Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
DAC124S085CIMM/NOPB by Texas Instruments is a 12-bit D/A converter with 5.5V max analog output voltage, 8.5us settling time, and 0.1953% linearity error. Ideal for industrial applications, it operates b/w -40 to 105°C and features a small outline package with dual terminals for easy mounting in tight spaces.
Median Price
$7.728
Lifecycle Status
Suppliers In-Stock
26
In-Stock Inventory
1k+
Farnell
1+ parts
$7.190
100+ parts
$4.630
1k+ parts
$4.540
10k+ parts
-
Texas Instruments
$6.300
$4.200
Arrow
$9.479
$6.236
$5.792
Mouser Electronics
$9.850
$6.540
$5.930
Chip1Stop
$10.453
$6.174
$5.686
DigiKey
$5.935
Element14
$8.740
$8.120
Verical
RS (Exports)
$4.738
$3.686
Maritex
$4.767
Ozdisan Elektronik
$5.533
Nova Conductors
$6.380
Digiode
$7.342
Component Electronics Inc.
$11.540
$8.650
$7.500
Bristol Electronics
$11.600
Cyclops Electronics Ltd
Vyrian
Chip Stock
Anansix
NAC Semi
$17.110
$15.790
Sensible Micro Corp
ACDS - Activité Composants Distribution Service
Semtec, LLC
Microfarads
SPM Sales
Elcom Components
Semicontronic
$5.170
$5.041
$5.015
Aranea Global
$6.252
$6.002
Continental Prestige Electronics
$6.460
$4.940
Corphita
$6.955
Parana Technologies
$11.492
$11.903
DigiPath Technology Company
$12.654
$11.641
IDEA Electronic Components Group
$12.912
$12.266
$11.621
ChromeModa Solutions
$10.588
Corohmni
$22.679
Advanced Electronics
$26.371
$25.053
Lixinc
Perfect Parts
A-Z Elektronik GmbH
Argo Parts USA
Glotronic Ltd.
Alle Elektronik GmbH
Futuretech Components
Kepictronics
S.R.D Solutions
Authorized Procurement Solutions
GreenTree Electronics
iodParts Technologies Inc.
$5.251
Higher analog output voltage allows for greater flexibility in signal processing and provides better dynamic range.
Higher number of bits results in higher resolution and improved signal accuracy.
Fast settling time allows for quicker response to input changes and better overall performance.
Support for multiple power supply voltages enables versatile integration into different systems.
Wide operating temperature range makes this product suitable for industrial applications in varying environments.
High sample rate allows for capturing fast-changing signals with high fidelity.
Digital-to-Analog Converters DAC124S085CIMM/NOPB attributes and parameters. Explore more Digital-to-Analog Converters devices from Texas Instruments
Technology:
Sub-Category:
Input Format:
Input Bit Code:
Maximum Linearity Error (EL):
Nominal Settling Time (tstl):
Maximum Supply Current:
Maximum Settling Time:
Sample Rate:
No. of Bits:
No. of Functions:
Nominal Supply Voltage:
Minimum Analog Output Voltage:
Maximum Analog Output Voltage:
Power Supplies:
Minimum Operating Temperature:
Maximum Operating Temperature:
Temperature Grade:
Peak Reflow Temperature:
Maximum Time At Peak Reflow Temperature:
Moisture Sensitivity Level (MSL):
No. of Terminals:
Terminal Form:
Terminal Position:
Terminal Pitch:
Terminal Finish:
Surface Mount:
Width:
Length:
Maximum Seated Height:
Package Body Material:
Package Shape:
Package Style:
Package Code:
Package Equivalence Code:
Qualified:
JESD-30 Code:
JESD-609 Code:
DAC124S085CIMM/NOPB Converters trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
Texas Instruments Inc. (TI) is one of the world's leading semiconductor companies and a global leader in analog and digital signal processing technology. The company has had a major impact on the electronics industry for over 80 years, manufacturing integrated circuits (ICs), software and subsystems that leverage high-performance computing capabilities. It offers an extensive portfolio of solutions for a wide range of industries, from aerospace to medical devices and consumer products to communication systems. Over its long history, TI has become synonymous with quality, reliability and innovation. Today, TI is one of the largest semiconductor companies in the world with operations in more than 30 countries across six continents.
President, CEO
Haviv Ilan
Chairman
Richard K. Templeton
Senior VP, CFO
Rafael R. Lizardi
M - Fab
Fabrication
Fab Initiation
1997
USA
South Portland
Wafer Capacity
32,000
D - FAB
1966
Dallas
42,000
D MOS - 6
2002
25,000
D MOS - 5
1995
75,000
Miho - 8
1980
Japan
Inashiki
43,000
S FAB 1
Sherman
91,000
F - FAB
2001
Germany
Freising
37,000
R Fab 1
2010
Richardson
40,000
D HC Line
1999
2,000
JV3
Aizu Wakamatsu
45,000
C - FAB
2007
China
Chengdu
30,000
L - Fab
2015
Lehi
70,000
R - Fab 2
2022
S - FAB 2
2025
S - FAB 3
2028
ST3485EBDR
STMicroelectronics
ST3485EBDR by STMicroelectronics is a Line Driver & Receiver with 3.3V power supply, EIA-422/EIA-485 interface standard, and 30ns max transmit delay. It is ideal for industrial applications requiring differential output and operates in temperatures ranging from -40 to 85°C.
LM317T
Tt Electronics Plc
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Qualification Status: Not Qualified; JESD-30 Code: R-PSFM-T3;
OPA2227UA
OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.
OPA2277UA/2K5
Burr-Brown Corporation
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
BSS138
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3.5 ohm; Maximum Drain Current (ID): .2 A; Peak Reflow Temperature (C): NOT SPECIFIED;
LM107H/883C
General Electric Solid State
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Wideband: NO;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
LL4148
General Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
MMSZ5245BT1G
Onsemi
MMSZ5245BT1G by Onsemi is a Zener diode with 15V nominal reference voltage, 8.5mA test current, and 16 ohm dynamic impedance. It is used in applications requiring precise voltage regulation in a compact SMD package for temperatures ranging from -55 to 150°C.
SMBJ18CA
Uniohm
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM555CMX
Fairchild Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
CRCW06030000Z0EAHP
Vishay Intertechnology
Vishay Intertechnology's CRCW06030000Z0EAHP is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating temp range -55 to 155 °C, it's SMT package style makes it ideal for automotive applications meeting AEC-Q200 standard.
1N4148WSF-7
Diodes Incorporated
1N4148WSF-7 by Diodes Inc. is a single silicon rectifier diode with max output current of 0.25A and max reverse voltage of 100V. It operates b/w -55 to 150°C, has a small outline package style, and is suitable for surface mount applications in various electronic circuits.
Yageo
BAV99
Lite-on Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Shanghai Lunsure Electronic Technology
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1 V; Maximum Non Repetitive Peak Forward Current: .5 A; No. of Elements: 1; Maximum Reverse Recovery Time: .004 us;
LIS3DHTR
LIS3DHTR by STMicroelectronics is a 16-terminal accelerometer with output range of 0.18-1.62V, ideal for motion sensing applications. Operating temperature ranges from -40 to 85°C, making it suitable for various environments. With a compact square package body of 3x3mm and digital voltage output type, it is commonly used in surface mount designs.
1N4148
Rectron
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Comchip Technology
PIC18F4550-I/PT
Microchip Technology
PIC18F4550-I/PT by Microchip: 8-bit microcontroller with 44 terminals, 48 MHz clock frequency, and USB connectivity. Ideal for industrial applications requiring low power mode and 10-bit ADC channels.
AD5443YRMZ
Analog Devices
AD5443YRMZ by Analog Devices is a 12-bit D/A converter with a max analog output voltage of 5V and settling time of 0.16us. Ideal for automotive applications, it operates in temperatures ranging from -40 to 125°C, making it suitable for various digital-to-analog conversion needs.
LTC2602IMS8#PBF
Linear Technology
D/A CONVERTER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: TSSOP; Package Shape: SQUARE;
AD5545CRUZ
AD5545CRUZ by Analog Devices is a 16-bit D/A converter with a max analog output voltage of ±15 V. It operates on a 5 V supply, has a settling time of 0.5 us, and offers high linearity at 0.0015%. Ideal for industrial applications requiring precise voltage outputs in compact designs.
DAC8512FSZ-REEL7
DAC8512FSZ-REEL7 by Analog Devices is a 12-bit D/A converter with max output voltage of 4.095V and linearity error of 0.0488%. Ideal for industrial applications, it operates b/w -40 to 85°C, features serial input format, and requires a nominal voltage of 5V.
PCM5102AQPWRQ1
PCM5102AQPWRQ1 by Texas Instruments is a 32-bit D/A converter with a supply voltage of 3.3V, suitable for automotive applications. It features a small outline package with 20 terminals and operates in temperatures ranging from -40 to 125°C. The device supports serial input format and consumes a max current of 32mA.
AD5755ACPZ
AD5755ACPZ by Analog Devices is a 16-bit DAC with max output voltage of ±12V, settling time of 15us, and linearity error of 0.008%. Ideal for industrial applications requiring precise analog signal generation in temperature range -40 to +105°C.
LTC1661CMS8#TRPBF
D/A CONVERTER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: TSSOP; Package Shape: SQUARE;
DAC8812IBPW
DAC8812IBPW by Texas Instruments is a 16-bit D/A converter with 0.5 us settling time, 0.0031% linearity error, and 2 MHz sample rate. Ideal for industrial applications requiring precise analog signal generation in a compact form factor.
AD5064BRUZ-1
AD5064BRUZ-1 by Analog Devices is a 16-bit D/A converter with max output voltage of 5.5V and linearity error of 0.0015%. Ideal for automotive applications, it operates b/w -40 to 125°C, with settling time of 10.7us.
AD5308BRUZ-REEL
AD5308BRUZ-REEL by Analog Devices is an 8-bit D/A converter with a max output voltage of 5.499V and settling time of 8us. Ideal for automotive applications, it operates in temperatures ranging from -40 to 125°C, with a low supply current of 1.8mA for efficient performance.
AD5627BRMZ
AD5627BRMZ by Analog Devices is a 12-bit DAC with max output voltage of 5.5V and settling time of 4.5us. Ideal for industrial applications, it operates b/w -40 to 105°C, features CMOS technology, and uses a serial input format for binary code conversion.
LTC2641IDD-12#PBF
LTC2641IDD-12#PBF by Analog Devices is a 12-bit D/A converter with max output voltage of ±2.5V, linearity error of 0.0122%, and settling time of 1us. Ideal for industrial applications requiring precise analog signal generation in compact spaces due to its small outline package and serial input format.
LTC1658IMS8#PBF
LTC1658IMS8#PBF by Analog Devices is a 14-bit D/A converter with max output voltage of 5.5V, settling time of 12us, and operates in industrial temperature range. It features a small outline package for space-constrained applications like industrial automation and instrumentation.
MAX5102BEUE+
Maxim Integrated
D/A CONVERTER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: TSSOP; Package Shape: RECTANGULAR;
DAC8571IDGKG4
DAC8571IDGKG4 by Texas Instruments is a 16-bit D/A converter with max analog output voltage of 5.5V and settling time of 15us. Ideal for industrial applications, it operates b/w -40 to 105 °C, with input format as serial and supply current at 0.4mA.
AD7564ARZ-BREEL
AD7564ARZ-BREEL by Analog Devices is a 12-bit D/A converter with 0.0244% max linearity error. It operates on 3.3/5V power supplies, settling time of 3.5us, and industrial temperature grade. Ideal for applications requiring precise analog signal generation in industrial settings.
AD5412AREZ-REEL7
AD5412AREZ-REEL7 by Analog Devices is a 12-bit D/A converter with max output voltage of ±10V. It operates in industrial temperature range (-40 to 85°C) and has settling time of 25µs. Ideal for applications requiring precise analog signal generation in compact spaces.
AD9767ASTZRL
AD9767ASTZRL by Analog Devices is a 14-bit D/A converter with max output voltage of 1.25V, EL of 0.0244%, and t_stl of 0.035us. Ideal for industrial applications requiring precise analog signal generation in temperature range -40 to 85°C.
DAC80508ZCYZFT
DAC80508ZCYZFT by Texas Instruments is a 16-bit D/A converter with max analog output voltage of 11V and settling time of 5us. Ideal for automotive applications, it features a serial input format, operates b/w -40 to 125 °C, and has a compact square package shape.
AD5541AR
AD5541AR by Analog Devices is a 16-bit D/A converter with max output voltage of 4.5V and linearity error of 0.0061%. It operates on 5V power supply, settling time of 1us, and industrial temperature grade. Ideal for applications requiring precise analog signal generation in compact spaces.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
CC2662R1FTWRGZRQ1
CC2662R1FTWRGZRQ1 by Texas Instruments is a 32-bit microcontroller with Cortex-M4F CPU, 48 MHz clock frequency, and 81920 bytes of RAM. Ideal for industrial applications, it features 8 ADC channels, 32 DMA channels, and peripherals like AES and PWM for efficient system integration.
DS160PT801ACBR
DS160PT801ACBR by Texas Instruments is a bus controller IC with 339 terminals, operating at -40 to 85°C. It supports PCI bus compatibility with a data transfer rate of 2000 MBps. This CMOS technology device has a thin profile and fine pitch package suitable for industrial applications.
DRV3255EPAPRQ1
DRV3255EPAPRQ1 by Texas Instruments is a Motion Control IC with 64 terminals, operating at -40 to 150°C. It is an AEC-Q100 compliant automotive-grade IC for Brushless DC Motor control, supporting supply voltages from 5V to 90V and output currents up to 3.5A. The package style includes a flatpack with heat sink/slug, suitable for surface mount applications in automotive systems.
TPS7A4301DGQR
TPS7A4301DGQR by Texas Instruments is an adjustable positive single output LDO regulator with a max output voltage of 14.5V and a dropout voltage of 0.6V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
UCC27284DRCR
UCC27284DRCR by Texas Instruments is a MOSFET gate driver with 2 channels, capable of handling a max output current of 3.5A. It operates in automotive-grade temperatures (-40 to 125°C) and has a turn-on/off time of 30µs. This chip carrier package with very thin profile is suitable for high side driver applications requiring fast switching speeds.
DRV8316RRGFR
DRV8316RRGFR by Texas Instruments is a motion control IC with a rectangular package and a terminal form of gull wing. It has a max output current of 8A and can operate at temperatures ranging from -40 to 125°C. This IC is commonly used as a brushless DC motor controller in automotive applications.
LMR43610MSC3RPERQ1
LMR43610MSC3RPERQ1 by Texas Instruments is a 9-terminal switching regulator with a max output voltage of 32V and max output current of 1A. Ideal for automotive applications, it operates b/w -40 to 150°C, featuring a buck switcher config and PWM control mode at up to 2200kHz frequency.
DAC121C081CIMK/NOPB
D/A CONVERTER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: TSSOP; Package Shape: RECTANGULAR;
DAC121C081CIMKX/NOPB
DAC121C081CIMKX/NOPB by Texas Instruments is a 12-bit D/A converter with max analog output voltage of 5.5V and settling time of 8.5us. Ideal for automotive applications, it operates b/w -40 to 125 °C, has a compact design with small outline and thin profile, and uses serial input format for binary code conversion.
DAC121S101CIMKX/NOPB
D/A CONVERTER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: TSSOP; Package Shape: RECTANGULAR;
National Semiconductor
D/A CONVERTER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: VSSOP; Package Shape: RECTANGULAR;
DAC121S101CIMK/NOPB
DAC161S997RGHT
DAC161S997RGHT by Texas Instruments is a 16-bit D/A converter with 3.3V supply, operating from -40 to 105°C. It features a serial input format, quad terminal position, and no-lead terminal form. Ideal for industrial applications requiring precise analog signal generation in compact spaces.
DAC124S085CIMMX/NOPB
DAC124S085CIMMX/NOPB by Texas Instruments is a 12-bit D/A converter with 5.5V max analog output voltage, 2.5MHz sample rate, and 0.1953% max linearity error. Ideal for industrial applications requiring precise analog signal generation in a compact form factor with low power consumption.
D/A CONVERTER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 10; Package Code: TSSOP; Package Shape: SQUARE;
DAC161S997RGHR
DAC161S997RGHR by Texas Instruments is a 16-bit D/A converter with 3.3V supply, operating from -40 to 105°C. It features serial input format, 0.125mA max supply current, and quad terminal position. Ideal for industrial applications requiring precise analog signal generation in compact spaces.
DAC121C085CIMMX/NOPB
DAC121C085CIMMX/NOPB by Texas Instruments is a 12-bit D/A converter with 5.5V max analog output voltage and 0.1953% max linearity error. It operates at -40 to 125 °C, suitable for automotive applications, with a sample rate of 0.18 MHz.
DAC121C081CIMK
DAC121C081CIMK by Texas Instruments is a 12-bit digital-to-analog converter (DAC) with a max analog output voltage of 5.5V. It is commonly used in automotive applications due to its small size, low power consumption, and high temperature tolerance (up to 125°C).
D/A CONVERTER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: VSSOP; Package Shape: RECTANGULAR;
DAC124S085CIMM/NOPB
DAC121C085CIMM/NOPB
DAC121C085CIMM/NOPB by Texas Instruments is a 12-bit D/A converter with 5.5V max analog output voltage and 0.1953% linearity error. Ideal for automotive applications, it operates b/w -40 to 125 °C, has a sample rate of 0.18 MHz, and consumes 0.152mA supply current.
DAC104S085CIMMX/NOPB
DAC101C081CIMK/NOPB
D/A CONVERTER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: TSOP; Package Shape: RECTANGULAR;
DAC104S085CIMM/NOPB
DAC128S085CIMTX/NOPB
D/A CONVERTER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: TSSOP; Package Shape: RECTANGULAR;
DAC124S085CIMM
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved