 0.12 V. It is commonly used in applications that require stable and regulated power supply, such as consumer electronics and industrial equipment.
LP5907SNX-3.0/NOPB
LP5907SNX-3.0/NOPB by Texas Instruments is a fixed positive single output LDO regulator with a nominal output voltage of 3V and max output current of 0.25A. It operates in an input voltage range from 2.2V to 5.5V, making it suitable for various applications requiring stable power supply in compact electronic devices due to its small outline package style and very thin profile design.
LP5912Q3.3DRVRQ1
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 6; Package Code: HVSON; Terminal Form: NO LEAD; Maximum Input Voltage Absolute: 7 V; Maximum Voltage Tolerance: 2 %;
LP5907SNX-2.5/NOPB
LP5907SNX-2.5/NOPB by Texas Instruments is a fixed positive single output LDO regulator with a nominal output voltage of 2.5V and max output current of 0.25A. It operates in an extended temperature range from -40°C to 125°C, making it suitable for various applications requiring stable voltage regulation in compact spaces. The package style is small outline with very thin profile, ideal for surface mount designs where space is limited.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved