Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
HEAT SHRINK SOLDER SLEEVE; Maximum Operating Temperature: 175 Cel; Maximum Wire Size: 0 AWG;
Median Price
$2.590
Lifecycle Status
Suppliers In-Stock
4
In-Stock Inventory
1k+
TTI
1+ parts
-
100+ parts
1k+ parts
10k+ parts
Nova Conductors
$8.240
Vyrian
Resion
Netroflash
$8.075
AZTECH Wire
$12.510
Heat Shrinks S03-08-R-100 attributes and parameters. Explore more Heat Shrinks devices from TE Connectivity
Connector Accessory Type:
Maximum Operating Temperature:
Maximum Wire Size:
TE Connectivity is a global leader in the design and production of innovative connectors and sensors for multiple industries, such as automotive, industrial equipment, data communication systems, aerospace, defense, medical, oil and gas, consumer electronics and energy. It is an American-Swiss domiciled firm that has been providing high-quality products to its customers since 1907.
CEO
Terrence R. Curtin
Executive VP, CFO
Heath A. Mitts
Senior VP, Principal Accounting Officer
Robert J. Ott
1N4148
Panjit International
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SMBJ18CA
International Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.1 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
STM32H743BIT6
STMicroelectronics
STM32H743BIT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, 208 terminals, and 1085440 bytes of RAM. It features 2 DAC channels, 32 ADC channels, and operates at a max clock frequency of 48 MHz. Ideal for industrial applications requiring high-speed processing and extensive peripheral connectivity.
BSS84PH6327XTSA2
Infineon Technologies
BSS84PH6327XTSA2 by Infineon is a P-CHANNEL FET with 60V DS breakdown voltage, ideal for switching applications. It features a single configuration with built-in diode and operates in enhancement mode. With a max drain current of 0.17A and on-resistance of 8 ohm, it offers reliable performance in small outline packages.
SS14
Taitron Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAT54C-7-F
Diodes Incorporated
BAT54C-7-F by Diodes Inc. is a Schottky rectifier diode with common cathode, 2 elements, and max forward voltage of 0.24V. Ideal for applications requiring fast reverse recovery time of 0.005 us, such as in small outline packages for surface mount technology at temperatures ranging from -65 to 150°C.
Sinyork
RECTIFIER DIODE; Surface Mount: NO; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Output Current: .15 A; Maximum Repetitive Peak Reverse Voltage: 100 V; No. of Phases: 1;
FDN306P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Maximum Drain Current (Abs) (ID): 2.6 A; Operating Mode: ENHANCEMENT MODE;
BAV99
Toshiba
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Shenzhen Yixinsemi Electronics
1N4148W-T
Rectron
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
North American Philips Discrete Products Div
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Operating Mode: ENHANCEMENT MODE; Maximum Drain Current (ID): .115 A;
PIC18F4550-I/P
Microchip Technology
PIC18F4550-I/P by Microchip Technology is an 8-bit microcontroller with a max clock frequency of 48 MHz. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it ideal for industrial applications requiring low power consumption and high-speed data processing. With 2048 RAM bytes and 256 Data EEPROM size, this CMOS technology-based microcontroller offers versatile performance in various embedded systems.
LM317TG
Onsemi
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Minimum Input-Output Voltage Differential: 3 V; Qualification Status: Not Qualified; No. of Functions: 1;
AT90CAN128-16AUR
AT90CAN128-16AUR by Microchip: 16 MHz clock, 8-bit data RAM, and 131072 ROM words. Ideal for industrial applications with CAN, SPI, TWI connectivity and low power mode. Contains 4 timers, 8 ADC channels, and supports up to 10-bit analog to digital conversion.
1N4148WS
Daco Semiconductor
MBR0520LT3G
MBR0520LT3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, ideal for applications requiring high-speed switching and low power loss in compact electronic devices. The package style is small outline, making it suitable for surface mount designs in various electronics.
2N2222A
Diotec Semiconductor Ag
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; Maximum Time At Peak Reflow Temperature (s): 10;
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Time At Peak Reflow Temperature (s): 40; Minimum DS Breakdown Voltage: 60 V;
588742-000
TE Connectivity
HEAT SHRINK SOLDER SLEEVE; Wire Gauge (AWG): 24; Diameter: 5.95 mm; Maximum Wire Size: 24 AWG; Construction: SINGLE WALL; Jacket Material: CROSSLINKED MODIFIED POLYVINYLIDENE FLUORIDE;
M83519/2-8
HEAT SHRINK SOLDER SLEEVE; Construction: SINGLE WALL; Jacket Material: CROSSLINKED POLYVINYLIDENE FLUORIDE;
382A023-25/225-0
TE Connectivity's 382A023-25/225-0 is a DUAL WALL heat shrink with ELASTOMER jacket, operating from -75°C to 150°C. It accommodates up to 0 AWG wire and is ideal for electrical insulation in various applications.
RNF-100-1-4-SP
HEAT SHRINK TUBE; Maximum Wire Size: 0 AWG; Minimum Operating Temperature: -55 Cel; Jacket Material: POLYOLEFIN; Construction: SINGLE WALL; Additional Features: APPROVAL: VDE;
M23053/16-004-0
Defense Logistics Agency
HEAT SHRINK TUBE; Assembly Item Name: TAPER SLEEVE; Jacket Material: ELASTOMER POLYOLEFIN; IEC Conformity: NO; DIN Conformity: NO; Construction: SINGLE WALL;
DR-25-1/2-0-SP
HEAT SHRINK TUBE; Jacket Material: CROSSLINKED ELASTOMER; Maximum Wire Size: 0 AWG; Wire Gauge (AWG): 0; Minimum Operating Temperature: -75 Cel; Construction: SINGLE WALL;
M23053/5-106-0
HEAT SHRINK TUBE; Maximum Wire Size: 0 AWG; Jacket Material: IRRADIATED MODIFIED POLYOLEFIN; Maximum Operating Temperature: 135 Cel; Minimum Operating Temperature: -55 Cel; Construction: SINGLE WALL;
M83519/2-10
HEAT SHRINK TUBE; Jacket Material: POLYVIMYLIDENE FLUORIDE;
HX-SCE-1K-3.2-50-9
HEAT SHRINK MARKER SLEEVE; Minimum Operating Temperature: -55 Cel; Maximum Wire Size: 0 AWG; Jacket Material: POLYOLEFIN; Maximum Operating Temperature: 105 Cel; Wire Gauge (AWG): 0;
M23053/4-303-0
HEAT SHRINK TUBE; Wire Gauge (AWG): 0; Maximum Wire Size: 0 AWG; Construction: DUAL WALL; Jacket Material: IRRADIATED MODIFIED POLYOLEFIN; Maximum Operating Temperature: 110 Cel;
S01-02-R
HEAT SHRINK SOLDER SLEEVE; Jacket Material: CROSSLINKED MODIFIED POLYVINYLIDENE FLUORIDE; Construction: SINGLE WALL;
M83519/1-5
M83519/2-7
Sumitomo Electric Industries
HEAT SHRINK SOLDER SLEEVE; Jacket Material: POLYVINYLIDENE FLUORIDE;
RT-375-1/4-X-STK
HEAT SHRINK TUBE; Jacket Material: CROSSLINKED FLUOROPOLYMER; Construction: SINGLE WALL;
DR-25-1/4-0-SP
HEAT SHRINK TUBE; Jacket Material: CROSSLINKED ELASTOMER; Maximum Wire Size: 0 AWG; Construction: SINGLE WALL; Maximum Operating Temperature: 150 Cel; Wire Gauge (AWG): 0;
S02-17-R-3
HEAT SHRINK SOLDER SLEEVE; Terminal Type: SOLDER; Construction: SINGLE WALL; Maximum Wire Size: 0 AWG; Diameter: 2.65 mm;
VERSAFIT-3/16-9-SP
HEAT SHRINK TUBE; Additional Features: REFERENCE STANDARD: CSA; UL; Construction: SINGLE WALL; Jacket Material: IRRADIATED MODIFIED POLYOLEFIN;
RNF-100-1/16-RD-STK
HEAT SHRINK TUBE; Wire Gauge (AWG): 0; Minimum Operating Temperature: -55 Cel; Jacket Material: POLYOLEFIN; Additional Features: APPROVAL: VDE; Construction: SINGLE WALL;
222K142-25/225-0
TE Connectivity's 222K142-25/225-0 heat shrink features dual wall construction with elastomer jacket material. It supports wire sizes up to 0 AWG, with a min cable entry of 7.1" and max of 17". Ideal for applications requiring temperature resistance from -75°C to 150°C.
S02-10-RCS453
HEAT SHRINK SOLDER SLEEVE; Jacket Material: CROSSLINKED POLYVINYLIDENE FLUORIDE; Construction: SINGLE WALL;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
S03-03-R-100
HEAT SHRINK SOLDER SLEEVE; Maximum Operating Temperature: 150 Cel; Maximum Wire Size: 0 AWG; Wire Gauge (AWG): 0; Jacket Material: CROSSLINKED MODIFIED POLYVINYLIDENE FLUORIDE; Construction: SINGLE WALL;
S03-03-R
HEAT SHRINK SOLDER SLEEVE; Maximum Wire Size: 0 AWG; Maximum Operating Temperature: 150 Cel; Jacket Material: CROSSLINKED MODIFIED POLYVINYLIDENE FLUORIDE; Diameter: 5.08 mm; Construction: SINGLE WALL;
S03-03-R-100CS405
HEAT SHRINK SOLDER SLEEVE; Maximum Operating Temperature: 150 Cel; Maximum Wire Size: 0 AWG;
S03-03-R-100CS244
S03-03-R-9035-100
HEAT SHRINK SOLDER SLEEVE; Construction: SINGLE WALL; Maximum Wire Size: 0 AWG; Jacket Material: CROSSLINKED MODIFIED POLYVINYLIDENE FLUORIDE; Wire Gauge (AWG): 0; Maximum Operating Temperature: 150 Cel;
S03-01-R
HEAT SHRINK SOLDER SLEEVE; Maximum Wire Size: 0 AWG; Diameter: 2.7 mm; Maximum Operating Temperature: 150 Cel;
S03-03-R-9035
S03-08-R-100HN
HEAT SHRINK SOLDER SLEEVE; Construction: SINGLE WALL; Jacket Material: CROSSLINKED MODIFIED POLYVINYLIDENE FLUORIDE; Maximum Operating Temperature: 150 Cel; Wire Gauge (AWG): 0; Maximum Wire Size: 0 AWG;
S03-03-RCS1155
HEAT SHRINK SOLDER SLEEVE; Maximum Wire Size: 0 AWG; Maximum Operating Temperature: 150 Cel;
S03-03-RCS405
S03-05-R-100
HEAT SHRINK SOLDER SLEEVE; Maximum Operating Temperature: 150 Cel; Construction: SINGLE WALL; Maximum Wire Size: 0 AWG; Jacket Material: CROSSLINKED MODIFIED POLYVINYLIDENE FLUORIDE; Wire Gauge (AWG): 0;
S03-05-R-100CS244
S03-08-R
HEAT SHRINK SOLDER SLEEVE; Diameter: 5.08 mm; Construction: SINGLE WALL; Wire Gauge (AWG): 0; Maximum Wire Size: 0 AWG; Maximum Operating Temperature: 150 Cel;
S03-05-R-100CS1147
S03-04-R-100CS1147
S03-04-RCS2204
HEAT SHRINK SOLDER SLEEVE; Maximum Operating Temperature: 150 Cel; Terminal Type: SOLDER; Maximum Wire Size: 0 AWG; Diameter: 6.45 mm;
S03-04-R-100
S03-06-R
HEAT SHRINK SOLDER SLEEVE; Diameter: 1.9 mm; Maximum Wire Size: 0 AWG; Maximum Operating Temperature: 150 Cel;
S03-02-R
HEAT SHRINK SOLDER SLEEVE; Jacket Material: CROSSLINKED MODIFIED POLYVINYLIDENE FLUORIDE; Maximum Wire Size: 0 AWG; Maximum Operating Temperature: 150 Cel; Diameter: 2.65 mm; Wire Gauge (AWG): 0;
S03-02-R-9035-100
HEAT SHRINK SOLDER SLEEVE; Maximum Operating Temperature: 150 Cel; Construction: SINGLE WALL; Wire Gauge (AWG): 0; Jacket Material: CROSSLINKED MODIFIED POLYVINYLIDENE FLUORIDE; Maximum Wire Size: 0 AWG;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved