Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
LP2951ACMMX-3.0/NOPB by Texas Instruments is a fixed/adjustable positive single output LDO regulator with a max output voltage of 29V and dropout voltage of 0.6V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces. The package style is small outline, thin profile, shrink pitch, ideal for surface mount designs with a terminal pitch of 0.65mm.
Median Price
$0.830
Lifecycle Status
Suppliers In-Stock
9
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
100+ parts
$0.471
1k+ parts
$0.406
10k+ parts
$0.379
DigiKey
$0.405
$0.375
Adafruit Industries
$4.711
$4.476
-
Arrow
$0.354
Rochester
$0.464
$0.385
$0.343
Digiode
$0.310
Nova Conductors
$0.605
Vyrian
Anansix
Semicontronic
$0.250
$0.244
$0.242
Ampacity Inc.
Corphita
$0.293
Modulus Dynamics
$0.547
$0.541
$0.525
Continental Prestige Electronics
$0.593
Argo Parts USA
$0.587
Parana Technologies
$2.342
$2.843
DigiPath Technology Company
$2.579
$2.373
ChromeModa Solutions
$2.632
$2.158
IDEA Electronic Components Group
$2.369
Advanced Electronics
Corohmni
$9.192
QUARKTWIN TECHNOLOGY LTD
Perfect Parts
Futuretech Components
Robosynatics
$27.666
Lucentia Tech
Netroflash
$0.575
$0.563
This material provides durability and reliability to the product, ensuring a longer lifespan.
The low dropout voltage helps in maintaining a stable output voltage even when the input voltage is close to the output voltage, making it suitable for various applications.
The surface mount feature allows for easy and convenient integration onto circuit boards, saving space and simplifying the assembly process.
With a high maximum operating temperature, this regulator can function effectively even in harsh environmental conditions.
The low minimum output voltage ensures compatibility with a wide range of devices that require lower voltage levels for operation.
The bipolar technology used in this regulator provides stable and precise voltage regulation, enhancing the overall performance of the product.
The square shape of the package allows for efficient use of space on a PCB, making it ideal for compact electronic devices.
The gull wing terminal form ensures secure connections and facilitates soldering during the assembly process.
With a low minimum operating temperature, this regulator can operate reliably in cold environments without any performance degradation.
The TR packing method provides protection during transportation and storage, ensuring that the product reaches the customer in optimal condition.
Fixed & Adjustable Regulators - Positive Single Output LDO LP2951ACMMX-3.0/NOPB attributes and parameters. Explore more Fixed & Adjustable Regulators - Positive Single Output LDO devices from Texas Instruments
Adjustability:
Maximum Dropout Voltage-1:
Nominal Dropout Voltage-1:
Maximum Input Voltage Absolute:
Maximum Input Voltage:
Minimum Input Voltage:
JESD-30 Code:
JESD-609 Code:
Length:
Maximum Line Regulation:
Maximum Line Regulation (%/V):
Maximum Load Regulation:
Maximum Load Regulation (%):
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Outputs:
No. of Terminals:
Operating Temperature (TJ-Max):
Operating Temperature (TJ-Min):
Maximum Operating Temperature:
Minimum Operating Temperature:
Maximum Output Current-1:
Maximum Output Voltage-1:
Minimum Output Voltage-1:
Nominal Output Voltage-1:
Maximum Output Voltage-2:
Minimum Output Voltage-2:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Packing Method:
Peak Reflow Temperature (C):
Qualification Status:
Regulator Type:
Maximum Seated Height:
Sub-Category:
Surface Mount:
Technology:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Maximum Voltage Tolerance:
Width:
LP2951ACMMX-3.0/NOPB Regulators trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Texas Instruments Inc. (TI) is one of the world's leading semiconductor companies and a global leader in analog and digital signal processing technology. The company has had a major impact on the electronics industry for over 80 years, manufacturing integrated circuits (ICs), software and subsystems that leverage high-performance computing capabilities. It offers an extensive portfolio of solutions for a wide range of industries, from aerospace to medical devices and consumer products to communication systems. Over its long history, TI has become synonymous with quality, reliability and innovation. Today, TI is one of the largest semiconductor companies in the world with operations in more than 30 countries across six continents.
President, CEO
Haviv Ilan
Chairman
Richard K. Templeton
Senior VP, CFO
Rafael R. Lizardi
M - Fab
Fabrication
Fab Initiation
1997
USA
South Portland
Wafer Capacity
32,000
D - FAB
1966
Dallas
42,000
D MOS - 6
2002
25,000
D MOS - 5
1995
75,000
Miho - 8
1980
Japan
Inashiki
43,000
S FAB 1
Sherman
91,000
F - FAB
2001
Germany
Freising
37,000
R Fab 1
2010
Richardson
40,000
D HC Line
1999
2,000
JV3
Aizu Wakamatsu
45,000
C - FAB
2007
China
Chengdu
30,000
L - Fab
2015
Lehi
70,000
R - Fab 2
2022
S - FAB 2
2025
S - FAB 3
2028
BAV99
Gec Plessey Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Kec
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Transistor Application: SWITCHING; Package Body Material: PLASTIC/EPOXY;
ULN2803A
Sanken Electric
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; JESD-30 Code: R-PDIP-T18; Package Body Material: PLASTIC/EPOXY;
LM317T
Micro Commercial Components
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Moisture Sensitivity Level (MSL): 1; Maximum Output Current-1: 1.5 A; Operating Temperature (TJ-Min): 0 Cel;
2N2222A
Micro Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
L78L05ABZ-AP
STMicroelectronics
L78L05ABZ-AP by STMicroelectronics is a BIPOLAR fixed positive single output standard regulator with an operating temperature range of -40 to 125°C. It has a nominal output voltage of 5V, max load regulation of 0.06%, and can handle a max output current of 0.07A. Ideal for applications requiring stable voltage regulation in various electronic devices.
LM358D-T
NXP Semiconductors
LM358D-T by NXP Semiconductors is a dual operational amplifier with 70dB CMRR, 1000kHz unity gain bandwidth, and 9000uV max input offset voltage. Widely used in commercial applications due to its small outline package and low bias current of 0.5uA.
ESD5Z5.0T1G
Onsemi
ESD5Z5.0T1G by Onsemi is a unidirectional Trans Voltage Suppressor Diode with 5V reverse test voltage and 174W peak power dissipation. It is used for transient suppression in electronic circuits, meeting IEC-61000-4-2, 4-4 standards and UL recognized for reliability.
EEAGA1H4R7
Panasonic
Panasonic EEAGA1H4R7 is a 4.7uF, 50V Aluminum Electrolytic Capacitor with 0.1 Tan Delta and 0.003mA Leakage Current. Ideal for applications requiring high ripple current handling in temperatures ranging from -55 to 105°C.
CRCW06031K00FKEAHP
Vishay Intertechnology
Vishay Intertechnology's CRCW06031K00FKEAHP is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.33 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance and operating voltage of 75 V.
M39029/58-360
Defense Logistics Agency
CONNECTOR ACCESSORY; Contact Type: CRIMP REAR RELEASE; Mating Contacts: M39029/56-348, M39029/57-354; Insertion Tool Sources: MILITARY; Contact Gender: MALE; Alternate Contact Sources: MILITARY;
Diodes Incorporated
LM7805CT
Fairchild Semiconductor
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
NE555D
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LM358MX
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
RC0603JR-070RL
Yageo
Yageo's RC0603JR-070RL is a SMT fixed resistor with 0 ohm resistance, rated for temperatures from -55 to 155 °C. Its metal glaze/thick film technology and 0.1 W power dissipation make it ideal for jumper applications in various electronic devices.
LM555CN
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
National Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Package Style (Meter): SMALL OUTLINE; Terminal Position: DUAL;
1N4148
Itt Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Vpt Components
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 1 W; Maximum Collector Current (IC): .8 A; Maximum Power Dissipation Ambient: .5 W;
LP2951CSD
FIXED/ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 8; Package Code: HVSON; Terminal Form: NO LEAD; Maximum Input Voltage Absolute: 30 V; Maximum Voltage Tolerance: 2.4 %;
MAX6469UT26AD4
Analog Devices
Analog Devices' MAX6469UT26AD4 is a BICMOS LDO regulator with 1.229V min and 5V max output voltage, ideal for applications requiring fixed/adjustable positive single output regulators in compact spaces. With a package size of 2.9mm x 1.625mm x 1.45mm, it operates b/w -40 °C to +85°C, making it suitable for various electronic devices needing stable power supply solutions.
MAX6470TA24BD3
Analog Devices' MAX6470TA24BD3 is a BICMOS LDO regulator with 1.229V min and 5V max output voltage, ideal for applications requiring precise voltage regulation in compact spaces. With a max output current of 0.3A and operating temperature range from -40 °C to 85°C, it offers reliable performance for various electronic devices. This surface-mount device features a small outline package style with dual terminals, making it suitable for space-constrained designs.
MAX25210ATAA9/V+
FIXED/ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; JESD-609 Code: e3; Terminal Finish: Matte Tin (Sn) - annealed; Peak Reflow Temperature (C): 260; Maximum Time At Peak Reflow Temperature (s): 30; Moisture Sensitivity Level (MSL): 1;
LT1581CT7
LT1581CT7 by Analog Devices is a fixed/adjustable positive single output LDO regulator with max output voltage of 4.7V and max load regulation of 0.005%. It has a max dropout voltage of 0.7V and can handle up to 10A output current, making it ideal for applications requiring precise voltage regulation in various electronic devices.
MAX6469UT28AD2
Analog Devices' MAX6469UT28AD2 is a BICMOS LDO regulator with 0.21V dropout voltage, ideal for applications requiring a fixed or adjustable positive single output. With a max output current of 0.3A and input voltage up to 7V, it operates in temperatures ranging from -40 °C to 85°C, making it suitable for various electronic devices.
LT1528CQ#TRPBF
Linear Technology
FIXED/ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: TO-263; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 15 V; Maximum Voltage Tolerance: 3 %;
MAX5024LASA+T
Maxim Integrated
FIXED/ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Terminal Pitch: 1.27 mm; Technology: BICMOS;
MAX6470TA23AD4
Analog Devices' MAX6470TA23AD4 is a BICMOS LDO regulator with 1.229V min and 2.3V nominal output voltage, ideal for applications requiring fixed/adjustable positive single output regulators in compact spaces. It operates b/w -40 °C to 85°C, offering a max output current of 0.3A and a dropout voltage of 0.2V, making it suitable for various electronic devices needing precise power management.
MIC2951-03YMM-TR
Micrel
FIXED/ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 8; Package Code: TSSOP; Terminal Form: GULL WING; Moisture Sensitivity Level (MSL): 1; Package Body Material: PLASTIC/EPOXY;
LP2952IMX-3.3
Texas Instruments
LP2952IMX-3.3 by Texas Instruments is a fixed LDO regulator with 3.3V output voltage, 0.25A max current, and 1.23V min output voltage. It is ideal for applications requiring stable power supply in compact spaces due to its small outline package style and low load regulation percentage of 0.3%.
MAX6469TA27BD3
Analog Devices' MAX6469TA27BD3 is a BICMOS LDO regulator with 2.7V output voltage, 0.3A output current, and 5V max output voltage. It operates b/w -40 °C to 85°C, suitable for various applications requiring precise voltage regulation in compact designs. The device comes in a small outline package with surface mount capability, making it ideal for space-constrained electronic systems.
LP2986IMX-3.3/NOPB
LP2986IMX-3.3/NOPB by Texas Instruments is a fixed/adjustable positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.2A. It features a small outline package style, matte tin terminal finish, and operates within an extended temperature range from -40°C to 125°C. Ideal for applications requiring precise voltage regulation in compact electronic devices.
MAX6469UT21AD2
Analog Devices' MAX6469UT21AD2 is a BICMOS LDO regulator with 1.229V min and 5V max output, ideal for applications requiring fixed/adjustable positive single output regulators. Operating temp range -40 to 150 °C, it features a small outline package with dual terminals and 0.3A max output current.
MIC2951-03YN
FIXED/ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 8; Package Code: DIP; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 60 V; Maximum Voltage Tolerance: 2.4 %;
MIC2954-08YM
Microchip Technology
MIC2954-08YM by Microchip is a fixed/adjustable positive single output LDO regulator with 0.6V dropout voltage, 1% voltage tolerance, and 29V max output. Ideal for applications requiring precise voltage regulation in compact spaces due to its small outline package style and dual terminal position.
LP2960AIMX-3.3
LP2960AIMX-3.3 by Texas Instruments is a BIPOLAR LDO Regulator with 16 terminals, offering a max output current of 0.5 A and dropout voltage of 0.8 V. Ideal for applications requiring an adjustable positive single output regulator in a compact package style with surface mount capability.
LT1528CQ#TR
Analog Devices' LT1528CQ#TR is a fixed/adjustable positive single output LDO regulator with a max output current of 3A and dropout voltage of 0.85V. This surface-mount device in a small outline package is ideal for applications requiring stable 3.3V output voltage in a compact design, suitable for various electronic systems.
MAX1659ESA+
Analog Devices' MAX1659ESA+ is a CMOS LDO regulator with 8 terminals and adjustable output voltage from 4.85V to 5.15V, ideal for applications requiring precise voltage regulation in a compact package. It offers a max dropout voltage of 0.875V, operating temperature range of -40°C to 150°C, and can handle up to 0.35A output current with a small outline design suitable for surface mount applications.
MAX6470TA18BD1
Analog Devices' MAX6470TA18BD1 is a BICMOS LDO regulator with 1.8V output voltage, 0.3A max current, and 2.7% voltage tolerance. Ideal for applications requiring fixed/adjustable positive single output regulators in compact spaces with temp range -40 to +85 °C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
TPS7A4301DGQR
TPS7A4301DGQR by Texas Instruments is an adjustable positive single output LDO regulator with a max output voltage of 14.5V and a dropout voltage of 0.6V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
DS160PT801ACBR
DS160PT801ACBR by Texas Instruments is a bus controller IC with 339 terminals, operating at -40 to 85°C. It supports PCI bus compatibility with a data transfer rate of 2000 MBps. This CMOS technology device has a thin profile and fine pitch package suitable for industrial applications.
UCC27284DRCR
UCC27284DRCR by Texas Instruments is a MOSFET gate driver with 2 channels, capable of handling a max output current of 3.5A. It operates in automotive-grade temperatures (-40 to 125°C) and has a turn-on/off time of 30µs. This chip carrier package with very thin profile is suitable for high side driver applications requiring fast switching speeds.
CC2662R1FTWRGZRQ1
CC2662R1FTWRGZRQ1 by Texas Instruments is a 32-bit microcontroller with Cortex-M4F CPU, 48 MHz clock frequency, and 81920 bytes of RAM. Ideal for industrial applications, it features 8 ADC channels, 32 DMA channels, and peripherals like AES and PWM for efficient system integration.
DRV8316RRGFR
DRV8316RRGFR by Texas Instruments is a motion control IC with a rectangular package and a terminal form of gull wing. It has a max output current of 8A and can operate at temperatures ranging from -40 to 125°C. This IC is commonly used as a brushless DC motor controller in automotive applications.
DRV3255EPAPRQ1
DRV3255EPAPRQ1 by Texas Instruments is a Motion Control IC with 64 terminals, operating at -40 to 150°C. It is an AEC-Q100 compliant automotive-grade IC for Brushless DC Motor control, supporting supply voltages from 5V to 90V and output currents up to 3.5A. The package style includes a flatpack with heat sink/slug, suitable for surface mount applications in automotive systems.
LMR43610MSC3RPERQ1
LMR43610MSC3RPERQ1 by Texas Instruments is a 9-terminal switching regulator with a max output voltage of 32V and max output current of 1A. Ideal for automotive applications, it operates b/w -40 to 150°C, featuring a buck switcher config and PWM control mode at up to 2200kHz frequency.
LP2951CMX/NOPB
FIXED/ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 30 V; Maximum Voltage Tolerance: 2.4 %;
LP2951CMX/NOPB by Texas Instruments is a fixed/adjustable positive single output LDO regulator with a max output current of 0.1A and dropout voltage of 0.6V. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring precise voltage regulation in compact electronic devices.
LP2951CDR2G
LP2951CDR2G by Onsemi is a fixed/adjustable positive single output LDO regulator with a max output current of 0.1A and a nominal output voltage of 5V. It has a small outline package style, operates at temperatures ranging from -40 to 125°C, and is suitable for applications requiring precise voltage regulation in electronic circuits.
LP2951ACMX/NOPB
FIXED/ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 30 V; Maximum Voltage Tolerance: 1.5 %;
LP2951ACMX/NOPB by Texas Instruments is a fixed/adjustable positive single output LDO regulator with 0.6V max dropout voltage, 5V nominal output voltage, and 125°C max operating temperature. Ideal for applications requiring precise voltage regulation in compact spaces.
LP2951ACDR2G
LP2951ACDR2G by Onsemi is a fixed/adjustable positive single output LDO regulator with a max output current of 0.1A and a nominal output voltage of 5V. It features a small outline package style, operates at temperatures ranging from -40 to 125 °C, and has a dropout voltage as low as 0.35V, making it ideal for various applications requiring precise voltage regulation in compact designs.
LP2951CMX-3.3/NOPB
LP2951CMX-3.3/NOPB by Texas Instruments is a BIPOLAR LDO Regulator with 3.3V Nominal Output Voltage, 0.1A Max Output Current, and 30V Max Input Voltage. Ideal for applications requiring low dropout voltage and precise voltage regulation in compact designs.
LP2951CMX-3.0/NOPB
LP2951CMX-3.0/NOPB by Texas Instruments is a fixed/adjustable positive single output LDO regulator with 3V nominal output voltage, 0.1A max output current, and 29V max output voltage. It operates in temperatures ranging from -40 to 125°C and is suitable for applications requiring precise voltage regulation in compact electronic devices.
LP2951ACMX-3.3/NOPB
LP2951ACMX-3.3/NOPB by Texas Instruments is a fixed/adjustable positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.1A. It has a small outline package style, operates b/w -40 to 125 °C, and offers low load regulation at 0.2%. Ideal for applications requiring precise voltage regulation in compact designs.
FIXED/ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 30 V; Maximum Voltage Tolerance: 1.4 %;
LP2951ACMX-3.0/NOPB
LP2951ACMX-3.0/NOPB by Texas Instruments is a fixed/adjustable positive single output LDO regulator with 3V nominal output voltage, 0.1A max output current, and 29V max output voltage. Ideal for applications requiring precise voltage regulation in compact spaces with operating temperatures ranging from -40 to 125°C.
LP2951ACMM-3.3/NOPB
LP2951ACMM-3.3/NOPB by Texas Instruments is a fixed/adjustable positive single output LDO regulator with 3.3V nominal output voltage, 0.6V max dropout voltage, and 0.2% max load regulation. Ideal for applications requiring precise voltage regulation in a compact form factor such as portable electronics and IoT devices.
FIXED/ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 8; Package Code: TSSOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 30 V; Maximum Voltage Tolerance: 1.4 %;
LP2951ACMM/NOPB
LP2951ACMM/NOPB by Texas Instruments is a BIPOLAR LDO Regulator with 8 terminals. It offers a Nominal Output Voltage of 5V, Max Dropout Voltage of 0.6V, and Max Load Regulation of 0.2%. Ideal for applications requiring a fixed/adjustable positive single output regulator in compact spaces with operating temperatures ranging from -40°C to 125°C.
Rochester Electronics
FIXED/ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 8; Package Code: TSSOP; Terminal Form: GULL WING; Nominal Output Voltage-1: 5 V; Maximum Output Voltage-1: 29 V;
FIXED/ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 8; Package Code: TSSOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 30 V; Maximum Voltage Tolerance: 1.5 %;
LP2951ACM-3.0/NOPB
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved