Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
CD4045BPWE4 by Texas Instruments is a 21-bit digital counter with a propagation delay of 5500 ns. It operates on a nominal voltage of 5V and has a max frequency of 5 MHz. This CMOS technology device is suitable for military-grade applications requiring synchronous operation and positive edge trigger type.
Median Price
-
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Digiode
Nova Conductors
Semicontronic
$5.000
$4.875
$4.850
Andel Nordic
$7.564
$7.262
Parana Technologies
$11.547
$11.957
DigiPath Technology Company
$12.715
ChromeModa Solutions
$12.974
$10.639
IDEA Electronic Components Group
$12.325
$11.677
AZTECH Wire
$13.087
One Stop Electronics
$16.000
Ampacity Inc.
$49.000
Argo Parts USA
Continental Prestige Electronics
Corphita
Aranea Global
Microchip USA
The use of plastic/epoxy material makes the package lightweight and durable, ensuring the longevity of the product.
With a high number of bits, this digital counter can handle larger count values with precision and accuracy.
Operating at a standard voltage of 5V makes it compatible with a wide range of electronic systems and applications.
The high maximum operating temperature ensures reliable performance even in harsh environmental conditions.
The high maximum frequency allows for fast counting operations, making it suitable for real-time applications.
Digital Counters CD4045BPWE4 attributes and parameters. Explore more Digital Counters devices from Texas Instruments
Count Direction:
Family:
JESD-30 Code:
Length:
Load Capacitance (CL):
Load or Preset Input:
Logic IC Type:
Maximum Frequency At Nominal Supply:
Operation Mode:
No. of Bits:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Power Supplies (V):
Propagation Delay (tpd):
Qualification:
Maximum Seated Height:
Sub-Category:
Maximum Supply Voltage (Vsup):
Minimum Supply Voltage (Vsup):
Nominal Supply Voltage / Vsup (V):
Surface Mount:
Technology:
Temperature Grade:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Trigger Type:
Width:
Minimum fmax:
CD4045BPWE4 Logic ICs trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
Texas Instruments Inc. (TI) is one of the world's leading semiconductor companies and a global leader in analog and digital signal processing technology. The company has had a major impact on the electronics industry for over 80 years, manufacturing integrated circuits (ICs), software and subsystems that leverage high-performance computing capabilities. It offers an extensive portfolio of solutions for a wide range of industries, from aerospace to medical devices and consumer products to communication systems. Over its long history, TI has become synonymous with quality, reliability and innovation. Today, TI is one of the largest semiconductor companies in the world with operations in more than 30 countries across six continents.
President, CEO
Haviv Ilan
Chairman
Richard K. Templeton
Senior VP, CFO
Rafael R. Lizardi
M - Fab
Fabrication
Fab Initiation
1997
USA
South Portland
Wafer Capacity
32,000
D - FAB
1966
Dallas
42,000
D MOS - 6
2002
25,000
D MOS - 5
1995
75,000
Miho - 8
1980
Japan
Inashiki
43,000
S FAB 1
Sherman
91,000
F - FAB
2001
Germany
Freising
37,000
R Fab 1
2010
Richardson
40,000
D HC Line
1999
2,000
JV3
Aizu Wakamatsu
45,000
C - FAB
2007
China
Chengdu
30,000
L - Fab
2015
Lehi
70,000
R - Fab 2
2022
S - FAB 2
2025
S - FAB 3
2028
SS14
Taitron Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Zetex Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BSS138NH6327XTSA2
Infineon Technologies
BSS138NH6327XTSA2 by Infineon is a N-CHANNEL FET with 60V DS Breakdown Voltage, ideal for small signal applications. Operating in Enhancement Mode, it has 0.36W Power Dissipation and 3.5 ohm Drain-Source Resistance. With Gull Wing terminals and AEC-Q101 reference standard, it's suitable for automotive electronics due to its high temperature range of -55 to 150 °C.
CRG0805F10K
Tyco Electronics Components
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
LM358DT
STMicroelectronics
LM358DT by STMicroelectronics is a dual operational amplifier with a max input offset voltage of 9000 uV. It operates at a nominal voltage of 5V and has a min voltage gain of 25000. This amplifier is commonly used in applications requiring high precision and low power consumption.
SMBJ18CA
Jgd Semiconductors
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.2 V; Maximum Repetitive Peak Reverse Voltage: 18 V;
2N7002,215
NXP Semiconductors
2N7002,215 by NXP Semiconductors is a small signal N-CHANNEL FET with a min DS breakdown voltage of 60V and max drain current of 0.3A. It is used for switching applications in enhancement mode, operates b/w -65 to 150 °C, and has a max power dissipation of 0.2W.
CRGCQ0805F10R
TE Connectivity
TE Connectivity's CRGCQ0805F10R is a 10 ohm fixed resistor with 1% tolerance and 400 ppm/°C temperature coefficient. It is a surface mount thick film resistor in an 0805 package, suitable for applications requiring precise resistance values in compact electronic circuits.
2N7002
Silicon Standard
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): .225 W; Maximum Drain-Source On Resistance: 7.5 ohm; Transistor Element Material: SILICON;
1N4148WS
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Pro-an Electronic
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Polarity: BIDIRECTIONAL; Nominal Breakdown Voltage: 21.05 V; Maximum Repetitive Peak Reverse Voltage: 18 V;
KYOCERA AVX
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Vishay Intertechnology
2N7002 by Vishay Intertechnology is a N-CHANNEL FET with 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. Ideal for SWITCHING applications due to its SINGLE configuration with BUILT-IN DIODE. Operates in ENHANCEMENT MODE, suitable for surface mount with GULL WING terminals.
MBR0520LT3G
Onsemi
MBR0520LT3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, ideal for applications requiring high-speed switching and low power loss in compact electronic devices. The package style is small outline, making it suitable for surface mount designs in various electronics.
BSS138BKW,115
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Terminal Finish: TIN; No. of Terminals: 3; Additional Features: LOGIC LEVEL COMPATIBLE;
BAV99
Bkc Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Hitano Enterprise
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Philips Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Terminal Finish: MATTE TIN; Maximum Operating Temperature: 200 Cel; Maximum Output Current: .15 A; JESD-609 Code: e3;
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; No. of Elements: 1; Transistor Application: SWITCHING;
SN74HC590ADRE4
Texas Instruments
SN74HC590ADRE4 by Texas Instruments is an 8-bit digital counter with a max frequency of 16MHz. It operates on a supply voltage range of 2-6V and has a propagation delay of 380ns. Ideal for industrial applications requiring asynchronous operation and positive edge triggering in compact designs.
SN74LV4040APW
Texas Instruments SN74LV4040APW is a 12-bit digital counter with 3-STATE output. It operates at 2V to 5.5V, with a propagation delay of 12ns and max frequency of 50MHz. Ideal for industrial applications requiring asynchronous count up operation in compact designs.
CD4516BE
CD4516BE by Texas Instruments is a 4-bit digital counter with 200 ns propagation delay and 5V nominal voltage. It features load/preset input, positive edge trigger, and bidirectional count direction. Ideal for military-grade applications requiring synchronous operation at frequencies up to 2MHz.
SN74LS193NE4
SN74LS193NE4 by Texas Instruments is a TTL digital counter with 4 bits, 47 ns propagation delay, and 25 MHz max frequency. It operates at 5V with positive edge trigger for bidirectional counting applications in commercial temperature range.
CD4022BCN
RING COUNTER; Temperature Grade: MILITARY; Terminal Form: THROUGH-HOLE; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR;
CD4017BM96G4
CD4017BM96G4 by Texas Instruments is a 10-bit digital counter with 270 ns propagation delay and 5V nominal voltage. It is used in military-grade applications, featuring positive edge trigger type and synchronous operation mode for up to 2.5 MHz frequency at nominal supply.
CD74HC40103M
Intersil
BINARY COUNTER; Temperature Grade: MILITARY; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;
CD74HCT93E
Rca Solid State
BINARY COUNTER; Temperature Grade: MILITARY; Terminal Form: THROUGH-HOLE; No. of Terminals: 14; Package Code: DIP; Package Shape: RECTANGULAR;
74HC390D,652
NXP Semiconductors' 74HC390D,652 is a digital counter with 4 functions, operating at a supply voltage of 2-6V. It features a propagation delay of 63ns and can handle load capacitance up to 50pF. Ideal for automotive applications, this CMOS technology-based device has a max frequency of 20MHz and operates in asynchronous mode.
SN74LV8154PWR
SN74LV8154PWR by Texas Instruments is a 16-bit digital counter with a propagation delay of 27 ns at 3.3V, operating in industrial temperature range. It features positive edge trigger, 3-STATE output, and synchronous operation mode, suitable for applications requiring up to 25 MHz frequency and low power consumption (0.02 mA).
CD74HC191MTG4
CD74HC191MTG4 by Texas Instruments is a 4-bit digital counter with synchronous operation. It has a max frequency of 20MHz and operates within a temperature range of -55 to 125°C. This CMOS technology device is ideal for applications requiring bidirectional counting in military-grade environments.
CD4024BCMX
BINARY COUNTER; Temperature Grade: MILITARY; Terminal Form: GULL WING; No. of Terminals: 14; Package Code: SOP; Package Shape: RECTANGULAR;
CD74HCT40103M96
Harris Semiconductor
SN74LV163APWR
SN74LV163APWR by Texas Instruments is a 4-bit digital counter with a propagation delay of 11.5 ns and operates at a max frequency of 50 MHz. It is designed for industrial applications requiring synchronous operation, positive edge triggering, and a supply voltage range from 2V to 5.5V.
CD74HC193MT
CD74HC193MT by Texas Instruments is a 4-bit digital counter with a propagation delay of 46 ns and operates at a max frequency of 17 MHz. It is used in military-grade applications, featuring positive edge trigger type and synchronous operation mode for bidirectional counting.
MC14040BDG
MC14040BDG by Onsemi is a 12-bit digital counter with 3250 ns propagation delay. Operating at temperatures from -55 to 125 °C, it has a max frequency of 1.5 MHz and supports asynchronous operation. Ideal for military-grade applications requiring precise counting in compact spaces.
SN74F161AN
SN74F161AN by Texas Instruments is a 4-bit digital counter with a propagation delay of 11 ns and operates at a max frequency of 90 MHz. It has a synchronous operation mode and is ideal for applications requiring precise counting and timing functions in commercial temperature environments.
74HC6323AD-T
74HC6323AD-T by NXP Semiconductors is a digital counter with 1 function. It operates at a nominal voltage of 5V and has a max frequency of 33MHz. This small outline package is commonly used in automotive applications due to its temperature grade and moisture sensitivity level.
MC14040BDR2G
MC14040BDR2G by Onsemi is a 12-bit digital counter with 3250 ns propagation delay. Operating at -55 to 125 °C, it supports trigger type NEGATIVE EDGE and has a max frequency of 1.5 MHz. Ideal for military applications requiring asynchronous operation in small outline packages.
HEF4017BP
HEF4017BP by NXP Semiconductors is a 10-bit digital counter with a 5V nominal voltage, 280ns propagation delay, and max frequency of 6MHz. Ideal for industrial applications requiring synchronous operation and positive edge trigger type in a compact rectangular package.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
DRV8316RRGFR
DRV8316RRGFR by Texas Instruments is a motion control IC with a rectangular package and a terminal form of gull wing. It has a max output current of 8A and can operate at temperatures ranging from -40 to 125°C. This IC is commonly used as a brushless DC motor controller in automotive applications.
CC2662R1FTWRGZRQ1
CC2662R1FTWRGZRQ1 by Texas Instruments is a 32-bit microcontroller with Cortex-M4F CPU, 48 MHz clock frequency, and 81920 bytes of RAM. Ideal for industrial applications, it features 8 ADC channels, 32 DMA channels, and peripherals like AES and PWM for efficient system integration.
UCC27284DRCR
UCC27284DRCR by Texas Instruments is a MOSFET gate driver with 2 channels, capable of handling a max output current of 3.5A. It operates in automotive-grade temperatures (-40 to 125°C) and has a turn-on/off time of 30µs. This chip carrier package with very thin profile is suitable for high side driver applications requiring fast switching speeds.
DS160PT801ACBR
DS160PT801ACBR by Texas Instruments is a bus controller IC with 339 terminals, operating at -40 to 85°C. It supports PCI bus compatibility with a data transfer rate of 2000 MBps. This CMOS technology device has a thin profile and fine pitch package suitable for industrial applications.
LMR43610MSC3RPERQ1
LMR43610MSC3RPERQ1 by Texas Instruments is a 9-terminal switching regulator with a max output voltage of 32V and max output current of 1A. Ideal for automotive applications, it operates b/w -40 to 150°C, featuring a buck switcher config and PWM control mode at up to 2200kHz frequency.
DRV3255EPAPRQ1
DRV3255EPAPRQ1 by Texas Instruments is a Motion Control IC with 64 terminals, operating at -40 to 150°C. It is an AEC-Q100 compliant automotive-grade IC for Brushless DC Motor control, supporting supply voltages from 5V to 90V and output currents up to 3.5A. The package style includes a flatpack with heat sink/slug, suitable for surface mount applications in automotive systems.
TPS7A4301DGQR
TPS7A4301DGQR by Texas Instruments is an adjustable positive single output LDO regulator with a max output voltage of 14.5V and a dropout voltage of 0.6V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
CD4020BE
BINARY COUNTER; Temperature Grade: INDUSTRIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR;
BINARY COUNTER; Temperature Grade: MILITARY; Terminal Form: THROUGH-HOLE; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR;
CD4020BE by Texas Instruments is a 14-bit digital counter with a propagation delay of 160 ns and max frequency of 3.5 MHz. It operates on a nominal voltage of 5V, suitable for military-grade applications requiring asynchronous operation and negative edge triggering in CMOS technology.
General Electric Solid State
Thomson Consumer Electronics
CD4022BNSR
CD4022BNSR by Texas Instruments is an 8-bit digital counter with a propagation delay of 270 ns and max frequency of 5.5 MHz. It operates on a nominal voltage of 5V, suitable for military-grade applications requiring synchronous operation and positive edge triggering in a compact small outline package.
CD4024BM
BINARY COUNTER; Temperature Grade: MILITARY; Terminal Form: GULL WING; No. of Terminals: 14; Package Shape: RECTANGULAR; Family: 4000/14000/40000;
CD4024BM by Texas Instruments is a 7-bit digital counter with 160ns propagation delay. It operates at 5V, has a load capacitance of 50pF, and supports up to 3V min supply voltage. Ideal for military-grade applications due to its -55°C to 125°C operating temperature range and asynchronous operation mode.
CD4024BM96
CD4024BM96 by Texas Instruments is a 7-bit digital counter with 160ns propagation delay at 5V. It operates in asynchronous mode, has a max frequency of 3.5MHz, and is ideal for military-grade applications due to its temperature range of -55°C to 125°C.
CD4029BM
CD4029BM by Texas Instruments is a 4-bit digital counter with a propagation delay of 260 ns. It operates at a nominal voltage of 5V and has a max frequency of 2MHz. This CMOS technology device is ideal for military-grade applications requiring bidirectional counting in small outline packages.
CD4022BE
Rochester Electronics
RING COUNTER; Temperature Grade: MILITARY; Terminal Form: THROUGH-HOLE; No. of Terminals: 16; Package Shape: RECTANGULAR; Load or Preset Input: YES;
DIVIDE BY 8 COUNTER; Temperature Grade: INDUSTRIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR;
CD4022BE by Texas Instruments is an 8-bit digital counter with a propagation delay of 270 ns and operates at a nominal voltage of 5V. It features positive edge trigger type, synchronous operation mode, and can handle a max frequency of 2.5 MHz. Ideal for military-grade applications requiring precise counting and timing functions in electronic circuits.
CD4017BE
DECADE COUNTER; Temperature Grade: INDUSTRIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved