Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TE Connectivity's 5227755-2 is a BNC connector with bayonet coupling type and glass filled polybutylene terephthalate insulator material. It has a max operating temperature of 85°C and can handle frequencies up to 4 GHz. This RF connector is commonly used in panel-mounted applications requiring a 50 ohm characteristic impedance.
Median Price
$3.038
Lifecycle Status
Suppliers In-Stock
20
In-Stock Inventory
1k+
RS Americas
1+ parts
$1.020
100+ parts
-
1k+ parts
10k+ parts
Arrow
$1.956
$1.596
Farnell
$2.350
$1.890
Master Electronics
$2.387
$2.170
$2.020
$1.960
Chip1Stop
$2.650
Element14
$2.835
$2.269
TE Connectivity
$3.570
$3.160
$2.880
Newark
$3.980
$2.410
$2.370
RS (Exports)
$4.400
Mouser Electronics
$4.440
$2.840
$2.440
DigiKey
$4.780
$3.449
$2.931
$2.748
Powell Electronics
$8.364
$4.337
PEI Genesis
Verical
Digiode
$0.969
Nova Conductors
$2.246
VNN
Vyrian
Electro Sonic
$3.470
$2.190
IBS Electronics
$3.100
$2.903
$2.090
Corphita
$0.918
Argo Parts USA
Continental Prestige Electronics
$2.202
Aztec Data Supply Inc.
$8.857
Andel Nordic
$556.826
$534.552
Perfect Parts
Kepictronics
Glotronic Ltd.
Assy Fe
Bayonet coupling provides quick and secure connection, making it easy to connect and disconnect the BNC connectors efficiently.
The use of glass filled polybutylene terephthalate as insulator material ensures high durability and resistance to high temperatures, making the connectors reliable for long-term use.
With a high maximum operating temperature of 85 °C, these connectors can withstand demanding operating conditions without compromising performance.
The low minimum operating temperature of -55 °C allows the connectors to function effectively in extreme cold environments.
Nickel shell finish provides corrosion resistance and ensures a longer lifespan for the connectors, making them suitable for a variety of applications.
RF BNC connectors are suitable for a wide range of radio frequency applications, ensuring compatibility and reliability in various systems.
The characteristic impedance of 50 ohm ensures optimal signal transfer and minimizes signal loss, making these connectors ideal for high-frequency applications.
Zinc alloy shell material provides strength and durability to the connectors, ensuring long-lasting performance in challenging environments.
Solder termination offers a secure and reliable connection, ensuring stable signal transmission and reducing the risk of signal interference.
With a high maximum operating frequency of 4 GHz, these connectors can handle high-frequency signals effectively, making them suitable for demanding communication systems.
BNC Connectors 5227755-2 attributes and parameters. Explore more BNC Connectors devices from TE Connectivity
Body or Shell Style:
Characteristic Impedance:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Coupling Type:
DIN Conformance:
EMI Shielded:
Empty Shell:
Filter Feature:
IEC Conformity:
Insulator Material:
MIL Conformity:
Mains Connector Rating:
Mixed Contacts:
Mounting Style:
Mounting Type:
No. of Connectors:
No. of Ports:
Maximum Operating Frequency:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
Panel Mount:
Shell Finish:
Shell Material:
Termination Type:
Total No. of Contacts:
5227755-2 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.10
SB
TE Connectivity is a global leader in the design and production of innovative connectors and sensors for multiple industries, such as automotive, industrial equipment, data communication systems, aerospace, defense, medical, oil and gas, consumer electronics and energy. It is an American-Swiss domiciled firm that has been providing high-quality products to its customers since 1907.
CEO
Terrence R. Curtin
Executive VP, CFO
Heath A. Mitts
Senior VP, Principal Accounting Officer
Robert J. Ott
EU2B-YS303C
Idec
ROTARY SWITCH;
2N7002
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 7.5 ohm; Maximum Drain Current (Abs) (ID): .115 A;
2N2222A
Bharat Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM358AN
Signetics
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
BAV99
Diotec Semiconductor Ag
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Kec
Baneasa S A
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; Qualification: Not Qualified;
1N4148
Invensys Sensor Systems
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Repetitive Peak Reverse Voltage: 100 V;
Shanghai Lunsure Electronic Technology
Lite-on Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Gulf Semiconductor
2N7002,215
NXP Semiconductors
2N7002,215 by NXP Semiconductors is a small signal N-CHANNEL FET with a min DS breakdown voltage of 60V and max drain current of 0.3A. It is used for switching applications in enhancement mode, operates b/w -65 to 150 °C, and has a max power dissipation of 0.2W.
PIC18F4550-I/ML
Microchip Technology
The Microchip Technology PIC18F4550-I/ML is an 8-bit microcontroller with a max clock frequency of 48 MHz. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it ideal for industrial applications requiring high-speed data processing and analog-to-digital conversion. With low power mode and flash ROM programmability, this chip offers efficient performance in compact designs.
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Time At Peak Reflow Temperature (s): 30; Transistor Application: SWITCHING; Package Body Material: PLASTIC/EPOXY;
LM358MX
Texas Instruments
LM358MX by Texas Instruments is a dual operational amplifier with a max input offset voltage of 9000 uV. It has a nominal voltage of 5V and a min voltage gain of 15000. This op amp is commonly used in applications requiring amplification and signal conditioning.
LM555CM
Renesas Electronics
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Philips Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Maximum Output Current: .1 A; Peak Reflow Temperature (C): 260; Terminal Finish: MATTE TIN; Maximum Reverse Recovery Time: .006 us;
ERJ2RKF1002X
Panasonic
Panasonic's ERJ2RKF1002X is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and operating temperature range of -55 to 155 °C.
BSS123NH6327XTSA1
Infineon Technologies
Infineon BSS123NH6327XTSA1 is a N-CHANNEL FET with 100V DS breakdown voltage, 0.19A ID, and 6 ohm RDS(on). Ideal for small outline applications requiring high drain current and low on-resistance. AEC-Q101 compliant for automotive use.
EEAGA1H4R7
Panasonic EEAGA1H4R7 is a 4.7uF, 50V Aluminum Electrolytic Capacitor with 0.1 Tan Delta and 0.003mA Leakage Current. Ideal for applications requiring high ripple current handling in temperatures ranging from -55 to 105°C.
1-1634622-0
TE Connectivity 1-1634622-0 is a BNC Connector with body dimensions of 0.579" x 0.622" x 0.622". It has an insulation resistance of 5G ohm, operates b/w -55°C to 85°C, and supports RG Coax Cable. Ideal for RF applications up to 2GHz, it features a bayonet coupling type and polyethylene insulator material.
R141426161
Radiall S A
R141426161 BNC Connector by Radiall S A features a body length of 0.472", insertion loss of 0.03 dB, and insulation resistance of 5000000000 ohm. Ideal for RF applications, this connector has a bayonet coupling type and operates b/w -35 to 70°C with a max frequency of 1.5 GHz.
227699-2
TE Connectivity's 227699-2 BNC Connector features 50 ohm impedance, tin termination, and glass-filled polybutylene terephthalate insulator. Ideal for RF applications up to 4 GHz with a durability of 500 cycles. Suitable for commercial use in board mounting configurations.
5413194-1
TE Connectivity's 5413194-1 BNC Connector features bayonet coupling, polymethylpentene insulator, and 75 ohm impedance. Ideal for RF applications up to 4 GHz, this right-angle jack connector with solder termination is UL certified for commercial use.
5414907-1
TE Connectivity's 5414907-1 BNC Connector features a bayonet coupling type, polymethylpentene insulator, and 75 ohm characteristic impedance. Ideal for RF applications with a max operating frequency of 2 GHz, this connector has a durable zinc alloy shell and is rated for 500 cycles at temperatures ranging from -55 to 85°C.
000-69475
Amphenol
RF BNC CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
4160
Pomona Electronics
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; MIL Conformity: NO; JESD-609 Code: e4;
73101-0040
Molex
Molex 73101-0040 RF BNC Connector features 75 ohm impedance, 0.2 dB insertion loss, and 1.3 VSWR. Ideal for commercial applications requiring a durable connector with a characteristic impedance of 75 ohm, suitable for frequencies up to 4 GHz. This right-angle receptacle connector is designed for board and panel mounting with solder termination.
CPMC7818
Cinch Connectivity Solutions
CPMC7818 by Cinch Connectivity Solutions is a BNC Connector with gold termination, bayonet coupling, and polymethylpentene insulator. Ideal for RF applications up to 2 GHz, it features crimp/solder termination and 75 ohm impedance for male connectors on cables.
5225395-6
TE Connectivity's 5225395-6 RF BNC Connector features 0.2 dB insertion loss, 50 ohm impedance, and 4 GHz max operating frequency. Ideal for applications requiring MIL conformity, it is a bayonet-coupled plug with fluoropolymer insulator for temperatures ranging from -55 to 85°C. Suitable for RG 142B/A cables in various setups.
5227222-2
TE Connectivity's 5227222-2 BNC Connector features a body length of 0.581", insulation resistance of 5G ohm, and termination contact finish in Tin. Ideal for RF applications with a characteristic impedance of 50 ohm, this connector has a max operating frequency of 4 GHz and durability up to 500 cycles.
5227754-3
TE Connectivity's 5227754-3 BNC Connector features Bayonet coupling, Glass Filled Polybutylene Terephthalate insulator, and 50 ohm impedance. Ideal for RF applications up to 4 GHz with female contact gender and solder termination.
73104-0
RF BNC CONNECTOR;
4488
The Pomona Electronics 4488 is a BNC connector with gold termination, nickel shell finish, and brass shell material. It has a body diameter of 0.571" and is ideal for RF applications with characteristic impedance of 50 ohm. This male plug connector is designed for RG-55 cable mounting using clamp solder termination.
112596
Amphenol 112596 is a BNC connector with bayonet coupling, suitable for RF applications. Features include 50 ohm impedance, acetal insulator, and male contact gender. Ideal for cable mounting with crimp/solder termination in right angle plug style.
R141665161W
R141665161W by Radiall S A is a BNC Connector with Bayonet coupling, Polypropylene insulator, and 50 ohm impedance. Ideal for RF applications up to 1.5 GHz, it features a female contact gender, solder termination, and right-angle mounting on boards. Operating temperatures range from -35°C to 70°C.
112134
Amphenol 112134 is a BNC connector with gold termination, bayonet coupling, and acetal insulator. It has a 50 ohm impedance and is suitable for RG-174/U cables in RF applications. The connector features a zinc alloy shell, gold mating contacts, and is designed for commercial reliability.
M39012/20-0101
Kings Electronics
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Body or Shell Style: PLUG; Filter Feature: NO; Insulator Material: POLYTETRAFLUOROETHYLENE;
BNC7T-J-P-GN-ST-TH1
Samtec
Samtec's BNC7T-J-P-GN-ST-TH1 is a RF BNC connector with gold termination, bayonet coupling, and PTFE insulator. Ideal for 6 GHz applications, it features 75 ohm impedance, solder termination, and female contact gender for high-frequency board mounting needs.
D-621-0036
TE Connectivity's D-621-0036 is a BNC connector with bayonet coupling, PES insulator, and max temp of 125°C. Ideal for RF applications, it has a polarized key, solder termination, and female contact gender. Suitable for cable and panel mounting in 115/230VAC systems.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
5227677-1
TE Connectivity's 5227677-1 RF BNC Connector features a body length of 0.581", insulation resistance of 5G ohm, and max operating frequency of 4GHz. Ideal for applications requiring a durable, right angle panel mount connector with a characteristic impedance of 50 ohm.
5227699-3
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Connectors: ONE; Body Depth: .625 inch; Mixed Contacts: NO;
5227161-7
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Termination Contact Finish: NOT APPLICABLE;
5227161-9
TE Connectivity's 5227161-9 BNC Connector features a body length of 0.581", insulation resistance of 5G ohm, and bayonet coupling type. Ideal for RF applications with a max operating frequency of 4GHz, this connector has a durable zinc alloy shell, black insulator color, and female contact gender.
5227726-2
TE Connectivity's 5227726-2 BNC Connector is a bayonet coupling type, with a maximum operating temperature of 85°C and a minimum of -55°C. Its insulator material is glass-filled polybutylene terephthalate. This RF BNC connector has one port and a characteristic impedance of 50 ohm. It is suitable for general-purpose applications and can handle a maximum operating frequency of 4 GHz.
5227161-1
5227222-3
Tyco Electronics Amp
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Termination Type: SOLDER; Mounting Type: BOARD AND PANEL; Body or Shell Style: JACK;
TE Connectivity's 5227222-3 BNC Connector features 0.581" body length, 0.2 dB insertion loss, and 5000000000 ohm insulation resistance. Ideal for RF applications with a max operating frequency of 4 GHz, this connector has a straight mounting style and is suitable for commercial use.
5227161-3
TE Connectivity's 5227161-3 BNC Connector is a right angle jack with a body length of 0.625", width of 0.581", and depth of 0.625". It has a characteristic impedance of 50 ohm and can operate at temperatures ranging from -55 to 85°C. This connector is commonly used in RF applications up to 4 GHz.
5227699-2
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; DIN Conformance: NO;
5227754-2
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Connectors: ONE; No. of Ports: 1; Mounting Option-1: DETENT;
5227222-6
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Type: BOARD AND PANEL; Mounting Style: STRAIGHT; IEC Conformity: NO;
TE Connectivity's 5227222-6 BNC Connector features a body length of 0.581", insulation resistance of 5G ohm, and max operating frequency of 4GHz. Ideal for RF applications, this female connector with a jack shell style is designed for durability with 500 cycles and operates in temperatures ranging from -55 to 85°C.
5227726-3
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Connectors: ONE; Insulator Material: GLASS FILLED POLYBUTYLENE TEREPHTHALATE; Coupling Type: BAYONET;
5227726-1
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Connectors: ONE; Total No. of Contacts: 1; Contact Material: NOT SPECIFIED;
5227673-1
TE Connectivity's 5227673-1 BNC Connector features a body length of 0.625", insulation resistance of 5G ohm, and max operating frequency of 4 GHz. Ideal for RF applications, this connector has a bayonet coupling type and is made with polymethylpentene insulator material.
5227426-1
TE Connectivity's 5227426-1 BNC Connector features 0.7" body diameter, 0.2 dB insertion loss, and 5000000000 ohm insulation resistance. Ideal for RF applications with a characteristic impedance of 50 ohm and max operating frequency of 4 GHz.
5227699-1
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Connectors: ONE; Mounting Type: PANEL; MIL Conformity: NO;
5227222-1
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Characteristic Impedance: 50 ohm; Body or Shell Style: JACK; IEC Conformity: NO;
TE Connectivity 5227222-1 is a BNC Connector with 0.581" body length, 5000000000 ohm insulation resistance, and 50 ohm impedance. Ideal for RF applications up to 4 GHz, it features a bayonet coupling type and PBT-POLYESTER insulator material. Suitable for commercial use in panels with solder termination.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved