Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
PTC THERMISTOR; Mounting Type: SURFACE MOUNT; Rated Power Dissipation (P): 1.2 W; Maximum Operating Temperature: 85 Cel; Terminal Shape: FLAT; Terminal Finish: TIN LEAD;
Median Price
$0.542
Lifecycle Status
Suppliers In-Stock
15
In-Stock Inventory
1k+
Freelance Electronics
1+ parts
$0.183
100+ parts
$0.192
1k+ parts
$0.181
10k+ parts
-
Component Electronics Inc.
$0.460
$0.350
$0.300
Voyager Components
$0.623
Bristol Electronics
$0.750
$0.278
$0.195
Lantek
R&J Components
Resion
PC Components Company LLC
Prism Electronics
LWI Electronics Inc
Dan-Mar Components
LIBRA Elektronik GmbH
Mil-Aero Solutions, Inc.
Connector Distribution Corp
Right Parts Inc.
Perfect Parts
Assy Fe
Cyclops Electronics Ltd (Excess)
Kepictronics
GreenTree Electronics
Non-linear Resistors SMD100-2018-2 attributes and parameters. Explore more Non-linear Resistors devices from TE Connectivity
Additional Features:
JESD-609 Code:
Manufacturer Series:
Mounting Type:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Shape (Package):
Rated Power Dissipation (P):
Resistor Type:
Sub-Category:
Terminal Finish:
Terminal Placement:
Terminal Shape:
Thermistor Application:
SMD100-2018-2 Resistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8533.40.80.70
SB
8533.40.00.80
TE Connectivity is a global leader in the design and production of innovative connectors and sensors for multiple industries, such as automotive, industrial equipment, data communication systems, aerospace, defense, medical, oil and gas, consumer electronics and energy. It is an American-Swiss domiciled firm that has been providing high-quality products to its customers since 1907.
CEO
Terrence R. Curtin
Executive VP, CFO
Heath A. Mitts
Senior VP, Principal Accounting Officer
Robert J. Ott
SMBJ18CA
Good-ark Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Maximum Time At Peak Reflow Temperature (s): 10; JESD-609 Code: e3;
MBR0520LT1G
Onsemi
MBR0520LT1G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, has a peak reflow temperature of 260°C, and a repetitive peak reverse voltage of 20V. This diode is ideal for applications requiring high-speed switching in compact electronic devices.
PAP-06V-S
J S T Mfg
PAP-06V-S by J S T Mfg is a 6-contact BOARD CONNECTOR with 94V-0 UL Flammability Code. It has FEMALE contacts, CRIMP termination, and comes WITH CABLE ASSEMBLY for CABLE mounting applications.
USB2514BI-AEZG
Microchip Technology
USB2514BI-AEZG by Microchip is a BUS CONTROLLER IC with 36 terminals, operating at 3.3V, supporting I2C, SMBUS, and USB buses. It has a clock frequency of up to 24MHz and can withstand industrial temperatures from -40°C to 85°C. This chip carrier package is surface mountable and suitable for various applications requiring USB connectivity.
BAV99
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
PIC18F4550-I/P
PIC18F4550-I/P by Microchip Technology is an 8-bit microcontroller with a max clock frequency of 48 MHz. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it ideal for industrial applications requiring low power consumption and high-speed data processing. With 2048 RAM bytes and 256 Data EEPROM size, this CMOS technology-based microcontroller offers versatile performance in various embedded systems.
Yangzhou Yangjie Electronics
USB3320C-EZK-TR
Microchip Technology's USB3320C-EZK-TR is a Bus Controller IC with 32 terminals, operating at 1.6-2V. It supports USB bus compatibility, clock frequency up to 60MHz, and CMOS technology. Ideal for applications requiring Universal Serial Bus peripherals in compact designs with low power consumption.
SS14
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAT54C-7-F
Diodes Incorporated
BAT54C-7-F by Diodes Inc. is a Schottky rectifier diode with common cathode, 2 elements, and max forward voltage of 0.24V. Ideal for applications requiring fast reverse recovery time of 0.005 us, such as in small outline packages for surface mount technology at temperatures ranging from -65 to 150°C.
CRCW06031K00FKEAHP
Vishay Intertechnology
Vishay Intertechnology's CRCW06031K00FKEAHP is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.33 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance and operating voltage of 75 V.
LM2931AZ-5.0RAG
LM2931AZ-5.0RAG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V nominal output voltage, 0.1A max output current, and 0.6V max dropout voltage. Ideal for applications requiring stable voltage regulation in temperature-sensitive environments up to 150°C.
Brightking
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
North American Philips Discrete Products Div
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
261
Micronetics
Other Interface ICs; Temperature Grade: MILITARY; Terminal Form: FLAT; No. of Terminals: 14; Package Code: DFP; Package Shape: SQUARE;
LD1117S33CTR
STMicroelectronics
STMicroelectronics LD1117S33CTR is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1.3A. It operates within an input voltage range of 4.75V to 15V, making it suitable for various applications requiring stable voltage regulation in compact designs. The device features low dropout voltage of 1.3V, high temperature operation up to 125°C, and small outline package style for space-constrained PCB layouts.
ABS10-32.768KHZ-T
Abracon
Abracon's ABS10-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and wearables due to its compact size and low power consumption.
ATMEGA328P-AU
ATMEGA328P-AU by Microchip: 8-bit RISC CPU, 20 MHz clock, 23 I/O lines. Ideal for industrial applications with SPI, TWI, USART connectivity and low power mode. Features include 2048 RAM bytes, 1024 EEPROM size, and 16384 ROM words.
1N4148WT
1N4148WT by Onsemi is a single rectifier diode with a max output current of 0.3A and forward voltage of 0.72V. It has a small outline package style, matte tin terminal finish, and operates at temperatures up to 150°C. Ideal for applications requiring fast reverse recovery time such as power supplies and signal demodulation circuits.
2N7002
Samsung
N-CHANNEL AND P-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 5 ohm; No. of Terminals: 3;
RXEF010S
Littelfuse
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Maximum Operating Temperature: 85 Cel; JESD-609 Code: e3; Rated AC Voltage (URac): 60 V; Terminal Finish: Tin (Sn);
B72214-S321-K101
TDK
The TDK B72214-S321-K101 varistor has a max energy absorption of 84J, operating voltage of 420V, and rated power dissipation of 0.6W. Ideal for surge protection in applications requiring non-linear resistors with radial terminal placement and disk package shape.
NTHS1206N01N1003JE
Vishay Intertechnology's NTHS1206N01N1003JE is a NTC thermistor with 100k ohm resistance, 5% tolerance, and 0.28W power dissipation. Ideal for temperature compensation applications, it operates b/w -40°C to 125°C with thermal sensitivity index of 3974K. This surface mount device features dual-ended terminals in a rectangular package.
B59955C0120A070
The TDK B59955C0120A070 is a PTC thermistor with resistance of 0.8 ohm, rated for 30V AC/DC. It is used for overcurrent protection in radial disk package, operating b/w -40°C to 125°C. Ideal for through-hole mounting applications requiring high temperature tolerance and strip pack packaging.
RF1403-000
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .15 ohm; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel; Terminal Finish: MATTE TIN OVER NICKEL;
MF-SM100-2
Bourns
The Bourns MF-SM100-2 is a PTC resettable fuse with resistance of 0.12 ohm and operating voltage of 30V. It is used for overcurrent protection in applications requiring dual-ended terminal placement and surface mounting type. The rectangular package measures 7.98mm x 5.44mm x 3mm, suitable for various electronic devices meeting AEC-Q200, CUL, TUV, and UL standards.
55015
Measurement Specialties
NTC THERMISTOR; No. of Terminals: 2;
1206L050YR
1206L050YR by Littelfuse is a PTC resettable fuse with a resistance of 0.15 ohm. It is used for overcurrent protection and has dual-ended terminal placement. This surface mount thermistor operates at temperatures ranging from -40 to 85 °C.
NCP15WF104F03RC
Murata Manufacturing
Murata Manufacturing's NCP15WF104F03RC is a Non-linear Resistor with 100000 ohm resistance, 1% tolerance, and 5V operating voltage. It is used for TEMPERATURE SENSING applications due to its high thermal sensitivity index of 4250 K and wide temperature range from -40°C to 125°C. The thermistor features dual-ended terminals in a surface mount package style for easy installation.
V5.5MLA0805LNHAUTO
V5.5MLA0805LNHAUTO by Littelfuse is a VARISTOR with 5.5V operating voltage, 0.1J energy absorption, and 4V RMS circuit voltage. Ideal for automotive applications due to AEC-Q200 standard compliance and surface mounting type.
RUEF135
TE Connectivity
TE Connectivity's RUEF135 is a PTC resettable fuse with resistance of 0.13 ohm and rated power dissipation of 0.8 W. It is used for temperature sensing applications, featuring radial terminal placement and rectangular package shape. Operating temperatures range from -40 to 85 °C.
311P18-07S7R6
Quality Thermistor
NTC THERMISTOR; Mounting Type: THROUGH HOLE MOUNT; Resistance: 10000 ohm; Maximum Operating Temperature: 90 Cel; Tolerance: .81 %; Thermistor Application: TEMPERATURE SENSING;
B72205S0300K101
The TDK B72205S0300K101 is a VARISTOR with 30V max circuit RMS voltage and 0.9J energy absorption. It operates b/w -40 to 105°C, ideal for surge protection in electronic circuits. With radial terminal placement and metal oxide technology, it offers reliable performance in various applications.
NCP18XQ102J03RB
Murata Manufacturing's NCP18XQ102J03RB is a Non-linear Resistor with 1000 ohm resistance, operating voltage of 5V, and thermal sensitivity index of 3650K. It is used for temperature sensing applications, featuring dual-ended terminals in a rectangular SMT package. Operating temperature ranges from -40 to 125°C.
RUEF900
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Resistance: .02 ohm; Rated Power Dissipation (P): 4.2 W; Maximum Operating Temperature: 85 Cel; Terminal Shape: WIRE;
V275LA20APX1347
V275LA20APX1347 by Littelfuse is a VARISTOR with 275V URac, 75J energy capacity, and -55 to 125°C operating temp. Used for TEMPERATURE COMPENSATION in circuits requiring protection against voltage surges. RADIAL package style with THROUGH HOLE MOUNT for easy installation.
MF-MSMF020-2
The Bourns MF-MSMF020-2 is a PTC resettable fuse with a resistance of 0.4 ohm and an operating voltage of 30V. It is commonly used for overcurrent protection in various applications, featuring dual-ended terminal placement and surface mount mounting type.
ERTJ0EG103FA
Panasonic
Panasonic ERTJ0EG103FA is a NTC thermistor with 10000 ohm resistance, 1% tolerance, and 125°C max operating temp. Ideal for temperature compensation in SMT applications due to its dual-ended terminals and compact rectangular package design.
B57235-S100-M
TDK B57235-S100-M NTC Thermistor with 10 ohm resistance, 265V URac, and 1.8W power dissipation. Ideal for temperature sensing applications with a thermal sensitivity index of 2900 K and operating range from -55°C to 170°C.
NTCLE400E3472HA
Vishay Intertechnology NTCLE400E3472HA is a 4700 ohm NTC thermistor with -40 to 85°C operating range. Featuring 3% tolerance, it has thermal sensitivity index of 3977 K and 0.25 W power dissipation. Ideal for temperature sensing applications, this radial thermistor is chassis mountable with flexible wire terminals.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved