Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
LM5122QMH/NOPB by Texas Instruments is a switching controller with a 12V nominal input voltage and 1000 kHz max switching frequency. It operates in automotive-grade conditions (-40 to 125 °C) and supports buck-boost configuration for applications requiring a min output voltage of 3V up to a max of 100V. The package style is small outline, heat sink/slug, thin profile, shrink pitch with dual terminal position and gull wing form.
Median Price
$7.350
Lifecycle Status
Suppliers In-Stock
9
In-Stock Inventory
1k+
Texas Instruments
1+ parts
$4.856
100+ parts
$4.255
1k+ parts
$2.404
10k+ parts
-
Farnell
$5.070
$3.050
$2.950
DigiKey
$4.880
$4.433
$4.325
Mouser Electronics
$4.690
$4.430
$4.310
Element14
$9.770
$8.610
$8.320
Nova Conductors
$3.606
Digiode
$4.313
Chip Stock
Vyrian
Argo Parts USA
$2.325
Bastille Electronics
$3.426
$3.254
$3.209
Semicontronic
$3.860
$3.764
$3.744
Ampacity Inc.
Corphita
$4.086
Continental Prestige Electronics
$6.090
$4.510
Advanced Electronics
$6.614
$6.283
Corohmni
$19.700
Parana Technologies
$20.876
$21.058
DigiPath Technology Company
$22.987
$21.148
ChromeModa Solutions
$23.456
$19.234
IDEA Electronic Components Group
$22.283
$21.110
Lixinc
QUARKTWIN TECHNOLOGY LTD
GreenTree Electronics
A-Z Elektronik GmbH
Metaverse IC Inc.
Perfect Parts
This material provides durability and protection for the internal components of the switching regulator, ensuring a longer lifespan.
Allows for easy and efficient installation onto circuit boards, making it convenient for assembly in various electronic devices.
Suitable for a wide range of applications that require a 12V input voltage, providing versatility for different electronic systems.
Offers ample connection points for external components, enabling flexibility in design and functionality.
Current-mode control offers better stability and response in regulating output voltage, enhancing overall performance and efficiency.
Capable of operating in extreme cold conditions, making it suitable for use in a wide range of environments and applications.
Provides a high output voltage capability, making it suitable for applications that require a wide range of voltage levels.
Offers both step-up and step-down capabilities, providing versatile voltage regulation for different load requirements.
Switching Regulators & Controllers LM5122QMH/NOPB attributes and parameters. Explore more Switching Regulators & Controllers devices from Texas Instruments
Additional Features:
Other IC type:
Control Mode:
Control Technique:
Maximum Input Voltage:
Minimum Input Voltage:
Nominal Input Voltage:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Outputs:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Maximum Output Voltage:
Minimum Output Voltage:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Qualification:
Maximum Seated Height:
Sub-Category:
Nominal Supply Voltage (Vsup):
Surface Mount:
Switcher Config:
Maximum Switching Frequency:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width (mm):
LM5122QMH/NOPB Other Function Semiconductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Design/Specification - LM5122 17/Jul/2017 LM5122 Series Datasheet Update 14/Jul/2017
Texas Instruments Inc. (TI) is one of the world's leading semiconductor companies and a global leader in analog and digital signal processing technology. The company has had a major impact on the electronics industry for over 80 years, manufacturing integrated circuits (ICs), software and subsystems that leverage high-performance computing capabilities. It offers an extensive portfolio of solutions for a wide range of industries, from aerospace to medical devices and consumer products to communication systems. Over its long history, TI has become synonymous with quality, reliability and innovation. Today, TI is one of the largest semiconductor companies in the world with operations in more than 30 countries across six continents.
President, CEO
Haviv Ilan
Chairman
Richard K. Templeton
Senior VP, CFO
Rafael R. Lizardi
M - Fab
Fabrication
Fab Initiation
1997
USA
South Portland
Wafer Capacity
32,000
D - FAB
1966
Dallas
42,000
D MOS - 6
2002
25,000
D MOS - 5
1995
75,000
Miho - 8
1980
Japan
Inashiki
43,000
S FAB 1
Sherman
91,000
F - FAB
2001
Germany
Freising
37,000
R Fab 1
2010
Richardson
40,000
D HC Line
1999
2,000
JV3
Aizu Wakamatsu
45,000
C - FAB
2007
China
Chengdu
30,000
L - Fab
2015
Lehi
70,000
R - Fab 2
2022
S - FAB 2
2025
S - FAB 3
2028
1N4148
National Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N7002
Sinyork
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Operating Temperature: 85 Cel; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Operating Mode: ENHANCEMENT MODE;
43025-0400
Molex
The Molex 43025-0400 is a board connector with 4 contacts, 2 rows, and a mating contact pitch of 0.118". It has a body length of 0.27", insulation resistance of 1Gohm, and operates b/w -40 to 105°C. Ideal for commercial applications requiring a female connector with crimp termination and UL94V-0 flammability rating.
Renesas Electronics
LM358N
Fairchild Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
EU2B-YS3203F
Idec
ROTARY SWITCH;
MBRA160T3G
Onsemi
MBRA160T3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.51V. It operates b/w -55 to 150°C, has a reverse test voltage of 60V, and is ideal for power applications due to its high efficiency and small outline package style.
Weitronic Enterprise
M39029/58-360
Tri-star Electronics International
CONNECTOR ACCESSORY; Material: COPPER ALLOY; MIL Conformity: YES; Associated Military - Specifications: MIL-C-55302/69, MIL-C-38999; MIL-Connector Accessory Name: CONTACT; Terminal Type: CRIMP;
Philips Semiconductors
SS14
Vishay Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Surface Mount: YES; Technology: SCHOTTKY; No. of Phases: 1; Config: SINGLE; Maximum Operating Temperature: 125 Cel;
BSS84-7-F
Diodes Incorporated
Diodes Inc. BSS84-7-F is a P-channel FET with 50V DS breakdown voltage, 0.13A max drain current, and 10 ohm RDS(on). Ideal for switching applications, it features a single configuration with built-in diode in a small outline package. Operating in enhancement mode at up to 150°C, it has Gull Wing terminals and matte tin finish.
SDR0604-101KL
Bourns
SDR0604-101KL by Bourns is a surface mount fixed inductor with a nominal inductance of 100 uH. It is a general purpose inductor suitable for power applications, with a max rated current of 0.52 A and a self-resonance frequency of 9 MHz.
BSS138
Sipex
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Moisture Sensitivity Level (MSL): 1; Peak Reflow Temperature (C): 240;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
Taiwan Semiconductor
STM32H753IIT6
STMicroelectronics
STM32H753IIT6 by STMicroelectronics is a 32-bit microcontroller with 176 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs and 2-Ch 12-Bit DACs, suitable for industrial applications requiring high-speed data processing and connectivity via CAN, ETHERNET, USB, and more.
M39029/56-351
Defense Logistics Agency
CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Gender: FEMALE; Mating Contacts: M39029/58-363; Removal Tool Sources: MILITARY; Alternate Contact Sources: MILITARY;
BAV99
Kingwell Technonlogy
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM22675MR-5.0/NOPB
LM22675MR-5.0/NOPB by Texas Instruments is a switching regulator with 1A output current, 500kHz max switching frequency, and VOLTAGE-MODE control technique. Ideal for automotive applications due to its low profile design, it operates b/w -40°C to 125°C temperature range efficiently regulating voltage from 4.5V to 42V down to a min of 1.285V.
LM2596T-5.0/NOPB
LM2596T-5.0/NOPB by Texas Instruments is a 3A BUCK switching regulator with an input voltage range of 4.5V to 40V and output voltage of 5V. It operates in voltage-mode control with a max frequency of 173kHz, making it suitable for automotive applications due to its temperature grade up to 125°C.
LM27313XMF/NOPB
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 5; Package Code: LSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LM2674M-3.3/NOPB
LM2674M-3.3/NOPB by Texas Instruments is a voltage-mode switching regulator with a 3.3V output, ideal for automotive applications. It operates b/w -40 to 125°C, handles up to 0.5A output current, and supports input voltages from 6.5V to 40V. The package is small outline with dual terminals and matte tin finish, making it suitable for compact designs requiring efficient power regulation at high temperatures.
LM5145RGYR
LM5145RGYR by Texas Instruments is a voltage-mode switching controller with a max output voltage of 60V and max output current of 30A. With a control technique of pulse width modulation, it operates in automotive applications at temperatures ranging from -40 to 125°C. This chip carrier package with matte tin finish is ideal for buck converter configurations in various electronic systems.
LM2672MX-ADJ/NOPB
LM2672MX-ADJ/NOPB by Texas Instruments is a voltage-mode switching regulator with a max output current of 1A and a max output voltage of 37V. It operates in an automotive temperature grade range from -40°C to 125°C, making it suitable for various automotive applications. With pulse width modulation control technique and buck switcher configuration, this IC is ideal for power management in automotive electronics.
LMZ12003TZ-ADJ/NOPB
Switching Regulator or Controllers; No. of Terminals: 7; Surface Mount: YES; Terminal Position: SINGLE; JESD-609 Code: e3; Peak Reflow Temperature (C): 245;
MC34063ADG
MC34063ADG by Onsemi is a switching regulator with 8 terminals, operating b/w 0-70°C. It has a max output current of 1.5A and supports voltage-mode control technique at a frequency of up to 100 kHz. Ideal for applications requiring efficient power conversion in compact spaces.
LM3488MMX/NOPB
LM3488MMX/NOPB by Texas Instruments is a switching controller with current-mode control, operating at -40 to 125°C. It offers a max output voltage of 500V and max output current of 1A. Ideal for automotive applications, this IC features pulse width modulation and buck-boost switcher configuration.
LM2674MX-5.0/NOPB
LM2674MX-5.0/NOPB by Texas Instruments is a voltage-mode switching regulator with 8 terminals, operating b/w -40 to 125°C. It offers a max output current of 0.5A, nominal output voltage of 5V, and supports buck configuration. Ideal for automotive applications due to its compact size (4.9mm x 3.9mm) and DMOS technology with PWM control technique at a max frequency of 260kHz.
TPS40210DGQR
TPS40210DGQR by Texas Instruments is a switching regulator with 10 terminals, operating temperature range of -40 to 125°C, and output current up to 0.4A. It is ideal for automotive applications due to its compact size (3x3mm), pulse width modulation control technique, and buck-boost switcher configuration.
MP9486AGN-Z
Monolithic Power Systems
MP9486AGN-Z by Monolithic Power Systems is a voltage-mode switching regulator with a 60V nominal input and output voltage, operating b/w -40 to 125°C. This small outline IC has a max switching frequency of 1MHz, making it suitable for automotive applications requiring efficient buck converter control.
TPS40170RGYR
TPS40170RGYR by Texas Instruments is a voltage-mode switching regulator with a max output current of 20A and a max output voltage of 57V. It operates in automotive-grade temperatures (-40 to 125°C) and is suitable for applications requiring high efficiency power conversion, such as automotive electronics or industrial automation systems.
UCC28C43DRG4
UCC28C43DRG4 by Texas Instruments is a voltage-mode switching controller with a max output current of 1A and a max switching frequency of 1kHz. It operates in an industrial temperature range from -40°C to 105°C, making it suitable for various power management applications. With a small outline package style and surface-mount capability, this BICMOS technology-based IC is ideal for compact designs requiring efficient pulse width modulation control.
TPS54060DGQ
TPS54060DGQ by Texas Instruments is a switching regulator with a max output current of 0.5A and max input voltage of 60V, suitable for automotive applications. It operates in current-mode control with a PWM technique, offering a wide temperature range from -40 to 150°C. The compact square package style makes it ideal for space-constrained designs.
LM2576TV-5G
LM2576TV-5G by Onsemi is a 5V switching regulator with max output current of 7.5A and PWM control mode. Ideal for automotive applications, it operates b/w -40 to 125°C, accepting input voltages from 8-40V to deliver stable 5V output. Its buck configuration and high switching frequency make it suitable for various power supply designs.
LM27761DSGT
LM27761DSGT by Texas Instruments is a small outline, heat sink package with 8 terminals. It operates at -40 to 85°C and supports input voltage from 2.7V to 5.5V, outputting up to -1.5V at 0.25A max current. Ideal for industrial applications requiring a switched capacitor inverter with pulse frequency modulation control technique.
LMZM23600SILT
LMZM23600SILT by Texas Instruments is a switching regulator with 10 terminals, operating temperature range of -40 to 125°C, and output voltage up to 15V. Ideal for automotive applications, it features pulse width modulation control mode and buck-boost switcher configuration. With a compact rectangular package style, it is surface mountable and suitable for various microelectronic assemblies.
TPS82130SILT
TPS82130SILT by Texas Instruments is a voltage-mode switching regulator with 3A output current, operating at -40 to 125°C. Ideal for automotive applications, it offers a wide input voltage range of 3-17V and a compact package style of 2.8mm x 3mm, making it suitable for space-constrained designs.
LM2596S-5.0
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 5; Package Code: TO-263; Package Shape: RECTANGULAR; Surface Mount: YES;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
DS160PT801ACBR
DS160PT801ACBR by Texas Instruments is a bus controller IC with 339 terminals, operating at -40 to 85°C. It supports PCI bus compatibility with a data transfer rate of 2000 MBps. This CMOS technology device has a thin profile and fine pitch package suitable for industrial applications.
DRV8316RRGFR
DRV8316RRGFR by Texas Instruments is a motion control IC with a rectangular package and a terminal form of gull wing. It has a max output current of 8A and can operate at temperatures ranging from -40 to 125°C. This IC is commonly used as a brushless DC motor controller in automotive applications.
TPS7A4301DGQR
TPS7A4301DGQR by Texas Instruments is an adjustable positive single output LDO regulator with a max output voltage of 14.5V and a dropout voltage of 0.6V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
DRV3255EPAPRQ1
DRV3255EPAPRQ1 by Texas Instruments is a Motion Control IC with 64 terminals, operating at -40 to 150°C. It is an AEC-Q100 compliant automotive-grade IC for Brushless DC Motor control, supporting supply voltages from 5V to 90V and output currents up to 3.5A. The package style includes a flatpack with heat sink/slug, suitable for surface mount applications in automotive systems.
CC2662R1FTWRGZRQ1
CC2662R1FTWRGZRQ1 by Texas Instruments is a 32-bit microcontroller with Cortex-M4F CPU, 48 MHz clock frequency, and 81920 bytes of RAM. Ideal for industrial applications, it features 8 ADC channels, 32 DMA channels, and peripherals like AES and PWM for efficient system integration.
UCC27284DRCR
UCC27284DRCR by Texas Instruments is a MOSFET gate driver with 2 channels, capable of handling a max output current of 3.5A. It operates in automotive-grade temperatures (-40 to 125°C) and has a turn-on/off time of 30µs. This chip carrier package with very thin profile is suitable for high side driver applications requiring fast switching speeds.
LMR43610MSC3RPERQ1
LMR43610MSC3RPERQ1 by Texas Instruments is a 9-terminal switching regulator with a max output voltage of 32V and max output current of 1A. Ideal for automotive applications, it operates b/w -40 to 150°C, featuring a buck switcher config and PWM control mode at up to 2200kHz frequency.
LM5164DDAR
LM5164DDAR by Texas Instruments is a switching regulator with 1A output current, 90V max output voltage, and 1000kHz max switching frequency. Ideal for automotive applications due to its -40 to 150°C operating temperature range and compact design. Suitable for various power management tasks in automotive electronics systems.
LM5160ADNTT
LM5160ADNTT by Texas Instruments is a 12-terminal switching regulator with a max output current of 2A and a max output voltage of 60V. It operates at temperatures ranging from -40 to 125°C, making it suitable for automotive applications. With a compact square package style and pulse width modulation control technique, it is ideal for space-constrained designs requiring efficient power management.
LM5116MHX/NOPB
SWITCHING CONTROLLER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 20; Package Code: HTSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LM5116MHX/NOPB by Texas Instruments is a switching controller with 20 terminals, operating at -40 to 150°C. It supports a max output current of 20A and has a control mode of current-mode PWM. Ideal for automotive applications due to its compact size, high efficiency, and wide input voltage range from 6V to 100V.
LM5122MH/NOPB
LM5122MH/NOPB by Texas Instruments is a switching controller with a current-mode control technique. It operates in a wide temperature range from -40 to 125°C and supports a max output voltage of 100V. Ideal for automotive applications, this IC has a compact rectangular package with 20 terminals and can handle input voltages ranging from 3V to 65V.
LM5164QDDARQ1
LM5164QDDARQ1 by Texas Instruments is a switching regulator with 1A output current, 90V max output voltage, and 1000kHz max switching frequency. Ideal for automotive applications due to its -40 to 150°C operating temperature range and small outline package style.
LM5122MHX/NOPB
LM5122MHX/NOPB by Texas Instruments is a switching controller with a current-mode control technique. It operates in a wide temperature range from -40 to 125°C, making it suitable for automotive applications. With a max output voltage of 100V and a buck-boost switcher configuration, it offers high efficiency and flexibility in power management.
LM5166DRCT
LM5166DRCT by Texas Instruments is a switching regulator with a max output voltage of 65V and max output current of 0.5A. It operates in automotive temperature grade range (-40 to 150°C) making it suitable for automotive applications. With pulse frequency modulation control technique, it offers high efficiency up to 600kHz switching frequency.
LM5122MHE/NOPB
LM5122MHE/NOPB by Texas Instruments is a switching controller with a current-mode control technique. It operates in a wide temperature range from -40 to 125°C and supports input voltages ranging from 3V to 65V. With a max output voltage of 100V and a compact package style, it is ideal for automotive applications requiring high efficiency and precise voltage regulation.
LM5164DDAT
LM5164DDAT by Texas Instruments is a switching regulator with 1A output current, 90V max output voltage, and 1000kHz max switching frequency. Ideal for automotive applications due to its -40 to 150°C operating temperature range and compact design suitable for small outline packages.
LM5145RGYT
LM5145RGYT by Texas Instruments is a switching regulator with a max output voltage of 60V and max output current of 30A. Operating b/w -40 to 125°C, it uses pulse width modulation control technique for automotive applications. With a package style of chip carrier and heat sink/slug, this device supports a wide input voltage range from 6V to 75V.
LM5118MHX/NOPB
SWITCHING CONTROLLER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 20; Package Code: HSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LM5118MHX/NOPB by Texas Instruments is a current-mode switching controller with a max output voltage of 70V and max output current of 10A. Operating b/w -40 to 125°C, it's ideal for automotive applications due to its buck-boost switcher configuration and pulse width modulation control technique. This small outline IC has a package style with heat sink, making it suitable for compact designs requiring high efficiency.
LM5146QRGYTQ1
LM5146QRGYTQ1 by Texas Instruments is a switching controller with a max output voltage of 60V and max output current of 30A. Operating in voltage-mode control technique, it has a wide input voltage range from 5.5V to 100V, making it suitable for automotive applications requiring high power efficiency. With a compact chip carrier package style and pulse width modulation, this device offers precise regulation in a small form factor for various power management needs.
LM5164QDDATQ1
LM5164QDDATQ1 by Texas Instruments is a small outline switching regulator with a max output current of 1A and a max output voltage of 90V. Ideal for automotive applications, it operates in temperatures ranging from -40 to 150°C and supports input voltages b/w 6-100V.
LM5117PMHE/NOPB
LM5146QRGYRQ1
LM5146QRGYRQ1 by Texas Instruments is a switching controller with a max output current of 30A and a control technique of pulse width modulation. It operates in automotive applications, with a wide input voltage range from 5.5V to 100V and a max operating temperature of 150°C. This chip carrier package has 20 terminals and is surface mountable for compact designs.
LM5116MH/NOPB
LM5116MH/NOPB by Texas Instruments is a switching controller with 20 terminals, operating b/w -40 to 150°C. It supports a max output voltage of 80V and current up to 20A, making it ideal for automotive applications requiring high efficiency and precise current-mode control at frequencies up to 1MHz.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved