Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
DRV5053VAEDBZRQ1 by Texas Instruments is a magnetic field sensor with a supply voltage range of 2.7V to 38V and operating temperatures from -40°C to 150°C. It offers an analog output voltage range of 0-2V, making it ideal for applications requiring precise magnetic field measurements in automotive systems compliant with AEC-Q100 standards.
Median Price
$0.390
Lifecycle Status
Suppliers In-Stock
8
In-Stock Inventory
1k+
Rochester
1+ parts
100+ parts
$0.380
1k+ parts
$0.370
10k+ parts
-
Texas Instruments
$0.631
$0.429
$0.220
Chip1Stop
$0.358
Digiode
$0.599
Chip Stock
Vyrian
Cyclops Electronics Ltd
Nova Conductors
Corphita
$0.568
Ampacity Inc.
$0.660
Parana Technologies
$2.853
$3.343
DigiPath Technology Company
$3.142
$2.891
ChromeModa Solutions
$3.206
$2.629
IDEA Electronic Components Group
$2.885
AZTECH Wire
$16.440
Netroflash
Provides durability and protection for the internal components of the sensor, making it suitable for various environments.
Allows for flexibility in power supply options and compatibility with a wide range of systems.
Certified automotive-grade quality ensures reliability and performance in automotive applications.
Compact size allows for easy integration into different systems without taking up much space.
Utilizes Hall effect technology for accurate and reliable detection of magnetic fields.
Low profile design enables the sensor to be discreetly installed in various applications.
Sleek and standardized design for easy mounting and integration into different systems.
Allows for lower power consumption and compatibility with systems with lower voltage requirements.
High operating temperature range ensures the sensor can perform reliably in extreme conditions.
Provides a specific voltage range for easy signal processing and integration with other components.
Analog output allows for continuous signal transmission for real-time monitoring and control.
Wide temperature range ensures the sensor can function in cold environments without issues.
High-quality terminal finish for improved conductivity and resistance to corrosion.
Low operating current for energy-efficient performance and minimal power consumption.
Complementary output signals enhance accuracy and reliability in signal processing.
Lightweight and durable plastic housing for protection and ease of handling during installation.
High output current capacity for driving external loads or components without the need for additional amplification.
Bipolar input mode allows for detection of both positive and negative magnetic fields for versatile applications.
Compact size and shape for easy installation and integration into different systems.
Solder termination for secure and reliable electrical connections during installation.
Surface mount design for easy and secure attachment to circuit boards or surfaces for stable operation.
Magnetic Field Sensors DRV5053VAEDBZRQ1 attributes and parameters. Explore more Magnetic Field Sensors devices from Texas Instruments
Additional Features:
Body Width:
Body Height:
Body Length/Diameter:
Housing:
Input Mode:
JESD-609 Code:
Linearity (%):
Mounting Feature:
Maximum Operating Current:
Maximum Operating Temperature:
Minimum Operating Temperature:
Maximum Output Current:
Output Polarity:
Output Range:
Output Type:
Package Body Material:
Package Shape or Style:
Screening Level:
Sensors or Transducers Type:
Maximum Supply Voltage:
Minimum Supply Voltage:
Terminal Finish:
Termination Type:
DRV5053VAEDBZRQ1 Sensors & Transducers trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Packaging - Packing material change 08/Jun/2020
Texas Instruments Inc. (TI) is one of the world's leading semiconductor companies and a global leader in analog and digital signal processing technology. The company has had a major impact on the electronics industry for over 80 years, manufacturing integrated circuits (ICs), software and subsystems that leverage high-performance computing capabilities. It offers an extensive portfolio of solutions for a wide range of industries, from aerospace to medical devices and consumer products to communication systems. Over its long history, TI has become synonymous with quality, reliability and innovation. Today, TI is one of the largest semiconductor companies in the world with operations in more than 30 countries across six continents.
President, CEO
Haviv Ilan
Chairman
Richard K. Templeton
Senior VP, CFO
Rafael R. Lizardi
M - Fab
Fabrication
Fab Initiation
1997
USA
South Portland
Wafer Capacity
32,000
D - FAB
1966
Dallas
42,000
D MOS - 6
2002
25,000
D MOS - 5
1995
75,000
Miho - 8
1980
Japan
Inashiki
43,000
S FAB 1
Sherman
91,000
F - FAB
2001
Germany
Freising
37,000
R Fab 1
2010
Richardson
40,000
D HC Line
1999
2,000
JV3
Aizu Wakamatsu
45,000
C - FAB
2007
China
Chengdu
30,000
L - Fab
2015
Lehi
70,000
R - Fab 2
2022
S - FAB 2
2025
S - FAB 3
2028
1N4148
Continental Device India
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LL4148
Microsemi
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
PIC18F4550-I/ML
Microchip Technology
The Microchip Technology PIC18F4550-I/ML is an 8-bit microcontroller with a max clock frequency of 48 MHz. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it ideal for industrial applications requiring high-speed data processing and analog-to-digital conversion. With low power mode and flash ROM programmability, this chip offers efficient performance in compact designs.
LM555CM
LM555CM by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V and max operating temperature of 70°C. It comes in a small outline package, suitable for applications requiring pulse generation or rectangular waveform outputs. With surface mount capability and low supply current of 15mA, it is ideal for commercial-grade electronic circuits.
BSS138
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3.5 ohm; Maximum Drain Current (ID): .2 A; Peak Reflow Temperature (C): NOT SPECIFIED;
SS14
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ECS-.327-12.5-17X-TR
Ecs International
ECS-0.327-12.5-17X-TR by Ecs International is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing in temperature ranges from -40 to 85 °C, such as telecommunications and industrial automation.
BAV99
Frontier Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
2N2222A
Baneasa S A
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; Qualification: Not Qualified;
MS3V-T1R32.768KHZ+/-20PPM12.5PF
Golledge Electronics
MS3V-T1R32.768KHZ+/-20PPM12.5PF by Golledge Electronics is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 12.5 pF load capacitance. It is ideal for applications requiring precise timing in temperature-sensitive environments due to its -40 to 85 °C operating range.
STM32H753BIT6
STMicroelectronics
STM32H753BIT6 by STMicroelectronics is a 32-bit microcontroller with 208 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs, 2-Ch 12-Bit DACs, and extensive peripherals for industrial applications like CAN, Ethernet, and USB connectivity. With a wide temperature range of -40 to +85 °C, it's ideal for demanding environments requiring high-speed processing capabilities.
2N7002
Kec
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Transistor Application: SWITCHING; Package Body Material: PLASTIC/EPOXY;
Tt Electronics Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; JESD-30 Code: O-MBCY-W3;
BSS138-TP
Micro Commercial Components
BSS138-TP by Micro Commercial Components is a N-channel small signal FET with a min DS breakdown voltage of 50V and max drain current of 0.22A. It is commonly used in applications requiring enhancement mode operation, such as power management and switching circuits.
Bytesonic Electronics
SMBJ18CA
Concord Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V;
1N4148WT
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FT232RQ-REEL
FTDI's FT232RQ-REEL is a USB bus controller with 32 terminals, operating at 3.3-5.25V. It supports data transfer rates up to 60MBps and clock frequency of 12.02MHz, suitable for RS232/RS422/RS485 interfaces in various applications like industrial automation and communication systems.
Vishay Telefunken
APS12210LLHALT
Allegro MicroSystems
MAGNETIC FIELD SENSOR,HALL EFFECT;
TLE49645MXTSA1
Infineon Technologies
TLE49645MXTSA1 by Infineon: Magnetic Field Sensor with 32V max supply, 2.5mT hysteresis, and 0-25mA output range. Ideal for Hall Effect sensing in automotive applications due to its compact size and current output capability.
DRV5053VAQLPGM
DRV5053VAQLPGM by Texas Instruments is a magnetic field sensor with a supply voltage range of 2.5V to 38V and output range of 0-2V. It operates in temperatures from -40°C to 125°C, making it suitable for various applications requiring precise analog voltage outputs. With a max output current of 2.3A, this rectangular sensor is ideal for through-hole mounting in electronic systems.
DRV5032DUDBZT
Texas Instruments' DRV5032DUDBZT is a magnetic field sensor with 5.5V max supply voltage, 0.7 mT hysteresis, and 0-5.5V digital output range. Ideal for applications requiring precise magnetic field detection in a compact rectangular package.
TLE4966-3K
TLE4966-3K by Infineon is a magnetic field sensor with 2.7-18V supply range, 5mT hysteresis, and 0-10mA digital current output. Ideal for applications requiring precise magnetic field detection in compact spaces like automotive sensors and industrial automation systems.
SNDH-T4P-G01
Honeywell Sensing And Control
Honeywell SNDH-T4P-G01 is a Hall effect magnetic field sensor with 4.5-18V supply voltage range, -40 to 150°C operating temperature, and 20A output current. It features a cylindrical design with flange mount for easy installation and uses a digital open-collector output interface. Ideal for applications requiring precise magnetic field sensing in industrial environments.
A3212EELLT-T
Allegro MicroSystems' A3212EELLT-T is a magnetic field sensor with 3.5V max supply voltage, 0.59 mT hysteresis, and AEC-Q100 screening. Ideal for automotive applications due to its digital current output type, -40 to 85°C operating temperature range, and compact square package design.
A3291KLHLX-T
A3291KLHLX-T by Allegro MicroSystems is a magnetic field sensor with 3-24V supply, 20mT hysteresis, and 30-60mA output. Ideal for hall effect sensing applications in automotive systems due to its -40 to 125°C operating range and solder termination for surface mounting.
2SS52M
2SS52M by Honeywell is a magnetic field sensor with a plastic/epoxy body, measuring 1.6" in width and 4.5mm in height. It operates b/w -40 to 150°C, outputs analog current up to 20mA, and has a max magnetic field range of 2.5mT. Ideal for applications requiring precise magnetic field detection like automotive sensors or industrial automation systems.
MLX90290LSE-AAA-310-RE
Melexis N V
MLX90290LSE-AAA-310-RE by Melexis N V is a 3-terminal Hall effect magnetic field sensor with 1.5% linearity, operating b/w -40 to 150°C. It features an analog current output, CMOS technology, and can handle up to 8mA current. Ideal for surface mount applications in automotive and industrial sectors.
DRV5033FAQDBZR
DRV5033FAQDBZR by Texas Instruments is a magnetic field sensor with hysteresis of 1.5 mT, operating temperature range from -40 to 125°C, and output voltage range of 0-38V. Ideal for applications requiring precise detection of magnetic fields in a compact rectangular package.
DRV5056A1QLPG
Texas Instruments' DRV5056A1QLPG is a magnetic field sensor with 3-3.63V supply voltage range, -40 to 125°C operating temperature, and 19mT min magnetic field range. It outputs analog voltage from 0.535-3.1V with a max current of 1A, making it ideal for Hall effect sensing applications in various industries.
APS12200LUAA
SS494B
SS494B by Honeywell is a magnetic field sensor with 3 terminals, operating voltage range of 4.5V to 10.5V, and sensitivity of 5mV/G. It features an output circuit type of transistor and package body material made of plastic/epoxy. Ideal for applications requiring precise magnetic field detection in environments ranging from -40°C to 150°C.
A1325LLHLX-T
Allegro MicroSystems' A1325LLHLX-T is a magnetic field sensor with 1.5% linearity, 3125 mV/G sensitivity, and analog voltage output. Ideal for applications requiring precise magnetic field measurements in temperatures ranging from -40 to 150°C.
DRV5053VAQDBZR
Texas Instruments' DRV5053VAQDBZR is a magnetic field sensor with voltage output. It operates in temperatures from -40 to 125°C, with supply voltage range of 2.5-38V and max output current of 2.3A. Ideal for applications requiring precise magnetic field sensing in compact designs.
SNDH-T4P-G02
Honeywell SNDH-T4P-G02 is a Hall effect magnetic field sensor with 4.5-18V supply, -40 to 150°C temp range, and 20A output current. It features a cylindrical design with flange mount for industrial applications requiring precise digital output sensing.
SS461A-T2
SS461A-T2 by Honeywell is a magnetic field sensor with 3.8-30V power supply, -40 to 150°C operating temp, and 5-8.5mT magnetic field range. It has a rectangular plastic package and through-hole mounting feature, suitable for applications requiring digital current output in industrial environments.
DRV5056A1EDBZRQ1
DRV5056A1EDBZRQ1 by Texas Instruments is a magnetic field sensor with a supply voltage range of 3V to 3.6V and operating temperature from -40°C to 150°C. It features an analog current output ranging from -1mA to 1mA, making it ideal for automotive applications requiring precise magnetic field detection in harsh environments. With AEC-Q100 screening level, this rectangular surface mount sensor offers high accuracy and reliability for automotive systems.
ACS70310LKTATN-010B5-C
Allegro MicroSystems' ACS70310LKTATN-010B5-C is a magnetic field sensor with 4.5-5.5V supply voltage range, AEC-Q100 screening, and 150°C max operating temp. Ideal for automotive applications, this Hall effect sensor offers 0.50-4.50V analog output and 10mV/G sensitivity for precise measurements in harsh environments.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
TPS7A4301DGQR
TPS7A4301DGQR by Texas Instruments is an adjustable positive single output LDO regulator with a max output voltage of 14.5V and a dropout voltage of 0.6V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
LMR43610MSC3RPERQ1
LMR43610MSC3RPERQ1 by Texas Instruments is a 9-terminal switching regulator with a max output voltage of 32V and max output current of 1A. Ideal for automotive applications, it operates b/w -40 to 150°C, featuring a buck switcher config and PWM control mode at up to 2200kHz frequency.
DS160PT801ACBR
DS160PT801ACBR by Texas Instruments is a bus controller IC with 339 terminals, operating at -40 to 85°C. It supports PCI bus compatibility with a data transfer rate of 2000 MBps. This CMOS technology device has a thin profile and fine pitch package suitable for industrial applications.
DRV8316RRGFR
DRV8316RRGFR by Texas Instruments is a motion control IC with a rectangular package and a terminal form of gull wing. It has a max output current of 8A and can operate at temperatures ranging from -40 to 125°C. This IC is commonly used as a brushless DC motor controller in automotive applications.
CC2662R1FTWRGZRQ1
CC2662R1FTWRGZRQ1 by Texas Instruments is a 32-bit microcontroller with Cortex-M4F CPU, 48 MHz clock frequency, and 81920 bytes of RAM. Ideal for industrial applications, it features 8 ADC channels, 32 DMA channels, and peripherals like AES and PWM for efficient system integration.
DRV3255EPAPRQ1
DRV3255EPAPRQ1 by Texas Instruments is a Motion Control IC with 64 terminals, operating at -40 to 150°C. It is an AEC-Q100 compliant automotive-grade IC for Brushless DC Motor control, supporting supply voltages from 5V to 90V and output currents up to 3.5A. The package style includes a flatpack with heat sink/slug, suitable for surface mount applications in automotive systems.
UCC27284DRCR
UCC27284DRCR by Texas Instruments is a MOSFET gate driver with 2 channels, capable of handling a max output current of 3.5A. It operates in automotive-grade temperatures (-40 to 125°C) and has a turn-on/off time of 30µs. This chip carrier package with very thin profile is suitable for high side driver applications requiring fast switching speeds.
DRV5053VAQLPG
Texas Instruments DRV5053VAQLPG is a magnetic field sensor with 2.5-38V supply voltage range, -40 to 125°C operating temperature, and 0-2V output. Ideal for applications requiring Hall effect sensors like automotive, industrial automation, and robotics due to its compact size (1.52" x 4mm) and high output current capability of 2.3A.
DRV5023AJQLPG
DRV5023AJQLPG by Texas Instruments is a magnetic field sensor with 38V max supply voltage, 3.7mT hysteresis, and -40 to 125°C operating temp range. Ideal for applications requiring precise digital voltage output in unipolar input mode.
DRV5023BIQDBZT
DRV5023BIQDBZT by Texas Instruments is a magnetic field sensor with a supply voltage range of 2.5V to 38V and hysteresis of 8.5mT. It operates in temperatures from -40°C to 125°C, offering an output range of 0-38V via open-drain interface. Ideal for applications requiring precise digital voltage output based on magnetic field detection.
DRV5053OAQLPG
DRV5053OAQLPG by Texas Instruments is a magnetic field sensor with a max supply voltage of 38V. It has a compact body width of 1.52 inch and a height of 5.05 mm. This sensor is commonly used in applications requiring voltage output for measuring magnetic fields, such as robotics and automotive systems.
DRV5053CAQLPG
DRV5053CAQLPG by Texas Instruments is a magnetic field sensor with a voltage output range of 0-2V. It operates b/w -40 to 125°C, with a supply voltage range of 2.5V to 38V. Ideal for applications requiring precise Hall effect sensing in compact spaces.
DRV5023FAEDBZRQ1
Texas Instruments' DRV5023FAEDBZRQ1 is a magnetic field sensor with hysteresis of 1.5 mT, operating temperature range from -40 to 150 °C, and output current up to 30 A. Ideal for automotive applications due to AEC-Q100 screening level, it features a digital current output via open-drain interface in a compact rectangular package.
DRV5033AJQDBZRQ1
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: SURFACE MOUNT; Output Type: DIGITAL CURRENT; Package Shape or Style: RECTANGULAR; Output Range: 0-30mA; Hysteresis: 3.4 mT;
DRV5053OAQDBZT
Texas Instruments' DRV5053OAQDBZT is a magnetic field sensor with voltage output, operating b/w -40 to 125°C. It has a supply voltage range of 2.5-38V and can handle up to 3.6mA current. Ideal for applications requiring precise magnetic field detection in compact spaces.
DRV5032FBDBZR
DRV5032FBDBZR by Texas Instruments is a magnetic field sensor with a max supply voltage of 5.5V and hysteresis of 1.5mT. It is commonly used in applications such as hall effect sensors, where it provides a digital current output range of -5.0-5.0mA for detecting magnetic fields ranging from 0.5mT to 4.8mT.
DRV5033AJEDBZRQ1
Texas Instruments' DRV5033AJEDBZRQ1 is a magnetic field sensor with hysteresis of 3.4 mT and output range of 0-38V. Ideal for automotive applications due to AEC-Q100 screening, it operates b/w -40 to 150 °C and has a max supply voltage of 38V.
DRV5053EAQDBZT
Texas Instruments' DRV5053EAQDBZT is a magnetic field sensor with voltage output. It operates b/w -40 to 125°C, with supply voltage range of 2.5-38V and max output current of 2.3A. Ideal for applications requiring precise magnetic field detection in compact spaces.
DRV5033AJQDBZTQ1
DRV5033AJQDBZTQ1 by Texas Instruments is a magnetic field sensor with hysteresis of 3.4 mT, operating temperature range from -40 to 125°C, and output current up to 30 A. It is used in automotive applications for precise detection of magnetic fields in harsh environments.
DRV5053VAQDBZRQ1
DRV5053VAQDBZRQ1 by Texas Instruments is a magnetic field sensor with a supply voltage range of 2.7V to 38V and operating temperatures from -40°C to 125°C. It offers an analog output voltage range of 0-2V, making it suitable for automotive applications requiring precise magnetic field detection in harsh environments compliant with AEC-Q100 standards.
DRV5033AJQDBZR
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: SURFACE MOUNT; Output Type: DIGITAL VOLTAGE; Package Shape or Style: RECTANGULAR; Output Range: 0-38V; Output (V): OPEN-DRAIN;
DRV5055A2EDBZRQ1
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: SURFACE MOUNT; Output Type: ANALOG CURRENT; Package Shape or Style: RECTANGULAR; Output Range: -1-1mA; Maximum Operating Temperature: 150 Cel;
DRV5013AGQDBZR
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: SURFACE MOUNT; Output Type: DIGITAL VOLTAGE; Package Shape or Style: RECTANGULAR; Output Range: 0-38V; Termination Type: SOLDER;
DRV5032FDDMRT
DRV5032FDDMRT by Texas Instruments is a magnetic field sensor with a max supply voltage of 5.5V and hysteresis of 1.5mT. It is commonly used in applications such as hall effect sensors, where it provides a digital current output range of -5.0-5.0mA for detecting magnetic fields ranging from 0.5mT to 4.8mT.
DRV5055A3QLPGM
Texas Instruments' DRV5055A3QLPGM is a magnetic field sensor with 3-3.63V supply voltage range, -40 to 125°C operating temperature, and -1-1mA analog current output. Ideal for applications requiring precise Hall effect sensing in a compact 4x1.52x5.05mm rectangular package with through-hole mounting.
DRV5053OAQLPGMQ1
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; Output Type: CURRENT OUTPUT; Package Shape or Style: RECTANGULAR; Output Range: 0-2.3mA; JESD-609 Code: e3;
DRV5033AJQLPGMQ1
DRV5033AJQLPGMQ1 by Texas Instruments is a magnetic field sensor with hysteresis of 3.4 mT, operating temperature range from -40 to 125 °C, and output current up to 30 A. It is used in automotive applications for precise current measurement and detection of magnetic fields in the range of 1-12 mT.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved