Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
LM2907N-8 by Texas Instruments is an Analog Special Purpose Converter with 1% linearity error, operating at 12V. It is a voltage to frequency converter in an industrial-grade package suitable for temperature ranges from -40°C to 85°C. With a max supply current of 6mA, it offers precise conversion for various applications.
Median Price
$1.030
Lifecycle Status
Suppliers In-Stock
35
In-Stock Inventory
1k+
Rochester
1+ parts
-
100+ parts
1k+ parts
$0.855
10k+ parts
$0.762
Digiode
$0.803
Nova Conductors
$0.810
American Microsemiconductor Inc.
$0.970
Ace Electronics
$2.000
Component Electronics Inc.
$3.850
$2.880
$2.500
Vyrian
Anansix
Chip Stock
ECAB
ComSIT Distribution GmbH
Electronic Expediters
Flex Direct, LLC
DF Sales Co.
ACDS - Activité Composants Distribution Service
Fibra_Brandt Electronic GMBH
R&J Components
Mil-Aero Solutions, Inc.
MISTER SPROCKETS
Inventory MP
PAR Electronics
Manotoh
EMSNET
Holdelec - ElecDif-Pro
LittleDiode
Sea View Technologies
Bristol Electronics
GES GmbH
Euro-Tech
Prism Electronics
Corel Iberica Componentes, S.L.
Electro Mavin
Mentor Electronics Marketing, LLC
Sinequanon
Ampacity Inc.
$0.720
Semicontronic
$0.702
$0.698
Corphita
$0.760
Continental Prestige Electronics
$0.794
Argo Parts USA
Netroflash
Component Stockers USA
$0.860
AZTECH Wire
$13.121
Parana Technologies
$18.702
$18.795
ChromeModa Solutions
$21.013
$17.231
IDEA Electronic Components Group
$19.962
$18.912
Corohmni
$26.249
QUARKTWIN TECHNOLOGY LTD
Metaverse IC Inc.
A-Z Elektronik GmbH
DigiPath Technology Company
$18.945
Alle Elektronik GmbH
Perfect Parts
Cyclops Electronics Ltd (Excess)
Kepictronics
Assy Fe
Infinite Electronics LLP (Excess)
GreenTree Electronics
Glotronic Ltd.
The use of plastic/epoxy as the package body material provides durability and good insulation for the components inside, making the product suitable for various industrial environments.
The low linearity error of 1% ensures accurate conversion of voltage to frequency, making this product reliable for applications requiring precise measurements.
With a power supply of 12V, this product can operate efficiently and reliably in industrial settings without the need for frequent power adjustments.
The high maximum operating temperature of 85°C allows this product to function effectively in challenging environments with elevated temperatures.
The use of bipolar technology in this converter ensures accurate and stable voltage to frequency conversion, making it suitable for high-performance applications that require precision.
Analog Special Purpose Converters LM2907N-8 attributes and parameters. Explore more Analog Special Purpose Converters devices from Texas Instruments
Converter Type:
Technology:
Maximum Linearity Error (EL):
No. of Functions:
Nominal Supply Voltage:
Power Supplies:
Maximum Supply Current:
Maximum Positive Input Voltage:
Maximum Operating Temperature:
Minimum Operating Temperature:
Temperature Grade:
Moisture Sensitivity Level (MSL):
Terminal Position:
Terminal Form:
No. of Terminals:
Terminal Finish:
Terminal Pitch:
Surface Mount:
Width:
Length:
Maximum Seated Height:
Package Body Material:
Package Shape:
Package Style:
Package Code:
Package Equivalence Code:
Qualification:
JESD-30 Code:
JESD-609 Code:
LM2907N-8 Converters trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
Texas Instruments Inc. (TI) is one of the world's leading semiconductor companies and a global leader in analog and digital signal processing technology. The company has had a major impact on the electronics industry for over 80 years, manufacturing integrated circuits (ICs), software and subsystems that leverage high-performance computing capabilities. It offers an extensive portfolio of solutions for a wide range of industries, from aerospace to medical devices and consumer products to communication systems. Over its long history, TI has become synonymous with quality, reliability and innovation. Today, TI is one of the largest semiconductor companies in the world with operations in more than 30 countries across six continents.
President, CEO
Haviv Ilan
Chairman
Richard K. Templeton
Senior VP, CFO
Rafael R. Lizardi
M - Fab
Fabrication
Fab Initiation
1997
USA
South Portland
Wafer Capacity
32,000
D - FAB
1966
Dallas
42,000
D MOS - 6
2002
25,000
D MOS - 5
1995
75,000
Miho - 8
1980
Japan
Inashiki
43,000
S FAB 1
Sherman
91,000
F - FAB
2001
Germany
Freising
37,000
R Fab 1
2010
Richardson
40,000
D HC Line
1999
2,000
JV3
Aizu Wakamatsu
45,000
C - FAB
2007
China
Chengdu
30,000
L - Fab
2015
Lehi
70,000
R - Fab 2
2022
S - FAB 2
2025
S - FAB 3
2028
OPA2227UA
Texas Instruments
OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.
SMBJ18CA
Db Lectro
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
BAV99
Plessey Semiconductors Discrete Components Div
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
Silicon Standard
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002-T1-E3
Vishay Intertechnology
Vishay Intertechnology's 2N7002-T1-E3 is a N-CHANNEL FET for SWITCHING applications. Features include 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. With ENHANCEMENT MODE operation, this GULL WING transistor is ideal for small outline surface mount designs up to 150°C.
2N7002
Bytesonic Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Terminal Position: DUAL; Minimum Operating Temperature: -55 Cel;
FDN306P
Onsemi
FDN306P by Onsemi is a P-CHANNEL FET with 12V DS Breakdown Voltage, ideal for SWITCHING applications. It features SINGLE configuration with BUILT-IN DIODE and GULL WING terminals. Operating in ENHANCEMENT MODE, it has a max ID of 2.6A and 0.04 ohm RDS(on), suitable for small outline packages at temperatures ranging from -55 to 150°C.
2N2222A
Secos
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .6 A; JEDEC-95 Code: TO-92;
1N4148
Rfe International
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Forward Voltage (VF): 1 V; Config: SINGLE;
0460-202-16141
TE Connectivity
TE Connectivity's 0460-202-16141 contact features a crimp terminal type, machined contact design, and rated AC voltage of 1500V. With a wire gauge range of 20-16 AWG, it is ideal for applications requiring a male round pin-socket contact style in assembly products.
Taiwan Semiconductor
RECTIFIER DIODE; Surface Mount: NO; Peak Reflow Temperature (C): 260; Maximum Operating Temperature: 175 Cel; JESD-609 Code: e3; No. of Elements: 1;
LM358M
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
LM78L05ACMX/NOPB
LM78L05ACMX/NOPB by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 0.1A. It operates b/w 0-125°C, has a dropout voltage of 1.6V, and can handle input voltages up to 30V making it ideal for various electronic applications requiring stable power supply.
BSS84-7-F
SPC TECHNOLOGY/ MULTICOMP
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Transistor Element Material: SILICON;
LL4148
Excel (Suzhou) Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM358M by Texas Instruments is an Operational Amplifier with 2 functions, featuring a max input offset voltage of 9000 uV and a nominal voltage of 5 V. It is commonly used in applications requiring high common mode rejection ratio and low bias current, such as sensor interfaces and signal conditioning circuits.
LM555CN
Fairchild Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
General Semiconductor
LTC1968CMS8#TR
Analog Devices
LTC1968CMS8#TR by Analog Devices is an RMS to DC converter with 0.15% max linearity error, operating from 4.5V to 5.5V supply voltage range. Its small outline package makes it ideal for commercial temperature applications requiring precise signal conversion in a compact form factor.
AD636KQ
Maxim Integrated
RMS TO DC CONVERTER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 14; Package Code: DIP; Package Shape: RECTANGULAR;
AD537KD
AD537KD by Analog Devices is a voltage to frequency converter with 0.1% linearity error, operating at 0-70°C. It has a max supply voltage of 36V and operates at a frequency of 0.15 MHz. Ideal for applications requiring precise voltage to frequency conversion in commercial temperature environments.
AD7740YRMZ-REEL
AD7740YRMZ-REEL by Analog Devices is a voltage to frequency converter with 0.018% linearity error, operating at up to 1 MHz frequency. It has a supply voltage range of 3V to 3.6V and can withstand temperatures from -40°C to 105°C. Ideal for industrial applications requiring precise analog signal conversion in a compact, surface-mount package.
AD650KP
AD650KP by Analog Devices is a voltage to frequency converter with 0.1% linearity error, operating at up to 1 MHz. It has a max supply voltage of 18 V and can function in temperatures ranging from 0°C to 70°C. This chip carrier package is ideal for applications requiring precise frequency conversion in commercial-grade environments.
MX536AJCWE+T
RMS TO DC CONVERTER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;
VFC110BG
VFC110BG by Texas Instruments is a voltage to frequency converter with 0.05% linearity error, operating at up to 4 MHz. It has a supply voltage range of ±15 V and can handle temperatures from -25°C to 85°C. Ideal for applications requiring precise frequency conversion in compact spaces.
LM2917N-N
LM2917N-N by Texas Instruments is an Analog Special Purpose Converter with 14 terminals and a 12V power supply. Operating b/w -40°C to 85°C, it's ideal for industrial applications requiring a D/A converter with a nominal voltage of 12V. The package style is in-line, made of plastic/epoxy material, and has a rectangular shape.
LM2907N-8/NOPB
VOLTAGE TO FREQUENCY CONVERTER; Temperature Grade: INDUSTRIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
AD8436ACPZ-WP
AD8436ACPZ-WP by Analog Devices is a 20-terminal RMS to DC converter with a max supply voltage of 18V and operating temperature range of -40 to 125°C. Suitable for automotive applications, it features a square package shape, terminal pitch of 0.5mm, and low supply current of 0.4mA.
AD737KR
AD737KR by Analog Devices is an 8-terminal RMS to DC converter with a max supply voltage of 16.5V and linearity error of 0.35%. It operates in temperatures from 0 to 70°C, making it suitable for commercial applications requiring accurate signal conversion.
AD652KPZ-REEL
AD652KPZ-REEL by Analog Devices is a V/F converter with 0.02% EL, operating at 4 MHz max frequency and supporting -18V to +18V supply range. Ideal for precision voltage-to-frequency conversion in commercial applications. Package: CHIP CARRIER, Temp Range: 0-70°C, Terminals: 20.
5962-8963701CX
Analog Devices' 5962-8963701CX is a MILITARY-grade RMS to DC converter with 14 terminals. It operates b/w -55 to 125 °C, with linearity error of 0.05% and total error of 0.7%. Ideal for applications requiring accurate conversion in harsh environments.
AD536AKH
AD536AKH by Analog Devices is an RMS to DC converter with a max supply voltage of 18V and operating frequency of 0.09MHz. It has a total error of 0.2%, suitable for commercial temperature grades, and features a cylindrical package shape made of metal. This converter is ideal for applications requiring accurate conversion in analog special purpose systems.
AD637BR
AD637BR by Analog Devices is a RMS to DC converter with 0.05% linearity error, operating at -40 to 85 °C. It has a max supply voltage of 18 V and consumes 3 mA current, suitable for industrial applications requiring precise signal conversion in a compact package.
LM2917MX-8
VOLTAGE TO FREQUENCY CONVERTER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
AD736KRZ-REEL7
AD736KRZ-REEL7 by Analog Devices is an RMS to DC converter with 0.35% linearity error, operating at 70 °C max temperature and 0°C min temperature. It has a supply voltage range of 2.8V to 16.5V, making it suitable for precision measurement applications in various industries.
CS-2917N14
CS-2917N14 by Onsemi is a D/A converter with 12V supply, operating from -40 to 85 °C. It features 14 terminals in an industrial-grade rectangular package suitable for analog special purpose applications. The technology used is bipolar with tin/lead terminal finish and through-hole form factor.
AD637KDZ
AD637KDZ by Analog Devices is an RMS to DC converter with 0.05% linearity error, operating at a max frequency of 0.15 MHz. It has a supply voltage range of +-15V and can handle temperatures from 0 to 70°C. Ideal for precision signal processing applications requiring accurate conversion and low total error within commercial temperature grades.
8413
Dymec
VOLTAGE TO FREQUENCY CONVERTER; Temperature Grade: COMMERCIAL; Terminal Form: PIN/PEG; No. of Terminals: 8; Package Shape: SQUARE; Surface Mount: NO;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
DRV3255EPAPRQ1
DRV3255EPAPRQ1 by Texas Instruments is a Motion Control IC with 64 terminals, operating at -40 to 150°C. It is an AEC-Q100 compliant automotive-grade IC for Brushless DC Motor control, supporting supply voltages from 5V to 90V and output currents up to 3.5A. The package style includes a flatpack with heat sink/slug, suitable for surface mount applications in automotive systems.
DS160PT801ACBR
DS160PT801ACBR by Texas Instruments is a bus controller IC with 339 terminals, operating at -40 to 85°C. It supports PCI bus compatibility with a data transfer rate of 2000 MBps. This CMOS technology device has a thin profile and fine pitch package suitable for industrial applications.
DRV8316RRGFR
DRV8316RRGFR by Texas Instruments is a motion control IC with a rectangular package and a terminal form of gull wing. It has a max output current of 8A and can operate at temperatures ranging from -40 to 125°C. This IC is commonly used as a brushless DC motor controller in automotive applications.
LMR43610MSC3RPERQ1
LMR43610MSC3RPERQ1 by Texas Instruments is a 9-terminal switching regulator with a max output voltage of 32V and max output current of 1A. Ideal for automotive applications, it operates b/w -40 to 150°C, featuring a buck switcher config and PWM control mode at up to 2200kHz frequency.
UCC27284DRCR
UCC27284DRCR by Texas Instruments is a MOSFET gate driver with 2 channels, capable of handling a max output current of 3.5A. It operates in automotive-grade temperatures (-40 to 125°C) and has a turn-on/off time of 30µs. This chip carrier package with very thin profile is suitable for high side driver applications requiring fast switching speeds.
TPS7A4301DGQR
TPS7A4301DGQR by Texas Instruments is an adjustable positive single output LDO regulator with a max output voltage of 14.5V and a dropout voltage of 0.6V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
CC2662R1FTWRGZRQ1
CC2662R1FTWRGZRQ1 by Texas Instruments is a 32-bit microcontroller with Cortex-M4F CPU, 48 MHz clock frequency, and 81920 bytes of RAM. Ideal for industrial applications, it features 8 ADC channels, 32 DMA channels, and peripherals like AES and PWM for efficient system integration.
LM2907M-8/NOPB
LM2917M-8/NOPB
LM2917M-8/NOPB by Texas Instruments is an Analog Special Purpose Converter with 1% linearity error. It operates at 12V, converts voltage to frequency, and has a max supply voltage of 28V. Ideal for industrial applications requiring precise voltage-to-frequency conversion in a compact package.
LM2917N-8/NOPB
LM2907MX-8/NOPB
LM2907MX-8/NOPB by Texas Instruments is an Analog Special Purpose Converter with 1% linearity error. It operates at 12V, with a max supply voltage of 28V and a max positive input voltage of 10.5V. Ideal for industrial applications requiring voltage to frequency conversion in a compact small outline package.
LM2917MX-8/NOPB
LM2917MX-8/NOPB by Texas Instruments is a voltage to frequency converter with a max supply voltage of 28V and a max linearity error of 1%. It is commonly used in industrial applications for converting voltage signals into frequency outputs.
LM2907N/NOPB
VOLTAGE TO FREQUENCY CONVERTER; Temperature Grade: INDUSTRIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 14; Package Code: DIP; Package Shape: RECTANGULAR;
LM2917MX/NOPB
VOLTAGE TO FREQUENCY CONVERTER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 14; Package Code: SOP; Package Shape: RECTANGULAR;
LM2917M/NOPB
LM2907MX
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved