Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Texas Instruments ADS54J60IRMPT is a 16-bit ADC with 2 analog in channels, 1000 MHz sample rate, and 1.9V nominal voltage. Ideal for industrial applications requiring high-speed data conversion in a compact chip carrier package with very thin profile.
Median Price
$766.760
Lifecycle Status
Suppliers In-Stock
4
In-Stock Inventory
1k+
Texas Instruments
1+ parts
100+ parts
$694.050
1k+ parts
$661.000
10k+ parts
-
Digiode
$728.422
Vyrian
Chip Stock
AZTECH Wire
$11.170
Parana Technologies
$20.859
$1,937.068
$18.773
DigiPath Technology Company
$22.968
Corohmni
$23.340
ChromeModa Solutions
$23.437
$19.218
IDEA Electronic Components Group
$22.265
$21.093
Advanced Electronics
$26.996
$24.566
$22.137
Component Stockers USA
$99.990
Corphita
$690.084
Northwest PG Solutions
Native Components
Having 2 analog input channels allows for more flexibility and options in terms of signal processing and data acquisition.
Surface mount capability makes the product suitable for compact and densely populated PCB designs, saving space and improving overall layout efficiency.
With a high resolution of 16 bits, this ADC provides accurate and precise conversion of analog signals into digital data.
The wide operating temperature range allows for reliable performance in various environmental conditions, making it suitable for industrial applications.
High sample rate of 1000 MHz enables fast and efficient conversion of analog input signals, ensuring real-time data acquisition and processing.
Analog-to-Digital Converters ADS54J60IRMPT attributes and parameters. Explore more Analog-to-Digital Converters devices from Texas Instruments
Converter Type:
No. of Analog In Channels:
No. of Functions:
No. of Bits:
Output Bit Code:
Output Format:
Sample Rate:
Hold Mode:
Minimum Analog Input Voltage:
Maximum Analog Input Voltage:
Nominal Supply Voltage:
Maximum Supply Current:
Moisture Sensitivity Level (MSL):
Minimum Operating Temperature:
Maximum Operating Temperature:
Temperature Grade:
Peak Reflow Temperature:
Maximum Time At Peak Reflow Temperature:
Terminal Position:
No. of Terminals:
Terminal Form:
Terminal Pitch:
Surface Mount:
Width:
Length:
Maximum Seated Height:
Package Style:
Package Shape:
Package Code:
JESD-30 Code:
JESD-609 Code:
ADS54J60IRMPT Converters trade compliance attributes, and parameters.
ECCN
3A001.A.5.A.5
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Design/Specification - ADS54J60 Datasheet Chg 8/Aug/2019 ADS64yyy DataSheet Update 26/Jan/2017
Texas Instruments Inc. (TI) is one of the world's leading semiconductor companies and a global leader in analog and digital signal processing technology. The company has had a major impact on the electronics industry for over 80 years, manufacturing integrated circuits (ICs), software and subsystems that leverage high-performance computing capabilities. It offers an extensive portfolio of solutions for a wide range of industries, from aerospace to medical devices and consumer products to communication systems. Over its long history, TI has become synonymous with quality, reliability and innovation. Today, TI is one of the largest semiconductor companies in the world with operations in more than 30 countries across six continents.
President, CEO
Haviv Ilan
Chairman
Richard K. Templeton
Senior VP, CFO
Rafael R. Lizardi
M - Fab
Fabrication
Fab Initiation
1997
USA
South Portland
Wafer Capacity
32,000
D - FAB
1966
Dallas
42,000
D MOS - 6
2002
25,000
D MOS - 5
1995
75,000
Miho - 8
1980
Japan
Inashiki
43,000
S FAB 1
Sherman
91,000
F - FAB
2001
Germany
Freising
37,000
R Fab 1
2010
Richardson
40,000
D HC Line
1999
2,000
JV3
Aizu Wakamatsu
45,000
C - FAB
2007
China
Chengdu
30,000
L - Fab
2015
Lehi
70,000
R - Fab 2
2022
S - FAB 2
2025
S - FAB 3
2028
BAV99
Secos
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
Taitron Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WT
Jiangsu Changjiang Electronics Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Hitano Enterprise
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
M24308/2-1F
Esterline Technologies
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Option-1: HOLE .115-.125; Mounting Type: CABLE AND PANEL; Mating Contact Finish: NOT SPECIFIED;
Zowie Technology
RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Operating Temperature: 125 Cel; No. of Elements: 1; Maximum Non Repetitive Peak Forward Current: 30 A;
B340A-13-F
SPC TECHNOLOGY/ MULTICOMP
OPA2227UA
OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.
DS18B20Z+
Analog Devices
DS18B20Z+ by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
LM107H
Raytheon Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Low-Offset: NO;
43025-0400
Molex
The Molex 43025-0400 is a board connector with 4 contacts, 2 rows, and a mating contact pitch of 0.118". It has a body length of 0.27", insulation resistance of 1Gohm, and operates b/w -40 to 105°C. Ideal for commercial applications requiring a female connector with crimp termination and UL94V-0 flammability rating.
2N7002
Lite-on Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Qualification: Not Qualified; Additional Features: LOW THRESHOLD; Minimum DS Breakdown Voltage: 60 V;
MBRS130LT3G
Onsemi
MBRS130LT3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.445V. It operates b/w -65 to 125°C, has a reverse test voltage of 30V, and is ideal for power applications due to its small outline package style.
1N4148WS
Sensitron Semiconductor
BSS138
NXP Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; No. of Terminals: 3; Maximum Drain Current (ID): .2 A; Operating Mode: ENHANCEMENT MODE;
NDT2955
NDT2955 by Onsemi is a P-CHANNEL FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max IDM of 15A and EAS of 174mJ, suitable for ENHANCEMENT MODE operation. With a compact SMALL OUTLINE package and -55 to 150 °C operating range, it offers efficient power dissipation up to 3W.
2N2222A
Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
CDSOT23-SM712
Bourns
Bourns CDSOT23-SM712 is a bidirectional Transient Voltage Suppressor diode with 400W peak power dissipation and 20uA reverse current. Ideal for surge protection in applications requiring a max clamping voltage of 14V, such as IEC-61000-4-2 compliant systems. Operates b/w -55°C to 150°C with matte tin finish and Gull Wing terminals.
Electronic Transistors
ADS1114IDGSR
The Texas Instruments ADS1114IDGSR is a 16-bit ADC with 1 analog input channel, operating at a sample rate of 0.00086 MHz. Ideal for automotive applications, it has a max linearity error of 0.0015%, operates on 3.3V power supply, and features a serial output format.
ADS5444IPFP
The Texas Instruments ADS5444IPFP is a 13-bit ADC with 0.0269% EL, 250 MHz sample rate, and 390 mA max supply current. Ideal for industrial applications, it features a 3.3/5V power supply, -40 to 85°C operating temp range, and GULL WING terminals in a square package.
ADS1252U/2K5
Burr-Brown Corporation
ADC, DELTA-SIGMA; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
AD7794CRUZ-REEL
AD7794CRUZ-REEL by Analog Devices is a 24-bit ADC with 6 analog in channels, 0.0015% max linearity error, and operates on 3/5V. Ideal for automotive applications due to its CMOS technology, it offers serial output format and small outline package style.
ADS8344EB/2K5
ADC, SUCCESSIVE APPROXIMATION; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 20; Package Shape: RECTANGULAR; Sample Rate: .1 MHz;
LTC2440CGN#PBF
LTC2440CGN#PBF by Analog Devices is a 24-bit ADC with a sample rate of 0.35 MHz. It has a max linearity error of 0.0015% and can operate in temperatures ranging from 0 to 70 °C. This converter is commonly used in applications requiring high-resolution analog-to-digital conversion.
ADS8320EB/2K5
The Texas Instruments ADS8320EB/2K5 is a 16-bit ADC with 0.012% EL, 3/5V supplies, and 0.1 MHz sample rate. Ideal for industrial applications, it features a small outline package, operates from -40 to 85°C, and has a max conversion time of 666.67 us.
MAX11613EUA+
Analog Devices' MAX11613EUA+ is a 12-bit ADC with 4 analog in channels, 0.0244% EL, and 3/3.3V power supplies. Ideal for industrial applications, it features a small outline package with dual terminals and operates b/w -40 to 85°C.
LTC2484IDD#PBF
LTC2484IDD#PBF by Analog Devices is a 24-bit ADC with 0.001% EL, ideal for industrial applications. It operates b/w -40 to 85 °C, has a sample rate of 0.0000075 MHz, and outputs data in serial format. With a small outline package and dual terminals, it offers precise analog-to-digital conversion for various electronic systems.
AD7923BRUZ-REEL7
AD7923BRUZ-REEL7 by Analog Devices is a 12-bit ADC with 4 analog in channels, 0.0244% max linearity error, and 0.8us conversion time. Ideal for automotive applications due to its small outline package and 2.5V max analog input voltage requirement.
ADS1220IRVAT
Texas Instruments ADS1220IRVAT is a 24-bit ADC with 4 analog in channels, operating at 3.3V. It features 0.0015% linearity error, 0.002 MHz sample rate, and -40 to 125°C temperature range. Ideal for automotive applications due to its compact size and low power consumption of 0.49 mA.
ADC121S101CIMF/NOPB
Texas Instruments ADC121S101CIMF/NOPB is a 12-bit ADC with 0.0244% EL, 1 MHz sample rate, and 3.2 mA max supply current. Ideal for automotive applications due to AEC-Q100 screening, it operates b/w -40 to 125°C with a small outline package style.
ADC128S102CIMT/NOPB
National Semiconductor
Analog to Digital Converters; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: TSSOP; Package Shape: RECTANGULAR;
MCP3421A3T-E/CH
Microchip Technology
MCP3421A3T-E/CH by Microchip is an 18-bit ADC with 0.0035% EL, 2.048V max analog input voltage, and 0.00024 MHz sample rate. Ideal for industrial applications requiring precise analog-to-digital conversion in a compact package with 6 terminals and serial output format.
ADS1148QPWRQ1
ADS1148QPWRQ1 by Texas Instruments is a 16-bit ADC with 8 analog in channels, 0.0015% EL, and 0.002 MHz sample rate. Ideal for automotive applications due to AEC-Q100 screening, it operates at -40 to 125 °C with a small outline package style. Terminal finish is nickel palladium gold with dual position terminals.
MCP3208-BI/P
MCP3208-BI/P by Microchip Technology is a 12-bit ADC with 8 analog input channels. It operates at a max temperature of 85°C and has a sample rate of 0.1 MHz. This converter is commonly used in industrial applications for accurate analog-to-digital conversion.
LTC2452CTS8#TRMPBF
LTC2452CTS8#TRMPBF by Analog Devices is a 16-bit ADC with 0.0153% EL, 23000 us conversion time, and 0-70°C operating temp. Ideal for applications requiring high precision analog-to-digital conversion in compact designs.
Linear Technology
ADC, DELTA-SIGMA; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: VSSOP; Package Shape: RECTANGULAR;
5962-8969801LX
Analog Devices' 5962-8969801LX is a 10-bit ADC with 0.0977% linearity error, suitable for military applications. It features 2 analog in channels, operates b/w -55 to 125 °C, and has a conversion time of 18.5 us. The package style is in-line with TIN LEAD terminal finish and CMOS technology.
AD7663ASTZRL
AD7663ASTZRL by Analog Devices is a 16-bit ADC with 4 analog input channels, 0.0046% max linearity error, and 0.25 MHz sample rate. It is ideal for industrial applications requiring precise analog-to-digital conversion in a compact square package with low profile and fine pitch terminals.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
DRV8316RRGFR
DRV8316RRGFR by Texas Instruments is a motion control IC with a rectangular package and a terminal form of gull wing. It has a max output current of 8A and can operate at temperatures ranging from -40 to 125°C. This IC is commonly used as a brushless DC motor controller in automotive applications.
LMR43610MSC3RPERQ1
LMR43610MSC3RPERQ1 by Texas Instruments is a 9-terminal switching regulator with a max output voltage of 32V and max output current of 1A. Ideal for automotive applications, it operates b/w -40 to 150°C, featuring a buck switcher config and PWM control mode at up to 2200kHz frequency.
DRV3255EPAPRQ1
DRV3255EPAPRQ1 by Texas Instruments is a Motion Control IC with 64 terminals, operating at -40 to 150°C. It is an AEC-Q100 compliant automotive-grade IC for Brushless DC Motor control, supporting supply voltages from 5V to 90V and output currents up to 3.5A. The package style includes a flatpack with heat sink/slug, suitable for surface mount applications in automotive systems.
UCC27284DRCR
UCC27284DRCR by Texas Instruments is a MOSFET gate driver with 2 channels, capable of handling a max output current of 3.5A. It operates in automotive-grade temperatures (-40 to 125°C) and has a turn-on/off time of 30µs. This chip carrier package with very thin profile is suitable for high side driver applications requiring fast switching speeds.
TPS7A4301DGQR
TPS7A4301DGQR by Texas Instruments is an adjustable positive single output LDO regulator with a max output voltage of 14.5V and a dropout voltage of 0.6V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
CC2662R1FTWRGZRQ1
CC2662R1FTWRGZRQ1 by Texas Instruments is a 32-bit microcontroller with Cortex-M4F CPU, 48 MHz clock frequency, and 81920 bytes of RAM. Ideal for industrial applications, it features 8 ADC channels, 32 DMA channels, and peripherals like AES and PWM for efficient system integration.
DS160PT801ACBR
DS160PT801ACBR by Texas Instruments is a bus controller IC with 339 terminals, operating at -40 to 85°C. It supports PCI bus compatibility with a data transfer rate of 2000 MBps. This CMOS technology device has a thin profile and fine pitch package suitable for industrial applications.
ADS5294IPFPT
Texas Instruments ADS5294IPFPT is a 14-bit ADC with 8 analog channels, 80 MHz sample rate, and 0.0336% linearity error. Ideal for industrial applications, it operates b/w -40 to 85°C, has a 1.8V supply voltage, and uses CMOS technology. The package style includes flatpack and thin profile options for versatile mounting in various systems.
ADS52J90ZZE
The Texas Instruments ADS52J90ZZE is a 14-bit ADC with 16 analog input channels, operating at a sample rate of 65 MHz. It features a max linearity error of 0.0183% and is suitable for industrial applications requiring high-speed and accurate analog-to-digital conversion. The package style is grid array, low profile, fine pitch, making it ideal for space-constrained designs.
ADS5562IRGZT
Texas Instruments ADS5562IRGZT is a 16-bit ADC with 0.013% EL, 80 MHz sample rate, and 3.6V max analog input voltage. Ideal for industrial applications requiring high-speed data conversion in a compact chip carrier package.
ADS5562IRGZTG4
ADC, PROPRIETARY METHOD; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE;
ADS5294IPFPR
ADC, PROPRIETARY METHOD; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 80; Package Code: HTFQFP; Package Shape: SQUARE;
ADS5400IPZPR
ADC, PROPRIETARY METHOD; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 100; Package Code: HTFQFP; Package Shape: SQUARE;
ADS5560IRGZTG4
ADS5400IPZP
ADS5407IZAY
The Texas Instruments ADS5407IZAY is a 12-bit ADC with 2 analog in channels, operating at a sample rate of 500 MHz. It features a max linearity error of 0.1221% and supports power supplies of 1.8V and 3.3V. Ideal for industrial applications requiring high-speed and accurate analog-to-digital conversion in a compact package with low profile design.
ADS5560IRGZT
ADS5407IZAYR
ADC, PROPRIETARY METHOD; Temperature Grade: INDUSTRIAL; Terminal Form: BALL; No. of Terminals: 196; Package Code: LFBGA; Package Shape: SQUARE;
ADS5562IRGZR
ADS5562IRGZRG4
ADS5296ARGCT
ADC, PROPRIETARY METHOD; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 64; Package Code: VQCCN; Package Shape: SQUARE;
ADS5270IPFP
ADS54J40IRMP
ADC, PROPRIETARY METHOD; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 72; Package Code: HVQCCN; Package Shape: SQUARE;
ADS54J40IRMPR
ADC, PROPRIETARY METHOD; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 72; Package Code: VQCCN; Package Shape: SQUARE;
ADS54J40IRMPT
ADS5500MPAPEP
ADC, PROPRIETARY METHOD; Temperature Grade: MILITARY; Terminal Form: GULL WING; No. of Terminals: 64; Package Code: HTFQFP; Package Shape: SQUARE;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved